8784 – ata_piix cannot see ICHx IDE devices

Bug 8784 - ata_piix cannot see ICHx IDE devices

Summary: ata_piix cannot see ICHx IDE devices

Status:	CLOSED CODE_FIX

Alias:	None

Product:	IO/Storage
Classification:	Unclassified
Component:	Serial ATA (show other bugs)
Hardware:	All Linux

Importance:	P1 normal
Assignee:	Tejun Heo

URL:
Keywords:

Depends on:
Blocks:

Reported:	2007-07-19 13:21 UTC by Edward Amsden
Modified:	2007-08-08 06:15 UTC (History)
CC List:	2 users (show)

See Also:
Kernel Version:	2.6.22
Subsystem:
Regression:	---
Bisected commit-id:

Attachments
ata_piix dmesg.log (23.60 KB, text/plain) 2007-07-24 08:05 UTC, Edward Amsden	Details
bug8784-debug.patch (2.23 KB, patch) 2007-07-30 01:25 UTC, Tejun Heo	Details \| Diff
dmesg output with proposed patch applied (73.08 KB, text/x-log) 2007-07-31 17:47 UTC, Persio Barros	Details
dmesg log from 2.6.22.1 kernel with ata debug patch applied (23.40 KB, text/x-log) 2007-08-01 14:10 UTC, Edward Amsden	Details
ata_piix-force-classes.patch (873 bytes, patch) 2007-08-01 23:17 UTC, Tejun Heo	Details \| Diff
log from kernel with ata debug and ata forceclass patches applied (23.38 KB, text/x-log) 2007-08-03 12:59 UTC, Edward Amsden	Details
log from kernel with ata debug and ata forceclass patches applied (25.09 KB, text/x-log) 2007-08-06 05:53 UTC, Edward Amsden	Details
dmesg from ide piix kernel. ide cdrom at /dev/hda (24.06 KB, text/x-log) 2007-08-06 05:57 UTC, Edward Amsden	Details
log from vanilla 2.6.22 kernel, cdrom not detected (23.27 KB, text/x-log) 2007-08-06 06:02 UTC, Edward Amsden	Details
assume-ATA-on-failed-diagnostic.patch (5.41 KB, patch) 2007-08-06 07:02 UTC, Tejun Heo	Details \| Diff
DMESG from kernel with ata fallback patch (23.26 KB, text/x-log) 2007-08-06 12:08 UTC, Edward Amsden	Details
assume-ATA-on-failed-diagnostic-take2.patch (5.56 KB, patch) 2007-08-07 01:13 UTC, Tejun Heo	Details \| Diff
DMESG from successful ata fallback patch. CDROM detected (24.37 KB, text/x-log) 2007-08-07 08:09 UTC, Edward Amsden	Details
Show Obsolete (4) Add an attachment (proposed patch, testcase, etc.)

Description Edward Amsden 2007-07-19 13:21:44 UTC

Most recent kernel where this bug did not occur:2.6.19 (Knoppix)
Distribution:ubuntu
Hardware Environment: intel ich4 chipset
Software Environment: ubuntu gutsy gibbon testing
Problem Description: ata_piix does not detect ide drives with intel ICHx chipsets. This problem has been the subject of numerous bug reports and forum posts in the ubuntu community. The most obvious manifestation is when a user succesfully begins to boot the ubuntu desktop cd, only to have it fail as it attempts to mount the file system. another manifestation occurs when a user with an ide or sata hard drive on an ICHx chipset machine attempts to boot after upgrading the kernel from 2.6.17 (in ubuntu 6.10) to 2.6.20 (in ubuntu 7.04)

Steps to reproduce: attempt to boot ubuntu with kernel 2.6.20 - 2.6.22 on a machine with an intel ide chipset. Any drives attached to the ide bus will not be recognized. I am writing this on an ubuntu machine which uses the ich4 ide bus to connect to the cd drive, but a scsi bus for the hard drive. This necessitated a netboot installation, and the installed system is still unable to utilize the hard disk.

Here is the dmesg|grep ata output (with two irrelevant lines containing the word "data" removed)
[ 45.780805] libata version 2.21 loaded.
[ 45.782248] ata_piix 0000:00:1f.1: version 2.11
[ 45.782435] scsi0 : ata_piix
[ 45.782496] scsi1 : ata_piix
[ 45.782527] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000124a0 irq 14
[ 45.782530] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000124a8 irq 15
[ 45.782555] ata1: port disabled. ignoring.

Comment 1 Anonymous Emailer 2007-07-19 13:26:40 UTC

Reply-To: akpm@linux-foundation.org

On Thu, 19 Jul 2007 13:16:27 -0700 (PDT)
bugme-daemon@bugzilla.kernel.org wrote:

> http://bugzilla.kernel.org/show_bug.cgi?id=8784
> 
>            Summary: ata_piix cannot see ICHx IDE devices
>            Product: IO/Storage
>            Version: 2.5
>      KernelVersion: 2.6.22
>           Platform: All
>         OS/Version: Linux
>               Tree: Mainline
>             Status: NEW
>           Severity: normal
>           Priority: P1
>          Component: IDE
>         AssignedTo: bzolnier@gmail.com
>         ReportedBy: amsden_linux@earthlink.net
> 
> 
> Most recent kernel where this bug did not occur:2.6.19 (Knoppix)
> Distribution:ubuntu
> Hardware Environment: intel ich4 chipset
> Software Environment: ubuntu gutsy gibbon testing
> Problem Description: ata_piix does not detect ide drives with intel ICHx
> chipsets. This problem has been the subject of numerous bug reports and forum
> posts in the ubuntu community. The most obvious manifestation is when a user
> succesfully begins to boot the ubuntu desktop cd, only to have it fail as it
> attempts to mount the file system. another manifestation occurs when a user
> with an ide or sata hard drive on an ICHx chipset machine attempts to boot
> after upgrading the kernel from 2.6.17 (in ubuntu 6.10) to 2.6.20 (in ubuntu
> 7.04)
> 
> Steps to reproduce: attempt to boot ubuntu with kernel 2.6.20 - 2.6.22 on a
> machine with an intel ide chipset. Any drives attached to the ide bus will
> not
> be recognized. I am writing this on an ubuntu machine which uses the ich4 ide
> bus to connect to the cd drive, but a scsi bus for the hard drive. This
> necessitated a netboot installation, and the installed system is still unable
> to utilize the hard disk.
> 
> Here is the dmesg|grep ata output (with two irrelevant lines containing the
> word "data" removed)
> [ 45.780805] libata version 2.21 loaded.
> [ 45.782248] ata_piix 0000:00:1f.1: version 2.11
> [ 45.782435] scsi0 : ata_piix
> [ 45.782496] scsi1 : ata_piix
> [ 45.782527] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma
> 0x000124a0 irq 14
> [ 45.782530] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
> 0x000124a8 irq 15
> [ 45.782555] ata1: port disabled. ignoring.
> 

That sounds rather serious?

Comment 2 Bartlomiej Zolnierkiewicz 2007-07-19 13:57:34 UTC

libata problem - reassigning

Edward, you may want to check if IDE driver (module piix) works fine by disabling libata (CONFIG_ATA=n) anabling CONFIG_IDE=y and CONFIG_BLK_DEV_PIIX=y.

Comment 3 Tejun Heo 2007-07-19 23:19:59 UTC

Please report the result of 'lspci -nnvvvxxx'.

Comment 4 Edward Amsden 2007-07-20 10:03:12 UTC

confirmed, compiled new kernel from 2.6.22 source, disabled module ata_piix, enabled ide_piix.

lspci output (running under ata_piix enabled kernel):
00:00.0 Host bridge [0600]: Intel Corporation E7505 Memory Controller Hub [8086:2550] (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device [103c:00cc]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <access denied>
00: 86 80 50 25 46 01 90 00 03 00 00 06 00 00 00 00
10: 08 00 00 f4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 cc 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge [0604]: Intel Corporation E7505/E7205 PCI-to-AGP Bridge [8086:2552] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: f1000000-f21fffff
        Prefetchable memory behind bridge: e0000000-f01fffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: <access denied>
00: 86 80 52 25 07 01 b0 00 03 00 04 06 00 40 01 00
10: 08 00 00 f8 00 00 00 00 00 01 01 20 f0 00 a0 22
20: 00 f1 10 f2 00 e0 10 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 0a 00

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device [103c:00cc]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 2440 [size=32]
00: 86 80 c2 24 05 00 80 02 01 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 24 00 00 00 00 00 00 00 00 00 00 3c 10 cc 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00

00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device [103c:00cc]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 2460 [size=32]
00: 86 80 c4 24 05 00 80 02 01 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 24 00 00 00 00 00 00 00 00 00 00 3c 10 cc 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Unknown device [103c:00cc]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 20
        Region 0: Memory at f0500000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
00: 86 80 cd 24 06 01 90 02 01 20 03 0c 00 00 00 00
10: 00 00 50 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 cc 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 04 00 00

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: f0200000-f04fffff
        Prefetchable memory behind bridge: 88000000-881fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00: 86 80 4e 24 07 01 80 00 81 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 40 10 10 80 02
20: 20 f0 40 f0 00 88 10 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
00: 86 80 c0 24 0f 01 80 02 01 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Unknown device [103c:00cc]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 24a0 [size=16]
        Region 5: Memory at 88200000 (32-bit, non-prefetchable) [size=1K]
00: 86 80 cb 24 07 00 80 02 01 8a 01 01 00 00 00 00
10: b1 24 00 00 c1 24 00 00 b9 24 00 00 c5 24 00 00
20: a1 24 00 00 00 00 20 88 00 00 00 00 3c 10 cc 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
        Subsystem: Hewlett-Packard Company Unknown device [103c:00c3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 22
        Region 0: I/O ports at 2000 [size=256]
        Region 1: I/O ports at 2400 [size=64]
        Region 2: Memory at f0500400 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at f0500600 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
00: 86 80 c5 24 07 00 90 02 01 00 01 04 00 00 00 00
10: 01 20 00 00 01 24 00 00 00 04 50 f0 00 06 50 f0
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c3 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV36GL [Quadro FX 1100] [10de:034e] (rev a1) (prog-if 00 [VGA])
        Subsystem: nVidia Corporation Unknown device [10de:01da]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        [virtual] Expansion ROM at f0000000 [disabled] [size=128K]
        Capabilities: <access denied>
00: de 10 4e 03 07 00 b0 02 a1 00 00 03 00 f8 00 00
10: 00 00 00 f1 08 00 00 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 da 01
30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 05 01

05:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet [14e4:16a6] (rev 02)
        Subsystem: Hewlett-Packard Company Unknown device [103c:00cc]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (16000ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at 88100000 [disabled] [size=64K]
        Capabilities: <access denied>
00: e4 14 a6 16 06 01 b0 02 02 00 00 02 10 40 00 00
10: 04 00 40 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 cc 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 40 00

05:0c.0 SCSI storage controller [0100]: Adaptec AIC-7902 U320 [9005:801f] (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device [103c:00cc]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: I/O ports at 1000 [disabled] [size=256]
        Region 1: Memory at f0410000 (64-bit, non-prefetchable) [size=8K]
        Region 3: I/O ports at 1400 [disabled] [size=256]
        [virtual] Expansion ROM at 88000000 [disabled] [size=512K]
        Capabilities: <access denied>
00: 05 90 1f 80 06 01 30 02 03 00 00 01 10 40 80 00
10: 01 10 00 00 04 00 41 f0 00 00 00 00 01 14 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 cc 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 28 19

05:0c.1 SCSI storage controller [0100]: Adaptec AIC-7902 U320 [9005:801f] (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device [103c:00cc]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 21
        Region 0: I/O ports at 1800 [disabled] [size=256]
        Region 1: Memory at f0412000 (64-bit, non-prefetchable) [size=8K]
        Region 3: I/O ports at 1c00 [disabled] [size=256]
        [virtual] Expansion ROM at 88080000 [disabled] [size=512K]
        Capabilities: <access denied>
00: 05 90 1f 80 06 01 30 02 03 00 00 01 10 40 80 00
10: 01 18 00 00 04 20 41 f0 00 00 00 00 01 1c 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 cc 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 02 28 19

Comment 5 Edward Amsden 2007-07-20 10:04:42 UTC

the ide_piix module is able to access the cdrom drive. This drive is present as hdc.

Comment 6 Edward Amsden 2007-07-20 10:09:53 UTC

correction to comment #1, the installed system can utilized the hard disk, but not the cdrom drive

Comment 7 Michal Piotrowski 2007-07-22 16:02:34 UTC

Might be related to:
http://lkml.org/lkml/2007/7/22/238

Comment 8 Tejun Heo 2007-07-22 19:47:57 UTC

Please post boot kernel log for both ata_piix and piix cases.  Thanks.

Comment 9 Edward Amsden 2007-07-23 09:57:43 UTC

the ata_piix kernel is tainted (ubuntu with nvidia driver module). I am blacklisting the module and will reboot without it, then post the log.

Comment 10 Edward Amsden 2007-07-23 11:05:00 UTC

ata_piix enabled kernel (untainted)
Jul 23 13:49:31 dad-desktop2 kernel: Inspecting /boot/System.map-2.6.22-8-generic
Jul 23 13:49:31 dad-desktop2 kernel: Loaded 25413 symbols from /boot/System.map-2.6.22-8-generic.
Jul 23 13:49:31 dad-desktop2 kernel: Symbols match kernel version 2.6.22.
Jul 23 13:49:31 dad-desktop2 kernel: No module symbols loaded - kernel modules not enabled. 
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000] Linux version 2.6.22-8-generic (buildd@palmer) (gcc version 4.1.3 20070629 (prerelease) (Ubuntu 4.1.2-13ubuntu2)) #1 SMP Thu Jul 12 15:59:45 GMT 2007
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000] BIOS-provided physical RAM map:
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff7b00 (usable)
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 000000007fff7b00 - 0000000080000000 (reserved)
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000] 1151MB HIGHMEM available.
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000] 896MB LOWMEM available.
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000] found SMP MP-table at 000f9bf0
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000] Entering add_active_range(0, 0, 524279) 0 entries of 256 used
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000] Zone PFN ranges:
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]   DMA             0 ->     4096
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]   Normal       4096 ->   229376
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000]   HighMem    229376 ->   524279
Jul 23 13:49:31 dad-desktop2 kernel: [    0.000000] early_node_map[1] active PFN ranges
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000]     0:        0 ->   524279
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] On node 0 totalpages: 524279
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000]   DMA zone: 0 pages reserved
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000]   Normal zone: 1760 pages used for memmap
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000]   HighMem zone: 2303 pages used for memmap
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000]   HighMem zone: 292600 pages, LIFO batch:31
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] DMI 2.3 present.
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: RSDP 000EA810, 0014 (r0 COMPAQ)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: RSDT 7FFF7B40, 0068 (r1 COMPAQ CPQ0054  20030821             0)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: FACP 7FFF7BF8, 0074 (r1 COMPAQ PLACER          1             0)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: DSDT 7FFF7D24, 0C29 (r1 COMPAQ     DSDT        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: FACS 7FFF7B00, 0040
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF894D, 059A (r1 COMPAQ  PROJECT        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF8EE7, 054C (r1 COMPAQ CORE_PNP        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF9433, 019B (r1 COMPAQ CORE_UTL        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF95CE, 0308 (r1 COMPAQ VILLTBL1        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF98D6, 053F (r1 COMPAQ LGCYLITE        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF9E15, 0167 (r1 COMPAQ    UART2        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF9F7C, 014E (r1 COMPAQ   FLOPPY        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: APIC 7FFF7C6C, 0084 (r1 COMPAQ PLACER          1             0)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFBA41, 00B2 (r1 COMPAQ     APIC        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: ASF! 7FFF7CF0, 0034 (r16 COMPAQ PLACER          1             0)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFA538, 0424 (r1 COMPAQ PNP_PRSS        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFA95C, 016D (r1 COMPAQ UR2_PRSS        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFAAC9, 0119 (r1 COMPAQ FPY_PRSS        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFABE2, 0098 (r1 COMPAQ       S1        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFB7E4, 00F0 (r1 COMPAQ      L08        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFBBDC, 0053 (r1 COMPAQ    FINIS        1 MSFT  100000E)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: PM-Timer IO Port: 0xf808
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Processor #0 15:2 APIC version 20
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Processor #6 15:2 APIC version 20
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: IRQ0 used by override.
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: IRQ2 used by override.
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] ACPI: IRQ9 used by override.
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Built 1 zonelists.  Total pages: 520184
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Kernel command line: root=UUID=f6a6aa8f-4313-49bf-8be6-522302b8f93f ro quiet splash
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] mapped APIC to ffffd000 (fee00000)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] mapped IOAPIC to ffffc000 (fec00000)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Enabling fast FPU save and restore... done.
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Initializing CPU#0
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jul 23 13:49:32 dad-desktop2 kernel: [    0.000000] Detected 3057.062 MHz processor.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.113985] Console: colour VGA+ 80x25
Jul 23 13:49:32 dad-desktop2 kernel: [   42.114666] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.115337] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227381] Memory: 2067972k/2097116k available (2009k kernel code, 27880k reserved, 918k data, 364k init, 1179612k highmem)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227392] virtual kernel memory layout:
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227393]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227394]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227395]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227396]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227397]       .init : 0xc03e1000 - 0xc043c000   ( 364 kB)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227398]       .data : 0xc02f6606 - 0xc03dbe64   ( 918 kB)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227399]       .text : 0xc0100000 - 0xc02f6606   (2009 kB)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227402] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.227450] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307243] Calibrating delay using timer specific routine.. 6118.57 BogoMIPS (lpj=12237143)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307278] Security Framework v1.0.0 initialized
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307290] SELinux:  Disabled at boot.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307304] Mount-cache hash table entries: 512
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307480] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307493] CPU: Trace cache: 12K uops, L1 D cache: 8K
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307495] CPU: L2 cache: 512K
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307498] CPU: Physical Processor ID: 0
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307500] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307513] Compat vDSO mapped to ffffe000.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.307530] Checking 'hlt' instruction... OK.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.323337] SMP alternatives: switching to UP code
Jul 23 13:49:32 dad-desktop2 kernel: [   42.323777] ACPI: Core revision 20070126
Jul 23 13:49:32 dad-desktop2 kernel: [   42.326012] CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
Jul 23 13:49:32 dad-desktop2 kernel: [   42.326033] SMP alternatives: switching to SMP code
Jul 23 13:49:32 dad-desktop2 kernel: [   42.326142] Booting processor 1/6 eip 3000
Jul 23 13:49:32 dad-desktop2 kernel: [   42.336553] Initializing CPU#1
Jul 23 13:49:32 dad-desktop2 kernel: [   42.414928] Calibrating delay using timer specific routine.. 6114.11 BogoMIPS (lpj=12228230)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.414936] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
Jul 23 13:49:32 dad-desktop2 kernel: [   42.414945] CPU: Trace cache: 12K uops, L1 D cache: 8K
Jul 23 13:49:32 dad-desktop2 kernel: [   42.414947] CPU: L2 cache: 512K
Jul 23 13:49:32 dad-desktop2 kernel: [   42.414949] CPU: Physical Processor ID: 3
Jul 23 13:49:32 dad-desktop2 kernel: [   42.414951] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Jul 23 13:49:32 dad-desktop2 kernel: [   42.415194] CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
Jul 23 13:49:32 dad-desktop2 kernel: [   42.415225] Total of 2 processors activated (12232.68 BogoMIPS).
Jul 23 13:49:32 dad-desktop2 kernel: [   42.415358] ENABLING IO-APIC IRQs
Jul 23 13:49:32 dad-desktop2 kernel: [   42.415541] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 23 13:49:32 dad-desktop2 kernel: [   42.562614] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.582582] Brought up 2 CPUs
Jul 23 13:49:32 dad-desktop2 kernel: [   42.643595] migration_cost=809
Jul 23 13:49:32 dad-desktop2 kernel: [   42.643759] Booting paravirtualized kernel on bare hardware
Jul 23 13:49:32 dad-desktop2 kernel: [   42.643829] Time: 13:48:46  Date: 06/23/107
Jul 23 13:49:32 dad-desktop2 kernel: [   42.643852] NET: Registered protocol family 16
Jul 23 13:49:32 dad-desktop2 kernel: [   42.643949] EISA bus registered
Jul 23 13:49:32 dad-desktop2 kernel: [   42.643954] ACPI: bus type pci registered
Jul 23 13:49:32 dad-desktop2 kernel: [   42.644952] PCI: PCI BIOS revision 2.20 entry at 0xecdfa, last bus=5
Jul 23 13:49:32 dad-desktop2 kernel: [   42.644954] PCI: Using configuration type 1
Jul 23 13:49:32 dad-desktop2 kernel: [   42.644956] Setting up standard PCI resources
Jul 23 13:49:32 dad-desktop2 kernel: [   42.646197] ACPI: EC: Look up EC in DSDT
Jul 23 13:49:32 dad-desktop2 kernel: [   42.647511] ACPI: Interpreter enabled
Jul 23 13:49:32 dad-desktop2 kernel: [   42.647515] ACPI: (supports S0 S1 S4 S5)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.647530] ACPI: Using IOAPIC for interrupt routing
Jul 23 13:49:32 dad-desktop2 kernel: [   42.650989] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.651001] PCI: Probing PCI hardware (bus 00)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.651333] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
Jul 23 13:49:32 dad-desktop2 kernel: [   42.651334] * this clock source is slow. If you are sure your timer does not have
Jul 23 13:49:32 dad-desktop2 kernel: [   42.651335] * this bug, please use "acpi_pm_good" to disable the workaround
Jul 23 13:49:32 dad-desktop2 kernel: [   42.651380] PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
Jul 23 13:49:32 dad-desktop2 kernel: [   42.651384] PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
Jul 23 13:49:32 dad-desktop2 kernel: [   42.651869] PCI: Transparent bridge - 0000:00:1e.0
Jul 23 13:49:32 dad-desktop2 kernel: [   42.651897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 23 13:49:32 dad-desktop2 kernel: [   42.652081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Jul 23 13:49:32 dad-desktop2 kernel: [   42.654584] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.654656] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.654725] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.654795] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.654863] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.654933] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.655002] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.655072] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.655180] Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 23 13:49:32 dad-desktop2 kernel: [   42.655192] pnp: PnP ACPI init
Jul 23 13:49:32 dad-desktop2 kernel: [   42.655202] ACPI: bus type pnp registered
Jul 23 13:49:32 dad-desktop2 kernel: [   42.657687] pnp: PnP ACPI: found 15 devices
Jul 23 13:49:32 dad-desktop2 kernel: [   42.657690] ACPI: ACPI bus type pnp unregistered
Jul 23 13:49:32 dad-desktop2 kernel: [   42.657694] PnPBIOS: Disabled by ACPI PNP
Jul 23 13:49:32 dad-desktop2 kernel: [   42.657759] PCI: Using ACPI for IRQ routing
Jul 23 13:49:32 dad-desktop2 kernel: [   42.657762] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695581] NET: Registered protocol family 8
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695583] NET: Registered protocol family 20
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695726] pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695733] pnp: 00:0d: ioport range 0x400-0x41f has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695736] pnp: 00:0d: ioport range 0x420-0x43f has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695738] pnp: 00:0d: ioport range 0x440-0x45f has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695741] pnp: 00:0d: ioport range 0x460-0x47f has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695743] pnp: 00:0d: ioport range 0xf800-0xf81f has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695746] pnp: 00:0d: ioport range 0xf820-0xf83f has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695748] pnp: 00:0d: ioport range 0xf840-0xf85f has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695750] pnp: 00:0d: ioport range 0xf860-0xf87f has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695757] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695760] pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695762] pnp: 00:0e: iomem range 0x80000000-0x800fffff has been reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.695765] pnp: 00:0e: iomem range 0xe8000-0xfffff could not be reserved
Jul 23 13:49:32 dad-desktop2 kernel: [   42.698127] Time: tsc clocksource has been installed.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726099] PCI: Bridge: 0000:00:01.0
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726101]   IO window: disabled.
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726105]   MEM window: f1000000-f21fffff
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726109]   PREFETCH window: e0000000-f01fffff
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726114] PCI: Bridge: 0000:00:1e.0
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726117]   IO window: 1000-1fff
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726122]   MEM window: f0200000-f04fffff
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726127]   PREFETCH window: 88000000-881fffff
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726145] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jul 23 13:49:32 dad-desktop2 kernel: [   42.726158] NET: Registered protocol family 2
Jul 23 13:49:32 dad-desktop2 kernel: [   42.765984] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.766149] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.767924] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.768631] TCP: Hash tables configured (established 131072 bind 65536)
Jul 23 13:49:32 dad-desktop2 kernel: [   42.768636] TCP reno registered
Jul 23 13:49:32 dad-desktop2 kernel: [   42.778121] checking if image is initramfs... it is
Jul 23 13:49:32 dad-desktop2 kernel: [   43.224723] Switched to high resolution mode on CPU 1
Jul 23 13:49:32 dad-desktop2 kernel: [   43.228592] Switched to high resolution mode on CPU 0
Jul 23 13:49:32 dad-desktop2 kernel: [   43.279511] Freeing initrd memory: 6765k freed
Jul 23 13:49:32 dad-desktop2 kernel: [   43.279915] audit: initializing netlink socket (disabled)
Jul 23 13:49:32 dad-desktop2 kernel: [   43.279934] audit(1185198526.852:1): initialized
Jul 23 13:49:32 dad-desktop2 kernel: [   43.280068] highmem bounce pool size: 64 pages
Jul 23 13:49:32 dad-desktop2 kernel: [   43.282579] VFS: Disk quotas dquot_6.5.1
Jul 23 13:49:32 dad-desktop2 kernel: [   43.282639] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 23 13:49:32 dad-desktop2 kernel: [   43.282750] io scheduler noop registered
Jul 23 13:49:32 dad-desktop2 kernel: [   43.282752] io scheduler anticipatory registered
Jul 23 13:49:32 dad-desktop2 kernel: [   43.282754] io scheduler deadline registered
Jul 23 13:49:32 dad-desktop2 kernel: [   43.282768] io scheduler cfq registered (default)
Jul 23 13:49:32 dad-desktop2 kernel: [   43.282830] Boot video device is 0000:01:00.0
Jul 23 13:49:32 dad-desktop2 kernel: [   43.283079] isapnp: Scanning for PnP cards...
Jul 23 13:49:32 dad-desktop2 kernel: [   43.636046] isapnp: No Plug & Play device found
Jul 23 13:49:32 dad-desktop2 kernel: [   43.664322] Real Time Clock Driver v1.12ac
Jul 23 13:49:32 dad-desktop2 kernel: [   43.664446] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jul 23 13:49:32 dad-desktop2 kernel: [   43.665195] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 23 13:49:32 dad-desktop2 kernel: [   43.665476] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 23 13:49:32 dad-desktop2 kernel: [   43.666371] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jul 23 13:49:32 dad-desktop2 kernel: [   43.666522] input: Macintosh mouse button emulation as /class/input/input0
Jul 23 13:49:32 dad-desktop2 kernel: [   43.666637] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669113] serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669119] serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669347] mice: PS/2 mouse device common for all mice
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669499] EISA: Probing bus 0 at eisa.0
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669508] Cannot allocate resource for EISA slot 1
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669510] Cannot allocate resource for EISA slot 2
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669537] EISA: Detected 0 cards.
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669648] TCP cubic registered
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669661] NET: Registered protocol family 1
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669682] Using IPI No-Shortcut mode
Jul 23 13:49:32 dad-desktop2 kernel: [   43.669863]   Magic number: 15:898:837
Jul 23 13:49:32 dad-desktop2 kernel: [   43.670005]   hash matches device ptyu3
Jul 23 13:49:32 dad-desktop2 kernel: [   43.670468] Freeing unused kernel memory: 364k freed
Jul 23 13:49:32 dad-desktop2 kernel: [   43.695972] input: AT Translated Set 2 keyboard as /class/input/input1
Jul 23 13:49:32 dad-desktop2 kernel: [   44.883257] Capability LSM initialized
Jul 23 13:49:32 dad-desktop2 kernel: [   44.891979] ACPI: Processor [CPU0] (supports 8 throttling states)
Jul 23 13:49:32 dad-desktop2 kernel: [   44.892004] ACPI: Processor [CPU2] (supports 8 throttling states)
Jul 23 13:49:32 dad-desktop2 kernel: [   44.892017] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
Jul 23 13:49:32 dad-desktop2 kernel: [   44.892030] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
Jul 23 13:49:32 dad-desktop2 kernel: [   45.383508] usbcore: registered new interface driver usbfs
Jul 23 13:49:32 dad-desktop2 kernel: [   45.383536] usbcore: registered new interface driver hub
Jul 23 13:49:32 dad-desktop2 kernel: [   45.383560] usbcore: registered new device driver usb
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384446] USB Universal Host Controller Interface driver v3.0
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384511] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384523] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384527] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384666] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384694] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384826] usb usb1: configuration #1 chosen from 1 choice
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384854] hub 1-0:1.0: USB hub found
Jul 23 13:49:32 dad-desktop2 kernel: [   45.384862] hub 1-0:1.0: 2 ports detected
Jul 23 13:49:32 dad-desktop2 kernel: [   45.481715] SCSI subsystem initialized
Jul 23 13:49:32 dad-desktop2 kernel: [   45.486719] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
Jul 23 13:49:32 dad-desktop2 kernel: [   45.486735] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jul 23 13:49:32 dad-desktop2 kernel: [   45.486739] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jul 23 13:49:32 dad-desktop2 kernel: [   45.486765] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jul 23 13:49:32 dad-desktop2 kernel: [   45.486797] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002460
Jul 23 13:49:32 dad-desktop2 kernel: [   45.486911] usb usb2: configuration #1 chosen from 1 choice
Jul 23 13:49:32 dad-desktop2 kernel: [   45.486939] hub 2-0:1.0: USB hub found
Jul 23 13:49:32 dad-desktop2 kernel: [   45.486947] hub 2-0:1.0: 2 ports detected
Jul 23 13:49:32 dad-desktop2 kernel: [   45.487124] libata version 2.21 loaded.
Jul 23 13:49:32 dad-desktop2 kernel: [   45.502118] Floppy drive(s): fd0 is 1.44M
Jul 23 13:49:32 dad-desktop2 kernel: [   45.519965] FDC 0 is a post-1991 82077
Jul 23 13:49:32 dad-desktop2 kernel: [   45.590767] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
Jul 23 13:49:32 dad-desktop2 kernel: [   45.590785] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jul 23 13:49:32 dad-desktop2 kernel: [   45.590788] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jul 23 13:49:32 dad-desktop2 kernel: [   45.591023] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
Jul 23 13:49:32 dad-desktop2 kernel: [   45.591063] ehci_hcd 0000:00:1d.7: debug port 1
Jul 23 13:49:32 dad-desktop2 kernel: [   45.591070] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Jul 23 13:49:32 dad-desktop2 kernel: [   45.591082] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xf0500000
Jul 23 13:49:32 dad-desktop2 kernel: [   45.594956] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 23 13:49:32 dad-desktop2 kernel: [   45.595088] usb usb3: configuration #1 chosen from 1 choice
Jul 23 13:49:32 dad-desktop2 kernel: [   45.595119] hub 3-0:1.0: USB hub found
Jul 23 13:49:32 dad-desktop2 kernel: [   45.595131] hub 3-0:1.0: 6 ports detected
Jul 23 13:49:32 dad-desktop2 kernel: [   45.697481] tg3.c:v3.77 (May 31, 2007)
Jul 23 13:49:32 dad-desktop2 kernel: [   45.697520] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 21 (level, low) -> IRQ 19
Jul 23 13:49:32 dad-desktop2 kernel: [   45.737437] eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0b:cd:d5:ae:60
Jul 23 13:49:32 dad-desktop2 kernel: [   45.737444] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Jul 23 13:49:32 dad-desktop2 kernel: [   45.737447] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
Jul 23 13:49:32 dad-desktop2 kernel: [   45.737747] ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 19 (level, low) -> IRQ 17
Jul 23 13:49:32 dad-desktop2 kernel: [   60.920614] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
Jul 23 13:49:32 dad-desktop2 kernel: [   60.920617]         <Adaptec AIC7902 Ultra320 SCSI adapter>
Jul 23 13:49:32 dad-desktop2 kernel: [   60.920618]         aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
Jul 23 13:49:32 dad-desktop2 kernel: [   60.920874] ACPI: PCI Interrupt 0000:05:0c.1[B] -> GSI 22 (level, low) -> IRQ 20
Jul 23 13:49:32 dad-desktop2 kernel: [   60.925182] scsi 0:0:0:0: Direct-Access     SEAGATE  ST336607LW       HPS4 PQ: 0 ANSI: 3
Jul 23 13:49:32 dad-desktop2 kernel: [   60.925196]  target0:0:0: asynchronous
Jul 23 13:49:32 dad-desktop2 kernel: [   60.925199] scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
Jul 23 13:49:32 dad-desktop2 kernel: [   60.925210]  target0:0:0: Beginning Domain Validation
Jul 23 13:49:32 dad-desktop2 kernel: [   60.928438]  target0:0:0: wide asynchronous
Jul 23 13:49:32 dad-desktop2 kernel: [   60.930945]  target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM WRFLOW PCOMP (6.25 ns, offset 63)
Jul 23 13:49:32 dad-desktop2 kernel: [   60.940504]  target0:0:0: Ending Domain Validation
Jul 23 13:49:32 dad-desktop2 kernel: [   76.104010] scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
Jul 23 13:49:32 dad-desktop2 kernel: [   76.104012]         <Adaptec AIC7902 Ultra320 SCSI adapter>
Jul 23 13:49:32 dad-desktop2 kernel: [   76.104013]         aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
Jul 23 13:49:32 dad-desktop2 kernel: [   76.104737] ata_piix 0000:00:1f.1: version 2.11
Jul 23 13:49:32 dad-desktop2 kernel: [   76.104754] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Jul 23 13:49:32 dad-desktop2 kernel: [   76.104764] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
Jul 23 13:49:32 dad-desktop2 kernel: [   76.104811] PCI: Setting latency timer of device 0000:00:1f.1 to 64
Jul 23 13:49:32 dad-desktop2 kernel: [   76.107194] scsi2 : ata_piix
Jul 23 13:49:32 dad-desktop2 kernel: [   76.107571] scsi3 : ata_piix
Jul 23 13:49:32 dad-desktop2 kernel: [   76.107608] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000124a0 irq 14
Jul 23 13:49:32 dad-desktop2 kernel: [   76.107612] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000124a8 irq 15
Jul 23 13:49:32 dad-desktop2 kernel: [   76.107646] ata1: port disabled. ignoring.
Jul 23 13:49:32 dad-desktop2 kernel: [   76.122298] sd 0:0:0:0: [sda] 71132960 512-byte hardware sectors (36420 MB)
Jul 23 13:49:32 dad-desktop2 kernel: [   76.123388] sd 0:0:0:0: [sda] Write Protect is off
Jul 23 13:49:32 dad-desktop2 kernel: [   76.123393] sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08
Jul 23 13:49:32 dad-desktop2 kernel: [   76.124648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
Jul 23 13:49:32 dad-desktop2 kernel: [   76.125171] sd 0:0:0:0: [sda] 71132960 512-byte hardware sectors (36420 MB)
Jul 23 13:49:32 dad-desktop2 kernel: [   76.126218] sd 0:0:0:0: [sda] Write Protect is off
Jul 23 13:49:32 dad-desktop2 kernel: [   76.126221] sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08
Jul 23 13:49:32 dad-desktop2 kernel: [   76.127468] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
Jul 23 13:49:32 dad-desktop2 kernel: [   76.127471]  sda: sda1 sda2 sda3 < sda5 >
Jul 23 13:49:32 dad-desktop2 kernel: [   76.144748] sd 0:0:0:0: [sda] Attached SCSI disk
Jul 23 13:49:32 dad-desktop2 kernel: [   76.149481] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jul 23 13:49:32 dad-desktop2 kernel: [   76.440895] Attempting manual resume
Jul 23 13:49:32 dad-desktop2 kernel: [   76.440899] swsusp: Resume From Partition 8:5
Jul 23 13:49:32 dad-desktop2 kernel: [   76.440901] PM: Checking swsusp image.
Jul 23 13:49:32 dad-desktop2 kernel: [   76.441097] PM: Resume from disk failed.
Jul 23 13:49:32 dad-desktop2 kernel: [   76.464771] kjournald starting.  Commit interval 5 seconds
Jul 23 13:49:32 dad-desktop2 kernel: [   76.464784] EXT3-fs: mounted filesystem with ordered data mode.
Jul 23 13:49:32 dad-desktop2 kernel: [   82.765098] PM: Writing back config space on device 0000:05:02.0 at offset b (was 164714e4, writing cc103c)
Jul 23 13:49:32 dad-desktop2 kernel: [   82.765128] PM: Writing back config space on device 0000:05:02.0 at offset 3 (was 0, writing 4010)
Jul 23 13:49:32 dad-desktop2 kernel: [   82.765135] PM: Writing back config space on device 0000:05:02.0 at offset 2 (was 2000000, writing 2000002)
Jul 23 13:49:32 dad-desktop2 kernel: [   82.765141] PM: Writing back config space on device 0000:05:02.0 at offset 1 (was 2b00000, writing 2b00106)
Jul 23 13:49:32 dad-desktop2 kernel: [   82.765147] PM: Writing back config space on device 0000:05:02.0 at offset 0 (was 164714e4, writing 16a614e4)
Jul 23 13:49:32 dad-desktop2 kernel: [   83.861384] EDAC MC: Ver: 2.0.1 Jul 12 2007
Jul 23 13:49:32 dad-desktop2 kernel: [   83.873441] EDAC e7xxx: error reporting device not found:vendor 8086 device 0x2551 (broken BIOS?)
Jul 23 13:49:32 dad-desktop2 kernel: [   83.886137] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 23 13:49:32 dad-desktop2 kernel: [   83.893615] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 23 13:49:32 dad-desktop2 kernel: [   84.009785] Linux agpgart interface v0.102 (c) Dave Jones
Jul 23 13:49:32 dad-desktop2 kernel: [   84.011674] agpgart: Detected an Intel E7505 Chipset.
Jul 23 13:49:32 dad-desktop2 kernel: [   84.015037] agpgart: AGP aperture is 64M @ 0xf4000000
Jul 23 13:49:32 dad-desktop2 kernel: [   84.030411] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
Jul 23 13:49:32 dad-desktop2 kernel: [   84.030413]  don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
Jul 23 13:49:32 dad-desktop2 kernel: [   84.030415]  you are certain that your <4>intel_rng: system has a functional
Jul 23 13:49:32 dad-desktop2 kernel: [   84.030416]  RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
Jul 23 13:49:32 dad-desktop2 kernel: [   84.065014] iTCO_vendor_support: vendor-support=0
Jul 23 13:49:32 dad-desktop2 kernel: [   84.066067] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
Jul 23 13:49:32 dad-desktop2 kernel: [   84.236731] NET: Registered protocol family 17
Jul 23 13:49:32 dad-desktop2 kernel: [   84.488323] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22
Jul 23 13:49:32 dad-desktop2 kernel: [   84.488351] PCI: Setting latency timer of device 0000:00:1f.5 to 64
Jul 23 13:49:32 dad-desktop2 kernel: [   84.537503] tg3: eth0: Link is up at 100 Mbps, full duplex.
Jul 23 13:49:32 dad-desktop2 kernel: [   84.537505] tg3: eth0: Flow control is on for TX and on for RX.
Jul 23 13:49:32 dad-desktop2 kernel: [   84.606860] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
Jul 23 13:49:32 dad-desktop2 kernel: [   84.609509] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xf860)
Jul 23 13:49:32 dad-desktop2 kernel: [   84.609559] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jul 23 13:49:32 dad-desktop2 kernel: [   84.609568] input: PC Speaker as /class/input/input3
Jul 23 13:49:32 dad-desktop2 kernel: [   84.609763] parport_pc 00:07: reported by Plug and Play ACPI
Jul 23 13:49:32 dad-desktop2 kernel: [   84.609814] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Jul 23 13:49:32 dad-desktop2 kernel: [   84.858285] intel8x0_measure_ac97_clock: measured 55035 usecs
Jul 23 13:49:32 dad-desktop2 kernel: [   84.858289] intel8x0: clocking to 48000
Jul 23 13:49:32 dad-desktop2 kernel: [   85.624401] lp0: using parport0 (interrupt-driven).
Jul 23 13:49:32 dad-desktop2 kernel: [   85.671550] Adding 1220900k swap on /dev/disk/by-uuid/23e2caef-8a12-415e-a993-c04e763b68e2.  Priority:-1 extents:1 across:1220900k
Jul 23 13:49:32 dad-desktop2 kernel: [   85.935377] EXT3 FS on sda2, internal journal
Jul 23 13:49:32 dad-desktop2 kernel: [   86.203912] NTFS driver 2.1.28 [Flags: R/O MODULE].
Jul 23 13:49:32 dad-desktop2 kernel: [   86.255984] NTFS volume version 3.1.
Jul 23 13:49:32 dad-desktop2 kernel: [   86.827278] No dock devices found.
Jul 23 13:49:32 dad-desktop2 kernel: [   86.840253] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
Jul 23 13:49:32 dad-desktop2 kernel: [   86.915465] input: Power Button (FF) as /class/input/input4
Jul 23 13:49:32 dad-desktop2 kernel: [   86.915772] ACPI: Power Button (FF) [PWRF]
Jul 23 13:49:32 dad-desktop2 kernel: [   86.917173] input: Power Button (CM) as /class/input/input5
Jul 23 13:49:32 dad-desktop2 kernel: [   86.917428] ACPI: Power Button (CM) [PBTN]
Jul 23 13:49:34 dad-desktop2 kernel: [   89.845915] NET: Registered protocol family 10
Jul 23 13:49:34 dad-desktop2 kernel: [   89.846339] lo: Disabled Privacy Extensions
Jul 23 13:49:35 dad-desktop2 kernel: [   91.136213] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Jul 23 13:49:35 dad-desktop2 kernel: [   91.136218] apm: disabled - APM is not SMP safe.
Jul 23 13:49:37 dad-desktop2 kernel: [   92.922821] Bluetooth: Core ver 2.11
Jul 23 13:49:37 dad-desktop2 kernel: [   92.922901] NET: Registered protocol family 31
Jul 23 13:49:37 dad-desktop2 kernel: [   92.922905] Bluetooth: HCI device and connection manager initialized
Jul 23 13:49:37 dad-desktop2 kernel: [   92.922910] Bluetooth: HCI socket layer initialized
Jul 23 13:49:37 dad-desktop2 kernel: [   92.937478] Bluetooth: L2CAP ver 2.8
Jul 23 13:49:37 dad-desktop2 kernel: [   92.937484] Bluetooth: L2CAP socket layer initialized
Jul 23 13:49:37 dad-desktop2 kernel: [   93.043481] Bluetooth: RFCOMM socket layer initialized
Jul 23 13:49:37 dad-desktop2 kernel: [   93.043506] Bluetooth: RFCOMM TTY layer initialized
Jul 23 13:49:37 dad-desktop2 kernel: [   93.043509] Bluetooth: RFCOMM ver 1.8
Jul 23 13:49:44 dad-desktop2 kernel: [  100.384349] eth0: no IPv6 routers present

Comment 11 Edward Amsden 2007-07-23 11:13:55 UTC

piix kernel:
Jul 23 14:02:39 dad-desktop2 kernel: Cannot find map file.
Jul 23 14:02:39 dad-desktop2 kernel: No module symbols loaded - kernel modules not enabled. 
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Linux version 2.6.22idepiix (root@dad-desktop2) (gcc version 4.1.3 20070629 (prerelease) (Ubuntu 4.1.2-13ubuntu2)) #1 SMP Thu Jul 19 16:58:11 EDT 2007
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] BIOS-provided physical RAM map:
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff7b00 (usable)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 000000007fff7b00 - 0000000080000000 (reserved)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] 1151MB HIGHMEM available.
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] 896MB LOWMEM available.
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] found SMP MP-table at 000f9bf0
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Entering add_active_range(0, 0, 524279) 0 entries of 256 used
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Zone PFN ranges:
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   DMA             0 ->     4096
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   Normal       4096 ->   229376
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   HighMem    229376 ->   524279
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] early_node_map[1] active PFN ranges
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]     0:        0 ->   524279
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] On node 0 totalpages: 524279
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   DMA zone: 0 pages reserved
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   Normal zone: 1760 pages used for memmap
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   HighMem zone: 2303 pages used for memmap
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000]   HighMem zone: 292600 pages, LIFO batch:31
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] DMI 2.3 present.
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: RSDP 000EA810, 0014 (r0 COMPAQ)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: RSDT 7FFF7B40, 0068 (r1 COMPAQ CPQ0054  20030821             0)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: FACP 7FFF7BF8, 0074 (r1 COMPAQ PLACER          1             0)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: DSDT 7FFF7D24, 0C29 (r1 COMPAQ     DSDT        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: FACS 7FFF7B00, 0040
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF894D, 059A (r1 COMPAQ  PROJECT        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF8EE7, 054C (r1 COMPAQ CORE_PNP        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF9433, 019B (r1 COMPAQ CORE_UTL        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF95CE, 0308 (r1 COMPAQ VILLTBL1        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF98D6, 053F (r1 COMPAQ LGCYLITE        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF9E15, 0167 (r1 COMPAQ    UART2        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFF9F7C, 014E (r1 COMPAQ   FLOPPY        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: APIC 7FFF7C6C, 0084 (r1 COMPAQ PLACER          1             0)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFBA41, 00B2 (r1 COMPAQ     APIC        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: ASF! 7FFF7CF0, 0034 (r16 COMPAQ PLACER          1             0)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFA538, 0424 (r1 COMPAQ PNP_PRSS        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFA95C, 016D (r1 COMPAQ UR2_PRSS        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFAAC9, 0119 (r1 COMPAQ FPY_PRSS        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFABE2, 0098 (r1 COMPAQ       S1        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFB7E4, 00F0 (r1 COMPAQ      L08        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: SSDT 7FFFBBDC, 0053 (r1 COMPAQ    FINIS        1 MSFT  100000E)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: PM-Timer IO Port: 0xf808
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Processor #0 15:2 APIC version 20
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Processor #6 15:2 APIC version 20
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: IRQ0 used by override.
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: IRQ2 used by override.
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] ACPI: IRQ9 used by override.
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Built 1 zonelists.  Total pages: 520184
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Kernel command line: root=UUID=f6a6aa8f-4313-49bf-8be6-522302b8f93f ro single
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] mapped APIC to ffffd000 (fee00000)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] mapped IOAPIC to ffffc000 (fec00000)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Enabling fast FPU save and restore... done.
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Initializing CPU#0
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jul 23 14:02:39 dad-desktop2 kernel: [    0.000000] Detected 3057.075 MHz processor.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.227702] Console: colour VGA+ 80x25
Jul 23 14:02:39 dad-desktop2 kernel: [   39.231867] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.232591] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338024] Memory: 2032652k/2097116k available (2009k kernel code, 63256k reserved, 906k data, 364k init, 1179612k highmem)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338107] virtual kernel memory layout:
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338108]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338109]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338110]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338111]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338112]       .init : 0xc03df000 - 0xc043a000   ( 364 kB)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338113]       .data : 0xc02f6606 - 0xc03d8e64   ( 906 kB)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338114]       .text : 0xc0100000 - 0xc02f6606   (2009 kB)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338540] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.338691] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Jul 23 14:02:39 dad-desktop2 kernel: [   39.418548] Calibrating delay using timer specific routine.. 6118.56 BogoMIPS (lpj=12237137)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.418689] Security Framework v1.0.0 initialized
Jul 23 14:02:39 dad-desktop2 kernel: [   39.418753] SELinux:  Disabled at boot.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.418818] Mount-cache hash table entries: 512
Jul 23 14:02:39 dad-desktop2 kernel: [   39.419048] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
Jul 23 14:02:39 dad-desktop2 kernel: [   39.419060] CPU: Trace cache: 12K uops, L1 D cache: 8K
Jul 23 14:02:39 dad-desktop2 kernel: [   39.419154] CPU: L2 cache: 512K
Jul 23 14:02:39 dad-desktop2 kernel: [   39.419207] CPU: Physical Processor ID: 0
Jul 23 14:02:39 dad-desktop2 kernel: [   39.419261] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Jul 23 14:02:39 dad-desktop2 kernel: [   39.419275] Compat vDSO mapped to ffffe000.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.419342] Checking 'hlt' instruction... OK.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.434685] SMP alternatives: switching to UP code
Jul 23 14:02:39 dad-desktop2 kernel: [   39.435177] ACPI: Core revision 20070126
Jul 23 14:02:39 dad-desktop2 kernel: [   39.437483] CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
Jul 23 14:02:39 dad-desktop2 kernel: [   39.437637] SMP alternatives: switching to SMP code
Jul 23 14:02:39 dad-desktop2 kernel: [   39.437800] Booting processor 1/6 eip 3000
Jul 23 14:02:39 dad-desktop2 kernel: [   39.448373] Initializing CPU#1
Jul 23 14:02:39 dad-desktop2 kernel: [   39.526233] Calibrating delay using timer specific routine.. 6114.11 BogoMIPS (lpj=12228235)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.526241] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
Jul 23 14:02:39 dad-desktop2 kernel: [   39.526249] CPU: Trace cache: 12K uops, L1 D cache: 8K
Jul 23 14:02:39 dad-desktop2 kernel: [   39.526251] CPU: L2 cache: 512K
Jul 23 14:02:39 dad-desktop2 kernel: [   39.526253] CPU: Physical Processor ID: 3
Jul 23 14:02:39 dad-desktop2 kernel: [   39.526255] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Jul 23 14:02:39 dad-desktop2 kernel: [   39.526506] CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
Jul 23 14:02:39 dad-desktop2 kernel: [   39.526935] Total of 2 processors activated (12232.68 BogoMIPS).
Jul 23 14:02:39 dad-desktop2 kernel: [   39.527123] ENABLING IO-APIC IRQs
Jul 23 14:02:39 dad-desktop2 kernel: [   39.527354] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 23 14:02:39 dad-desktop2 kernel: [   39.673916] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.693976] Brought up 2 CPUs
Jul 23 14:02:39 dad-desktop2 kernel: [   39.754990] migration_cost=814
Jul 23 14:02:39 dad-desktop2 kernel: [   39.755286] Booting paravirtualized kernel on bare hardware
Jul 23 14:02:39 dad-desktop2 kernel: [   39.755412] Time: 14:01:01  Date: 06/23/107
Jul 23 14:02:39 dad-desktop2 kernel: [   39.755488] NET: Registered protocol family 16
Jul 23 14:02:39 dad-desktop2 kernel: [   39.755639] EISA bus registered
Jul 23 14:02:39 dad-desktop2 kernel: [   39.755695] ACPI: bus type pci registered
Jul 23 14:02:39 dad-desktop2 kernel: [   39.756744] PCI: PCI BIOS revision 2.20 entry at 0xecdfa, last bus=5
Jul 23 14:02:39 dad-desktop2 kernel: [   39.756800] PCI: Using configuration type 1
Jul 23 14:02:39 dad-desktop2 kernel: [   39.756854] Setting up standard PCI resources
Jul 23 14:02:39 dad-desktop2 kernel: [   39.758154] ACPI: EC: Look up EC in DSDT
Jul 23 14:02:39 dad-desktop2 kernel: [   39.759466] ACPI: Interpreter enabled
Jul 23 14:02:39 dad-desktop2 kernel: [   39.759523] ACPI: (supports S0 S1 S4 S5)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.759782] ACPI: Using IOAPIC for interrupt routing
Jul 23 14:02:39 dad-desktop2 kernel: [   39.763299] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.763365] PCI: Probing PCI hardware (bus 00)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.763699] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
Jul 23 14:02:39 dad-desktop2 kernel: [   39.763700] * this clock source is slow. If you are sure your timer does not have
Jul 23 14:02:39 dad-desktop2 kernel: [   39.763701] * this bug, please use "acpi_pm_good" to disable the workaround
Jul 23 14:02:39 dad-desktop2 kernel: [   39.763929] PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
Jul 23 14:02:39 dad-desktop2 kernel: [   39.763986] PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
Jul 23 14:02:39 dad-desktop2 kernel: [   39.764526] PCI: Transparent bridge - 0000:00:1e.0
Jul 23 14:02:39 dad-desktop2 kernel: [   39.764608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 23 14:02:39 dad-desktop2 kernel: [   39.764788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Jul 23 14:02:39 dad-desktop2 kernel: [   39.767274] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.767822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.768367] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.769000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.769552] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.770185] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.770730] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.771275] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.771860] Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 23 14:02:39 dad-desktop2 kernel: [   39.771928] pnp: PnP ACPI init
Jul 23 14:02:39 dad-desktop2 kernel: [   39.771992] ACPI: bus type pnp registered
Jul 23 14:02:39 dad-desktop2 kernel: [   39.774560] pnp: PnP ACPI: found 15 devices
Jul 23 14:02:39 dad-desktop2 kernel: [   39.774616] ACPI: ACPI bus type pnp unregistered
Jul 23 14:02:39 dad-desktop2 kernel: [   39.774672] PnPBIOS: Disabled by ACPI PNP
Jul 23 14:02:39 dad-desktop2 kernel: [   39.774792] PCI: Using ACPI for IRQ routing
Jul 23 14:02:39 dad-desktop2 kernel: [   39.774848] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jul 23 14:02:39 dad-desktop2 kernel: [   39.812633] NET: Registered protocol family 8
Jul 23 14:02:39 dad-desktop2 kernel: [   39.812687] NET: Registered protocol family 20
Jul 23 14:02:39 dad-desktop2 kernel: [   39.812881] pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.812942] pnp: 00:0d: ioport range 0x400-0x41f has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.812998] pnp: 00:0d: ioport range 0x420-0x43f has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813054] pnp: 00:0d: ioport range 0x440-0x45f has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813110] pnp: 00:0d: ioport range 0x460-0x47f has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813166] pnp: 00:0d: ioport range 0xf800-0xf81f has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813222] pnp: 00:0d: ioport range 0xf820-0xf83f has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813278] pnp: 00:0d: ioport range 0xf840-0xf85f has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813334] pnp: 00:0d: ioport range 0xf860-0xf87f has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813395] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813453] Time: tsc clocksource has been installed.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813513] pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813570] pnp: 00:0e: iomem range 0x80000000-0x800fffff has been reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.813628] pnp: 00:0e: iomem range 0xe8000-0xfffff could not be reserved
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844022] PCI: Bridge: 0000:00:01.0
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844076]   IO window: disabled.
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844130]   MEM window: f1000000-f21fffff
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844185]   PREFETCH window: e0000000-f01fffff
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844243] PCI: Bridge: 0000:00:1e.0
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844297]   IO window: 1000-1fff
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844353]   MEM window: f0200000-f04fffff
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844408]   PREFETCH window: 88000000-881fffff
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844479] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jul 23 14:02:39 dad-desktop2 kernel: [   39.844491] NET: Registered protocol family 2
Jul 23 14:02:39 dad-desktop2 kernel: [   39.885263] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.885479] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.887311] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.888085] TCP: Hash tables configured (established 131072 bind 65536)
Jul 23 14:02:39 dad-desktop2 kernel: [   39.888147] TCP reno registered
Jul 23 14:02:39 dad-desktop2 kernel: [   39.897403] checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
Jul 23 14:02:39 dad-desktop2 kernel: [   40.343883] Switched to high resolution mode on CPU 0
Jul 23 14:02:39 dad-desktop2 kernel: [   41.360149]  it is
Jul 23 14:02:39 dad-desktop2 kernel: [   43.003955] Freeing initrd memory: 42148k freed
Jul 23 14:02:39 dad-desktop2 kernel: [   43.004440] audit: initializing netlink socket (disabled)
Jul 23 14:02:39 dad-desktop2 kernel: [   43.004512] audit(1185199264.356:1): initialized
Jul 23 14:02:39 dad-desktop2 kernel: [   43.004700] highmem bounce pool size: 64 pages
Jul 23 14:02:39 dad-desktop2 kernel: [   43.007242] VFS: Disk quotas dquot_6.5.1
Jul 23 14:02:39 dad-desktop2 kernel: [   43.007353] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 23 14:02:39 dad-desktop2 kernel: [   43.007517] io scheduler noop registered
Jul 23 14:02:39 dad-desktop2 kernel: [   43.007571] io scheduler anticipatory registered
Jul 23 14:02:39 dad-desktop2 kernel: [   43.007625] io scheduler deadline registered
Jul 23 14:02:39 dad-desktop2 kernel: [   43.007690] io scheduler cfq registered (default)
Jul 23 14:02:39 dad-desktop2 kernel: [   43.007805] Boot video device is 0000:01:00.0
Jul 23 14:02:39 dad-desktop2 kernel: [   43.008055] isapnp: Scanning for PnP cards...
Jul 23 14:02:39 dad-desktop2 kernel: [   43.361082] isapnp: No Plug & Play device found
Jul 23 14:02:39 dad-desktop2 kernel: [   43.390496] Real Time Clock Driver v1.12ac
Jul 23 14:02:39 dad-desktop2 kernel: [   43.390671] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jul 23 14:02:39 dad-desktop2 kernel: [   43.391556] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 23 14:02:39 dad-desktop2 kernel: [   43.391910] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 23 14:02:39 dad-desktop2 kernel: [   43.392872] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jul 23 14:02:39 dad-desktop2 kernel: [   43.393092] input: Macintosh mouse button emulation as /class/input/input0
Jul 23 14:02:39 dad-desktop2 kernel: [   43.393257] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
Jul 23 14:02:39 dad-desktop2 kernel: [   43.395616] serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 23 14:02:39 dad-desktop2 kernel: [   43.395675] serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 23 14:02:39 dad-desktop2 kernel: [   43.395924] mice: PS/2 mouse device common for all mice
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396121] EISA: Probing bus 0 at eisa.0
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396182] Cannot allocate resource for EISA slot 1
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396236] Cannot allocate resource for EISA slot 2
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396315] EISA: Detected 0 cards.
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396474] TCP cubic registered
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396537] NET: Registered protocol family 1
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396610] Using IPI No-Shortcut mode
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396846]   Magic number: 15:180:31
Jul 23 14:02:39 dad-desktop2 kernel: [   43.396908]   hash matches device ttyde
Jul 23 14:02:39 dad-desktop2 kernel: [   43.397551] Freeing unused kernel memory: 364k freed
Jul 23 14:02:39 dad-desktop2 kernel: [   43.430891] input: AT Translated Set 2 keyboard as /class/input/input1
Jul 23 14:02:39 dad-desktop2 kernel: [   43.607308] ACPI: Processor [CPU0] (supports 8 throttling states)
Jul 23 14:02:39 dad-desktop2 kernel: [   43.607464] ACPI: Processor [CPU2] (supports 8 throttling states)
Jul 23 14:02:39 dad-desktop2 kernel: [   43.607607] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
Jul 23 14:02:39 dad-desktop2 kernel: [   43.607762] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
Jul 23 14:02:39 dad-desktop2 kernel: [   44.099510] usbcore: registered new interface driver usbfs
Jul 23 14:02:39 dad-desktop2 kernel: [   44.099605] usbcore: registered new interface driver hub
Jul 23 14:02:39 dad-desktop2 kernel: [   44.099693] usbcore: registered new device driver usb
Jul 23 14:02:39 dad-desktop2 kernel: [   44.101447] USB Universal Host Controller Interface driver v3.0
Jul 23 14:02:39 dad-desktop2 kernel: [   44.101600] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 23 14:02:39 dad-desktop2 kernel: [   44.101733] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jul 23 14:02:39 dad-desktop2 kernel: [   44.101737] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jul 23 14:02:39 dad-desktop2 kernel: [   44.101989] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jul 23 14:02:39 dad-desktop2 kernel: [   44.102087] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440
Jul 23 14:02:39 dad-desktop2 kernel: [   44.102286] usb usb1: configuration #1 chosen from 1 choice
Jul 23 14:02:39 dad-desktop2 kernel: [   44.102374] hub 1-0:1.0: USB hub found
Jul 23 14:02:39 dad-desktop2 kernel: [   44.102442] hub 1-0:1.0: 2 ports detected
Jul 23 14:02:39 dad-desktop2 kernel: [   44.206613] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
Jul 23 14:02:39 dad-desktop2 kernel: [   44.206742] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jul 23 14:02:39 dad-desktop2 kernel: [   44.206746] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jul 23 14:02:39 dad-desktop2 kernel: [   44.206967] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jul 23 14:02:39 dad-desktop2 kernel: [   44.207066] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002460
Jul 23 14:02:39 dad-desktop2 kernel: [   44.207508] usb usb2: configuration #1 chosen from 1 choice
Jul 23 14:02:39 dad-desktop2 kernel: [   44.207717] hub 2-0:1.0: USB hub found
Jul 23 14:02:39 dad-desktop2 kernel: [   44.207783] hub 2-0:1.0: 2 ports detected
Jul 23 14:02:39 dad-desktop2 kernel: [   44.213141] SCSI subsystem initialized
Jul 23 14:02:39 dad-desktop2 kernel: [   44.234297] Floppy drive(s): fd0 is 1.44M
Jul 23 14:02:39 dad-desktop2 kernel: [   44.242334] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jul 23 14:02:39 dad-desktop2 kernel: [   44.242399] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 23 14:02:39 dad-desktop2 kernel: [   44.250582] FDC 0 is a post-1991 82077
Jul 23 14:02:39 dad-desktop2 kernel: [   44.308627] ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 19 (level, low) -> IRQ 17
Jul 23 14:02:39 dad-desktop2 kernel: [   44.309459] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
Jul 23 14:02:39 dad-desktop2 kernel: [   44.309585] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jul 23 14:02:39 dad-desktop2 kernel: [   44.309589] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jul 23 14:02:39 dad-desktop2 kernel: [   44.309889] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
Jul 23 14:02:39 dad-desktop2 kernel: [   44.310000] ehci_hcd 0000:00:1d.7: debug port 1
Jul 23 14:02:39 dad-desktop2 kernel: [   44.310060] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Jul 23 14:02:39 dad-desktop2 kernel: [   44.310072] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xf0500000
Jul 23 14:02:39 dad-desktop2 kernel: [   44.314002] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 23 14:02:39 dad-desktop2 kernel: [   44.314465] usb usb3: configuration #1 chosen from 1 choice
Jul 23 14:02:39 dad-desktop2 kernel: [   44.314692] hub 3-0:1.0: USB hub found
Jul 23 14:02:39 dad-desktop2 kernel: [   44.314771] hub 3-0:1.0: 6 ports detected
Jul 23 14:02:39 dad-desktop2 kernel: [   59.491751] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
Jul 23 14:02:39 dad-desktop2 kernel: [   59.491753]         <Adaptec AIC7902 Ultra320 SCSI adapter>
Jul 23 14:02:39 dad-desktop2 kernel: [   59.491754]         aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
Jul 23 14:02:39 dad-desktop2 kernel: [   59.492209] ACPI: PCI Interrupt 0000:05:0c.1[B] -> GSI 22 (level, low) -> IRQ 19
Jul 23 14:02:39 dad-desktop2 kernel: [   59.496328] scsi 0:0:0:0: Direct-Access     SEAGATE  ST336607LW       HPS4 PQ: 0 ANSI: 3
Jul 23 14:02:39 dad-desktop2 kernel: [   59.496431]  target0:0:0: asynchronous
Jul 23 14:02:39 dad-desktop2 kernel: [   59.496505] scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
Jul 23 14:02:39 dad-desktop2 kernel: [   59.496650]  target0:0:0: Beginning Domain Validation
Jul 23 14:02:39 dad-desktop2 kernel: [   59.499829]  target0:0:0: wide asynchronous
Jul 23 14:02:39 dad-desktop2 kernel: [   59.502235]  target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM WRFLOW PCOMP (6.25 ns, offset 63)
Jul 23 14:02:39 dad-desktop2 kernel: [   59.720256]  target0:0:0: Ending Domain Validation
Jul 23 14:02:39 dad-desktop2 kernel: [   74.675210] scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
Jul 23 14:02:39 dad-desktop2 kernel: [   74.675213]         <Adaptec AIC7902 Ultra320 SCSI adapter>
Jul 23 14:02:39 dad-desktop2 kernel: [   74.675214]         aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
Jul 23 14:02:39 dad-desktop2 kernel: [   74.679220] ICH4: IDE controller at PCI slot 0000:00:1f.1
Jul 23 14:02:39 dad-desktop2 kernel: [   74.679293] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Jul 23 14:02:39 dad-desktop2 kernel: [   74.679367] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
Jul 23 14:02:39 dad-desktop2 kernel: [   74.679488] ICH4: chipset revision 1
Jul 23 14:02:39 dad-desktop2 kernel: [   74.679546] ICH4: not 100%% native mode: will probe irqs later
Jul 23 14:02:39 dad-desktop2 kernel: [   74.679616]     ide1: BM-DMA at 0x24a8-0x24af, BIOS settings: hdc:DMA, hdd:pio
Jul 23 14:02:39 dad-desktop2 kernel: [   74.679781] Probing IDE interface ide1...
Jul 23 14:02:39 dad-desktop2 kernel: [   74.707969] sd 0:0:0:0: [sda] 71132960 512-byte hardware sectors (36420 MB)
Jul 23 14:02:39 dad-desktop2 kernel: [   74.709103] sd 0:0:0:0: [sda] Write Protect is off
Jul 23 14:02:39 dad-desktop2 kernel: [   74.709160] sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08
Jul 23 14:02:39 dad-desktop2 kernel: [   74.710411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
Jul 23 14:02:39 dad-desktop2 kernel: [   74.710979] sd 0:0:0:0: [sda] 71132960 512-byte hardware sectors (36420 MB)
Jul 23 14:02:39 dad-desktop2 kernel: [   74.712082] sd 0:0:0:0: [sda] Write Protect is off
Jul 23 14:02:39 dad-desktop2 kernel: [   74.712137] sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08
Jul 23 14:02:39 dad-desktop2 kernel: [   74.713385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
Jul 23 14:02:39 dad-desktop2 kernel: [   74.713456]  sda: sda1 sda2 sda3 < sda5 >
Jul 23 14:02:39 dad-desktop2 kernel: [   74.734854] sd 0:0:0:0: [sda] Attached SCSI disk
Jul 23 14:02:39 dad-desktop2 kernel: [   74.739700] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jul 23 14:02:39 dad-desktop2 kernel: [   74.854684] hdc: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
Jul 23 14:02:39 dad-desktop2 kernel: [   75.022223] hdc: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
Jul 23 14:02:39 dad-desktop2 kernel: [   75.033686] Attempting manual resume
Jul 23 14:02:39 dad-desktop2 kernel: [   75.033743] swsusp: Resume From Partition 8:5
Jul 23 14:02:39 dad-desktop2 kernel: [   75.033744] PM: Checking swsusp image.
Jul 23 14:02:39 dad-desktop2 kernel: [   75.033943] PM: Resume from disk failed.
Jul 23 14:02:39 dad-desktop2 kernel: [   75.072691] kjournald starting.  Commit interval 5 seconds
Jul 23 14:02:39 dad-desktop2 kernel: [   75.072702] EXT3-fs: mounted filesystem with ordered data mode.
Jul 23 14:02:39 dad-desktop2 kernel: [   75.301368] hdc: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
Jul 23 14:02:39 dad-desktop2 kernel: [   75.413193] hdc: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive
Jul 23 14:02:39 dad-desktop2 kernel: [   75.752045] hdd: probing with STATUS(0x01) instead of ALTSTATUS(0x7f)
Jul 23 14:02:39 dad-desktop2 kernel: [   75.919554] hdd: probing with STATUS(0x01) instead of ALTSTATUS(0x7f)
Jul 23 14:02:39 dad-desktop2 kernel: [   76.087165] hdc: drive side 80-wire cable detection failed, limiting max speed to UDMA33
Jul 23 14:02:39 dad-desktop2 kernel: [   76.087237] hdc: selected mode 0x42
Jul 23 14:02:39 dad-desktop2 kernel: [   76.087448] ide1 at 0x170-0x177,0x376 on irq 15
Jul 23 14:02:39 dad-desktop2 kernel: [   76.087814] tg3.c:v3.77 (May 31, 2007)
Jul 23 14:02:39 dad-desktop2 kernel: [   76.087892] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 21 (level, low) -> IRQ 21
Jul 23 14:02:39 dad-desktop2 kernel: [   76.127191] eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0b:cd:d5:ae:60
Jul 23 14:02:39 dad-desktop2 kernel: [   76.127500] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Jul 23 14:02:39 dad-desktop2 kernel: [   76.127567] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
Jul 23 14:02:39 dad-desktop2 kernel: [   80.122653] PM: Writing back config space on device 0000:05:02.0 at offset b (was 164714e4, writing cc103c)
Jul 23 14:02:39 dad-desktop2 kernel: [   80.122671] PM: Writing back config space on device 0000:05:02.0 at offset 3 (was 0, writing 4010)
Jul 23 14:02:39 dad-desktop2 kernel: [   80.122677] PM: Writing back config space on device 0000:05:02.0 at offset 2 (was 2000000, writing 2000002)
Jul 23 14:02:39 dad-desktop2 kernel: [   80.122683] PM: Writing back config space on device 0000:05:02.0 at offset 1 (was 2b00000, writing 2b00106)
Jul 23 14:02:39 dad-desktop2 kernel: [   80.122689] PM: Writing back config space on device 0000:05:02.0 at offset 0 (was 164714e4, writing 16a614e4)
Jul 23 14:02:39 dad-desktop2 kernel: [   81.313230] EDAC MC: Ver: 2.0.1 Jul 19 2007
Jul 23 14:02:39 dad-desktop2 kernel: [   81.379774] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 23 14:02:39 dad-desktop2 kernel: [   81.417757] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 23 14:02:39 dad-desktop2 kernel: [   81.424889] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
Jul 23 14:02:39 dad-desktop2 kernel: [   81.424892]  don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
Jul 23 14:02:39 dad-desktop2 kernel: [   81.424893]  you are certain that your <4>intel_rng: system has a functional
Jul 23 14:02:39 dad-desktop2 kernel: [   81.424895]  RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
Jul 23 14:02:39 dad-desktop2 kernel: [   81.435649] EDAC e7xxx: error reporting device not found:vendor 8086 device 0x2551 (broken BIOS?)
Jul 23 14:02:39 dad-desktop2 kernel: [   81.543753] parport_pc 00:07: reported by Plug and Play ACPI
Jul 23 14:02:39 dad-desktop2 kernel: [   81.543863] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Jul 23 14:02:39 dad-desktop2 kernel: [   81.582563] input: PC Speaker as /class/input/input2
Jul 23 14:02:39 dad-desktop2 kernel: [   81.595506] Linux agpgart interface v0.102 (c) Dave Jones
Jul 23 14:02:39 dad-desktop2 kernel: [   81.602633] agpgart: Detected an Intel E7505 Chipset.
Jul 23 14:02:39 dad-desktop2 kernel: [   81.605998] agpgart: AGP aperture is 64M @ 0xf4000000
Jul 23 14:02:39 dad-desktop2 kernel: [   81.619680] NET: Registered protocol family 17
Jul 23 14:02:39 dad-desktop2 kernel: [   81.640882] iTCO_vendor_support: vendor-support=0
Jul 23 14:02:39 dad-desktop2 kernel: [   81.650221] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
Jul 23 14:02:39 dad-desktop2 kernel: [   81.650375] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xf860)
Jul 23 14:02:39 dad-desktop2 kernel: [   81.650481] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jul 23 14:02:39 dad-desktop2 kernel: [   81.701032] hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jul 23 14:02:39 dad-desktop2 kernel: [   81.701405] Uniform CD-ROM driver Revision: 3.20
Jul 23 14:02:39 dad-desktop2 kernel: [   81.885411] tg3: eth0: Link is up at 100 Mbps, full duplex.
Jul 23 14:02:39 dad-desktop2 kernel: [   81.885471] tg3: eth0: Flow control is on for TX and on for RX.
Jul 23 14:02:39 dad-desktop2 kernel: [   82.142131] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22
Jul 23 14:02:39 dad-desktop2 kernel: [   82.142279] PCI: Setting latency timer of device 0000:00:1f.5 to 64
Jul 23 14:02:39 dad-desktop2 kernel: [   82.335167] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
Jul 23 14:02:39 dad-desktop2 kernel: [   82.512211] intel8x0_measure_ac97_clock: measured 55011 usecs
Jul 23 14:02:39 dad-desktop2 kernel: [   82.512272] intel8x0: clocking to 48000
Jul 23 14:02:39 dad-desktop2 kernel: [   83.079152] lp0: using parport0 (interrupt-driven).
Jul 23 14:02:39 dad-desktop2 kernel: [   83.126227] Adding 1220900k swap on /dev/disk/by-uuid/23e2caef-8a12-415e-a993-c04e763b68e2.  Priority:-1 extents:1 across:1220900k
Jul 23 14:02:39 dad-desktop2 kernel: [   83.390785] EXT3 FS on sda2, internal journal
Jul 23 14:02:39 dad-desktop2 kernel: [   83.656821] NTFS driver 2.1.28 [Flags: R/O MODULE].
Jul 23 14:02:39 dad-desktop2 kernel: [   83.715605] NTFS volume version 3.1.
Jul 23 14:02:39 dad-desktop2 kernel: [   85.223086] NET: Registered protocol family 10
Jul 23 14:02:39 dad-desktop2 kernel: [   85.223183] lo: Disabled Privacy Extensions
Jul 23 14:02:39 dad-desktop2 kernel: [   95.713480] eth0: no IPv6 routers present
Jul 23 14:02:39 dad-desktop2 kernel: [  137.240917] No dock devices found.
Jul 23 14:02:39 dad-desktop2 kernel: [  137.254037] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
Jul 23 14:02:39 dad-desktop2 kernel: [  137.331926] input: Power Button (FF) as /class/input/input4
Jul 23 14:02:39 dad-desktop2 kernel: [  137.331951] ACPI: Power Button (FF) [PWRF]
Jul 23 14:02:39 dad-desktop2 kernel: [  137.332048] input: Power Button (CM) as /class/input/input5
Jul 23 14:02:39 dad-desktop2 kernel: [  137.332069] ACPI: Power Button (CM) [PBTN]
Jul 23 14:02:41 dad-desktop2 kernel: [  139.792311] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Jul 23 14:02:41 dad-desktop2 kernel: [  139.792316] apm: disabled - APM is not SMP safe.
Jul 23 14:02:41 dad-desktop2 kernel: [  140.070389] Capability LSM initialized
Jul 23 14:02:42 dad-desktop2 kernel: [  141.140807] Bluetooth: Core ver 2.11
Jul 23 14:02:42 dad-desktop2 kernel: [  141.140897] NET: Registered protocol family 31
Jul 23 14:02:42 dad-desktop2 kernel: [  141.140900] Bluetooth: HCI device and connection manager initialized
Jul 23 14:02:42 dad-desktop2 kernel: [  141.140904] Bluetooth: HCI socket layer initialized
Jul 23 14:02:42 dad-desktop2 kernel: [  141.156983] Bluetooth: L2CAP ver 2.8
Jul 23 14:02:42 dad-desktop2 kernel: [  141.156991] Bluetooth: L2CAP socket layer initialized
Jul 23 14:02:42 dad-desktop2 kernel: [  141.223247] Bluetooth: RFCOMM socket layer initialized
Jul 23 14:02:42 dad-desktop2 kernel: [  141.223273] Bluetooth: RFCOMM TTY layer initialized
Jul 23 14:02:42 dad-desktop2 kernel: [  141.223276] Bluetooth: RFCOMM ver 1.8

Comment 12 Tejun Heo 2007-07-23 22:55:53 UTC

[cc'ing Alan]

Hmmm... Apparently the Seagate drive has some problem with its TF altstatus register and IDE is working around it by using the status register during probe.  It seems we'll need to add similar work around in libata too.  In the posted log, there's no ata2.xx configuration messages.  Please execute 'dmesg > dmesg.log' after boot and attach the file here (please don't post inline, it's hard to read due to line wrapping).

Comment 13 Edward Amsden 2007-07-24 08:05:01 UTC

Created attachment 12120 [details]
ata_piix dmesg.log

this is the dmesg.log from the ata_piix kernel

Comment 14 Edward Amsden 2007-07-24 08:07:41 UTC

the seagate is the HD, and is attached via SCSI. This HD works...
The IDE CDROM is what is not working, see comment #6

Comment 15 Andrew 2007-07-24 20:51:39 UTC

After much Googling, I could not find the code that prints "port disabled.  ignoring."; however, I have worked with ATA drivers on other projects that completely disable if the primary controller is disabled.  Is this code the same?

Also, I didn't see you comment where the CD drive in question is connected to.  Is it ata1 or ata2?  If you plug it into ata1, does it work?

Comment 16 Edward Amsden 2007-07-25 05:59:51 UTC

it is on ata2. ata1 had no drives on it and was disabled in the bios. I enabled it, but the problem persists. I will try plugging the CDROM into ata1.

Comment 17 Edward Amsden 2007-07-25 06:13:04 UTC

I plugged the cdrom into ata1, it is now enabled as it was in comment #16, but still not detected by the kernel.

Comment 18 Tejun Heo 2007-07-30 01:25:03 UTC

Created attachment 12197 [details]
bug8784-debug.patch

Please apply the attached patch on top of 2.6.22.1 and report boot log.  Thanks.

Comment 19 Persio Barros 2007-07-31 17:47:04 UTC

Created attachment 12217 [details]
dmesg output with proposed patch applied

Comment 20 Persio Barros 2007-07-31 17:48:56 UTC

Hi,

I think I have the same problem here. Installed Gutsy on a Lenovo 3000 V200 notebook, which has a sata HD and an ide CD/DVD RW. After install the CD drive is not found at boot. I can enable it with "modprobe ide-generic", but then I can't set DMA to it. 
The IDE controller is from Intel but a different model. From lspci:

00:1f.1 IDE interface [0101]: Intel Corporation Mobile IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Lenovo Unknown device [17aa:3c2b]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 255
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 1810 [size=16]
00: 86 80 50 28 05 00 80 02 03 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 11 18 00 00 00 00 00 00 00 00 00 00 aa 17 2b 3c
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00

Also, I noted that with kernel 2.6.19 in Knoppix, the DVD drive is recognized without problem.

I tried the proposed patch to libata, but the result is the same. The problem is still here. But I am not sure that I did it correctly, since I'm no kernel guru. Basically I followed the directions in http://www.howtoforge.com/kernel_compilation_ubuntu_p2 .
I downloaded the kernel sources, then applied the patch, used the Ubuntu .config, compiled and installed the modified kernel. The boot log is attached. 

Hope this helps.

Comment 21 Tejun Heo 2007-08-01 03:16:46 UTC

Persio, your problem is different.  Try 'modprobe ata_piix'.

Comment 22 Persio Barros 2007-08-01 06:56:25 UTC

Nope. It didn't work. Neither with the original Gutsy kernel (upgraded today: 2.6.22-9), nor with the modified libata kernel. Also noted that the ata_piix module loading (and unloading) is not reported in the system logs.
Any ideas? Should I fill a new bug report?
Thanks,
Persio

Comment 23 Tejun Heo 2007-08-01 07:09:05 UTC

Yes, please open a separate bug report and assign it to me.  In the new bug report, please attach the result of 'lpsci -nnvvv', 'dmesg' and 'cat /proc/ioports'.

Comment 24 Edward Amsden 2007-08-01 14:10:31 UTC

Created attachment 12230 [details]
dmesg log from 2.6.22.1 kernel with ata debug patch applied

This is the log with the patch applied. The CDROM is still not detected... don't know if the patch was actually an attempt to fix it or just to get more information, but here is the log

Comment 25 Tejun Heo 2007-08-01 23:17:02 UTC

Created attachment 12231 [details]
ata_piix-force-classes.patch

The patch just adds several diagnostic messages so that I can tell what's going on.  Let's see.

Ummm... devmask is 0x0 indicating writing a value to a TF regsiter and reading it back didn't return the written value.  ie. There doesn't seem to be any device attached to the channel.

Can you please apply the attached patch and report the result?

Comment 26 Edward Amsden 2007-08-03 12:59:11 UTC

Created attachment 12240 [details]
log from kernel with ata debug and ata forceclass patches applied

This is the dmesg. The CD is still not detected...

Comment 27 Tejun Heo 2007-08-03 23:17:59 UTC

Persio, your problem is probably the following bug.

  http://bugzilla.kernel.org/show_bug.cgi?id=8809

Please try patch attached there.

Edward, can you try Bartlomiej's suggestion?  Disable libata and try IDE piix driver and see whether that works.

Thanks.

Comment 28 Edward Amsden 2007-08-04 06:56:46 UTC

I have already tried that. It does work. The CDROM appears as hdc with the ide_piix module.

Comment 29 Tejun Heo 2007-08-06 01:33:28 UTC

Edward, please post the boot log and the result of 'hdparm -I /dev/hdc' with the ide driver.

Comment 30 Edward Amsden 2007-08-06 05:53:34 UTC

Created attachment 12271 [details]
log from kernel with ata debug and ata forceclass patches applied

ok... my mistake...
I had the IDE for the CD bus disabled in the BIOS, I forgot that i had moved the cd to channel 1.
So...
2.6.22 vanilla: still does not detect cdrom
2.6.22-idepiix: /dev/hda
2.6.22 with forceclass patch: /dev/scd0

posting bootlog from forceclass patched kernel

Comment 31 Edward Amsden 2007-08-06 05:57:49 UTC

Created attachment 12272 [details]
dmesg from ide piix kernel. ide cdrom at /dev/hda

Comment 32 Edward Amsden 2007-08-06 06:02:57 UTC

Created attachment 12273 [details]
log from vanilla 2.6.22 kernel, cdrom not detected

Comment 33 Tejun Heo 2007-08-06 07:02:45 UTC

Created attachment 12274 [details]
assume-ATA-on-failed-diagnostic.patch

Please apply the attached patch on top of clean 2.6.22.1 and report the result.  Thanks.

Comment 34 Alan 2007-08-06 08:48:52 UTC

That would be a nice change to get in anyway Tejun as it'll make pre-ATA devices (ST412) work except for needing identify sorting [and we can figure out later if its ATA or ATAPI from ID_ATA v ID_ATAPI)

Comment 35 Tejun Heo 2007-08-06 09:18:32 UTC

libata already does fallback onto the other IDENTIFY on device error.  Would that be enough for the oldies?

Comment 36 Edward Amsden 2007-08-06 12:08:27 UTC

Created attachment 12280 [details]
DMESG from kernel with ata fallback patch

dmesg attached

cdrom is not detected

Comment 37 Alan 2007-08-06 12:42:00 UTC

identify as ATA failure followed by identify as ATAPI attempt will sort out early CD-ROM devices correctly. It won't sort out early ATA devices and pre-ATA devices where IDENTIFY is optional and may not be present at all.

Nothing to do with the traces here though - they look very broken hardware wise indeed even with old IDE.

Comment 38 Tejun Heo 2007-08-07 01:13:08 UTC

Created attachment 12290 [details]
assume-ATA-on-failed-diagnostic-take2.patch

Hmmm... What did I miss?

Please try this one and report boot log.  Thanks.

Comment 39 Edward Amsden 2007-08-07 08:09:15 UTC

Created attachment 12296 [details]
DMESG from successful ata fallback patch. CDROM detected

CDROM detected as /dev/scd0. correctly detected as cdrw/dvdrom. Thanks so much tejun. this is the dmesg log

Comment 40 Tejun Heo 2007-08-07 22:25:36 UTC

Alright, forwarding patch upstream.  Thanks.

Comment 41 Edward Amsden 2007-08-08 06:15:17 UTC

Thank you Tejun.

Note You need to log in before you can comment on or make changes to this bug.