Bug 5381

Summary:	nokia phone usb connection bug
Product:	Drivers	Reporter:	Imre Péntek (pentek.imre)
Component:	HotPlug	Assignee:	Greg Kroah-Hartman (greg)
Status:	REJECTED UNREPRODUCIBLE
Severity:	normal
Priority:	P2
Hardware:	i386
OS:	Linux
Kernel Version:	2.6.14-rc2-3	Subsystem:
Regression:	---	Bisected commit-id:
Bug Depends on:
Bug Blocks:	5089

Description Imre Péntek 2005-10-06 09:38:30 UTC

Most recent kernel where this bug did not occur: I don't know
Distribution: UHU-Linux dev (2.6.14-rc2-3)
Hardware Environment: amd athlon xp 64 3000+ laptop
Software Environment: hal 0.4.7
Problem Description: my nokia phone usb connection cable dooesn't works.
Steps to reproduce:
just plug it, then see dmesg:

[17182878.188000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[17182878.964000] usbcore: registered new driver usbserial
[17182878.968000] drivers/usb/serial/usb-serial.c: USB Serial support registered
for Generic
[17182878.972000] usbcore: registered new driver usbserial_generic
[17182878.972000] drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
[17182878.992000] drivers/usb/serial/usb-serial.c: USB Serial support registered
for TI USB 3410 1 port adapter
[17182878.996000] drivers/usb/serial/usb-serial.c: USB Serial support registered
for TI USB 5052 2 port adapter
[17182879.000000] ti_usb_3410_5052 3-1:1.0: TI USB 3410 1 port adapter converter
detected
[17182879.652000] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[17182879.800000] usb 3-1: device firmware changed
[17182879.800000] ti_usb_3410_5052: probe of 3-1:1.0 failed with error -5
[17182879.800000] usbcore: registered new driver ti_usb_3410_5052
[17182879.800000] drivers/usb/serial/ti_usb_3410_5052.c: TI USB 3410/5052 Serial
Driver v0.9
[17182879.800000] usb 3-1: USB disconnect, address 2
[17182879.916000] usb 3-1: new full speed USB device using uhci_hcd and address 3
[17182880.108000] usb 3-1: configuration #1 chosen from 2 choices
[17182880.112000] ti_usb_3410_5052 3-1:1.0: TI USB 3410 1 port adapter converter
detected
[17182880.112000] ti_usb_3410_5052: probe of 3-1:1.0 failed with error -5
[17182958.588000] usb 3-1: USB disconnect, address 3

Comment 1 Greg Kroah-Hartman 2005-10-06 09:57:45 UTC

Can you attach the file /proc/bus/usb/devices when the device is plugged in?

Comment 2 Imre Péntek 2005-10-09 13:47:19 UTC

now some weird thing happened, so after plugging this device /var/log/syslog
contains some
Oct  9 22:45:56 localhost kernel: [17179859.580000] hub 3-0:1.0:
connect-debounce failed, port 1 disabled
messages, ti_usb_3410_5052 module doesn't loads into the memory, but anyways my
/proc/bus/usb/devices file after attaching this device:

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.14-rc2-3 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.14-rc2-3 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.14-rc2-3 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

Comment 3 Greg Kroah-Hartman 2005-10-10 17:07:08 UTC

The device is not being found by the kernel in that file.

Can you post the whole log from when you plug the device in?  (as a attachment
please, not in the bug report itself.)

And if you reboot, does the device get found?  And if so, can you attach
the /proc/bus/usb/devices file from that?

Comment 4 Imre Péntek 2005-10-11 08:05:50 UTC

I can't reproduce it, sorry.

Comment 5 Greg Kroah-Hartman 2005-10-11 09:04:57 UTC

So the problem doesn't happen anymore?  great.  If it does, please reopen
this bug.