Hi all, 

my TV tuner Hauppauge normally works on wheezy's stable kernel 3.2.63 but on 3.17.2 is some strange problem, i'm unable to identify the difference, 

outputs on 3.2.63 when it's running correctly: 

kernel: 
[   65.728570] usb 2-1.3: new high-speed USB device number 6 using ehci_hcd
[   65.826435] usb 2-1.3: New USB device found, idVendor=2040, idProduct=6500
[   65.826442] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[   65.826446] usb 2-1.3: Product: WinTV HVR-900
[   65.826449] usb 2-1.3: SerialNumber: 4026875858
[   65.939542] IR NEC protocol handler initialized
[   65.952513] IR RC5(x) protocol handler initialized
[   65.997360] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6500, interface 0, class 0)
[   65.997571] em28xx #0: chip ID is em2882/em2883
[   66.009094] IR RC6 protocol handler initialized
[   66.010442] IR JVC protocol handler initialized
[   66.011752] IR Sony protocol handler initialized
[   66.014106] IR MCE Keyboard/mouse protocol handler initialized
[   66.016068] lirc_dev: IR Remote Control driver registered, major 250 
[   66.028445] IR LIRC bridge handler initialized
[   66.173169] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 00 65 50 12 5c 03 82 1e 6a 18
[   66.173184] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 00 00 60 00 00 00 02 00 00 00
[   66.173197] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 00 00 00
[   66.173209] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00
[   66.173222] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   66.173233] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   66.173245] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
[   66.173257] em28xx #0: i2c eeprom 70: 32 00 36 00 38 00 37 00 35 00 38 00 35 00 38 00
[   66.173270] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
[   66.173282] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00
[   66.173294] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 f0 fd d0 18 85
[   66.173306] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 d2 3f
[   66.173318] em28xx #0: i2c eeprom c0: 05 f0 74 02 01 00 01 79 52 00 00 00 00 00 00 00
[   66.173331] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 f0 fd d0 18 85
[   66.173343] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 d2 3f
[   66.173355] em28xx #0: i2c eeprom f0: 05 f0 74 02 01 00 01 79 52 00 00 00 00 00 00 00
[   66.173369] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x43a734dd
[   66.173372] em28xx #0: EEPROM info:
[   66.173374] em28xx #0:	AC97 audio (5 sample rates)
[   66.173377] em28xx #0:	500mA max power
[   66.173380] em28xx #0:	Table at 0x24, strings=0x1e82, 0x186a, 0x0000
[   66.174895] em28xx #0: Identified as Hauppauge WinTV HVR 900 (card=10)
[   66.176747] tveeprom 10-0050: Hauppauge model 65008, rev A1C0, serial# 344018
[   66.176753] tveeprom 10-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[   66.176759] tveeprom 10-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[   66.176763] tveeprom 10-0050: audio processor is None (idx 0)
[   66.176767] tveeprom 10-0050: has radio
[   66.182809] tvp5150 10-005c: chip found @ 0xb8 (em28xx #0)
[   66.244214] tvp5150 10-005c: tvp5150am1 detected.
[   66.259200] i2c-core: driver [tuner] using legacy suspend method
[   66.259204] i2c-core: driver [tuner] using legacy resume method
[   66.264800] tuner 10-0061: Tuner -1 found with type(s) Radio TV.
[   66.292445] xc2028 10-0061: creating new instance
[   66.292452] xc2028 10-0061: type set to XCeive xc2028/xc3028 tuner
[   66.312004] usb 2-1.3: firmware: agent loaded xc3028-v27.fw into memory
[   66.312014] xc2028 10-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   66.359326] xc2028 10-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[   67.527808] xc2028 10-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[   67.548394] xc2028 10-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[   67.720954] Registered IR keymap rc-hauppauge
[   67.721130] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0/input21
[   67.721329] rc0: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0
[   67.721703] em28xx #0: Config register raw data: 0x50
[   67.722456] em28xx #0: AC97 vendor ID = 0xffffffff
[   67.722831] em28xx #0: AC97 features = 0x6a90
[   67.722835] em28xx #0: Empia 202 AC97 audio processor detected
[   67.934038] em28xx #0: v4l2 driver version 0.1.3
[   67.980503] xc2028 10-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.

mplayer:  cmd: mplayer tv:// -tv norm=PAL-BG:freq=687.5:input=0:device=/dev/video1:alsa:amode=1:adevice=hw.2,0:audiorate=48000:forceaudio:immediatemode=0 -hardframedrop -ao alsa

output: 
MPlayer svn r34540 (Debian), built with gcc-4.7 (C) 2000-2012 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing tv://.
TV file format detected.
Selected driver: v4l2
 name: Video 4 Linux 2 input
 author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
 comment: first try, more to come ;-)
Selected device: Hauppauge WinTV HVR 900
 Tuner cap:
 Tuner rxs:
 Capabilities:  video capture  VBI capture device  tuner  audio  read/write  streaming
 supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc;
 inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
 Current input: 0
 Current format: YUYV
v4l2: current audio mode is : STEREO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
Movie-Aspect is undefined - no prescaling applied.
VO: [vdpau] 640x480 => 640x480 Packed YUY2 
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
==========================================================================
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
A:   7.5 V:   7.5 A-V:  0.000 ct:  0.250 187/187  0%  9%  0.0% 0 0 
v4l2: 267 frames successfully processed, 0 frames dropped.


and outputs when it's not running: 
kernel:
[   54.948450] usb 2-1.3: new high-speed USB device number 6 using ehci-pci
[   55.046419] usb 2-1.3: New USB device found, idVendor=2040, idProduct=6500
[   55.046426] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[   55.046431] usb 2-1.3: Product: WinTV HVR-900
[   55.046435] usb 2-1.3: SerialNumber: 4026875858
[   55.169609] em28xx: New device  WinTV HVR-900 @ 480 Mbps (2040:6500, interface 0, class 0)
[   55.169613] em28xx: Video interface 0 found: isoc
[   55.169614] em28xx: DVB interface 0 found: isoc
[   55.169745] em28xx: chip ID is em2882/3
[   55.340827] em2882/3 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0x43a734dd
[   55.340832] em2882/3 #0: EEPROM info:
[   55.340835] em2882/3 #0: 	AC97 audio (5 sample rates)
[   55.340837] em2882/3 #0: 	500mA max power
[   55.340840] em2882/3 #0: 	Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000
[   55.340844] em2882/3 #0: Identified as Hauppauge WinTV HVR 900 (card=10)
[   55.342835] tveeprom 10-0050: Hauppauge model 65008, rev A1C0, serial# 344018
[   55.342841] tveeprom 10-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[   55.342847] tveeprom 10-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[   55.342851] tveeprom 10-0050: audio processor is None (idx 0)
[   55.342854] tveeprom 10-0050: has radio
[   55.342858] em2882/3 #0: analog set to isoc mode.
[   55.342860] em2882/3 #0: dvb set to isoc mode.
[   55.342889] em28xx audio device (2040:6500): interface 1, class 1
[   55.342907] em28xx audio device (2040:6500): interface 2, class 1
[   55.342953] usbcore: registered new interface driver em28xx
[   55.371200] em2882/3 #0: Registering V4L2 extension
[   55.402851] tvp5150 10-005c: chip found @ 0xb8 (em2882/3 #0)
[   55.402856] tvp5150 10-005c: tvp5150am1 detected.
[   55.424975] tuner 10-0061: Tuner -1 found with type(s) Radio TV.
[   55.479020] xc2028 10-0061: creating new instance
[   55.479023] xc2028 10-0061: type set to XCeive xc2028/xc3028 tuner
[   55.505653] xc2028 10-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   55.580177] usbcore: registered new interface driver snd-usb-audio
[   55.648495] xc2028 10-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[   56.819291] MTS (4), id 00000000000000ff:
[   56.819300] xc2028 10-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[   56.970310] em2882/3 #0: V4L2 video device registered as video1
[   56.970315] em2882/3 #0: V4L2 VBI device registered as vbi0
[   56.971132] em2882/3 #0: V4L2 extension successfully initialized
[   56.971138] em28xx: Registered (Em28xx v4l2 Extension) extension
[   57.024430] em2882/3 #0: Binding DVB extension
[   57.202512] xc2028 10-0061: attaching existing instance
[   57.202519] xc2028 10-0061: type set to XCeive xc2028/xc3028 tuner
[   57.202523] em2882/3 #0: em2882/3 #0/2: xc3028 attached
[   57.202527] DVB: registering new adapter (em2882/3 #0)
[   57.202536] usb 2-1.3: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[   57.203224] em2882/3 #0: DVB extension successfully initialized
[   57.203230] em28xx: Registered (Em28xx dvb Extension) extension
[   57.224602] em2882/3 #0: Registering input extension
[   57.257295] Registered IR keymap rc-hauppauge
[   57.257568] input: em28xx IR (em2882/3 #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0/input22
[   57.257729] rc0: em28xx IR (em2882/3 #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0
[   57.258108] em2882/3 #0: Input extension successfully initalized
[   57.258114] em28xx: Registered (Em28xx Input Extension) extension


mplayer: 
mplayer tv:// -tv norm=PAL-BG:freq=687.5:input=0:device=/dev/video1:alsa:amode=1:adevice=hw.2,0:audiorate=48000:forceaudio:immediatemode=0 -hardframedrop -ao alsa 
MPlayer svn r34540 (Debian), built with gcc-4.7 (C) 2000-2012 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing tv://.
TV file format detected.
Selected driver: v4l2
 name: Video 4 Linux 2 input
 author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
 comment: first try, more to come ;-)
Selected device: Hauppauge WinTV HVR 900
 Tuner cap:
 Tuner rxs:
 Capabilities:  video capture  VBI capture device  tuner  read/write  streaming
 supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc;
 inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
 Current input: 0
 Current format: YUYV
v4l2: current audio mode is : STEREO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set mute failed: Invalid argument
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
Movie-Aspect is undefined - no prescaling applied.
VO: [vdpau] 720x576 => 720x576 Packed YUY2 
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
==========================================================================
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
A:   4.4 V:   3.1 A-V:  1.284 ct:  0.250 188/188  0% 17%  0.1% 50 0 


           ************************************************
           **** Your system is too SLOW to play this!  ****
           ************************************************

Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
  - Try -ao sdl or use the OSS emulation of ALSA.
  - Experiment with different values for -autosync, 30 is a good start.
- Slow video output
  - Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
  - Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
    e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
  - Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
  - Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
  - Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.

A:  14.7 V:   7.2 A-V:  7.447 ct:  0.250 445/445  0%  7%  0.1% 307 0 
v4l2: ioctl set mute failed: Invalid argument
v4l2: 447 frames successfully processed, 0 frames dropped.

Exiting... (Quit)


please help me ...

Thanks for all replies