Bug 5349

Summary: USB card detected, but err : device not accepting address
Product: Drivers Reporter: Pieter E Smit (kernelbugzilla)
Component: USBAssignee: David Brownell (dbrownell)
Status: REJECTED INSUFFICIENT_DATA    
Severity: normal CC: greg
Priority: P2    
Hardware: i386   
OS: Linux   
Kernel Version: 2.6.14-rc3 Subsystem:
Regression: --- Bisected commit-id:
Bug Depends on:    
Bug Blocks: 5089    

Description Pieter E Smit 2005-10-02 13:25:21 UTC 
Most recent kernel where this bug did not occur:
Distribution: Debian
Hardware Environment: Old dual cpu server with pci usb card
Software Environment: Debian SID
Problem Description: USB card detected, driver loaded, but ports not working

Possably related bug 2975

Steps to reproduce:
Plug in usb mouse or memory stick, see errors in syslog about device not
accepting its id.

# dmesg | grep usb
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.14-rc3pesa ohci_hcd
usb usb1: SerialNumber: 0000:01:07.0
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: no power switching (usb 1.0)
usb 1-1: new low speed USB device using ohci_hcd and address 2
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new low speed USB device using ohci_hcd and address 3
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new low speed USB device using ohci_hcd and address 4
usb 1-1: device not accepting address 4, error -110
usb 1-1: new low speed USB device using ohci_hcd and address 5
usb 1-1: device not accepting address 5, error -110
usb 1-2: new full speed USB device using ohci_hcd and address 6
usb 1-2: device descriptor read/64, error -110
usb 1-2: device descriptor read/64, error -110
usb 1-2: new full speed USB device using ohci_hcd and address 7
usb 1-2: device descriptor read/64, error -110
usb 1-2: device descriptor read/64, error -110
usb 1-2: new full speed USB device using ohci_hcd and address 8
usb 1-2: device not accepting address 8, error -110
usb 1-2: new full speed USB device using ohci_hcd and address 9
usb 1-2: device not accepting address 9, error -110

s# lspci -vvv
0000:00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 32

0000:00:07.0 VGA compatible controller: Cirrus Logic GD 5436 [Alpine] (prog-if
00 [VGA])
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Region 0: Memory at 41000000 (32-bit, non-prefetchable) [size=16M]
        Expansion ROM at 20110000 [disabled] [size=32K]

0000:00:0e.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871 (rev 03)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 48 (2000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 15
        Region 0: I/O ports at a000 [disabled] [size=256]
        Region 1: Memory at 40100000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 20100000 [disabled] [size=64K]

0000:00:10.0 PCI bridge: IBM IBM27-82351 (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 248, Cache Line Size: 0x08 (32 bytes)
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=248
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: 40000000-400fffff
        Prefetchable memory behind bridge: 20000000-200fffff
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

0000:00:13.0 Non-VGA unclassified device: Intel Corp. 82375EB/SB PCI to EISA
Bridge (rev 15)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 248

0000:01:04.0 SCSI storage controller: Adaptec AIC-7880U
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 144 (2000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 9000 [disabled] [size=256]
        Region 1: Memory at 40002000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 20000000 [disabled] [size=64K]

0000:01:05.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32
LANCE] (rev 16)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 144 (1500ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 9100 [size=32]
        Region 1: Memory at 40001000 (32-bit, non-prefetchable) [size=32]
        Expansion ROM at 20010000 [disabled] [size=64K]

0000:01:07.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
        Subsystem: OPTi Inc. 82C861
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 144, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=4K]



When i unload all the usb modules i am unable to unload 
usbcore               118304  1 

here is the output from loading the module
# modprobe  ohci_hcd
Oct  2 22:15:55 pumba kernel: ohci_hcd: 2005 April 22 USB 1.1 'Open' Host
Controller (OHCI) Driver (PCI)
Oct  2 22:15:55 pumba kernel: ohci_hcd: block sizes: ed 64 td 64
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: OHCI Host Controller
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: new USB bus registered,
assigned bus number 1
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: irq 9, io mem 0x40000000
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: WARNING: OPTi workarounds
unavailable
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: resetting from state
'reset', control = 0x0
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: enabling initreset quirk
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: OHCI controller state
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: OHCI 1.0, NO legacy support
registers
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: control 0x083
HCFS=operational CBSR=3
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: cmdstatus 0x00000 SOC=0
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: intrstatus 0x00000044 RHSC SF
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: intrenable 0x8000000a MIE
RD WDH
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: fminterval a7782edf
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: hcca frame #0004
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: roothub.a 01000202 POTPGT=1
NPS NDP=2(2)
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: roothub.b 00000000
PPCM=0000 DR=0000
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: roothub.status 00008000 DRWE
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: roothub.portstatus [0]
0x00010301 CSC LSDA PPS CCS
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: roothub.portstatus [1]
0x00010101 CSC PPS CCS
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: created debug files
Oct  2 22:15:55 pumba kernel: usb usb1: default language 0x0409
Oct  2 22:15:55 pumba kernel: usb usb1: new device strings: Mfr=3, Product=2,
SerialNumber=1
Oct  2 22:15:55 pumba kernel: usb usb1: Product: OHCI Host Controller
Oct  2 22:15:55 pumba kernel: usb usb1: Manufacturer: Linux 2.6.14-rc3pesa ohci_hcd
Oct  2 22:15:55 pumba kernel: usb usb1: SerialNumber: 0000:01:07.0
Oct  2 22:15:55 pumba kernel: usb usb1: hotplug
Oct  2 22:15:55 pumba kernel: usb usb1: adding 1-0:1.0 (config #1, interface 0)
Oct  2 22:15:55 pumba kernel: usb 1-0:1.0: hotplug
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: usb_probe_interface
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: usb_probe_interface - got id
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: USB hub found
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: 2 ports detected
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: standalone hub
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: no power switching (usb 1.0)
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: global over-current protection
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: power on to power good time: 2ms
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: local power source is good
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: no over-current condition exists
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0000
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: port 1, status 0301, change 0001, 1.5
Mb/s
Oct  2 22:15:55 pumba kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable
100ms status 0x301
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:15:55 pumba kernel: usb 1-1: new low speed USB device using ohci_hcd
and address 2
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 1 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:15:55 pumba last message repeated 2 times
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:15:55 pumba kernel: usb 1-1: device descriptor read/64, error -110
Oct  2 22:15:55 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 1 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:15:56 pumba last message repeated 2 times
Oct  2 22:15:56 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:15:56 pumba kernel: usb 1-1: device descriptor read/64, error -110
Oct  2 22:15:56 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:15:56 pumba kernel: usb 1-1: new low speed USB device using ohci_hcd
and address 3
Oct  2 22:15:56 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 1 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:15:56 pumba last message repeated 2 times
Oct  2 22:15:56 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:15:56 pumba kernel: usb 1-1: device descriptor read/64, error -110
Oct  2 22:15:56 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 1 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:15:56 pumba last message repeated 2 times
Oct  2 22:15:56 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:15:56 pumba kernel: usb 1-1: device descriptor read/64, error -110
Oct  2 22:15:57 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:15:57 pumba kernel: usb 1-1: new low speed USB device using ohci_hcd
and address 4
Oct  2 22:15:57 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 1 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:15:57 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 1 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:15:57 pumba kernel: usb 1-1: device not accepting address 4, error -110
Oct  2 22:15:57 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:15:57 pumba kernel: usb 1-1: new low speed USB device using ohci_hcd
and address 5
Oct  2 22:15:57 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 1 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:15:57 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 1 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:15:58 pumba usb.agent[4503]:      usbcore: already loaded
Oct  2 22:15:58 pumba udev[4534]: creating device node '/dev/usbdev1.1'
Oct  2 22:15:58 pumba kernel: usb 1-1: device not accepting address 5, error -110
Oct  2 22:15:58 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00010101 CSC PPS CCS
Oct  2 22:15:58 pumba kernel: hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
Oct  2 22:15:58 pumba kernel: hub 1-0:1.0: debounce: port 2: total 100ms stable
100ms status 0x101
Oct  2 22:15:58 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Oct  2 22:15:58 pumba kernel: usb 1-2: new full speed USB device using ohci_hcd
and address 6
Oct  2 22:15:58 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 2 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:15:58 pumba last message repeated 2 times
Oct  2 22:15:58 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Oct  2 22:15:58 pumba kernel: usb 1-2: device descriptor read/64, error -110
Oct  2 22:15:58 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 2 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:15:58 pumba last message repeated 2 times
Oct  2 22:15:58 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Oct  2 22:15:58 pumba kernel: usb 1-2: device descriptor read/64, error -110
Oct  2 22:15:59 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Oct  2 22:15:59 pumba kernel: usb 1-2: new full speed USB device using ohci_hcd
and address 7
Oct  2 22:15:59 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 2 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:15:59 pumba last message repeated 2 times
Oct  2 22:15:59 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Oct  2 22:15:59 pumba kernel: usb 1-2: device descriptor read/64, error -110
Oct  2 22:15:59 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 2 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:15:59 pumba last message repeated 2 times
Oct  2 22:15:59 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Oct  2 22:15:59 pumba kernel: usb 1-2: device descriptor read/64, error -110
Oct  2 22:15:59 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Oct  2 22:15:59 pumba kernel: usb 1-2: new full speed USB device using ohci_hcd
and address 8
Oct  2 22:15:59 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 2 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:16:00 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 2 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:16:00 pumba kernel: usb 1-2: device not accepting address 8, error -110
Oct  2 22:16:00 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Oct  2 22:16:00 pumba kernel: usb 1-2: new full speed USB device using ohci_hcd
and address 9
Oct  2 22:16:00 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 2 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:16:00 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a41c0 path 2 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:16:00 pumba kernel: usb 1-2: device not accepting address 9, error -110
Oct  2 22:16:00 pumba kernel: hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004





The memory stick seem to have a problem with the address assigned ?
When i un-plug the usb mouse
Oct  2 22:25:13 pumba kernel: hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
Oct  2 22:25:13 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [0] = 0x00010300 CSC LSDA PPS
Oct  2 22:25:13 pumba kernel: hub 1-0:1.0: port 1, status 0300, change 0001, 1.5
Mb/s
Oct  2 22:25:14 pumba kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable
100ms status 0x300


And unplug the memory stick
Oct  2 22:27:16 pumba kernel: hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
Oct  2 22:27:16 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00010100 CSC PPS
Oct  2 22:27:16 pumba kernel: hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
Oct  2 22:27:16 pumba kernel: hub 1-0:1.0: debounce: port 2: total 100ms stable
100ms status 0x100




Re-insert the mouse
Oct  2 22:28:08 pumba kernel: hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
Oct  2 22:28:08 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
Oct  2 22:28:08 pumba kernel: hub 1-0:1.0: port 2, status 0301, change 0001, 1.5
Mb/s
Oct  2 22:28:08 pumba kernel: hub 1-0:1.0: debounce: port 2: total 100ms stable
100ms status 0x301
Oct  2 22:28:09 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:28:09 pumba kernel: usb 1-2: new low speed USB device using ohci_hcd
and address 10
Oct  2 22:28:09 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a4940 path 2 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:28:09 pumba last message repeated 2 times
Oct  2 22:28:09 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:28:09 pumba kernel: usb 1-2: device descriptor read/64, error -110
Oct  2 22:28:09 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a4940 path 2 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:28:09 pumba last message repeated 2 times
Oct  2 22:28:09 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:28:09 pumba kernel: usb 1-2: device descriptor read/64, error -110
Oct  2 22:28:09 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:28:09 pumba kernel: usb 1-2: new low speed USB device using ohci_hcd
and address 11
Oct  2 22:28:09 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a4940 path 2 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:28:09 pumba last message repeated 2 times
Oct  2 22:28:09 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:28:09 pumba kernel: usb 1-2: device descriptor read/64, error -110
Oct  2 22:28:10 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a4940 path 2 ep0in
5ec20000 cc 5 --> status -110
Oct  2 22:28:10 pumba last message repeated 2 times
Oct  2 22:28:10 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:28:10 pumba kernel: usb 1-2: device descriptor read/64, error -110
Oct  2 22:28:10 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:28:10 pumba kernel: usb 1-2: new low speed USB device using ohci_hcd
and address 12
Oct  2 22:28:10 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a4940 path 2 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:28:10 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a4940 path 2 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:28:10 pumba kernel: usb 1-2: device not accepting address 12, error -110
Oct  2 22:28:11 pumba kernel: ohci_hcd 0000:01:07.0: GetStatus
roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
Oct  2 22:28:11 pumba kernel: usb 1-2: new low speed USB device using ohci_hcd
and address 13
Oct  2 22:28:11 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a4940 path 2 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:28:11 pumba kernel: ohci_hcd 0000:01:07.0: urb d43a4940 path 2 ep0out
5ec20000 cc 5 --> status -110
Oct  2 22:28:11 pumba kernel: usb 1-2: device not accepting address 13, error -110
Oct  2 22:28:11 pumba kernel: hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004


Ok let me know what else i should collect.
Comment 1 David Brownell 2005-10-05 11:10:19 UTC 
OPTi cards have always been trouble ... especially the old ones,
which have some nasty chip errata (the ones encouraging that
driver to say "OPTi workarounds unavailable").  Apparently
Apple's Darwin code has workarounds, and they're so nasty that
I expect Linux will never merge them.

Has this card ever worked on any Linux?  If so, when did it
stop working?

Your best bet may be to use a better add-in PCI card.  My
general advice is to avoid ones with VIA chips, but I've
had plenty of success with USB 2.0 cards that have chips
from NEC, ALI, and Philips.
Comment 2 Greg Kroah-Hartman 2006-03-06 10:40:14 UTC 
No response in 5 months, closing.  If this is still a problem, please reopen
with the requested information.