After upgrading my Arch Linux laptop from 3.1.9 to 3.2.1, the built-in keyboard and trackpad on my laptop are no longer working in both X and at the console. Hmm... Actually, I note that the keyboard is working during the boot process where I need to enter the passphrase for my encrypted root device. But once bootup is complete, the keyboard and trackpad no longer work. (The built-in Atheros NIC also stopped working, but I'll save that for another bug report). Plugging in a USB keyboard and mouse works. The laptop is a Dell XPS 15z, running Arch Linux x64. $ uname -a Linux nakor 3.2.1-1-ARCH #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux $ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/nakor-root ro cryptdevice=/dev/sda4:crypt resume=/dev/nakor/swap quiet [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bac8f000 (usable) [ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bad36000 (reserved) [ 0.000000] BIOS-e820: 00000000bad36000 - 00000000bad43000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bad43000 - 00000000badcf000 (reserved) [ 0.000000] BIOS-e820: 00000000badcf000 - 00000000badd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badd0000 - 00000000badfc000 (reserved) [ 0.000000] BIOS-e820: 00000000badfc000 - 00000000badfe000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badfe000 - 00000000bae01000 (reserved) [ 0.000000] BIOS-e820: 00000000bae01000 - 00000000bae04000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae04000 - 00000000bae06000 (reserved) [ 0.000000] BIOS-e820: 00000000bae06000 - 00000000bae07000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae07000 - 00000000bae0a000 (reserved) [ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf1a000 (reserved) [ 0.000000] BIOS-e820: 00000000baf1a000 - 00000000baf1c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) [ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Dell System XPS 15Z/060G42, BIOS A03 06/01/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000 [ 0.000000] 0000000000 - 00bb000000 page 2M [ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000 [ 0.000000] 0100000000 - 023fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 23fe00000 @ bac85000-bac8f000 [ 0.000000] RAMDISK: 378ee000 - 37c6f000 [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP 00000000baff0000 000F4 (v03 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000baff3000 08A4A (v02 DELL SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf41000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000baff2000 000A5 (v32 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000bafef000 00038 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafee000 00098 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafed000 0003C (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000bafec000 00B3B (v01 NvORef NvOptTbl 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe9000 0003E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: DMAR 00000000bafe7000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe6000 0022E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000 [ 0.000000] NODE_DATA [000000023fdfb000 - 000000023fdfffff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bac8f [ 0.000000] 0: 0x000bafff -> 0x000bb000 [ 0.000000] 0: 0x00100000 -> 0x0023fe00 [ 0.000000] On node 0 totalpages: 2075165 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 744656 pages, LIFO batch:31 [ 0.000000] Normal zone: 20472 pages used for memmap [ 0.000000] Normal zone: 1289736 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bac8f000 - 00000000bad36000 [ 0.000000] PM: Registered nosave memory: 00000000bad36000 - 00000000bad43000 [ 0.000000] PM: Registered nosave memory: 00000000bad43000 - 00000000badcf000 [ 0.000000] PM: Registered nosave memory: 00000000badcf000 - 00000000badd0000 [ 0.000000] PM: Registered nosave memory: 00000000badd0000 - 00000000badfc000 [ 0.000000] PM: Registered nosave memory: 00000000badfc000 - 00000000badfe000 [ 0.000000] PM: Registered nosave memory: 00000000badfe000 - 00000000bae01000 [ 0.000000] PM: Registered nosave memory: 00000000bae01000 - 00000000bae04000 [ 0.000000] PM: Registered nosave memory: 00000000bae04000 - 00000000bae06000 [ 0.000000] PM: Registered nosave memory: 00000000bae06000 - 00000000bae07000 [ 0.000000] PM: Registered nosave memory: 00000000bae07000 - 00000000bae0a000 [ 0.000000] PM: Registered nosave memory: 00000000bae0a000 - 00000000bae1b000 [ 0.000000] PM: Registered nosave memory: 00000000bae1b000 - 00000000baf1a000 [ 0.000000] PM: Registered nosave memory: 00000000baf1a000 - 00000000baf1c000 [ 0.000000] PM: Registered nosave memory: 00000000baf1c000 - 00000000baf1f000 [ 0.000000] PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000 [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000 [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s82048 r8192 d24448 u262144 [ 0.000000] pcpu-alloc: s82048 r8192 d24448 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038304 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/nakor-root ro cryptdevice=/dev/sda4:crypt resume=/dev/nakor/swap quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8087864k/9435136k available (4279k kernel code, 1134476k absent, 212796k reserved, 4601k data, 728k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.003333] Detected 2693.510 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.47 BogoMIPS (lpj=8978366) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000024] Security Framework initialized [ 0.000028] AppArmor: AppArmor disabled by boot time parameter [ 0.000618] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002156] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002784] Mount-cache hash table entries: 256 [ 0.002878] Initializing cgroup subsys cpuacct [ 0.002882] Initializing cgroup subsys memory [ 0.002887] Initializing cgroup subsys devices [ 0.002889] Initializing cgroup subsys freezer [ 0.002891] Initializing cgroup subsys net_cls [ 0.002892] Initializing cgroup subsys blkio [ 0.002916] Disabled fast string operations [ 0.002918] CPU: Physical Processor ID: 0 [ 0.002919] CPU: Processor Core ID: 0 [ 0.002923] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002924] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002926] mce: CPU supports 7 MCE banks [ 0.002934] CPU0: Thermal monitoring handled by SMI [ 0.002940] using mwait in idle threads. [ 0.003712] ACPI: Core revision 20110623 [ 0.058340] ftrace: allocating 16773 entries in 66 pages [ 0.062913] DMAR: Host address width 36 [ 0.062914] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.062919] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.062921] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.062925] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.062927] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff [ 0.062928] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.062998] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.063000] HPET id 0 under DRHD base 0xfed91000 [ 0.063001] HPET id 0 under DRHD base 0xfed91000 [ 0.063001] HPET id 0 under DRHD base 0xfed91000 [ 0.063002] HPET id 0 under DRHD base 0xfed91000 [ 0.063003] HPET id 0 under DRHD base 0xfed91000 [ 0.063004] HPET id 0 under DRHD base 0xfed91000 [ 0.063005] HPET id 0 under DRHD base 0xfed91000 [ 0.063006] HPET id 0 under DRHD base 0xfed91000 [ 0.063210] Enabled IRQ remapping in x2apic mode [ 0.063212] Enabling x2apic [ 0.063212] Enabled x2apic [ 0.063218] Switched APIC routing to cluster x2apic. [ 0.063658] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.096646] CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz stepping 07 [ 0.201439] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.201443] PEBS disabled due to CPU errata. [ 0.201445] ... version: 3 [ 0.201446] ... bit width: 48 [ 0.201447] ... generic registers: 4 [ 0.201448] ... value mask: 0000ffffffffffff [ 0.201449] ... max period: 000000007fffffff [ 0.201450] ... fixed-purpose events: 3 [ 0.201451] ... event mask: 000000070000000f [ 0.221583] NMI watchdog enabled, takes one hw-pmu counter. [ 0.248116] Booting Node 0, Processors #1 [ 0.248122] smpboot cpu 1: start_ip = 98000 [ 0.341396] Disabled fast string operations [ 0.341410] CPU1: Thermal monitoring handled by SMI [ 0.361475] NMI watchdog enabled, takes one hw-pmu counter. [ 0.381422] #2 [ 0.381426] smpboot cpu 2: start_ip = 98000 [ 0.474679] Disabled fast string operations [ 0.474692] CPU2: Thermal monitoring handled by SMI [ 0.494774] NMI watchdog enabled, takes one hw-pmu counter. [ 0.514698] #3 [ 0.514701] smpboot cpu 3: start_ip = 98000 [ 0.607963] Disabled fast string operations [ 0.607975] CPU3: Thermal monitoring handled by SMI [ 0.628047] NMI watchdog enabled, takes one hw-pmu counter. [ 0.634623] Brought up 4 CPUs [ 0.634628] Total of 4 processors activated (21558.41 BogoMIPS). [ 0.638178] devtmpfs: initialized [ 0.638916] PM: Registering ACPI NVS region at bad36000 (53248 bytes) [ 0.638918] PM: Registering ACPI NVS region at badcf000 (4096 bytes) [ 0.638919] PM: Registering ACPI NVS region at badfc000 (8192 bytes) [ 0.638921] PM: Registering ACPI NVS region at bae01000 (12288 bytes) [ 0.638923] PM: Registering ACPI NVS region at bae06000 (4096 bytes) [ 0.638924] PM: Registering ACPI NVS region at bae0a000 (69632 bytes) [ 0.638926] PM: Registering ACPI NVS region at baf1a000 (8192 bytes) [ 0.638927] PM: Registering ACPI NVS region at baf1f000 (524288 bytes) [ 0.639546] print_constraints: dummy: [ 0.639579] NET: Registered protocol family 16 [ 0.639655] ACPI: bus type pci registered [ 0.639716] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.639718] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.652989] PCI: Using configuration type 1 for base access [ 0.653389] bio: create slab <bio-0> at 0 [ 0.653430] ACPI: Added _OSI(Module Device) [ 0.653432] ACPI: Added _OSI(Processor Device) [ 0.653433] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.653435] ACPI: Added _OSI(Processor Aggregator Device) [ 0.654646] ACPI: EC: Look up EC in DSDT [ 0.655798] ACPI: Executed 1 blocks of module-level executable AML code [ 0.674688] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.675477] ACPI: SSDT 00000000bae08718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.675806] ACPI: Dynamic OEM Table Load: [ 0.675808] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.684831] ACPI: SSDT 00000000baf0fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.685178] ACPI: Dynamic OEM Table Load: [ 0.685180] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.694726] ACPI: SSDT 00000000bae07d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.695048] ACPI: Dynamic OEM Table Load: [ 0.695050] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.706994] ACPI: Interpreter enabled [ 0.706997] ACPI: (supports S0 S3 S4 S5) [ 0.707013] ACPI: Using IOAPIC for interrupt routing [ 0.711205] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.711330] ACPI: No dock devices found. [ 0.711331] HEST: Table not found. [ 0.711334] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.711574] \_SB_.PCI0:_OSC invalid UUID [ 0.711575] _OSC request data:1 8 1f [ 0.711578] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.711986] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.711988] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.711990] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.711992] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff] [ 0.711994] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.712003] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.712033] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 0.712054] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.712056] pci 0000:00:01.0: PME# disabled [ 0.712072] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 [ 0.712081] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit] [ 0.712086] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.712090] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 0.712136] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.712158] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit] [ 0.712218] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.712222] pci 0000:00:16.0: PME# disabled [ 0.712252] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.712272] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff] [ 0.712342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.712346] pci 0000:00:1a.0: PME# disabled [ 0.712369] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.712384] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit] [ 0.712436] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.712440] pci 0000:00:1b.0: PME# disabled [ 0.712460] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.712519] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.712523] pci 0000:00:1c.0: PME# disabled [ 0.712545] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.712605] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.712609] pci 0000:00:1c.1: PME# disabled [ 0.712632] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.712691] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.712695] pci 0000:00:1c.3: PME# disabled [ 0.712719] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.712778] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.712782] pci 0000:00:1c.4: PME# disabled [ 0.712805] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 0.712864] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.712868] pci 0000:00:1c.5: PME# disabled [ 0.712896] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.712916] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff] [ 0.712986] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.712990] pci 0000:00:1d.0: PME# disabled [ 0.713013] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601 [ 0.713124] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.713141] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] [ 0.713149] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] [ 0.713157] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] [ 0.713165] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] [ 0.713172] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 0.713180] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff] [ 0.713212] pci 0000:00:1f.2: PME# supported from D3hot [ 0.713215] pci 0000:00:1f.2: PME# disabled [ 0.713232] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.713247] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit] [ 0.713267] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.713317] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300 [ 0.713324] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] [ 0.713332] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.713340] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.713346] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.713351] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.717939] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.717946] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.717953] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.717963] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.718035] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.718245] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280 [ 0.718393] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit] [ 0.718953] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.718988] pci 0000:03:00.0: PME# disabled [ 0.724728] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.724734] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.724807] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03 [ 0.724833] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit] [ 0.724937] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.724942] pci 0000:04:00.0: PME# disabled [ 0.731273] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.731287] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.731365] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.731371] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.731440] pci 0000:06:00.0: [1969:1083] type 0 class 0x000200 [ 0.731468] pci 0000:06:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit] [ 0.731482] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f] [ 0.731577] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.731583] pci 0000:06:00.0: PME# disabled [ 0.737937] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.737947] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.737956] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.738015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.738081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.738103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.738126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.738149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.738180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.738206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.738254] \_SB_.PCI0:_OSC invalid UUID [ 0.738255] _OSC request data:1 1f 1f [ 0.738258] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.738280] \_SB_.PCI0:_OSC invalid UUID [ 0.738281] _OSC request data:1 0 1d [ 0.738284] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.738285] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.740382] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.740418] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.740453] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.740486] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.740520] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.740554] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.740588] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.740622] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.740694] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.740700] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.740702] vgaarb: loaded [ 0.740703] vgaarb: bridge control possible 0000:01:00.0 [ 0.740704] vgaarb: no bridge control possible 0000:00:02.0 [ 0.740748] PCI: Using ACPI for IRQ routing [ 0.742186] PCI: pci_cache_line_size set to 64 bytes [ 0.742309] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.742311] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff [ 0.742314] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff [ 0.742315] reserve RAM buffer: 000000023fe00000 - 000000023fffffff [ 0.742385] NetLabel: Initializing [ 0.742386] NetLabel: domain hash size = 128 [ 0.742387] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.742397] NetLabel: unlabeled traffic allowed by default [ 0.742410] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.742415] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.744426] Switching to clocksource hpet [ 0.748285] pnp: PnP ACPI init [ 0.748298] ACPI: bus type pnp registered [ 0.748533] pnp 00:00: [bus 00-3e] [ 0.748535] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.748537] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.748538] pnp 00:00: [io 0x0d00-0xffff window] [ 0.748540] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.748541] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.748543] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.748544] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.748545] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.748547] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.748548] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.748550] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.748551] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.748553] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.748554] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.748555] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.748557] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.748558] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.748560] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] [ 0.748561] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.748614] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.748624] pnp 00:01: [io 0x0000-0x001f] [ 0.748625] pnp 00:01: [io 0x0081-0x0091] [ 0.748627] pnp 00:01: [io 0x0093-0x009f] [ 0.748628] pnp 00:01: [io 0x00c0-0x00df] [ 0.748629] pnp 00:01: [dma 4] [ 0.748647] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.748703] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.748720] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.748727] pnp 00:03: [io 0x00f0] [ 0.748737] pnp 00:03: [irq 13] [ 0.748755] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.748762] pnp 00:04: [io 0x002e-0x002f] [ 0.748764] pnp 00:04: [io 0x004e-0x004f] [ 0.748765] pnp 00:04: [io 0x0061] [ 0.748766] pnp 00:04: [io 0x0063] [ 0.748767] pnp 00:04: [io 0x0065] [ 0.748768] pnp 00:04: [io 0x0067] [ 0.748769] pnp 00:04: [io 0x0068] [ 0.748770] pnp 00:04: [io 0x006c] [ 0.748771] pnp 00:04: [io 0x0070] [ 0.748773] pnp 00:04: [io 0x0080] [ 0.748774] pnp 00:04: [io 0x0092] [ 0.748775] pnp 00:04: [io 0x00b2-0x00b3] [ 0.748776] pnp 00:04: [io 0x0680-0x069f] [ 0.748778] pnp 00:04: [io 0x1000-0x1003] [ 0.748780] pnp 00:04: [io 0x1004-0x1013] [ 0.748781] pnp 00:04: [io 0xffff] [ 0.748782] pnp 00:04: [io 0x0400-0x0453] [ 0.748783] pnp 00:04: [io 0x0458-0x047f] [ 0.748784] pnp 00:04: [io 0x0500-0x057f] [ 0.748785] pnp 00:04: [io 0x164e-0x164f] [ 0.748822] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.748824] system 00:04: [io 0x1000-0x1003] has been reserved [ 0.748826] system 00:04: [io 0x1004-0x1013] has been reserved [ 0.748828] system 00:04: [io 0xffff] has been reserved [ 0.748829] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.748831] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.748832] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.748834] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.748836] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.748842] pnp 00:05: [io 0x0070-0x0077] [ 0.748848] pnp 00:05: [irq 8] [ 0.748864] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.748884] pnp 00:06: [io 0x0454-0x0457] [ 0.748910] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.748912] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.748939] pnp 00:07: [io 0x0060] [ 0.748940] pnp 00:07: [io 0x0064] [ 0.748946] pnp 00:07: [irq 1] [ 0.748967] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.748994] pnp 00:08: [irq 12] [ 0.749013] pnp 00:08: Plug and Play ACPI device, IDs DLL0446 PNP0f13 (active) [ 0.749085] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.749087] pnp 00:09: [mem 0xfed10000-0xfed17fff] [ 0.749088] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.749090] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.749091] pnp 00:09: [mem 0xf8000000-0xfbffffff] [ 0.749092] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.749093] pnp 00:09: [mem 0xfed90000-0xfed93fff] [ 0.749095] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.749096] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.749097] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.749099] pnp 00:09: [mem 0xfffff000-0xffffffff] [ 0.749110] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.749133] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.749134] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.749136] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.749138] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.749140] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.749142] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.749143] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.749145] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.749147] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.749149] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.749151] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.749235] pnp 00:0a: [irq 20] [ 0.749264] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) [ 0.749354] pnp: PnP ACPI: found 11 devices [ 0.749355] ACPI: ACPI bus type pnp unregistered [ 0.755756] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.755761] PCI: max bus depth: 1 pci_try_num: 2 [ 0.755804] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.755806] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.755808] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.755810] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.755813] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.755816] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.755827] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.755832] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.755840] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.755845] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.755853] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.755858] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.755866] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.755869] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.755874] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.755890] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.755893] pci 0000:00:01.0: setting latency timer to 64 [ 0.755899] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.755904] pci 0000:00:1c.0: setting latency timer to 64 [ 0.755914] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.755918] pci 0000:00:1c.1: setting latency timer to 64 [ 0.755927] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.755931] pci 0000:00:1c.3: setting latency timer to 64 [ 0.755938] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.755941] pci 0000:00:1c.4: setting latency timer to 64 [ 0.755948] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.755952] pci 0000:00:1c.5: setting latency timer to 64 [ 0.755955] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.755956] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.755958] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.755959] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.755961] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.755962] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.755964] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] [ 0.755965] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.755967] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff] [ 0.755969] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff] [ 0.755970] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff] [ 0.755972] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.755973] pci_bus 0000:06: resource 1 [mem 0xf1800000-0xf18fffff] [ 0.755994] NET: Registered protocol family 2 [ 0.756175] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.757698] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.758824] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.758948] TCP: Hash tables configured (established 524288 bind 65536) [ 0.758949] TCP reno registered [ 0.758962] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.758991] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.759070] NET: Registered protocol family 1 [ 0.759082] pci 0000:00:02.0: Boot video device [ 0.759223] PCI: CLS 64 bytes, default 64 [ 0.759259] Unpacking initramfs... [ 1.081240] Freeing initrd memory: 3588k freed [ 1.081677] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.081681] Placing 64MB software IO TLB between ffff8800b6c85000 - ffff8800bac85000 [ 1.081683] software IO TLB at phys 0xb6c85000 - 0xbac85000 [ 1.082036] audit: initializing netlink socket (disabled) [ 1.082044] type=2000 audit(1326966022.876:1): initialized [ 1.090908] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.109291] VFS: Disk quotas dquot_6.5.2 [ 1.109331] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.109396] msgmni has been set to 15803 [ 1.109521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.109541] io scheduler noop registered [ 1.109543] io scheduler deadline registered [ 1.109566] io scheduler cfq registered (default) [ 1.109637] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.109662] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 1.109944] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 1.109945] vesafb: scrolling: redraw [ 1.109947] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.111059] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005800000, using 5120k, total 5120k [ 1.192175] Console: switching to colour frame buffer device 160x64 [ 1.272935] fb0: VESA VGA frame buffer device [ 1.272944] intel_idle: MWAIT substates: 0x21120 [ 1.272945] intel_idle: v0.4 model 0x2A [ 1.272946] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.272983] ERST: Table is not found! [ 1.272984] GHES: HEST is not enabled! [ 1.273031] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.461155] Linux agpgart interface v0.103 [ 1.461214] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.465620] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.465641] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.465721] mousedev: PS/2 mouse device common for all mice [ 1.465815] rtc_cmos 00:05: RTC can wake from S4 [ 1.465916] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.465941] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.466036] cpuidle: using governor ladder [ 1.466186] cpuidle: using governor menu [ 1.466317] TCP cubic registered [ 1.466319] NET: Registered protocol family 17 [ 1.466325] Registering the dns_resolver key type [ 1.466444] PM: Checking hibernation image partition /dev/nakor/swap [ 1.471378] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.477139] PM: Hibernation image not present or could not be loaded. [ 1.477148] registered taskstats version 1 [ 1.486190] rtc_cmos 00:05: setting system clock to 2012-01-19 09:40:23 UTC (1326966023) [ 1.486255] Initializing network drop monitor service [ 1.487217] Freeing unused kernel memory: 728k freed [ 1.487292] Write protecting the kernel read-only data: 8192k [ 1.491595] Freeing unused kernel memory: 1848k freed [ 1.493466] Freeing unused kernel memory: 696k freed [ 1.499947] udevd[46]: starting version 175 [ 1.540536] usbcore: registered new interface driver usbfs [ 1.540565] usbcore: registered new interface driver hub [ 1.543736] usbcore: registered new device driver usb [ 1.545190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.545212] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.545241] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.545245] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.545263] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.545292] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.549179] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.549193] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000 [ 1.554896] SCSI subsystem initialized [ 1.555867] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.555898] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 1.555902] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.555911] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 1.556079] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000 [ 1.556143] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 1.556148] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.556153] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 1.556157] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 1.556162] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 1.556337] xHCI xhci_add_endpoint called for root hub [ 1.556340] xHCI xhci_check_bandwidth called for root hub [ 1.556373] hub 2-0:1.0: USB hub found [ 1.556381] hub 2-0:1.0: 2 ports detected [ 1.556436] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.556441] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 1.558142] libata version 3.00 loaded. [ 1.559555] xHCI xhci_add_endpoint called for root hub [ 1.559557] xHCI xhci_check_bandwidth called for root hub [ 1.559577] hub 3-0:1.0: USB hub found [ 1.559584] hub 3-0:1.0: 2 ports detected [ 1.560915] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.561095] hub 1-0:1.0: USB hub found [ 1.561099] hub 1-0:1.0: 2 ports detected [ 1.561163] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.561214] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.561218] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.561224] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.561246] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.565135] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.565146] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000 [ 1.577654] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.577868] hub 4-0:1.0: USB hub found [ 1.577872] hub 4-0:1.0: 2 ports detected [ 1.577938] ahci 0000:00:1f.2: version 3.0 [ 1.577952] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.578020] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X [ 1.578051] ahci: SSS flag set, parallel bus scan disabled [ 1.590999] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 1.591003] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.591009] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.604815] scsi0 : ahci [ 1.604914] scsi1 : ahci [ 1.604979] scsi2 : ahci [ 1.605047] scsi3 : ahci [ 1.605114] scsi4 : ahci [ 1.605175] scsi5 : ahci [ 1.605247] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08100 irq 48 [ 1.605250] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08180 irq 48 [ 1.605252] ata3: DUMMY [ 1.605253] ata4: DUMMY [ 1.605255] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08300 irq 48 [ 1.605257] ata6: DUMMY [ 1.860902] usb 2-1: new low-speed USB device number 2 using xhci_hcd [ 1.894576] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 1.902577] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 1.907556] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 1.908851] usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.924234] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.926212] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.927019] ata1.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133 [ 1.927029] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.936174] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.937027] ata1.00: configured for UDMA/133 [ 1.937247] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.06 PQ: 0 ANSI: 5 [ 2.014186] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.084149] Refined TSC clocksource calibration: 2693.880 MHz. [ 2.084154] Switching to clocksource tsc [ 2.138315] hub 1-1:1.0: USB hub found [ 2.138455] hub 1-1:1.0: 6 ports detected [ 2.244111] usb 4-1: new high-speed USB device number 2 using ehci_hcd [ 2.257435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.261953] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133 [ 2.267055] ata2.00: configured for UDMA/133 [ 2.277299] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N A101 PQ: 0 ANSI: 5 [ 2.368192] hub 4-1:1.0: USB hub found [ 2.368381] hub 4-1:1.0: 8 ports detected [ 2.447538] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.597323] ata5: SATA link down (SStatus 0 SControl 300) [ 2.601795] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 2.601869] sd 0:0:0:0: [sda] Write Protect is off [ 2.601871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.601890] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.602237] sda: sda1 sda2 sda3 sda4 [ 2.602498] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.608644] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 2.608648] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.608846] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.609389] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-1/2-1:1.0/input/input1 [ 2.609481] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:04:00.0-1/input0 [ 2.609505] usbcore: registered new interface driver usbhid [ 2.609507] usbhid: USB HID core driver [ 2.670868] usb 4-1.5: new full-speed USB device number 3 using ehci_hcd [ 2.776925] device-mapper: uevent: version 1.0.3 [ 2.777071] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 9.475885] PM: Starting manual resume from disk [ 9.475887] PM: Hibernation image partition 254:2 present [ 9.475888] PM: Looking for hibernation image. [ 9.476129] PM: Image not found (code -22) [ 9.476130] PM: Hibernation image not present or could not be loaded. [ 9.491334] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 9.777314] udevd[312]: starting version 175 [ 9.822873] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 9.822879] ACPI: Power Button [PWRB] [ 9.822931] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 9.822935] ACPI: Sleep Button [SLPB] [ 9.822985] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 9.823601] ACPI: Lid Switch [LID0] [ 9.823662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 9.823667] ACPI: Power Button [PWRF] [ 9.824540] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 9.824735] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 9.824773] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 9.826177] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 9.828350] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 9.829183] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.829191] mei 0000:00:16.0: setting latency timer to 64 [ 9.829273] mei 0000:00:16.0: irq 49 for MSI/MSI-X [ 9.836236] thermal LNXTHERM:00: registered as thermal_zone0 [ 9.836240] ACPI: Thermal Zone [TZ00] (66 C) [ 9.836447] thermal LNXTHERM:01: registered as thermal_zone1 [ 9.836450] ACPI: Thermal Zone [TZ01] (66 C) [ 9.840433] iTCO_vendor_support: vendor-support=0 [ 9.840557] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.843528] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.843539] atl1c 0000:06:00.0: setting latency timer to 64 [ 9.851590] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 9.872598] Bluetooth: Core ver 2.16 [ 9.872614] NET: Registered protocol family 31 [ 9.872616] Bluetooth: HCI device and connection manager initialized [ 9.872619] Bluetooth: HCI socket layer initialized [ 9.872621] Bluetooth: L2CAP socket layer initialized [ 9.872625] Bluetooth: SCO socket layer initialized [ 9.873302] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 9.958618] atl1c 0000:06:00.0: version 1.0.1.0-NAPI [ 9.976841] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 9.977095] usbcore: registered new interface driver btusb [ 9.982828] [drm] Initialized drm 1.1.0 20060810 [ 10.028293] ACPI: AC Adapter [ADP0] (on-line) [ 10.041653] ACPI: Battery Slot [BAT0] (battery present) [ 10.043098] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 10.043196] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 10.043710] wmi: Mapper loaded [ 10.043942] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.047641] Linux media interface: v0.10 [ 10.050380] Linux video capture interface: v2.00 [ 10.052617] cfg80211: Calling CRDA to update world regulatory domain [ 10.052848] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0c45:642a) [ 10.056042] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.056047] i915 0000:00:02.0: setting latency timer to 64 [ 10.060454] input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7 [ 10.060527] usbcore: registered new interface driver uvcvideo [ 10.060529] USB Video Class driver (1.1.1) [ 10.062167] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 10.062169] Copyright(c) 2003-2011 Intel Corporation [ 10.062239] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.062267] iwlwifi 0000:03:00.0: setting latency timer to 64 [ 10.064876] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [ 10.064878] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90000c74000 [ 10.064879] iwlwifi 0000:03:00.0: HW Revision ID = 0x34 [ 10.065061] iwlwifi 0000:03:00.0: irq 50 for MSI/MSI-X [ 10.065158] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 10.065223] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 10.080618] iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6 [ 10.080620] iwlwifi 0000:03:00.0: Device SKU: 0X1f0 [ 10.080621] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 10.080633] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 10.120513] i915 0000:00:02.0: irq 51 for MSI/MSI-X [ 10.120517] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.120518] [drm] Driver supports precise vblank timestamp query. [ 10.120616] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 10.120675] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 10.120712] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 10.120714] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 10.150538] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 10.161299] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.2 build 35905 [ 10.161466] Registered led device: phy0-led [ 10.163314] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 10.327776] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input9 [ 10.778491] checking generic (e0000000 500000) vs hw (e0000000 10000000) [ 10.778494] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 10.778514] Console: switching to colour dummy device 80x25 [ 10.779311] fbcon: inteldrmfb (fb0) is primary device [ 10.944683] Console: switching to colour frame buffer device 240x67 [ 10.948270] fb0: inteldrmfb frame buffer device [ 10.948271] drm: registered panic notifier [ 10.948428] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 10.951534] acpi device:2e: registered as cooling_device4 [ 10.951636] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input10 [ 10.951692] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 10.988667] acpi device:32: registered as cooling_device5 [ 10.988812] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11 [ 10.988909] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.988968] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.989030] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.989085] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X [ 10.989108] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 14.023580] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 14.543728] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12 [ 14.549468] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 14.549609] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 14.549758] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 14.549808] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 14.695760] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 14.707970] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 14.736013] Adding 2097140k swap on /dev/mapper/nakor-swap. Priority:-1 extents:1 across:2097140k SS [ 15.111262] NET: Registered protocol family 10 [ 16.091305] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 16.098007] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 16.388422] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 16.394994] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 16.504756] EXT4-fs (dm-1): re-mounted. Opts: commit=0 [ 16.510594] EXT4-fs (sda3): re-mounted. Opts: commit=0 [ 16.512995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.532811] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 18.539385] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 18.669328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.598444] usb 2-2: new low-speed USB device number 3 using xhci_hcd [ 30.632675] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 30.643660] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 30.648665] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 30.649874] usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 30.664885] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-2/2-2:1.0/input/input16 [ 30.665142] generic-usb 0003:04B3:3025.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:04:00.0-2/input0 [ 175.051840] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 175.058415] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 175.189756] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 177.222350] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 177.228917] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 177.358841] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 182.637955] wlan0: authenticate with 38:e7:d8:e8:2c:f5 (try 1) [ 182.640803] wlan0: authenticated [ 182.641056] wlan0: waiting for beacon from 38:e7:d8:e8:2c:f5 [ 182.708009] wlan0: beacon received [ 182.746656] wlan0: associate with 38:e7:d8:e8:2c:f5 (try 1) [ 182.749421] wlan0: RX AssocResp from 38:e7:d8:e8:2c:f5 (capab=0x411 status=0 aid=1) [ 182.749424] wlan0: associated [ 182.758352] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 193.159963] wlan0: no IPv6 routers present [ 210.975473] fuse init (API version 7.17) [ 244.807187] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X [ 244.807253] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 255.486797] eth0: no IPv6 routers present
Should mark this as a regression.
Info from working kernel 3.1.9: $ uname -a Linux nakor 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 09:11:37 CET 2012 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux $ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.9-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Jan 14 09:11:37 CET 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/nakor-root ro cryptdevice=/dev/sda4:crypt resume=/dev/nakor/swap quiet [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bac8f000 (usable) [ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bad36000 (reserved) [ 0.000000] BIOS-e820: 00000000bad36000 - 00000000bad43000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bad43000 - 00000000badcf000 (reserved) [ 0.000000] BIOS-e820: 00000000badcf000 - 00000000badd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badd0000 - 00000000badfc000 (reserved) [ 0.000000] BIOS-e820: 00000000badfc000 - 00000000badfe000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badfe000 - 00000000bae01000 (reserved) [ 0.000000] BIOS-e820: 00000000bae01000 - 00000000bae04000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae04000 - 00000000bae06000 (reserved) [ 0.000000] BIOS-e820: 00000000bae06000 - 00000000bae07000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae07000 - 00000000bae0a000 (reserved) [ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf1a000 (reserved) [ 0.000000] BIOS-e820: 00000000baf1a000 - 00000000baf1c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) [ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Dell System XPS 15Z/060G42, BIOS A03 06/01/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000 [ 0.000000] 0000000000 - 00bb000000 page 2M [ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000 [ 0.000000] 0100000000 - 023fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 23fe00000 @ bac85000-bac8f000 [ 0.000000] RAMDISK: 37906000 - 37c7b000 [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP 00000000baff0000 000F4 (v03 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000baff3000 08A4A (v02 DELL SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf41000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000baff2000 000A5 (v32 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000bafef000 00038 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafee000 00098 (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafed000 0003C (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000bafec000 00B3B (v01 NvORef NvOptTbl 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe9000 0003E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: DMAR 00000000bafe7000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe6000 0022E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000 [ 0.000000] NODE_DATA [000000023fdfb000 - 000000023fdfffff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bac8f [ 0.000000] 0: 0x000bafff -> 0x000bb000 [ 0.000000] 0: 0x00100000 -> 0x0023fe00 [ 0.000000] On node 0 totalpages: 2075165 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 744656 pages, LIFO batch:31 [ 0.000000] Normal zone: 20472 pages used for memmap [ 0.000000] Normal zone: 1289736 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bac8f000 - 00000000bad36000 [ 0.000000] PM: Registered nosave memory: 00000000bad36000 - 00000000bad43000 [ 0.000000] PM: Registered nosave memory: 00000000bad43000 - 00000000badcf000 [ 0.000000] PM: Registered nosave memory: 00000000badcf000 - 00000000badd0000 [ 0.000000] PM: Registered nosave memory: 00000000badd0000 - 00000000badfc000 [ 0.000000] PM: Registered nosave memory: 00000000badfc000 - 00000000badfe000 [ 0.000000] PM: Registered nosave memory: 00000000badfe000 - 00000000bae01000 [ 0.000000] PM: Registered nosave memory: 00000000bae01000 - 00000000bae04000 [ 0.000000] PM: Registered nosave memory: 00000000bae04000 - 00000000bae06000 [ 0.000000] PM: Registered nosave memory: 00000000bae06000 - 00000000bae07000 [ 0.000000] PM: Registered nosave memory: 00000000bae07000 - 00000000bae0a000 [ 0.000000] PM: Registered nosave memory: 00000000bae0a000 - 00000000bae1b000 [ 0.000000] PM: Registered nosave memory: 00000000bae1b000 - 00000000baf1a000 [ 0.000000] PM: Registered nosave memory: 00000000baf1a000 - 00000000baf1c000 [ 0.000000] PM: Registered nosave memory: 00000000baf1c000 - 00000000baf1f000 [ 0.000000] PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000 [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000 [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s80448 r8192 d21952 u262144 [ 0.000000] pcpu-alloc: s80448 r8192 d21952 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038304 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/nakor-root ro cryptdevice=/dev/sda4:crypt resume=/dev/nakor/swap quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8087324k/9435136k available (4164k kernel code, 1134476k absent, 213336k reserved, 5281k data, 716k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.003333] Detected 2693.747 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.97 BogoMIPS (lpj=8979156) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000098] Security Framework initialized [ 0.000101] AppArmor: AppArmor disabled by boot time parameter [ 0.000698] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002249] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002884] Mount-cache hash table entries: 256 [ 0.003175] Initializing cgroup subsys cpuacct [ 0.003197] Initializing cgroup subsys memory [ 0.003209] Initializing cgroup subsys devices [ 0.003210] Initializing cgroup subsys freezer [ 0.003212] Initializing cgroup subsys net_cls [ 0.003213] Initializing cgroup subsys blkio [ 0.003251] Disabled fast string operations [ 0.003253] CPU: Physical Processor ID: 0 [ 0.003254] CPU: Processor Core ID: 0 [ 0.003258] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003259] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003261] mce: CPU supports 7 MCE banks [ 0.003269] CPU0: Thermal monitoring handled by SMI [ 0.003275] using mwait in idle threads. [ 0.004022] ACPI: Core revision 20110623 [ 0.058661] ftrace: allocating 16348 entries in 65 pages [ 0.063171] DMAR: Host address width 36 [ 0.063173] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.063178] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.063180] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.063184] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.063185] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff [ 0.063187] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.063188] DMAR: No ATSR found [ 0.063286] Not enabling x2apic, Intr-remapping init failed. [ 0.063636] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.096627] CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz stepping 07 [ 0.201436] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.201441] ... version: 3 [ 0.201442] ... bit width: 48 [ 0.201443] ... generic registers: 4 [ 0.201444] ... value mask: 0000ffffffffffff [ 0.201445] ... max period: 000000007fffffff [ 0.201446] ... fixed-purpose events: 3 [ 0.201447] ... event mask: 000000070000000f [ 0.221789] NMI watchdog enabled, takes one hw-pmu counter. [ 0.248112] Booting Node 0, Processors #1 [ 0.248118] smpboot cpu 1: start_ip = 98000 [ 0.341394] Disabled fast string operations [ 0.341408] CPU1: Thermal monitoring handled by SMI [ 0.361464] NMI watchdog enabled, takes one hw-pmu counter. [ 0.381423] #2 [ 0.381426] smpboot cpu 2: start_ip = 98000 [ 0.474677] Disabled fast string operations [ 0.474690] CPU2: Thermal monitoring handled by SMI [ 0.494783] NMI watchdog enabled, takes one hw-pmu counter. [ 0.514694] #3 [ 0.514698] smpboot cpu 3: start_ip = 98000 [ 0.607961] Disabled fast string operations [ 0.607973] CPU3: Thermal monitoring handled by SMI [ 0.628050] NMI watchdog enabled, takes one hw-pmu counter. [ 0.634621] Brought up 4 CPUs [ 0.634626] Total of 4 processors activated (21558.91 BogoMIPS). [ 0.637947] devtmpfs: initialized [ 0.638713] PM: Registering ACPI NVS region at bad36000 (53248 bytes) [ 0.638715] PM: Registering ACPI NVS region at badcf000 (4096 bytes) [ 0.638716] PM: Registering ACPI NVS region at badfc000 (8192 bytes) [ 0.638717] PM: Registering ACPI NVS region at bae01000 (12288 bytes) [ 0.638719] PM: Registering ACPI NVS region at bae06000 (4096 bytes) [ 0.638721] PM: Registering ACPI NVS region at bae0a000 (69632 bytes) [ 0.638723] PM: Registering ACPI NVS region at baf1a000 (8192 bytes) [ 0.638724] PM: Registering ACPI NVS region at baf1f000 (524288 bytes) [ 0.639385] print_constraints: dummy: [ 0.639444] NET: Registered protocol family 16 [ 0.639519] ACPI: bus type pci registered [ 0.639637] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.639640] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.653506] PCI: Using configuration type 1 for base access [ 0.653918] bio: create slab <bio-0> at 0 [ 0.654002] ACPI: Added _OSI(Module Device) [ 0.654003] ACPI: Added _OSI(Processor Device) [ 0.654005] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.654006] ACPI: Added _OSI(Processor Aggregator Device) [ 0.655219] ACPI: EC: Look up EC in DSDT [ 0.656356] ACPI: Executed 1 blocks of module-level executable AML code [ 0.674674] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.675488] ACPI: SSDT 00000000bae08718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.675791] ACPI: Dynamic OEM Table Load: [ 0.675793] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.684823] ACPI: SSDT 00000000baf0fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.685146] ACPI: Dynamic OEM Table Load: [ 0.685148] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.694721] ACPI: SSDT 00000000bae07d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.695019] ACPI: Dynamic OEM Table Load: [ 0.695020] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.707331] ACPI: Interpreter enabled [ 0.707334] ACPI: (supports S0 S3 S4 S5) [ 0.707350] ACPI: Using IOAPIC for interrupt routing [ 0.711861] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.711978] ACPI: No dock devices found. [ 0.711980] HEST: Table not found. [ 0.711982] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.712213] \_SB_.PCI0:_OSC invalid UUID [ 0.712215] _OSC request data:1 8 1f [ 0.712218] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.712608] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.712610] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.712612] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.712614] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff] [ 0.712616] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.712625] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.712655] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 0.712676] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.712679] pci 0000:00:01.0: PME# disabled [ 0.712694] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 [ 0.712703] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit] [ 0.712708] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.712712] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 0.712758] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.712780] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit] [ 0.712840] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.712844] pci 0000:00:16.0: PME# disabled [ 0.712874] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.712894] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff] [ 0.712964] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.712968] pci 0000:00:1a.0: PME# disabled [ 0.712991] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.713005] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit] [ 0.713058] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.713062] pci 0000:00:1b.0: PME# disabled [ 0.713082] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.713142] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.713145] pci 0000:00:1c.0: PME# disabled [ 0.713168] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.713227] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.713231] pci 0000:00:1c.1: PME# disabled [ 0.713254] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.713314] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.713318] pci 0000:00:1c.3: PME# disabled [ 0.713341] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.713401] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.713404] pci 0000:00:1c.4: PME# disabled [ 0.713427] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 0.713486] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.713490] pci 0000:00:1c.5: PME# disabled [ 0.713517] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.713537] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff] [ 0.713608] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.713612] pci 0000:00:1d.0: PME# disabled [ 0.713634] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601 [ 0.713745] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.713762] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] [ 0.713770] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] [ 0.713778] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] [ 0.713786] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] [ 0.713793] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 0.713801] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff] [ 0.713832] pci 0000:00:1f.2: PME# supported from D3hot [ 0.713836] pci 0000:00:1f.2: PME# disabled [ 0.713853] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.713867] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit] [ 0.713888] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.713937] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300 [ 0.713944] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] [ 0.713952] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.713960] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.713966] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.713972] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.717937] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.717944] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.717951] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.717960] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.718032] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.718227] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280 [ 0.718375] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit] [ 0.718930] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.718964] pci 0000:03:00.0: PME# disabled [ 0.724714] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.724720] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.724793] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03 [ 0.724819] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit] [ 0.724923] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.724928] pci 0000:04:00.0: PME# disabled [ 0.731271] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.731285] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.731362] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.731368] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.731438] pci 0000:06:00.0: [1969:1083] type 0 class 0x000200 [ 0.731465] pci 0000:06:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit] [ 0.731479] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f] [ 0.731574] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.731580] pci 0000:06:00.0: PME# disabled [ 0.737935] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.737945] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.737954] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.738013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.738079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.738101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.738122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.738145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.738176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.738202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.738248] \_SB_.PCI0:_OSC invalid UUID [ 0.738249] _OSC request data:1 1f 1f [ 0.738253] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.738274] \_SB_.PCI0:_OSC invalid UUID [ 0.738275] _OSC request data:1 0 1d [ 0.738278] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.738280] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.740265] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.740301] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.740335] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.740368] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.740401] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.740434] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.740467] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.740500] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.740564] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.740570] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.740573] vgaarb: loaded [ 0.740573] vgaarb: bridge control possible 0000:01:00.0 [ 0.740574] vgaarb: bridge control possible 0000:00:02.0 [ 0.740631] PCI: Using ACPI for IRQ routing [ 0.742069] PCI: pci_cache_line_size set to 64 bytes [ 0.742191] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.742192] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff [ 0.742196] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff [ 0.742197] reserve RAM buffer: 000000023fe00000 - 000000023fffffff [ 0.742273] NetLabel: Initializing [ 0.742274] NetLabel: domain hash size = 128 [ 0.742275] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.742285] NetLabel: unlabeled traffic allowed by default [ 0.742298] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.742302] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.744314] Switching to clocksource hpet [ 0.744576] Switched to NOHz mode on CPU #0 [ 0.744654] Switched to NOHz mode on CPU #1 [ 0.744674] Switched to NOHz mode on CPU #3 [ 0.744690] Switched to NOHz mode on CPU #2 [ 0.748137] pnp: PnP ACPI init [ 0.748148] ACPI: bus type pnp registered [ 0.748376] pnp 00:00: [bus 00-3e] [ 0.748378] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.748381] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.748382] pnp 00:00: [io 0x0d00-0xffff window] [ 0.748384] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.748385] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.748387] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.748388] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.748390] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.748391] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.748393] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.748394] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.748395] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.748397] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.748398] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.748400] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.748401] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.748402] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.748404] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] [ 0.748405] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.748459] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.748469] pnp 00:01: [io 0x0000-0x001f] [ 0.748470] pnp 00:01: [io 0x0081-0x0091] [ 0.748471] pnp 00:01: [io 0x0093-0x009f] [ 0.748472] pnp 00:01: [io 0x00c0-0x00df] [ 0.748474] pnp 00:01: [dma 4] [ 0.748489] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.748544] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.748559] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.748566] pnp 00:03: [io 0x00f0] [ 0.748574] pnp 00:03: [irq 13] [ 0.748590] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.748597] pnp 00:04: [io 0x002e-0x002f] [ 0.748599] pnp 00:04: [io 0x004e-0x004f] [ 0.748600] pnp 00:04: [io 0x0061] [ 0.748601] pnp 00:04: [io 0x0063] [ 0.748602] pnp 00:04: [io 0x0065] [ 0.748603] pnp 00:04: [io 0x0067] [ 0.748604] pnp 00:04: [io 0x0068] [ 0.748605] pnp 00:04: [io 0x006c] [ 0.748606] pnp 00:04: [io 0x0070] [ 0.748607] pnp 00:04: [io 0x0080] [ 0.748608] pnp 00:04: [io 0x0092] [ 0.748609] pnp 00:04: [io 0x00b2-0x00b3] [ 0.748610] pnp 00:04: [io 0x0680-0x069f] [ 0.748612] pnp 00:04: [io 0x1000-0x1003] [ 0.748613] pnp 00:04: [io 0x1004-0x1013] [ 0.748614] pnp 00:04: [io 0xffff] [ 0.748616] pnp 00:04: [io 0x0400-0x0453] [ 0.748617] pnp 00:04: [io 0x0458-0x047f] [ 0.748619] pnp 00:04: [io 0x0500-0x057f] [ 0.748620] pnp 00:04: [io 0x164e-0x164f] [ 0.748654] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.748656] system 00:04: [io 0x1000-0x1003] has been reserved [ 0.748657] system 00:04: [io 0x1004-0x1013] has been reserved [ 0.748659] system 00:04: [io 0xffff] has been reserved [ 0.748660] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.748662] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.748664] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.748665] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.748667] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.748673] pnp 00:05: [io 0x0070-0x0077] [ 0.748678] pnp 00:05: [irq 8] [ 0.748693] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.748711] pnp 00:06: [io 0x0454-0x0457] [ 0.748737] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.748739] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.748765] pnp 00:07: [io 0x0060] [ 0.748767] pnp 00:07: [io 0x0064] [ 0.748771] pnp 00:07: [irq 1] [ 0.748787] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.748811] pnp 00:08: [irq 12] [ 0.748828] pnp 00:08: Plug and Play ACPI device, IDs DLL0446 PNP0f13 (active) [ 0.748897] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.748898] pnp 00:09: [mem 0xfed10000-0xfed17fff] [ 0.748900] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.748901] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.748902] pnp 00:09: [mem 0xf8000000-0xfbffffff] [ 0.748903] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.748905] pnp 00:09: [mem 0xfed90000-0xfed93fff] [ 0.748906] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.748907] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.748908] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.748910] pnp 00:09: [mem 0xfffff000-0xffffffff] [ 0.748921] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.748941] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.748943] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.748945] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.748947] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.748948] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.748950] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.748952] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.748953] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.748955] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.748957] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.748959] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.749038] pnp 00:0a: [irq 20] [ 0.749064] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) [ 0.749154] pnp: PnP ACPI: found 11 devices [ 0.749155] ACPI: ACPI bus type pnp unregistered [ 0.755397] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.755401] PCI: max bus depth: 1 pci_try_num: 2 [ 0.755445] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.755447] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.755449] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.755452] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.755454] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.755457] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.755468] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.755473] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.755481] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.755486] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.755494] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.755499] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.755507] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.755510] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.755515] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff] [ 0.755528] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.755531] pci 0000:00:01.0: setting latency timer to 64 [ 0.755537] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.755542] pci 0000:00:1c.0: setting latency timer to 64 [ 0.755550] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.755554] pci 0000:00:1c.1: setting latency timer to 64 [ 0.755561] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.755565] pci 0000:00:1c.3: setting latency timer to 64 [ 0.755571] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.755575] pci 0000:00:1c.4: setting latency timer to 64 [ 0.755581] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.755585] pci 0000:00:1c.5: setting latency timer to 64 [ 0.755589] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.755590] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.755592] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.755593] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.755595] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.755597] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.755598] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] [ 0.755600] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.755601] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff] [ 0.755603] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff] [ 0.755605] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff] [ 0.755606] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.755608] pci_bus 0000:06: resource 1 [mem 0xf1800000-0xf18fffff] [ 0.755652] NET: Registered protocol family 2 [ 0.755864] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.757421] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.758530] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.758650] TCP: Hash tables configured (established 524288 bind 65536) [ 0.758652] TCP reno registered [ 0.758664] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.758693] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.758828] NET: Registered protocol family 1 [ 0.758841] pci 0000:00:02.0: Boot video device [ 0.758980] PCI: CLS 64 bytes, default 64 [ 0.759016] Unpacking initramfs... [ 1.070443] Freeing initrd memory: 3540k freed [ 1.070874] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.070878] Placing 64MB software IO TLB between ffff8800b6c85000 - ffff8800bac85000 [ 1.070879] software IO TLB at phys 0xb6c85000 - 0xbac85000 [ 1.071228] audit: initializing netlink socket (disabled) [ 1.071235] type=2000 audit(1326968094.869:1): initialized [ 1.080116] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.098403] VFS: Disk quotas dquot_6.5.2 [ 1.098497] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.098618] msgmni has been set to 15802 [ 1.098775] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.098803] io scheduler noop registered [ 1.098804] io scheduler deadline registered [ 1.098837] io scheduler cfq registered (default) [ 1.098905] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.098924] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.099193] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 1.099195] vesafb: scrolling: redraw [ 1.099196] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.100339] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005800000, using 5120k, total 5120k [ 1.181147] Console: switching to colour frame buffer device 160x64 [ 1.262144] fb0: VESA VGA frame buffer device [ 1.262153] intel_idle: MWAIT substates: 0x21120 [ 1.262154] intel_idle: v0.4 model 0x2A [ 1.262155] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.262194] ERST: Table is not found! [ 1.262195] GHES: HEST is not enabled! [ 1.262239] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.451036] Linux agpgart interface v0.103 [ 1.451090] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.455561] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.455581] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.455648] mousedev: PS/2 mouse device common for all mice [ 1.455795] rtc_cmos 00:05: RTC can wake from S4 [ 1.455895] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.455922] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.456005] cpuidle: using governor ladder [ 1.456140] cpuidle: using governor menu [ 1.456285] TCP cubic registered [ 1.456287] NET: Registered protocol family 17 [ 1.456293] Registering the dns_resolver key type [ 1.456389] PM: Checking hibernation image partition /dev/nakor/swap [ 1.460245] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.863302] PM: Hibernation image not present or could not be loaded. [ 1.863312] registered taskstats version 1 [ 1.872322] rtc_cmos 00:05: setting system clock to 2012-01-19 10:14:56 UTC (1326968096) [ 1.872379] Initializing network drop monitor service [ 1.873326] Freeing unused kernel memory: 716k freed [ 1.873400] Write protecting the kernel read-only data: 8192k [ 1.878071] Freeing unused kernel memory: 1960k freed [ 1.879971] Freeing unused kernel memory: 704k freed [ 1.886293] udevd[46]: starting version 175 [ 1.932164] SCSI subsystem initialized [ 1.932615] usbcore: registered new interface driver usbfs [ 1.932637] usbcore: registered new interface driver hub [ 1.935949] usbcore: registered new device driver usb [ 1.937680] libata version 3.00 loaded. [ 1.937882] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.937909] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.938026] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.938031] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.938072] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.938106] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.942009] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.942025] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000 [ 1.954084] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.954230] hub 1-0:1.0: USB hub found [ 1.954233] hub 1-0:1.0: 2 ports detected [ 1.954299] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.954334] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.954337] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.954344] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.954368] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.958267] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.958282] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000 [ 1.970758] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.970902] hub 2-0:1.0: USB hub found [ 1.970905] hub 2-0:1.0: 2 ports detected [ 1.970967] ahci 0000:00:1f.2: version 3.0 [ 1.970981] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.971035] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.971067] ahci: SSS flag set, parallel bus scan disabled [ 1.984089] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 1.984093] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.984098] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.997775] scsi0 : ahci [ 1.997860] scsi1 : ahci [ 1.997922] scsi2 : ahci [ 1.997981] scsi3 : ahci [ 1.998037] scsi4 : ahci [ 1.998093] scsi5 : ahci [ 1.998158] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08100 irq 41 [ 1.998162] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08180 irq 41 [ 1.998163] ata3: DUMMY [ 1.998164] ata4: DUMMY [ 1.998166] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08300 irq 41 [ 1.998168] ata6: DUMMY [ 2.030780] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.030814] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 2.030818] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.030828] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 2.030998] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000 [ 2.031058] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X [ 2.031061] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 2.031063] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 2.031065] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 2.031067] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 2.031242] xHCI xhci_add_endpoint called for root hub [ 2.031243] xHCI xhci_check_bandwidth called for root hub [ 2.031265] hub 3-0:1.0: USB hub found [ 2.031271] hub 3-0:1.0: 2 ports detected [ 2.031318] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.031322] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 2.034467] xHCI xhci_add_endpoint called for root hub [ 2.034468] xHCI xhci_check_bandwidth called for root hub [ 2.034485] hub 4-0:1.0: USB hub found [ 2.034491] hub 4-0:1.0: 2 ports detected [ 2.070694] Refined TSC clocksource calibration: 2693.881 MHz. [ 2.070712] Switching to clocksource tsc [ 2.260652] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 2.317303] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.350759] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.351608] ata1.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133 [ 2.351617] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.360712] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.361570] ata1.00: configured for UDMA/133 [ 2.361770] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.06 PQ: 0 ANSI: 5 [ 2.384715] hub 1-1:1.0: USB hub found [ 2.384804] hub 1-1:1.0: 6 ports detected [ 2.490581] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 2.614640] hub 2-1:1.0: USB hub found [ 2.614729] hub 2-1:1.0: 8 ports detected [ 2.680521] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.685038] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133 [ 2.690158] ata2.00: configured for UDMA/133 [ 2.695639] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N A101 PQ: 0 ANSI: 5 [ 2.720451] usb 3-1: new low speed USB device number 2 using xhci_hcd [ 2.754367] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 2.762374] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 2.767352] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 2.768611] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.837379] usb 1-1.4: new high speed USB device number 3 using ehci_hcd [ 3.013738] ata5: SATA link down (SStatus 0 SControl 300) [ 3.018844] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 3.018892] sd 0:0:0:0: [sda] Write Protect is off [ 3.018895] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.018906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.019206] sda: sda1 sda2 sda3 sda4 [ 3.019521] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.025904] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 3.025908] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.026118] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.032341] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input1 [ 3.032439] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:04:00.0-1/input0 [ 3.032461] usbcore: registered new interface driver usbhid [ 3.032463] usbhid: USB HID core driver [ 3.047165] usb 2-1.5: new full speed USB device number 3 using ehci_hcd [ 3.146669] device-mapper: uevent: version 1.0.3 [ 3.146779] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 8.366656] padlock_aes: VIA PadLock not detected. [ 8.569353] PM: Starting manual resume from disk [ 8.569356] PM: Hibernation image partition 254:2 present [ 8.569357] PM: Looking for hibernation image. [ 8.569583] PM: Image not found (code -22) [ 8.569585] PM: Hibernation image not present or could not be loaded. [ 8.584999] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 8.760253] udevd[312]: starting version 175 [ 8.803415] ACPI: acpi_idle yielding to intel_idle [ 8.804434] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 8.804636] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 8.806097] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 8.806311] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 8.808979] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 8.810689] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.810697] mei 0000:00:16.0: setting latency timer to 64 [ 8.815219] thermal LNXTHERM:00: registered as thermal_zone0 [ 8.815222] ACPI: Thermal Zone [TZ00] (67 C) [ 8.817639] thermal LNXTHERM:01: registered as thermal_zone1 [ 8.817642] ACPI: Thermal Zone [TZ01] (67 C) [ 8.829347] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.829358] atl1c 0000:06:00.0: setting latency timer to 64 [ 8.837598] iTCO_vendor_support: vendor-support=0 [ 8.838270] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.841902] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 8.855533] Bluetooth: Core ver 2.16 [ 8.855550] NET: Registered protocol family 31 [ 8.855552] Bluetooth: HCI device and connection manager initialized [ 8.855555] Bluetooth: HCI socket layer initialized [ 8.855557] Bluetooth: L2CAP socket layer initialized [ 8.855563] Bluetooth: SCO socket layer initialized [ 8.864996] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.879706] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 8.945581] atl1c 0000:06:00.0: version 1.0.1.0-NAPI [ 9.001908] ACPI: AC Adapter [ADP0] (on-line) [ 9.001980] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 9.002043] ACPI: Power Button [PWRB] [ 9.002089] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 9.002132] ACPI: Sleep Button [SLPB] [ 9.002181] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 9.003613] ACPI: Lid Switch [LID0] [ 9.003671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.003716] ACPI: Power Button [PWRF] [ 9.016215] ACPI: Battery Slot [BAT0] (battery present) [ 9.016687] usbcore: registered new interface driver btusb [ 9.017880] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 9.017964] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 9.018027] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.018319] Linux media interface: v0.10 [ 9.018882] wmi: Mapper loaded [ 9.024498] Linux video capture interface: v2.00 [ 9.024507] cfg80211: Calling CRDA to update world regulatory domain [ 9.027219] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0c45:642a) [ 9.030979] [drm] Initialized drm 1.1.0 20060810 [ 9.035154] input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7 [ 9.035220] usbcore: registered new interface driver uvcvideo [ 9.035222] USB Video Class driver (1.1.1) [ 9.040900] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 9.040905] Copyright(c) 2003-2011 Intel Corporation [ 9.041015] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.041053] iwlagn 0000:03:00.0: setting latency timer to 64 [ 9.041118] iwlagn 0000:03:00.0: pci_resource_len = 0x00002000 [ 9.041120] iwlagn 0000:03:00.0: pci_resource_base = ffffc90000c7c000 [ 9.041122] iwlagn 0000:03:00.0: HW Revision ID = 0x34 [ 9.041176] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.041349] iwlagn 0000:03:00.0: irq 47 for MSI/MSI-X [ 9.041449] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 9.041636] iwlagn 0000:03:00.0: L1 Enabled; Disabling L0S [ 9.041646] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 9.041692] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 9.057072] iwlagn 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6 [ 9.057074] iwlagn 0000:03:00.0: Device SKU: 0X1f0 [ 9.057076] iwlagn 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 9.057089] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 9.125332] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 9.132483] iwlagn 0000:03:00.0: loaded firmware version 17.168.5.2 build 35905 [ 9.132648] Registered led device: phy0-led [ 9.134370] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 9.303860] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input9 [ 9.583672] hda_codec: ALC269VB: BIOS auto-probing. [ 9.585086] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 9.587770] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 9.591134] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.591185] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 9.591231] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.591371] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.591375] i915 0000:00:02.0: setting latency timer to 64 [ 9.655210] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 9.655214] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.655216] [drm] Driver supports precise vblank timestamp query. [ 9.655315] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 9.655374] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 9.655408] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 9.655410] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 10.311955] checking generic (e0000000 500000) vs hw (e0000000 10000000) [ 10.311958] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 10.311978] Console: switching to colour dummy device 80x25 [ 10.312716] fbcon: inteldrmfb (fb0) is primary device [ 10.484717] Console: switching to colour frame buffer device 240x67 [ 10.488307] fb0: inteldrmfb frame buffer device [ 10.488308] drm: registered panic notifier [ 10.488466] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 10.492176] acpi device:2e: registered as cooling_device4 [ 10.492268] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input14 [ 10.492368] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 10.512055] acpi device:32: registered as cooling_device5 [ 10.512206] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15 [ 10.512273] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.512355] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.654977] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 10.667037] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 10.694561] Adding 2097140k swap on /dev/mapper/nakor-swap. Priority:-1 extents:1 across:2097140k [ 11.075769] NET: Registered protocol family 10 [ 12.053394] iwlagn 0000:03:00.0: L1 Enabled; Disabling L0S [ 12.060024] iwlagn 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 12.353346] iwlagn 0000:03:00.0: L1 Enabled; Disabling L0S [ 12.359976] iwlagn 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 12.402426] EXT4-fs (dm-1): re-mounted. Opts: commit=0 [ 12.409458] EXT4-fs (sda3): re-mounted. Opts: commit=0 [ 12.481285] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.503978] iwlagn 0000:03:00.0: L1 Enabled; Disabling L0S [ 14.510559] iwlagn 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 14.641546] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 42.353638] fuse init (API version 7.17) [ 69.246037] atl1c 0000:06:00.0: irq 50 for MSI/MSI-X [ 69.246118] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 79.845882] eth0: no IPv6 routers present
Ok, I diffed the dmesg output and saw x2apic got enabled in the newer kernel. Booting with "nox2apic" makes the keyboard and trackpad (and NIC) work again.
SAme issue described here http://www.spinics.net/lists/linux-acpi/msg34131.html Still present in 3.6rc5, after much time spent on this issue, I came to the conclusion it is a BIOS bug :-|
Kevin et all: I took a look again at this issue, can you try to reproduce this? Upgrade your BIOS from the dell website to version A11, then try booting with "nomodeset" Here, either booting with nox2apic OR nomodeset makes all stuff work, except that the display resolution goes down the drain.
Thanks Cristian. Yes, I can confirm that with nomodeset the keyboard works and x2apic is enabled. Of course, X does not work anymore with this command line. BIOS version is A11.
A significantly less invasive workaround: boot with "acpi_backlight=vendor" (only) works for me.
Workaround : diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index b728880..b0f2b0f 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -156,6 +156,14 @@ static struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "X360"), }, }, + { + .callback = video_detect_force_vendor, + .ident = "XPS15z", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell System XPS 15Z"), + }, + }, { }, };
This workaround works for me too - nice work!
Looks forgotten. Feel free to reopen if still of interest.
Unfortunately this device broke circa 2016 and cannot test it anymore. so, yeah it is obsolete.