4.3 also affected, prevision version too. For now I'm using rt3290sta. 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe DeviceName: WLAN Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter Physical Slot: 0-2 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at d3010000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 00-00-1d-d2-6b-70-2a-9c Kernel driver in use: rt2860 Kernel modules: rt2800pci, rt3290sta Kernel dmesg: [ 22.587759] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 22.587868] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 23.930960] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 25.263399] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 25.263412] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 26.952103] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 28.284226] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 28.284239] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 29.629834] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 30.962245] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 30.962256] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 32.314546] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 33.646823] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 33.646835] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 34.992230] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 36.324688] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 36.324700] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 37.673620] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 39.005813] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 39.005830] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 40.351447] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 41.683655] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 41.683667] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 43.035942] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 44.368201] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 44.368210] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 45.713632] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 47.046071] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 47.046086] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 48.394840] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 49.727245] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 49.727254] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 51.072917] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 52.408479] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 52.408490] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 53.760728] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 55.093009] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 55.093019] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 56.441929] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 57.774293] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 57.774306] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 59.123218] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 60.455453] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 60.455464] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 61.801090] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 63.133362] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 63.133374] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 64.482289] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 65.814568] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 65.814582] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 67.160157] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 68.492214] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 68.492223] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 69.844688] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 71.176962] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 71.176974] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5) [ 72.522512] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 73.854831] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] [ 73.854844] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
I have a similar issue. My wifi RT3290 based stop working after a while. [ 1744.578392] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 1744.688288] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 1745.125306] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 1745.235385] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 1745.345389] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 1745.719288] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 1745.829573] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 1745.939430] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 1748.420905] cfg80211: World regulatory domain updated: [ 1748.420909] cfg80211: DFS Master region: unset [ 1748.420911] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1748.420915] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1748.420918] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1748.420920] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1748.420933] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1748.420936] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1748.420938] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1748.420941] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1748.420943] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1749.520129] wlp3s0f0: authenticate with 10:bf:48:80:dd:88 [ 1749.523629] wlp3s0f0: send auth to 10:bf:48:80:dd:88 (try 1/3) [ 1749.552740] wlp3s0f0: send auth to 10:bf:48:80:dd:88 (try 2/3) [ 1749.588667] wlp3s0f0: send auth to 10:bf:48:80:dd:88 (try 3/3) [ 1749.616982] wlp3s0f0: authentication with 10:bf:48:80:dd:88 timed out
*** Bug 110251 has been marked as a duplicate of this bug. ***
*** Bug 103681 has been marked as a duplicate of this bug. ***
Is this still a problem on 4.10 ?
(In reply to Stanislaw Gruszka from comment #4) > Is this still a problem on 4.10 ? Yes, one more observation - if use "reboot"(not full shutdown), wifi in 80% cases doesn't work. May be problem in initialization(reset) of chip, that not full or not correctly reset some registers?
There is patch that may help; https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git/commit/?id=6715208d0a95ae417203f8e4a7937c1b4c4947f2 It was not merged with 4.10 as I thought, it's in 4.11-rc1.
I have been tested on 4.11 kernel, Seems no errors now.