16367 – cannot set the tx power over 20 dBm, wrong contry code

Bug 16367 - cannot set the tx power over 20 dBm, wrong contry code

Summary: cannot set the tx power over 20 dBm, wrong contry code

Status:	CLOSED DOCUMENTED

Alias:	None

Product:	Drivers
Classification:	Unclassified
Component:	network-wireless (show other bugs)
Hardware:	All Linux

Importance:	P1 normal
Assignee:	drivers_network-wireless@kernel-bugs.osdl.org

URL:
Keywords:

Depends on:
Blocks:

Reported:	2010-07-11 22:08 UTC by krbjhvee
Modified:	2011-01-21 18:13 UTC (History)
CC List:	2 users (show)

See Also:
Kernel Version:	Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
Subsystem:
Regression:	No
Bisected commit-id:

Attachments
Add an attachment (proposed patch, testcase, etc.)

Description krbjhvee 2010-07-11 22:08:51 UTC

My pc is a Panasonic CF-29

My card is : ENGENIUS EMP-8602+S 802.11a/b/g 600mW ( 28 dbm )

I run Kubuntu 10.4

I cannot set the contry code to NO  ( Norway )

iwconfig outputs:

wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thrff Fragment thrff Encryption keyff Power Managementff

iwconfig wlan0 txpower 600mw Error for wireless request "Set Tx Power" (8B26) : SET failed on device wlan0 ; Invalid argument.

i have tried: iwpriv wlan0 highpower 1 it puts out : wlan0 no private ioctls.

iwlist wlan0 txpower wlan0 unknown transmit-power information.

    Current Tx-Power=20 dBm (100 mW)

iw list Wiphy phy0

    Band 1:

        Frequencies:

    * 2412 MHz [1] (20.0 dBm)
    * 2417 MHz [2] (20.0 dBm)
    * 2422 MHz [3] (20.0 dBm)
    * 2427 MHz [4] (20.0 dBm)
    * 2432 MHz [5] (20.0 dBm)
    * 2437 MHz [6] (20.0 dBm)
    * 2442 MHz [7] (20.0 dBm)
    * 2447 MHz [8] (20.0 dBm)
    * 2452 MHz [9] (20.0 dBm)
    * 2457 MHz [10] (20.0 dBm)
    * 2462 MHz [11] (20.0 dBm)
    * 2467 MHz [12] (disabled)
    * 2472 MHz [13] (disabled)
    * 2484 MHz [14] (disabled) 

        Bitrates (non-HT):

    * 1.0 Mbps
    * 2.0 Mbps (short preamble supported)
    * 5.5 Mbps (short preamble supported)
    * 11.0 Mbps (short preamble supported)
    * 6.0 Mbps
    * 9.0 Mbps
    * 12.0 Mbps
    * 18.0 Mbps
    * 24.0 Mbps
    * 36.0 Mbps
    * 48.0 Mbps
    * 54.0 Mbps 

    Band 2:

        Frequencies:

    * 5180 MHz [36] (20.0 dBm) (passive scanning, no IBSS)
    * 5200 MHz [40] (20.0 dBm) (passive scanning, no IBSS)
    * 5220 MHz [44] (20.0 dBm) (passive scanning, no IBSS)
    * 5240 MHz [48] (20.0 dBm) (passive scanning, no IBSS)
    * 5260 MHz [52] (disabled)
    * 5280 MHz [56] (disabled)
    * 5300 MHz [60] (disabled)
    * 5320 MHz [64] (disabled)
    * 5500 MHz [100] (disabled)
    * 5520 MHz [104] (disabled)
    * 5540 MHz [108] (disabled)
    * 5560 MHz [112] (disabled)
    * 5580 MHz [116] (disabled)
    * 5600 MHz [120] (disabled)
    * 5620 MHz [124] (disabled)
    * 5640 MHz [128] (disabled)
    * 5660 MHz [132] (disabled)
    * 5680 MHz [136] (disabled)
    * 5700 MHz [140] (disabled)
    * 5745 MHz [149] (20.0 dBm) (passive scanning, no IBSS)
    * 5765 MHz [153] (20.0 dBm) (passive scanning, no IBSS)
    * 5785 MHz [157] (20.0 dBm) (passive scanning, no IBSS)
    * 5805 MHz [161] (20.0 dBm) (passive scanning, no IBSS)
    * 5825 MHz [165] (20.0 dBm) (passive scanning, no IBSS) 

        Bitrates (non-HT):

    * 6.0 Mbps
    * 9.0 Mbps
    * 12.0 Mbps
    * 18.0 Mbps
    * 24.0 Mbps
    * 36.0 Mbps
    * 48.0 Mbps
    * 54.0 Mbps 

    max # scan SSIDs: 4 Supported interface modes:

    * IBSS
    * managed
    * AP
    * AP/VLAN
    * monitor
    * mesh point 

    Supported commands:

    * new_interface
    * set_interface
    * new_key
    * new_beacon
    * new_station
    * new_mpath
    * set_mesh_params
    * set_bss
    * authenticate
    * associate
    * deauthenticate
    * disassociate
    * join_ibss
    * set_wiphy_netns
    * connect
    * disconnect 

dmesg output:

g
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable)
[    0.000000]  BIOS-e820: 000000003f6f0000 - 000000003f6fa000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f6fa000 - 000000003f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-DFFFF write-back
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 03F800000 mask FFF800000 uncachable                                                                           
[    0.000000]   3 disabled                                                                                                           
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003f6f0000 (usable)
[    0.000000]  modified: 000000003f6f0000 - 000000003f6fa000 (ACPI data)
[    0.000000]  modified: 000000003f6fa000 - 000000003f700000 (ACPI NVS)
[    0.000000]  modified: 000000003f700000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 2eceb000 - 2f973e46
[    0.000000] ACPI: RSDP 000f7310 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 3f6f3896 00030 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3f6f9f54 00084 (v02 MATBIO CF29-3   06040000 MAT  00000001)
[    0.000000] ACPI: DSDT 3f6f3c3d 06317 (v01 MATBIO   CF29-3 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 3f6fafc0 00040
[    0.000000] ACPI: BOOT 3f6f9fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 3f6f38c6 0026F (v01 MATBIO   CF29-3 06040000 MSFT 0100000E)
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [002eceb000 - 002f973e46]          RAMDISK ==> [002eceb000 - 002f973e46]
[    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #6 [00008da000 - 00008dd1c8]              BRK ==> [00008da000 - 00008dd1c8]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003f6f0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f6f0
[    0.000000] On node 0 totalpages: 259711
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32244 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u4194304
[    0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257681
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=61b75668-0109-465b-8461-b098561a98f0 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5196160 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f6f0)
[    0.000000] Memory: 1003356k/1039296k available (4673k kernel code, 34988k reserved, 2122k data, 656k init, 129992k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1396.552 MHz processor.
[    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.10 BogoMIPS (lpj=5586208)
[    0.004031] Security Framework initialized
[    0.004062] AppArmor: AppArmor initialized
[    0.004073] Mount-cache hash table entries: 512
[    0.004235] Initializing cgroup subsys ns
[    0.004241] Initializing cgroup subsys cpuacct
[    0.004247] Initializing cgroup subsys memory
[    0.004259] Initializing cgroup subsys devices
[    0.004263] Initializing cgroup subsys freezer
[    0.004266] Initializing cgroup subsys net_cls
[    0.004297] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004301] CPU: L2 cache: 2048K
[    0.004308] mce: CPU supports 5 MCE banks
[    0.004326] Performance Events: 
[    0.004330] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.004333] no hardware sampling interrupt available.
[    0.004336] p6 PMU driver.
[    0.004344] ... version:                0
[    0.004347] ... bit width:              32
[    0.004349] ... generic registers:      2
[    0.004352] ... value mask:             00000000ffffffff
[    0.004355] ... max period:             000000007fffffff
[    0.004358] ... fixed-purpose events:   0
[    0.004361] ... event mask:             0000000000000003
[    0.004367] Checking 'hlt' instruction... OK.
[    0.021087] SMP alternatives: switching to UP code
[    0.030476] Freeing SMP alternatives: 19k freed
[    0.030487] ACPI: Core revision 20090903
[    0.044011] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.044018] ftrace: allocating 21771 entries in 43 pages
[    0.048087] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.048093] weird, boot CPU (#0) not listed by the BIOS.
[    0.048096] SMP motherboard not detected.
[    0.048100] Local APIC not detected. Using dummy APIC emulation.
[    0.048103] SMP disabled
[    0.048248] Brought up 1 CPUs
[    0.048251] Total of 1 processors activated (2793.10 BogoMIPS).
[    0.049754] CPU0 attaching NULL sched-domain.
[    0.049958] devtmpfs: initialized
[    0.050469] regulator: core version 0.5
[    0.052011] Time: 20:23:03  Date: 07/11/10
[    0.052071] NET: Registered protocol family 16
[    0.052230] EISA bus registered
[    0.052242] ACPI: bus type pci registered
[    0.052484] PCI: PCI BIOS revision 2.10 entry at 0xfd952, last bus=4
[    0.052487] PCI: Using configuration type 1 for base access
[    0.053803] bio: create slab <bio-0> at 0
[    0.054617] ACPI: EC: Look up EC in DSDT
[    0.060461] ACPI: Interpreter enabled
[    0.060485] ACPI: (supports S0 S3 S4 S5)
[    0.064028] ACPI: Using PIC for interrupt routing
[    0.112341] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.117932] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.118690] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.118745] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe4000000-0xe7ffffff]
[    0.118879] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[    0.118886] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
[    0.118893] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[    0.118915] pci 0000:00:02.0: supports D1
[    0.118935] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[    0.118942] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
[    0.118966] pci 0000:00:02.1: supports D1
[    0.119041] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.119093] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.119145] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.119204] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff]
[    0.119260] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.119266] pci 0000:00:1d.7: PME# disabled
[    0.119352] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    0.119357] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[    0.119382] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.119390] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.119398] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.119406] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.119414] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[    0.119422] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.119473] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[    0.119517] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[    0.119525] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[    0.119533] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff]
[    0.119540] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff]
[    0.120014] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.120019] pci 0000:00:1f.5: PME# disabled
[    0.120093] pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.120111] pci 0000:02:00.0: supports D1 D2
[    0.120115] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.120120] pci 0000:02:00.0: PME# disabled
[    0.120151] pci 0000:02:00.1: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.120168] pci 0000:02:00.1: supports D1 D2
[    0.120171] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.120177] pci 0000:02:00.1: PME# disabled
[    0.120215] pci 0000:02:01.0: reg 10 32bit mmio: [0xe0200000-0xe020ffff]
[    0.120286] pci 0000:02:02.0: reg 10 io port: [0x3000-0x30ff]
[    0.120294] pci 0000:02:02.0: reg 14 32bit mmio: [0xe0210000-0xe02100ff]
[    0.120332] pci 0000:02:02.0: supports D1 D2
[    0.120335] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[    0.120341] pci 0000:02:02.0: PME# disabled
[    0.120378] pci 0000:00:1e.0: transparent bridge
[    0.120384] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[    0.120390] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
[    0.120431] pci_bus 0000:00: on NUMA node 0
[    0.120437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.120543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.124211] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[    0.124393] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[    0.124571] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[    0.124749] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[    0.124927] ACPI: PCI Interrupt Link [LNKE] (IRQs 9) *0, disabled.
[    0.125106] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[    0.125284] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[    0.125463] ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
[    0.125592] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.125603] vgaarb: loaded
[    0.125755] SCSI subsystem initialized
[    0.125808] libata version 3.00 loaded.
[    0.125909] usbcore: registered new interface driver usbfs
[    0.125926] usbcore: registered new interface driver hub
[    0.125962] usbcore: registered new device driver usb
[    0.126122] ACPI: WMI: Mapper loaded
[    0.126125] PCI: Using ACPI for IRQ routing
[    0.126305] NetLabel: Initializing
[    0.126308] NetLabel:  domain hash size = 128
[    0.126310] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.126328] NetLabel:  unlabeled traffic allowed by default
[    0.126364] Switching to clocksource tsc
[    0.128000] AppArmor: AppArmor Filesystem Enabled
[    0.128000] pnp: PnP ACPI init
[    0.128000] ACPI: bus type pnp registered
[    0.186269] pnp: PnP ACPI: found 11 devices
[    0.186272] ACPI: ACPI bus type pnp unregistered
[    0.186279] PnPBIOS: Disabled by ACPI PNP
[    0.186294] system 00:01: iomem range 0xfec10000-0xfec1ffff has been reserved
[    0.186298] system 00:01: iomem range 0xcc800-0xcffff could not be reserved
[    0.186308] system 00:02: ioport range 0x1000-0x107f has been reserved
[    0.186313] system 00:02: ioport range 0x1180-0x11bf has been reserved
[    0.186317] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.186321] system 00:02: ioport range 0x600-0x61f has been reserved
[    0.186326] system 00:02: ioport range 0x362-0x362 has been reserved
[    0.186330] system 00:02: ioport range 0x366-0x366 has been reserved
[    0.186334] system 00:02: ioport range 0xfe00-0xfe01 has been reserved
[    0.186339] system 00:02: ioport range 0x580-0x587 has been reserved
[    0.186344] system 00:02: iomem range 0xff800000-0xffffffff could not be reserved
[    0.221072] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.221076] pci 0000:00:01.0:   IO window: disabled
[    0.221081] pci 0000:00:01.0:   MEM window: disabled
[    0.221085] pci 0000:00:01.0:   PREFETCH window: disabled
[    0.221102] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
[    0.221106] pci 0000:02:00.0:   IO window: 0x003400-0x0034ff
[    0.221112] pci 0000:02:00.0:   IO window: 0x003800-0x0038ff
[    0.221117] pci 0000:02:00.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.221123] pci 0000:02:00.0:   MEM window: 0x4c000000-0x4fffffff
[    0.221129] pci 0000:02:00.1: CardBus bridge, secondary bus 0000:04
[    0.221132] pci 0000:02:00.1:   IO window: 0x003c00-0x003cff
[    0.221138] pci 0000:02:00.1:   IO window: 0x001400-0x0014ff
[    0.221143] pci 0000:02:00.1:   PREFETCH window: 0x44000000-0x47ffffff
[    0.221149] pci 0000:02:00.1:   MEM window: 0x50000000-0x53ffffff
[    0.221154] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.221159] pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
[    0.221166] pci 0000:00:1e.0:   MEM window: 0xe0200000-0xe02fffff
[    0.221172] pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x47ffffff
[    0.221190] pci 0000:00:1e.0: setting latency timer to 64
[    0.221392] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[    0.221395] PCI: setting IRQ 9 as level-triggered
[    0.221401] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[    0.221583] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[    0.221588] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[    0.221595] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.221610] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.221614] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.221618] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
[    0.221622] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x47ffffff]
[    0.221626] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.221630] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.221634] pci_bus 0000:03: resource 0 io:  [0x3400-0x34ff]
[    0.221638] pci_bus 0000:03: resource 1 io:  [0x3800-0x38ff]
[    0.221642] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.221646] pci_bus 0000:03: resource 3 mem: [0x4c000000-0x4fffffff]
[    0.221650] pci_bus 0000:04: resource 0 io:  [0x3c00-0x3cff]
[    0.221654] pci_bus 0000:04: resource 1 io:  [0x1400-0x14ff]
[    0.221658] pci_bus 0000:04: resource 2 pref mem [0x44000000-0x47ffffff]
[    0.221662] pci_bus 0000:04: resource 3 mem: [0x50000000-0x53ffffff]
[    0.221703] NET: Registered protocol family 2
[    0.221819] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.222228] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.223237] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.223910] TCP: Hash tables configured (established 131072 bind 65536)
[    0.223914] TCP reno registered
[    0.224066] NET: Registered protocol family 1
[    0.224103] pci 0000:00:02.0: Boot video device
[    0.224321] Simple Boot Flag at 0x41 set to 0x1
[    0.224446] cpufreq-nforce2: No nForce2 chipset.
[    0.224479] Scanning for low memory corruption every 60 seconds
[    0.224636] audit: initializing netlink socket (disabled)
[    0.224660] type=2000 audit(1278879783.221:1): initialized
[    0.239549] Trying to unpack rootfs image as initramfs...
[    0.257932] highmem bounce pool size: 64 pages
[    0.257942] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.260173] VFS: Disk quotas dquot_6.5.2
[    0.260257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.261129] fuse init (API version 7.13)
[    0.261254] msgmni has been set to 1706
[    0.266187] alg: No test for stdrng (krng)
[    0.266283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.266288] io scheduler noop registered
[    0.266291] io scheduler anticipatory registered
[    0.266293] io scheduler deadline registered
[    0.266349] io scheduler cfq registered (default)
[    0.266527] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.266559] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.269337] ACPI: AC Adapter [AC] (on-line)
[    0.269437] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.269447] ACPI: Power Button [PWRB]
[    0.269513] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.278293] ACPI: Lid Switch [LID]
[    0.278393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.278398] ACPI: Power Button [PWRF]
[    0.278872] Marking TSC unstable due to TSC halts in idle
[    0.278928] processor LNXCPU:00: registered as cooling_device0
[    0.289673] Switching to clocksource acpi_pm
[    0.358228] thermal LNXTHERM:01: registered as thermal_zone0
[    0.358245] ACPI: Thermal Zone [TZC] (42 C)
[    0.360415] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.360525] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.361027] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.362476] brd: module loaded
[    0.363140] loop: module loaded
[    0.363259] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.363407] ata_piix 0000:00:1f.1: version 2.13
[    0.363488] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    0.363496] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.363710] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[    0.363716] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
[    0.363774] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.368595] scsi0 : ata_piix
[    0.368751] isapnp: Scanning for PnP cards...
[    0.374308] scsi1 : ata_piix
[    0.430710] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.430716] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.431360] Fixed MDIO Bus: probed
[    0.431417] PPP generic driver version 2.4.2
[    0.431508] tun: Universal TUN/TAP device driver, 1.6
[    0.431511] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.431638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.431933] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[    0.431940] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9
[    0.431961] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.431966] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.432048] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.432121] ehci_hcd 0000:00:1d.7: debug port 1
[    0.435998] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.440534] ehci_hcd 0000:00:1d.7: irq 9, io mem 0xe0100000
[    0.449218] ACPI: Battery Slot [BATB] (battery absent)
[    0.460227] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.460406] usb usb1: configuration #1 chosen from 1 choice
[    0.460496] hub 1-0:1.0: USB hub found
[    0.460510] hub 1-0:1.0: 6 ports detected
[    0.460601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.460625] uhci_hcd: USB Universal Host Controller Interface driver
[    0.460699] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[    0.460712] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.460717] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.460774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.460803] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001820
[    0.460921] usb usb2: configuration #1 chosen from 1 choice
[    0.460957] hub 2-0:1.0: USB hub found
[    0.460967] hub 2-0:1.0: 2 ports detected
[    0.461227] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[    0.461232] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[    0.461240] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.461244] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.461289] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.461312] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001840
[    0.461438] usb usb3: configuration #1 chosen from 1 choice
[    0.461475] hub 3-0:1.0: USB hub found
[    0.461484] hub 3-0:1.0: 2 ports detected
[    0.461535] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
[    0.461543] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.461548] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.461598] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.461621] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001860
[    0.461744] usb usb4: configuration #1 chosen from 1 choice
[    0.461780] hub 4-0:1.0: USB hub found
[    0.461790] hub 4-0:1.0: 2 ports detected
[    0.461921] PNP: PS/2 Controller [PNP0303:K101,FJC6000:MOU2] at 0x60,0x64 irq 1,12
[    0.476207] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.478763] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.478971] mice: PS/2 mouse device common for all mice
[    0.479413] rtc_cmos 00:05: RTC can wake from S4
[    0.479473] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.479492] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    0.479674] device-mapper: uevent: version 1.0.3
[    0.482416] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.483895] device-mapper: multipath: version 1.1.0 loaded
[    0.483899] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.484775] EISA: Probing bus 0 at eisa.0
[    0.484785] Cannot allocate resource for EISA slot 1
[    0.484794] Cannot allocate resource for EISA slot 3
[    0.484817] EISA: Detected 0 cards.
[    0.487981] cpuidle: using governor ladder
[    0.488096] cpuidle: using governor menu
[    0.488732] TCP cubic registered
[    0.489030] NET: Registered protocol family 10
[    0.490014] lo: Disabled Privacy Extensions
[    0.490495] NET: Registered protocol family 17
[    0.490891] Using IPI No-Shortcut mode
[    0.491017] PM: Resume from disk failed.
[    0.491035] registered taskstats version 1
[    0.491791]   Magic number: 2:776:396
[    0.491992] rtc_cmos 00:05: setting system clock to 2010-07-11 20:23:04 UTC (1278879784)
[    0.491997] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.492000] EDD information not available.
[    0.551492] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.641729] ata2.00: ATAPI: CD-224E, 1.7A, max UDMA/33
[    0.641918] ata1.00: ATA-6: HTS424040M9AT00, MA2OA71A, max UDMA/100
[    0.641922] ata1.00: 78140160 sectors, multi 16: LBA48 
[    0.656752] ata2.00: configured for UDMA/33
[    0.657610] ata1.00: configured for UDMA/100
[    0.742478] ACPI: Battery Slot [BATA] (battery present)
[    1.087620] isapnp: No Plug & Play device found
[    1.087663] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    1.087882] scsi 0:0:0:0: Direct-Access     ATA      HTS424040M9AT00  MA2O PQ: 0 ANSI: 5
[    1.088171] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.088422] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.088487] sd 0:0:0:0: [sda] Write Protect is off
[    1.088491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.088524] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.088725]  sda:
[    1.089466] scsi 1:0:0:0: CD-ROM            TEAC     CD-224E          1.7A PQ: 0 ANSI: 5
[    1.095947] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[    1.095954] Uniform CD-ROM driver Revision: 3.20
[    1.096132] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.096216] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.104810]  sda1 sda2 < sda5 >
[    1.127614] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.206988] Freeing initrd memory: 12835k freed
[    1.220098] Freeing unused kernel memory: 656k freed
[    1.220874] Write protecting the kernel text: 4676k
[    1.220926] Write protecting the kernel read-only data: 1840k
[    1.244177] udev: starting version 151
[    1.265721] usb 4-1: configuration #1 chosen from 1 choice
[    1.509577] Linux agpgart interface v0.103
[    1.519264] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[    1.519380] ACPI: Video Device [GRFX] (multi-head: yes  rom: no  post: no)
[    1.559566] usbcore: registered new interface driver hiddev
[    1.565896] [drm] Initialized drm 1.1.0 20060810
[    1.571755] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[    1.572683] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[    1.584123] input: USB OpticalWheel Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input6
[    1.584245] generic-usb 0003:04FC:0013.0001: input,hidraw0: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:1d.2-1/input0
[    1.584280] usbcore: registered new interface driver usbhid
[    1.584284] usbhid: v2.6:USB HID core driver
[    1.584615] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.584644] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.589467] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[    1.600762] 8139too Fast Ethernet driver 0.9.28
[    1.600818] 8139too 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
[    1.603166] eth0: RealTek RTL8139 at 0x3000, 00:0b:97:32:66:ca, IRQ 9
[    1.634547] [drm] i915 disabling kernel modesetting for known bad device.
[    1.634578] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[    1.634585] pci 0000:00:02.0: setting latency timer to 64
[    1.639916] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.643617] vga16fb: initializing
[    1.643622] vga16fb: mapped to 0xc00a0000
[    1.643755] fb0: VGA16 VGA frame buffer device
[    1.762971] Console: switching to colour frame buffer device 80x30
[    2.281545] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   21.287858] Adding 1646620k swap on /dev/sda5.  Priority:-1 extents:1 across:1646620k 
[   21.317038] udev: starting version 151
[   21.460835] lp: driver loaded but no devices found
[   21.519608] input: Panasonic Laptop Support as /devices/virtual/input/input7
[   21.630280] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   21.645275] intel_rng: FWH not detected
[   21.824847] parport_pc 00:0a: reported by Plug and Play ACPI
[   21.824899] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   21.932246] lp0: using parport0 (interrupt-driven).
[   21.953771] ppdev: user-space parallel port driver
[   22.026873] yenta_cardbus 0000:02:00.0: CardBus bridge found [10f7:8338]
[   22.035996] cfg80211: Calling CRDA to update world regulatory domain
[   22.131677] type=1505 audit(1278879806.136:2):  operation="profile_load" pid=576 name="/sbin/dhclient3"
[   22.132570] type=1505 audit(1278879806.140:3):  operation="profile_load" pid=576 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   22.133039] type=1505 audit(1278879806.140:4):  operation="profile_load" pid=576 name="/usr/lib/connman/scripts/dhclient-script"
[   22.174211] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0c38, PCI irq 9
[   22.174218] yenta_cardbus 0000:02:00.0: Socket status: 30000006
[   22.174228] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[   22.174234] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[   22.174542] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[   22.174547] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
[   22.186934] ath5k 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[   22.186992] ath5k 0000:02:01.0: registered as 'phy0'
[   22.740175] input: PS/2 Touchpad as /devices/platform/i8042/serio1/input/input8
[   22.765887] input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio1/input/input9
[   22.933087] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[   22.933133] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   23.132817] type=1505 audit(1278879807.140:5):  operation="profile_replace" pid=726 name="/sbin/dhclient3"
[   23.133690] type=1505 audit(1278879807.140:6):  operation="profile_replace" pid=726 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   23.134165] type=1505 audit(1278879807.140:7):  operation="profile_replace" pid=726 name="/usr/lib/connman/scripts/dhclient-script"
[   23.137579] type=1505 audit(1278879807.144:8):  operation="profile_load" pid=728 name="/usr/lib/cups/backend/cups-pdf"
[   23.138622] type=1505 audit(1278879807.144:9):  operation="profile_load" pid=728 name="/usr/sbin/cupsd"
[   23.142058] type=1505 audit(1278879807.148:10):  operation="profile_load" pid=729 name="/usr/sbin/mysqld-akonadi"
[   23.147430] type=1505 audit(1278879807.152:11):  operation="profile_load" pid=730 name="/usr/sbin/tcpdump"
[   23.150927] ath: EEPROM regdomain: 0x37
[   23.150931] ath: EEPROM indicates we should expect a direct regpair map
[   23.150936] ath: Country alpha2 being used: AT
[   23.150939] ath: Regpair used: 0x37
[   23.190076] phy0: Selected rate control algorithm 'minstrel'
[   23.191026] ath5k phy0: Atheros AR5413 chip found (MAC: 0xa4, PHY: 0x61)
[   23.191401] cfg80211: Calling CRDA for country: AT
[   23.191468] yenta_cardbus 0000:02:00.1: CardBus bridge found [10f7:8338]
[   23.316675] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0c38, PCI irq 9
[   23.316682] yenta_cardbus 0000:02:00.1: Socket status: 30000006
[   23.316688] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[   23.316702] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[   23.316707] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: clean.
[   23.317015] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[   23.317020] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
[   23.460522] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.471746] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   23.768043] intel8x0_measure_ac97_clock: measured 55202 usecs (2660 samples)
[   23.768049] intel8x0: clocking to 48000
[   23.950159] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[   23.951783] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[   23.952798] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[   23.953394] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[   23.954185] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[   23.971373] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   23.980216] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   23.980910] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   23.981507] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   23.982304] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   33.840034] eth0: no IPv6 routers present

Comment 1 John W. Linville 2010-07-12 14:05:45 UTC

Actually, it looks like the kernel is working as intended.  While the "ath: Country alpha2 being used: AT" bit seems confusing, it is actually fine since AT and NO map to the same set of rules.

What I do not see is any reply from crda.  Do you have crda installed?

Comment 2 krbjhvee 2010-07-12 14:15:56 UTC

Yes, the command crda results in:
crda
COUNTRY environment variable not set.

Comment 3 krbjhvee 2010-07-12 14:17:54 UTC

(In reply to comment #1)
> Actually, it looks like the kernel is working as intended.  While the "ath:
> Country alpha2 being used: AT" bit seems confusing, it is actually fine since
> AT and NO map to the same set of rules.
> 
> What I do not see is any reply from crda.  Do you have crda installed?

Yes, the command crda results in:
crda
COUNTRY environment variable not set.

Comment 4 John W. Linville 2010-07-12 15:11:32 UTC

OK, at least that means it is installed.  FWIW, crda is not really meant to be run "by hand".

In any case, for some reason it doesn't seem to be providing the kernel with the information it is requesting.  I'll copy an Ubuntu-savvy person in hopes they can diagnose what I would guess is a distro-specific problem.

Comment 5 Leann Ogasawara 2010-07-13 00:13:49 UTC

Would it be possible for you to also open a bug in Launchpad against the Ubuntu kernel?  You can do this by running "ubuntu-bug linux" from the command line.  It will automatically file the bug in Launchpad as well as attach general debug information.  We can then track Ubuntu specific aspects in that bug report and relay any relevant upstream information here if necessary.  Thanks in advance.

Comment 6 krbjhvee 2010-07-13 09:13:02 UTC

(In reply to comment #5)
> Would it be possible for you to also open a bug in Launchpad against the
> Ubuntu
> kernel?  You can do this by running "ubuntu-bug linux" from the command line. 
> It will automatically file the bug in Launchpad as well as attach general
> debug
> information.  We can then track Ubuntu specific aspects in that bug report
> and
> relay any relevant upstream information here if necessary.  Thanks in
> advance.

Yes:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/604935

Comment 7 John W. Linville 2010-10-05 20:11:20 UTC

Any further info here?

Actually, I'm not sure there actually is a problem here.  The country code reported is fine as I explained above.  And the regulatory database is reporting a 20dBm max power for NO (and AT) anyway.

Comment 8 John W. Linville 2011-01-21 18:13:14 UTC

Closing based on comment 7 and the lack of response to it...

Note You need to log in before you can comment on or make changes to this bug.