Created attachment 303469 [details] `sudo btmon -w /dev/shm/linux-6.1-rc8-btmon.txt` Using Debian sid/unstable with Linux 6.1-rc8, *bluez* 5.66-1 and gnome-control-center *1:43.1-2*, going into the Bluetooth section of *gnome-control-center* and starting bluetoothd with `sudo systemctl start bluetooth.service` the *JBL GO 2* is not shown (pairing mode is activated). Only stopping bluetooth and starting it again, itβs showing up. Please find the btmon trace attached.
``` [Sa Dez 24 21:32:00 2022] calling af_alg_init+0x0/0x1000 [af_alg] @ 41404 [Sa Dez 24 21:32:00 2022] NET: Registered PF_ALG protocol family [Sa Dez 24 21:32:00 2022] initcall af_alg_init+0x0/0x1000 [af_alg] returned 0 after 1 usecs [Sa Dez 24 21:32:00 2022] calling algif_skcipher_init+0x0/0x1000 [algif_skcipher] @ 41405 [Sa Dez 24 21:32:00 2022] initcall algif_skcipher_init+0x0/0x1000 [algif_skcipher] returned 0 after 0 usecs [Sa Dez 24 21:32:00 2022] calling algif_hash_init+0x0/0x1000 [algif_hash] @ 41411 [Sa Dez 24 21:32:00 2022] initcall algif_hash_init+0x0/0x1000 [algif_hash] returned 0 after 0 usecs [Sa Dez 24 21:32:00 2022] calling crypto_cmac_module_init+0x0/0x1000 [cmac] @ 41415 [Sa Dez 24 21:32:00 2022] initcall crypto_cmac_module_init+0x0/0x1000 [cmac] returned 0 after 0 usecs [Sa Dez 24 21:32:06 2022] calling bnep_init+0x0/0xc0 [bnep] @ 41430 [Sa Dez 24 21:32:06 2022] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Sa Dez 24 21:32:06 2022] Bluetooth: BNEP filters: protocol multicast [Sa Dez 24 21:32:06 2022] Bluetooth: BNEP socket layer initialized [Sa Dez 24 21:32:06 2022] initcall bnep_init+0x0/0xc0 [bnep] returned 0 after 6 usecs [Sa Dez 24 21:32:06 2022] Bluetooth: MGMT ver 1.22 [Sa Dez 24 21:32:06 2022] calling rfcomm_init+0x0/0xda [rfcomm] @ 41433 [Sa Dez 24 21:32:06 2022] Bluetooth: RFCOMM TTY layer initialized [Sa Dez 24 21:32:06 2022] Bluetooth: RFCOMM socket layer initialized [Sa Dez 24 21:32:06 2022] Bluetooth: RFCOMM ver 1.11 [Sa Dez 24 21:32:06 2022] initcall rfcomm_init+0x0/0xda [rfcomm] returned 0 after 87 usecs [Sa Dez 24 21:34:42 2022] calling uinput_misc_init+0x0/0x1000 [uinput] @ 41567 [Sa Dez 24 21:34:42 2022] initcall uinput_misc_init+0x0/0x1000 [uinput] returned 0 after 112 usecs [Sa Dez 24 21:34:42 2022] input: JBL GO 2 (AVRCP) as /devices/virtual/input/input20 [Sa Dez 24 21:35:58 2022] input: JBL GO 2 (AVRCP) as /devices/virtual/input/input21 [Sa Dez 24 21:36:10 2022] Bluetooth: hci0: Opcode 0x2005 failed: -22 [Sa Dez 24 21:36:10 2022] Bluetooth: hci0: Opcode 0x200b failed: -22 [Sa Dez 24 21:36:12 2022] Bluetooth: hci0: command 0x200b tx timeout [Sa Dez 24 21:36:31 2022] input: JBL GO 2 (AVRCP) as /devices/virtual/input/input22 [Sa Dez 24 21:48:47 2022] Bluetooth: hci0: Opcode 0x2005 failed: -22 [Sa Dez 24 21:48:47 2022] Bluetooth: hci0: Opcode 0x200b failed: -22 [Sa Dez 24 21:48:49 2022] Bluetooth: hci0: command 0x200b tx timeout ```