Most recent kernel where this bug did not occur: N.A. Distribution: Debian Hardware Environment: IBM Laptop T42 Software Environment: Linux Problem Description: 3G USB HUAWEI E220 gsm modem not detected/working correctly Device: USB 3G size of a egg, cream with vodafone logo on the front, on windows scsi-cd with drivers on is also detected but ignored by linux, + 3 x USB serial ports, 1-Data 2-Mon 3-Diag Steps to reproduce: Insert USB modem into usb port, and watch syslog. only one device created /dev/ttyUSB0 When i try and use it it disconnects. # lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 005: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 003 Device 001: ID 0000:0000 Bus 002 Device 007: ID 12d1:1003 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 011: ID 04b3:310b IBM Corp. Red Wheel Mouse Bus 001 Device 010: ID 04b3:301b IBM Corp. Bus 001 Device 009: ID 04b3:301a IBM Corp. Bus 001 Device 001: ID 0000:0000 ###Device is:: Bus 002 Device 007: ID 12d1:1003 # cat /proc/bus/usb/devices ##((only 2 section i though is relevant)) T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.22.1-pesg uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1003 Rev= 0.00 S: Manufacturer=HUAWEI Technologies S: Product=HUAWEI Mobile C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From Syslog: ####Insert usb Jul 13 14:49:42 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 13 Jul 13 14:49:42 dieskim kernel: usb 2-2: configuration #1 chosen from 1 choice Jul 13 14:49:42 dieskim kernel: usb-storage: USB Mass Storage device detected Jul 13 14:49:42 dieskim kernel: usb-storage: -- associate_dev Jul 13 14:49:42 dieskim kernel: usb-storage: Vendor: 0x12d1, Product: 0x1003, Revision: 0x0000 Jul 13 14:49:42 dieskim kernel: usb-storage: Interface Subclass: 0x06, Protocol: 0x50 Jul 13 14:49:42 dieskim kernel: usb-storage: device ignored Jul 13 14:49:42 dieskim kernel: usb-storage: storage_probe() failed Jul 13 14:49:42 dieskim kernel: usb-storage: -- usb_stor_release_resources Jul 13 14:49:42 dieskim kernel: usb-storage: -- sending exit command to thread Jul 13 14:49:42 dieskim kernel: usb-storage: -- dissociate_dev Jul 13 14:49:42 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter detected Jul 13 14:49:42 dieskim kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0 Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.435021] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.487276] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.493958] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). ####Try and dial using ppp #This kills the interface, and then it is re-detected Jul 13 14:51:08 dieskim chat[32546]: send (ATZ^M) Jul 13 14:51:08 dieskim chat[32546]: expect (OK) Jul 13 14:51:08 dieskim kernel: usb 2-2: USB disconnect, address 13 Jul 13 14:51:08 dieskim kernel: option 2-2:1.0: device disconnected Jul 13 14:51:08 dieskim chat[32546]: warning: read() on stdin returned 0 Jul 13 14:51:08 dieskim chat[32546]: Failed Jul 13 14:51:08 dieskim chat[32546]: Can't restore terminal parameters: Input/output error Jul 13 14:51:09 dieskim pppd[32545]: Connect script failed Jul 13 14:51:09 dieskim NetworkManager: <debug info>^I[1184331069.070690] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). Jul 13 14:51:09 dieskim NetworkManager: <debug info>^I[1184331069.072806] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). Jul 13 14:51:10 dieskim pppd[32545]: Hangup (SIGHUP) Jul 13 14:51:10 dieskim pppd[32545]: Failed to open /dev/ttyUSB0: No such device Jul 13 14:51:10 dieskim kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 Jul 13 14:51:10 dieskim NetworkManager: <debug info>^I[1184331070.071384] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). Jul 13 14:51:14 dieskim pppd[32545]: Terminating on signal 15 Jul 13 14:51:14 dieskim pppd[32545]: Exit. Jul 13 14:51:25 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 14 Jul 13 14:51:25 dieskim kernel: usb 2-2: configuration #1 chosen from 1 choice Jul 13 14:51:25 dieskim kernel: usb-storage: USB Mass Storage device detected Jul 13 14:51:25 dieskim kernel: usb-storage: -- associate_dev Jul 13 14:51:25 dieskim kernel: usb-storage: Vendor: 0x12d1, Product: 0x1003, Revision: 0x0000 Jul 13 14:51:25 dieskim kernel: usb-storage: Interface Subclass: 0x06, Protocol: 0x50 Jul 13 14:51:25 dieskim kernel: usb-storage: device ignored Jul 13 14:51:25 dieskim kernel: usb-storage: storage_probe() failed Jul 13 14:51:25 dieskim kernel: usb-storage: -- usb_stor_release_resources Jul 13 14:51:25 dieskim kernel: usb-storage: -- sending exit command to thread Jul 13 14:51:25 dieskim kernel: usb-storage: -- dissociate_dev Jul 13 14:51:25 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter detected Jul 13 14:51:25 dieskim kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0 Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.521038] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.572725] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.579407] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). From what i could google, there should be a ttyUSB0-2 if device is detected correctly. Let me know what other traces i can make.
Subject: Re: [Bugme-new] New: 3G USB HUAWEI E220 gsm modem On Fri, 13 Jul 2007 06:07:26 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=8746 > > Summary: 3G USB HUAWEI E220 gsm modem > Product: Drivers > Version: 2.5 > KernelVersion: 2.6.22.1 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: low > Priority: P1 > Component: USB > AssignedTo: greg@kroah.com > ReportedBy: smitpe@gmail.com > > > Most recent kernel where this bug did not occur: N.A. > Distribution: Debian > Hardware Environment: IBM Laptop T42 > Software Environment: Linux > Problem Description: 3G USB HUAWEI E220 gsm modem not detected/working > correctly > > Device: USB 3G size of a egg, cream with vodafone logo on the front, on > windows > scsi-cd with drivers on is also detected but ignored by linux, + 3 x USB > serial > ports, 1-Data 2-Mon 3-Diag > > Steps to reproduce: > Insert USB modem into usb port, and watch syslog. > only one device created /dev/ttyUSB0 > When i try and use it it disconnects. > > # lsusb > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 005: ID 0483:2016 SGS Thomson Microelectronics Fingerprint > Reader > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 007: ID 12d1:1003 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 011: ID 04b3:310b IBM Corp. Red Wheel Mouse > Bus 001 Device 010: ID 04b3:301b IBM Corp. > Bus 001 Device 009: ID 04b3:301a IBM Corp. > Bus 001 Device 001: ID 0000:0000 > > ###Device is:: Bus 002 Device 007: ID 12d1:1003 > > # cat /proc/bus/usb/devices ##((only 2 section i though is relevant)) > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.22.1-pesg uhci_hcd > S: Product=UHCI Host Controller > S: SerialNumber=0000:00:1d.1 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=12d1 ProdID=1003 Rev= 0.00 > S: Manufacturer=HUAWEI Technologies > S: Product=HUAWEI Mobile > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=option > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > >From Syslog: > ####Insert usb > Jul 13 14:49:42 dieskim kernel: usb 2-2: new full speed USB device using > uhci_hcd and address 13 > Jul 13 14:49:42 dieskim kernel: usb 2-2: configuration #1 chosen from 1 > choice > Jul 13 14:49:42 dieskim kernel: usb-storage: USB Mass Storage device detected > Jul 13 14:49:42 dieskim kernel: usb-storage: -- associate_dev > Jul 13 14:49:42 dieskim kernel: usb-storage: Vendor: 0x12d1, Product: 0x1003, > Revision: 0x0000 > Jul 13 14:49:42 dieskim kernel: usb-storage: Interface Subclass: 0x06, > Protocol: 0x50 > Jul 13 14:49:42 dieskim kernel: usb-storage: device ignored > Jul 13 14:49:42 dieskim kernel: usb-storage: storage_probe() failed > Jul 13 14:49:42 dieskim kernel: usb-storage: -- usb_stor_release_resources > Jul 13 14:49:42 dieskim kernel: usb-storage: -- sending exit command to > thread > Jul 13 14:49:42 dieskim kernel: usb-storage: -- dissociate_dev > Jul 13 14:49:42 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter > detected > Jul 13 14:49:42 dieskim kernel: usb 2-2: GSM modem (1-port) converter now > attached to ttyUSB0 > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.435021] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.487276] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.493958] > nm_hal_device_added (): New device added (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > > > ####Try and dial using ppp > #This kills the interface, and then it is re-detected > Jul 13 14:51:08 dieskim chat[32546]: send (ATZ^M) > Jul 13 14:51:08 dieskim chat[32546]: expect (OK) > Jul 13 14:51:08 dieskim kernel: usb 2-2: USB disconnect, address 13 > Jul 13 14:51:08 dieskim kernel: option 2-2:1.0: device disconnected > Jul 13 14:51:08 dieskim chat[32546]: warning: read() on stdin returned 0 > Jul 13 14:51:08 dieskim chat[32546]: Failed > Jul 13 14:51:08 dieskim chat[32546]: Can't restore terminal parameters: > Input/output error > Jul 13 14:51:09 dieskim pppd[32545]: Connect script failed > Jul 13 14:51:09 dieskim NetworkManager: <debug info>^I[1184331069.070690] > nm_hal_device_removed (): Device removed (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:51:09 dieskim NetworkManager: <debug info>^I[1184331069.072806] > nm_hal_device_removed (): Device removed (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:51:10 dieskim pppd[32545]: Hangup (SIGHUP) > Jul 13 14:51:10 dieskim pppd[32545]: Failed to open /dev/ttyUSB0: No such > device > Jul 13 14:51:10 dieskim kernel: option1 ttyUSB0: GSM modem (1-port) converter > now disconnected from ttyUSB0 > Jul 13 14:51:10 dieskim NetworkManager: <debug info>^I[1184331070.071384] > nm_hal_device_removed (): Device removed (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > Jul 13 14:51:14 dieskim pppd[32545]: Terminating on signal 15 > Jul 13 14:51:14 dieskim pppd[32545]: Exit. > Jul 13 14:51:25 dieskim kernel: usb 2-2: new full speed USB device using > uhci_hcd and address 14 > Jul 13 14:51:25 dieskim kernel: usb 2-2: configuration #1 chosen from 1 > choice > Jul 13 14:51:25 dieskim kernel: usb-storage: USB Mass Storage device detected > Jul 13 14:51:25 dieskim kernel: usb-storage: -- associate_dev > Jul 13 14:51:25 dieskim kernel: usb-storage: Vendor: 0x12d1, Product: 0x1003, > Revision: 0x0000 > Jul 13 14:51:25 dieskim kernel: usb-storage: Interface Subclass: 0x06, > Protocol: 0x50 > Jul 13 14:51:25 dieskim kernel: usb-storage: device ignored > Jul 13 14:51:25 dieskim kernel: usb-storage: storage_probe() failed > Jul 13 14:51:25 dieskim kernel: usb-storage: -- usb_stor_release_resources > Jul 13 14:51:25 dieskim kernel: usb-storage: -- sending exit command to > thread > Jul 13 14:51:25 dieskim kernel: usb-storage: -- dissociate_dev > Jul 13 14:51:25 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter > detected > Jul 13 14:51:25 dieskim kernel: usb 2-2: GSM modem (1-port) converter now > attached to ttyUSB0 > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.521038] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.572725] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.579407] > nm_hal_device_added (): New device added (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > > > > > >From what i could google, there should be a ttyUSB0-2 if device is detected > correctly. > > Let me know what other traces i can make. >
Support for the E220 was added in 2.6.20-rc2 it seems Patch: Linux 2.6.20-rc2 Johann Wilhelm (2): usb-storage: Ignore the virtual cd-drive of the Huawei E220 USB Modem usb-gsm-driver: Added VendorId and ProductId for Huawei E220 USB Modem
Found a reference to a utility to setup the usb device, will test monday. http://ske.sourceforge.net/html/projects/huawei/huawei_tre.html $ ls -la ./huaweiAktBbo-i386.out -rwxr-xr-x 1 root luca 5876 2007-05-25 21:48 ./huaweiAktBbo-i386.out # # #More instructions on manual loading + unpluging and replugging http://wiki.debian.org/Huawei_E220 # #The home of the huaweiAktBbo-i386.c #http://www.kanoistika.sk/bobovsky/archiv/umts/
Working. from http://www.kanoistika.sk/bobovsky/archiv/umts/ used recommended tool, it activated/waked the usb device and 2more ttyUSB devices became active. Rebooted. insert usb gsm modem, and all 3 appeared again. dialing working fine. not sure it it is something that can be incorporated into kernel, no gpl notice found on code.
Can you try Linus's latest kernel tree (or wait for 2.6.23-rc1)? There is changes in there for this device and it should "just work" properly. As for the userspace code that does the wierd device change, it is licensed under the gpl. I'll attach it here so it doesn't get lost.
Created attachment 12070 [details] c code that does something to the device.
Created attachment 12071 [details] c code that does something to the device. Cleaned up code from the previous version. Can someone test this stuff out?
i need a hint as to how to compile it.
same result on Linux version 2.6.22-14-powerpc (buildd@ross) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Sun Oct 14 21:42:06 GMT 2007 option.c is version v0.7.1 running the c code as root did bring up the additional devices as expected and the device worked for me, in a repeatable manner.
Ok moved on to 2.6.23.9 and now i am getting usb allocation errors for the 3Gusb device. Doing a lsusb i can see it appear (no description) and disappear. Moved back to 2.6.22.9 and all is fine once activated with the c code. Syslog extract at the bottom. I added the following file as /etc/udev/rules.d/50-huawei-e220.rules SUBSYSTEM=="usb", SYSFS{idProduct}=="1003", SYSFS{idVendor}=="12d1", RUN+="/home/pes/download/huaweiAktBbo-i386.out" SUBSYSTEM=="usb", SYSFS{idProduct}=="1003", SYSFS{idVendor}=="12d1", RUN+="/bin/sleep 5" SUBSYSTEM=="usb", SYSFS{idProduct}=="1003", SYSFS{idVendor}=="12d1", RUN+="/sbin/modprobe usbserial vendor=0x12d1 product=0x1003" To automate the setup of the device. From Syslog Nov 28 21:11:05 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 127 Nov 28 21:11:06 dieskim kernel: usb 2-2: configuration #1 chosen from 1 choice Nov 28 21:11:06 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter detected Nov 28 21:11:06 dieskim kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0 Nov 28 21:11:06 dieskim kernel: option 2-2:1.1: GSM modem (1-port) converter detected Nov 28 21:11:06 dieskim kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1 Nov 28 21:11:06 dieskim kernel: scsi66 : SCSI emulation for USB Mass Storage devices Nov 28 21:11:06 dieskim kernel: usb-storage: device found at 127 Nov 28 21:11:06 dieskim kernel: usb-storage: waiting for device to settle before scanning Nov 28 21:11:06 dieskim NetworkManager: <debug> [1196277066.154066] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61'). Nov 28 21:11:06 dieskim NetworkManager: <debug> [1196277066.406404] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if0'). Nov 28 21:11:06 dieskim NetworkManager: <debug> [1196277066.416711] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if0_serial_usb_0'). Nov 28 21:11:06 dieskim NetworkManager: <debug> [1196277066.525762] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if1'). Nov 28 21:11:06 dieskim NetworkManager: <debug> [1196277066.557459] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if1_serial_usb_1'). Nov 28 21:11:06 dieskim NetworkManager: <debug> [1196277066.655330] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if2'). Nov 28 21:11:06 dieskim NetworkManager: <debug> [1196277066.682493] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_usbraw'). Nov 28 21:11:16 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 127 Nov 28 21:11:16 dieskim kernel: scsi 66:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 Nov 28 21:11:16 dieskim kernel: sr0: scsi-1 drive Nov 28 21:11:16 dieskim kernel: sr 66:0:0:0: Attached scsi CD-ROM sr0 Nov 28 21:11:16 dieskim kernel: sr 66:0:0:0: Attached scsi generic sg0 type 5 Nov 28 21:11:16 dieskim kernel: usb-storage: device scan complete Nov 28 21:11:17 dieskim NetworkManager: <debug> [1196277077.152863] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if2_scsi_host'). Nov 28 21:11:17 dieskim NetworkManager: <debug> [1196277077.157825] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if2_scsi_host_scsi_device_lun0'). Nov 28 21:11:17 dieskim NetworkManager: <debug> [1196277077.171999] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if2_scsi_host_scsi_device_lun0_scsi_generic'). Nov 28 21:11:17 dieskim NetworkManager: <debug> [1196277077.457459] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'). Nov 28 21:11:25 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 127 Nov 28 21:11:26 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 127 Nov 28 21:11:26 dieskim kernel: usb 2-2: USB disconnect, address 127 Nov 28 21:11:26 dieskim kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 Nov 28 21:11:26 dieskim kernel: option 2-2:1.0: device disconnected Nov 28 21:11:26 dieskim kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 Nov 28 21:11:26 dieskim kernel: option 2-2:1.1: device disconnected Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.380288] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if0_serial_usb_0'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.384745] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if1_serial_usb_1'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.391060] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if2_scsi_host_scsi_device_lun0_scsi_generic'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.397337] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.402036] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if0'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.403434] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if1'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.405856] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if2_scsi_host_scsi_device_lun0'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.407390] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if2_scsi_host'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.410666] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_if2'). Nov 28 21:11:26 dieskim NetworkManager: <debug> [1196277086.412196] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_61_usbraw'). Nov 28 21:11:42 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2 Nov 28 21:11:43 dieskim kernel: usb 2-2: configuration #1 chosen from 1 choice Nov 28 21:11:43 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter detected Nov 28 21:11:43 dieskim kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0 Nov 28 21:11:43 dieskim kernel: option 2-2:1.1: GSM modem (1-port) converter detected Nov 28 21:11:43 dieskim kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1 Nov 28 21:11:43 dieskim kernel: scsi67 : SCSI emulation for USB Mass Storage devices Nov 28 21:11:43 dieskim kernel: usb-storage: device found at 2 Nov 28 21:11:43 dieskim kernel: usb-storage: waiting for device to settle before scanning Nov 28 21:11:43 dieskim NetworkManager: <debug> [1196277103.130012] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62'). Nov 28 21:11:43 dieskim NetworkManager: <debug> [1196277103.444338] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if1'). Nov 28 21:11:43 dieskim NetworkManager: <debug> [1196277103.455509] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if1_serial_usb_1'). Nov 28 21:11:43 dieskim NetworkManager: <debug> [1196277103.579696] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if0'). Nov 28 21:11:43 dieskim NetworkManager: <debug> [1196277103.596576] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if0_serial_usb_0'). Nov 28 21:11:43 dieskim NetworkManager: <debug> [1196277103.699670] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if2'). Nov 28 21:11:43 dieskim NetworkManager: <debug> [1196277103.717115] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_usbraw'). Nov 28 21:11:53 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 2 Nov 28 21:11:53 dieskim kernel: scsi 67:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 Nov 28 21:11:53 dieskim kernel: sr0: scsi-1 drive Nov 28 21:11:53 dieskim kernel: sr 67:0:0:0: Attached scsi CD-ROM sr0 Nov 28 21:11:53 dieskim kernel: sr 67:0:0:0: Attached scsi generic sg0 type 5 Nov 28 21:11:53 dieskim kernel: usb-storage: device scan complete Nov 28 21:11:54 dieskim NetworkManager: <debug> [1196277114.066484] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if2_scsi_host'). Nov 28 21:11:54 dieskim NetworkManager: <debug> [1196277114.071238] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if2_scsi_host_scsi_device_lun0'). Nov 28 21:11:54 dieskim NetworkManager: <debug> [1196277114.084880] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if2_scsi_host_scsi_device_lun0_scsi_generic'). Nov 28 21:11:54 dieskim NetworkManager: <debug> [1196277114.330305] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'). Nov 28 21:12:02 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 2 Nov 28 21:12:03 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 2 Nov 28 21:12:03 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:03 dieskim kernel: usb 2-2: USB disconnect, address 2 Nov 28 21:12:03 dieskim kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 Nov 28 21:12:03 dieskim kernel: option 2-2:1.0: device disconnected Nov 28 21:12:03 dieskim kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 Nov 28 21:12:03 dieskim kernel: option 2-2:1.1: device disconnected Nov 28 21:12:03 dieskim kernel: scsi 67:0:0:0: rejecting I/O to dead device Nov 28 21:12:03 dieskim last message repeated 3 times Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.417327] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if0_serial_usb_0'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.421570] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if1_serial_usb_1'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.428373] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if2_scsi_host_scsi_device_lun0'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.429467] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if2_scsi_host'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.432764] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.439834] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if2_scsi_host_scsi_device_lun0_scsi_generic'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.441804] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if1'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.443390] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if2'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.444989] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_usbraw'). Nov 28 21:12:03 dieskim NetworkManager: <debug> [1196277123.448186] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_62_if0'). Nov 28 21:12:19 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3 Nov 28 21:12:19 dieskim kernel: usb 2-2: configuration #1 chosen from 1 choice Nov 28 21:12:19 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter detected Nov 28 21:12:19 dieskim kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0 Nov 28 21:12:19 dieskim kernel: option 2-2:1.1: GSM modem (1-port) converter detected Nov 28 21:12:19 dieskim kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1 Nov 28 21:12:19 dieskim kernel: scsi68 : SCSI emulation for USB Mass Storage devices Nov 28 21:12:19 dieskim kernel: usb-storage: device found at 3 Nov 28 21:12:19 dieskim kernel: usb-storage: waiting for device to settle before scanning Nov 28 21:12:19 dieskim NetworkManager: <debug> [1196277139.984858] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63'). Nov 28 21:12:20 dieskim NetworkManager: <debug> [1196277140.297151] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if0'). Nov 28 21:12:20 dieskim NetworkManager: <debug> [1196277140.301878] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if0_serial_usb_0'). Nov 28 21:12:20 dieskim NetworkManager: <debug> [1196277140.451952] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if1'). Nov 28 21:12:20 dieskim NetworkManager: <debug> [1196277140.494571] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if1_serial_usb_1'). Nov 28 21:12:20 dieskim NetworkManager: <debug> [1196277140.622718] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if2'). Nov 28 21:12:20 dieskim NetworkManager: <debug> [1196277140.658652] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_usbraw'). Nov 28 21:12:30 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 3 Nov 28 21:12:30 dieskim kernel: scsi 68:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 Nov 28 21:12:30 dieskim kernel: sr0: scsi-1 drive Nov 28 21:12:30 dieskim kernel: sr 68:0:0:0: Attached scsi CD-ROM sr0 Nov 28 21:12:30 dieskim kernel: sr 68:0:0:0: Attached scsi generic sg0 type 5 Nov 28 21:12:30 dieskim kernel: usb-storage: device scan complete Nov 28 21:12:30 dieskim NetworkManager: <debug> [1196277150.907183] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if2_scsi_host'). Nov 28 21:12:30 dieskim NetworkManager: <debug> [1196277150.911596] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if2_scsi_host_scsi_device_lun0'). Nov 28 21:12:30 dieskim NetworkManager: <debug> [1196277150.923792] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if2_scsi_host_scsi_device_lun0_scsi_generic'). Nov 28 21:12:31 dieskim NetworkManager: <debug> [1196277151.186313] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'). Nov 28 21:12:41 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 3 Nov 28 21:12:51 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 3 Nov 28 21:12:51 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:51 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:52 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 3 Nov 28 21:12:52 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:52 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:52 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 3 Nov 28 21:12:53 dieskim kernel: usb 2-2: device not accepting address 3, error -71 Nov 28 21:12:53 dieskim nagios2: Auto-save of retention data completed successfully. Nov 28 21:12:53 dieskim kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 3 Nov 28 21:12:53 dieskim kernel: usb 2-2: device not accepting address 3, error -71 Nov 28 21:12:53 dieskim kernel: sr 68:0:0:0: scsi: Device offlined - not ready after error recovery Nov 28 21:12:53 dieskim kernel: usb 2-2: USB disconnect, address 3 Nov 28 21:12:53 dieskim kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 Nov 28 21:12:53 dieskim kernel: option 2-2:1.0: device disconnected Nov 28 21:12:53 dieskim kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 Nov 28 21:12:53 dieskim kernel: option 2-2:1.1: device disconnected Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.646694] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if0_serial_usb_0'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.651247] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if1_serial_usb_1'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.660053] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if2_scsi_host_scsi_device_lun0_scsi_generic'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.666659] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if2_scsi_host_scsi_device_lun0'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.667748] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if2_scsi_host'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.670667] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if0'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.672406] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if2'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.674183] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_if1'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.679469] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'). Nov 28 21:12:53 dieskim NetworkManager: <debug> [1196277173.682109] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_63_usbraw'). Nov 28 21:12:53 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 4 Nov 28 21:12:53 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:54 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:54 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 5 Nov 28 21:12:54 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:54 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:54 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 6 Nov 28 21:12:55 dieskim kernel: usb 2-2: device not accepting address 6, error -71 Nov 28 21:12:55 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 7 Nov 28 21:12:55 dieskim kernel: usb 2-2: device not accepting address 7, error -71 Nov 28 21:12:58 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 8 Nov 28 21:12:58 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:58 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:58 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 9 Nov 28 21:12:58 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:59 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:12:59 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 10 Nov 28 21:12:59 dieskim kernel: usb 2-2: device not accepting address 10, error -71 Nov 28 21:12:59 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 11 Nov 28 21:13:00 dieskim kernel: usb 2-2: device not accepting address 11, error -71 Nov 28 21:13:07 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 12 Nov 28 21:13:07 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:07 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:07 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 13 Nov 28 21:13:07 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:08 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:08 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 14 Nov 28 21:13:08 dieskim kernel: usb 2-2: device not accepting address 14, error -71 Nov 28 21:13:08 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 15 Nov 28 21:13:09 dieskim kernel: usb 2-2: device not accepting address 15, error -71 Nov 28 21:13:16 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 16 Nov 28 21:13:16 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:16 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:16 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 17 Nov 28 21:13:16 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:16 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:17 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 18 Nov 28 21:13:17 dieskim kernel: usb 2-2: device not accepting address 18, error -71 Nov 28 21:13:17 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 19 Nov 28 21:13:18 dieskim kernel: usb 2-2: device not accepting address 19, error -71 Nov 28 21:13:25 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 20 Nov 28 21:13:25 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:25 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:25 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 21 Nov 28 21:13:25 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:25 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:26 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 22 Nov 28 21:13:26 dieskim kernel: usb 2-2: device not accepting address 22, error -71 Nov 28 21:13:26 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 23 Nov 28 21:13:26 dieskim kernel: ''OUT-bochsvm':'IN= OUT=tap0 SRC=172.20.0.1 DST=172.20.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58 Nov 28 21:13:27 dieskim kernel: usb 2-2: device not accepting address 23, error -71 Nov 28 21:13:34 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 24 Nov 28 21:13:34 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:34 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:34 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 25 Nov 28 21:13:34 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:34 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:35 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 26 Nov 28 21:13:35 dieskim kernel: usb 2-2: device not accepting address 26, error -71 Nov 28 21:13:35 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 27 Nov 28 21:13:36 dieskim kernel: usb 2-2: device not accepting address 27, error -71 Nov 28 21:13:43 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 28 Nov 28 21:13:43 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:43 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:43 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 29 Nov 28 21:13:43 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:44 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:44 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 30 Nov 28 21:13:44 dieskim kernel: usb 2-2: device not accepting address 30, error -71 Nov 28 21:13:44 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 31 Nov 28 21:13:45 dieskim kernel: usb 2-2: device not accepting address 31, error -71 Nov 28 21:13:52 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 32 Nov 28 21:13:52 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:52 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:52 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 33 Nov 28 21:13:52 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:53 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:13:53 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 34 Nov 28 21:13:53 dieskim kernel: usb 2-2: device not accepting address 34, error -71 Nov 28 21:13:53 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 35 Nov 28 21:13:54 dieskim kernel: usb 2-2: device not accepting address 35, error -71 Nov 28 21:14:01 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 36 Nov 28 21:14:01 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:01 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:01 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 37 Nov 28 21:14:01 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:02 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:02 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 38 Nov 28 21:14:02 dieskim kernel: usb 2-2: device not accepting address 38, error -71 Nov 28 21:14:02 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 39 Nov 28 21:14:03 dieskim kernel: usb 2-2: device not accepting address 39, error -71 Nov 28 21:14:10 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 40 Nov 28 21:14:10 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:10 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:10 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 41 Nov 28 21:14:10 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:11 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:11 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 42 Nov 28 21:14:11 dieskim kernel: usb 2-2: device not accepting address 42, error -71 Nov 28 21:14:11 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 43 Nov 28 21:14:12 dieskim kernel: usb 2-2: device not accepting address 43, error -71 Nov 28 21:14:19 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 44 Nov 28 21:14:19 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:19 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:19 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 45 Nov 28 21:14:19 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:20 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:20 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 46 Nov 28 21:14:20 dieskim kernel: usb 2-2: device not accepting address 46, error -71 Nov 28 21:14:20 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 47 Nov 28 21:14:21 dieskim kernel: usb 2-2: device not accepting address 47, error -71 Nov 28 21:14:28 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 48 Nov 28 21:14:28 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:28 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:28 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 49 Nov 28 21:14:28 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:28 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:29 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 50 Nov 28 21:14:29 dieskim kernel: usb 2-2: device not accepting address 50, error -71 Nov 28 21:14:29 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 51 Nov 28 21:14:30 dieskim kernel: usb 2-2: device not accepting address 51, error -71 Nov 28 21:14:32 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 52 Nov 28 21:14:32 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:32 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:33 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 53 Nov 28 21:14:33 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:33 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:33 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 54 Nov 28 21:14:34 dieskim kernel: usb 2-2: device not accepting address 54, error -71 Nov 28 21:14:34 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 55 Nov 28 21:14:34 dieskim kernel: usb 2-2: device not accepting address 55, error -71 Nov 28 21:14:37 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 56 Nov 28 21:14:37 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:37 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:37 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 57 Nov 28 21:14:37 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:37 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:38 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 58 Nov 28 21:14:38 dieskim kernel: usb 2-2: device not accepting address 58, error -71 Nov 28 21:14:38 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 59 Nov 28 21:14:39 dieskim kernel: usb 2-2: device not accepting address 59, error -71 Nov 28 21:14:46 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 60 Nov 28 21:14:46 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:46 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:46 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 61 Nov 28 21:14:46 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:46 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:47 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 62 Nov 28 21:14:47 dieskim kernel: usb 2-2: device not accepting address 62, error -71 Nov 28 21:14:47 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 63 Nov 28 21:14:48 dieskim kernel: usb 2-2: device not accepting address 63, error -71 Nov 28 21:14:50 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 64 Nov 28 21:14:50 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:50 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:51 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 65 Nov 28 21:14:51 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:51 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:51 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 66 Nov 28 21:14:51 dieskim kernel: usb 2-2: device not accepting address 66, error -71 Nov 28 21:14:52 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 67 Nov 28 21:14:52 dieskim kernel: usb 2-2: device not accepting address 67, error -71 Nov 28 21:14:55 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 68 Nov 28 21:14:55 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:55 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:55 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 69 Nov 28 21:14:55 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:55 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:56 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 70 Nov 28 21:14:56 dieskim kernel: usb 2-2: device not accepting address 70, error -71 Nov 28 21:14:56 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 71 Nov 28 21:14:57 dieskim kernel: usb 2-2: device not accepting address 71, error -71 Nov 28 21:14:59 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 72 Nov 28 21:14:59 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:14:59 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:00 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 73 Nov 28 21:15:00 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:00 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:00 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 74 Nov 28 21:15:00 dieskim kernel: usb 2-2: device not accepting address 74, error -71 Nov 28 21:15:01 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 75 Nov 28 21:15:01 dieskim kernel: usb 2-2: device not accepting address 75, error -71 Nov 28 21:15:01 dieskim /USR/SBIN/CRON[23610]: (root) CMD (if [ -x /usr/bin/vnstat ] && [ `ls /var/lib/vnstat/ | wc -l` -ge 1 ]; then /usr/bin/vnstat -u; fi) Nov 28 21:15:06 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 76 Nov 28 21:15:06 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:06 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:06 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 77 Nov 28 21:15:06 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:07 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:07 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 78 Nov 28 21:15:07 dieskim kernel: usb 2-2: device not accepting address 78, error -71 Nov 28 21:15:07 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 79 Nov 28 21:15:08 dieskim kernel: usb 2-2: device not accepting address 79, error -71 Nov 28 21:15:15 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 80 Nov 28 21:15:15 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:15 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:15 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 81 Nov 28 21:15:15 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:16 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:16 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 82 Nov 28 21:15:16 dieskim kernel: usb 2-2: device not accepting address 82, error -71 Nov 28 21:15:16 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 83 Nov 28 21:15:17 dieskim kernel: usb 2-2: device not accepting address 83, error -71 Nov 28 21:15:24 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 84 Nov 28 21:15:24 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:24 dieskim kernel: usb 2-2: device descriptor read/64, error -71 Nov 28 21:15:24 dieskim kernel: usb 2-2: new full speed USB device using uhci_hcd and address 85 If there is anything more specific i should try please let me know.
Created attachment 13915 [details] Syslog - working 2.6.22.9 Syslog - of working 2.6.22.9 kernel
Linux linux 2.6.24pes12 #1 SMP Thu Feb 7 23:37:59 SAST 2008 i686 GNU/Linux This 2.6.24-git17 -> Ubuntu 7.10 And the ports are created without any intervention. /dev/ttyUSB0 and 1 the HSDPA modem works fine, also interesting is that i dont get the popup i was also able to mount the /dev/sr1 on the USB-HSDPA modem, and see the windows install files. From syslog.. Feb 8 17:34:01 localhost kernel: [ 2254.379864] usb 4-1: new full speed USB device using uhci_hcd and address 5 Feb 8 17:34:01 localhost kernel: [ 1928.082056] usb 4-1: configuration #1 chosen from 1 choice Feb 8 17:34:01 localhost kernel: [ 1928.085665] scsi9 : SCSI emulation for USB Mass Storage devices Feb 8 17:34:01 localhost NetworkManager: <debug> [1202484841.509905] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). Feb 8 17:34:01 localhost kernel: [ 1928.105395] usb-storage: device found at 5 Feb 8 17:34:01 localhost kernel: [ 1928.105400] usb-storage: waiting for device to settle before scanning Feb 8 17:34:01 localhost NetworkManager: <debug> [1202484841.551538] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). Feb 8 17:34:01 localhost kernel: [ 2254.488891] usb 4-1: USB disconnect, address 5 Feb 8 17:34:01 localhost NetworkManager: <debug> [1202484841.579680] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). Feb 8 17:34:01 localhost NetworkManager: <debug> [1202484841.581274] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). Feb 8 17:34:02 localhost kernel: [ 1928.282089] usb 4-1: new full speed USB device using uhci_hcd and address 6 Feb 8 17:34:02 localhost kernel: [ 2254.783875] usb 4-1: configuration #1 chosen from 1 choice Feb 8 17:34:02 localhost kernel: [ 2254.788707] usb-storage: probe of 4-1:1.0 failed with error -5 Feb 8 17:34:02 localhost kernel: [ 2254.788741] option 4-1:1.0: GSM modem (1-port) converter detected Feb 8 17:34:02 localhost kernel: [ 2254.788941] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0 Feb 8 17:34:02 localhost NetworkManager: <debug> [1202484842.481346] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). Feb 8 17:34:02 localhost kernel: [ 2254.825594] usb-storage: probe of 4-1:1.1 failed with error -5 Feb 8 17:34:02 localhost kernel: [ 2254.825632] option 4-1:1.1: GSM modem (1-port) converter detected Feb 8 17:34:02 localhost kernel: [ 2254.825824] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1 Feb 8 17:34:02 localhost kernel: [ 2254.871899] scsi12 : SCSI emulation for USB Mass Storage devices Feb 8 17:34:02 localhost kernel: [ 2254.884152] usb-storage: device found at 6 Feb 8 17:34:02 localhost kernel: [ 2254.884157] usb-storage: waiting for device to settle before scanning
Hi, please read http://gentoo-wiki.com/HARDWARE_HUAWEI_E220_HSDPA_USB_MODEM the "Switching to Modem Mode Section" should be of interest. Reagrds (In reply to comment #0) > Most recent kernel where this bug did not occur: N.A. > Distribution: Debian > Hardware Environment: IBM Laptop T42 > Software Environment: Linux > Problem Description: 3G USB HUAWEI E220 gsm modem not detected/working > correctly > > Device: USB 3G size of a egg, cream with vodafone logo on the front, on > windows > scsi-cd with drivers on is also detected but ignored by linux, + 3 x USB > serial > ports, 1-Data 2-Mon 3-Diag > > Steps to reproduce: > Insert USB modem into usb port, and watch syslog. > only one device created /dev/ttyUSB0 > When i try and use it it disconnects. > > # lsusb > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 005: ID 0483:2016 SGS Thomson Microelectronics Fingerprint > Reader > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 007: ID 12d1:1003 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 011: ID 04b3:310b IBM Corp. Red Wheel Mouse > Bus 001 Device 010: ID 04b3:301b IBM Corp. > Bus 001 Device 009: ID 04b3:301a IBM Corp. > Bus 001 Device 001: ID 0000:0000 > > ###Device is:: Bus 002 Device 007: ID 12d1:1003 > > # cat /proc/bus/usb/devices ##((only 2 section i though is relevant)) > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.22.1-pesg uhci_hcd > S: Product=UHCI Host Controller > S: SerialNumber=0000:00:1d.1 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=12d1 ProdID=1003 Rev= 0.00 > S: Manufacturer=HUAWEI Technologies > S: Product=HUAWEI Mobile > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=option > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > From Syslog: > ####Insert usb > Jul 13 14:49:42 dieskim kernel: usb 2-2: new full speed USB device using > uhci_hcd and address 13 > Jul 13 14:49:42 dieskim kernel: usb 2-2: configuration #1 chosen from 1 > choice > Jul 13 14:49:42 dieskim kernel: usb-storage: USB Mass Storage device detected > Jul 13 14:49:42 dieskim kernel: usb-storage: -- associate_dev > Jul 13 14:49:42 dieskim kernel: usb-storage: Vendor: 0x12d1, Product: 0x1003, > Revision: 0x0000 > Jul 13 14:49:42 dieskim kernel: usb-storage: Interface Subclass: 0x06, > Protocol: 0x50 > Jul 13 14:49:42 dieskim kernel: usb-storage: device ignored > Jul 13 14:49:42 dieskim kernel: usb-storage: storage_probe() failed > Jul 13 14:49:42 dieskim kernel: usb-storage: -- usb_stor_release_resources > Jul 13 14:49:42 dieskim kernel: usb-storage: -- sending exit command to > thread > Jul 13 14:49:42 dieskim kernel: usb-storage: -- dissociate_dev > Jul 13 14:49:42 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter > detected > Jul 13 14:49:42 dieskim kernel: usb 2-2: GSM modem (1-port) converter now > attached to ttyUSB0 > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.435021] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.487276] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.493958] > nm_hal_device_added (): New device added (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > > > ####Try and dial using ppp > #This kills the interface, and then it is re-detected > Jul 13 14:51:08 dieskim chat[32546]: send (ATZ^M) > Jul 13 14:51:08 dieskim chat[32546]: expect (OK) > Jul 13 14:51:08 dieskim kernel: usb 2-2: USB disconnect, address 13 > Jul 13 14:51:08 dieskim kernel: option 2-2:1.0: device disconnected > Jul 13 14:51:08 dieskim chat[32546]: warning: read() on stdin returned 0 > Jul 13 14:51:08 dieskim chat[32546]: Failed > Jul 13 14:51:08 dieskim chat[32546]: Can't restore terminal parameters: > Input/output error > Jul 13 14:51:09 dieskim pppd[32545]: Connect script failed > Jul 13 14:51:09 dieskim NetworkManager: <debug info>^I[1184331069.070690] > nm_hal_device_removed (): Device removed (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:51:09 dieskim NetworkManager: <debug info>^I[1184331069.072806] > nm_hal_device_removed (): Device removed (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:51:10 dieskim pppd[32545]: Hangup (SIGHUP) > Jul 13 14:51:10 dieskim pppd[32545]: Failed to open /dev/ttyUSB0: No such > device > Jul 13 14:51:10 dieskim kernel: option1 ttyUSB0: GSM modem (1-port) converter > now disconnected from ttyUSB0 > Jul 13 14:51:10 dieskim NetworkManager: <debug info>^I[1184331070.071384] > nm_hal_device_removed (): Device removed (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > Jul 13 14:51:14 dieskim pppd[32545]: Terminating on signal 15 > Jul 13 14:51:14 dieskim pppd[32545]: Exit. > Jul 13 14:51:25 dieskim kernel: usb 2-2: new full speed USB device using > uhci_hcd and address 14 > Jul 13 14:51:25 dieskim kernel: usb 2-2: configuration #1 chosen from 1 > choice > Jul 13 14:51:25 dieskim kernel: usb-storage: USB Mass Storage device detected > Jul 13 14:51:25 dieskim kernel: usb-storage: -- associate_dev > Jul 13 14:51:25 dieskim kernel: usb-storage: Vendor: 0x12d1, Product: 0x1003, > Revision: 0x0000 > Jul 13 14:51:25 dieskim kernel: usb-storage: Interface Subclass: 0x06, > Protocol: 0x50 > Jul 13 14:51:25 dieskim kernel: usb-storage: device ignored > Jul 13 14:51:25 dieskim kernel: usb-storage: storage_probe() failed > Jul 13 14:51:25 dieskim kernel: usb-storage: -- usb_stor_release_resources > Jul 13 14:51:25 dieskim kernel: usb-storage: -- sending exit command to > thread > Jul 13 14:51:25 dieskim kernel: usb-storage: -- dissociate_dev > Jul 13 14:51:25 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter > detected > Jul 13 14:51:25 dieskim kernel: usb 2-2: GSM modem (1-port) converter now > attached to ttyUSB0 > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.521038] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.572725] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.579407] > nm_hal_device_added (): New device added (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > > > > > From what i could google, there should be a ttyUSB0-2 if device is detected > correctly. > > Let me know what other traces i can make. >
Have you tried http://gentoo-wiki.com/HARDWARE_HUAWEI_E220_HSDPA_USB_MODEM where the "Switching to modem mode" section should be of interest? (In reply to comment #0) > Most recent kernel where this bug did not occur: N.A. > Distribution: Debian > Hardware Environment: IBM Laptop T42 > Software Environment: Linux > Problem Description: 3G USB HUAWEI E220 gsm modem not detected/working > correctly > > Device: USB 3G size of a egg, cream with vodafone logo on the front, on > windows > scsi-cd with drivers on is also detected but ignored by linux, + 3 x USB > serial > ports, 1-Data 2-Mon 3-Diag > > Steps to reproduce: > Insert USB modem into usb port, and watch syslog. > only one device created /dev/ttyUSB0 > When i try and use it it disconnects. > > # lsusb > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 005: ID 0483:2016 SGS Thomson Microelectronics Fingerprint > Reader > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 007: ID 12d1:1003 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 011: ID 04b3:310b IBM Corp. Red Wheel Mouse > Bus 001 Device 010: ID 04b3:301b IBM Corp. > Bus 001 Device 009: ID 04b3:301a IBM Corp. > Bus 001 Device 001: ID 0000:0000 > > ###Device is:: Bus 002 Device 007: ID 12d1:1003 > > # cat /proc/bus/usb/devices ##((only 2 section i though is relevant)) > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.22.1-pesg uhci_hcd > S: Product=UHCI Host Controller > S: SerialNumber=0000:00:1d.1 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=12d1 ProdID=1003 Rev= 0.00 > S: Manufacturer=HUAWEI Technologies > S: Product=HUAWEI Mobile > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=option > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > From Syslog: > ####Insert usb > Jul 13 14:49:42 dieskim kernel: usb 2-2: new full speed USB device using > uhci_hcd and address 13 > Jul 13 14:49:42 dieskim kernel: usb 2-2: configuration #1 chosen from 1 > choice > Jul 13 14:49:42 dieskim kernel: usb-storage: USB Mass Storage device detected > Jul 13 14:49:42 dieskim kernel: usb-storage: -- associate_dev > Jul 13 14:49:42 dieskim kernel: usb-storage: Vendor: 0x12d1, Product: 0x1003, > Revision: 0x0000 > Jul 13 14:49:42 dieskim kernel: usb-storage: Interface Subclass: 0x06, > Protocol: 0x50 > Jul 13 14:49:42 dieskim kernel: usb-storage: device ignored > Jul 13 14:49:42 dieskim kernel: usb-storage: storage_probe() failed > Jul 13 14:49:42 dieskim kernel: usb-storage: -- usb_stor_release_resources > Jul 13 14:49:42 dieskim kernel: usb-storage: -- sending exit command to > thread > Jul 13 14:49:42 dieskim kernel: usb-storage: -- dissociate_dev > Jul 13 14:49:42 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter > detected > Jul 13 14:49:42 dieskim kernel: usb 2-2: GSM modem (1-port) converter now > attached to ttyUSB0 > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.435021] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.487276] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:49:42 dieskim NetworkManager: <debug info>^I[1184330982.493958] > nm_hal_device_added (): New device added (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > > > ####Try and dial using ppp > #This kills the interface, and then it is re-detected > Jul 13 14:51:08 dieskim chat[32546]: send (ATZ^M) > Jul 13 14:51:08 dieskim chat[32546]: expect (OK) > Jul 13 14:51:08 dieskim kernel: usb 2-2: USB disconnect, address 13 > Jul 13 14:51:08 dieskim kernel: option 2-2:1.0: device disconnected > Jul 13 14:51:08 dieskim chat[32546]: warning: read() on stdin returned 0 > Jul 13 14:51:08 dieskim chat[32546]: Failed > Jul 13 14:51:08 dieskim chat[32546]: Can't restore terminal parameters: > Input/output error > Jul 13 14:51:09 dieskim pppd[32545]: Connect script failed > Jul 13 14:51:09 dieskim NetworkManager: <debug info>^I[1184331069.070690] > nm_hal_device_removed (): Device removed (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:51:09 dieskim NetworkManager: <debug info>^I[1184331069.072806] > nm_hal_device_removed (): Device removed (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:51:10 dieskim pppd[32545]: Hangup (SIGHUP) > Jul 13 14:51:10 dieskim pppd[32545]: Failed to open /dev/ttyUSB0: No such > device > Jul 13 14:51:10 dieskim kernel: option1 ttyUSB0: GSM modem (1-port) converter > now disconnected from ttyUSB0 > Jul 13 14:51:10 dieskim NetworkManager: <debug info>^I[1184331070.071384] > nm_hal_device_removed (): Device removed (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > Jul 13 14:51:14 dieskim pppd[32545]: Terminating on signal 15 > Jul 13 14:51:14 dieskim pppd[32545]: Exit. > Jul 13 14:51:25 dieskim kernel: usb 2-2: new full speed USB device using > uhci_hcd and address 14 > Jul 13 14:51:25 dieskim kernel: usb 2-2: configuration #1 chosen from 1 > choice > Jul 13 14:51:25 dieskim kernel: usb-storage: USB Mass Storage device detected > Jul 13 14:51:25 dieskim kernel: usb-storage: -- associate_dev > Jul 13 14:51:25 dieskim kernel: usb-storage: Vendor: 0x12d1, Product: 0x1003, > Revision: 0x0000 > Jul 13 14:51:25 dieskim kernel: usb-storage: Interface Subclass: 0x06, > Protocol: 0x50 > Jul 13 14:51:25 dieskim kernel: usb-storage: device ignored > Jul 13 14:51:25 dieskim kernel: usb-storage: storage_probe() failed > Jul 13 14:51:25 dieskim kernel: usb-storage: -- usb_stor_release_resources > Jul 13 14:51:25 dieskim kernel: usb-storage: -- sending exit command to > thread > Jul 13 14:51:25 dieskim kernel: usb-storage: -- dissociate_dev > Jul 13 14:51:25 dieskim kernel: option 2-2:1.0: GSM modem (1-port) converter > detected > Jul 13 14:51:25 dieskim kernel: usb 2-2: GSM modem (1-port) converter now > attached to ttyUSB0 > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.521038] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'). > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.572725] > nm_hal_device_added (): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'). > Jul 13 14:51:25 dieskim NetworkManager: <debug info>^I[1184331085.579407] > nm_hal_device_added (): New device added (hal udi is > > '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0'). > > > > > From what i could google, there should be a ttyUSB0-2 if device is detected > correctly. > > Let me know what other traces i can make. >