Most recent kernel where this bug did *NOT* occur: 2.6.18.17 Distribution: debian [1.] One line summary of the problem: SATA Problem: port is slow to respond [2.] Full description of the problem/report: The following messages appear while booting/in dmesg [1]: [...] ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: softreset failed (device not ready) ata2: softreset failed, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: reset failed, giving up scsi2 : ahci [...] This of course means extra long booting time :( [1] http://wieland.homelinux.org/hp_dc5750/dmesg_2.6.19.3.txt A further issue which - imho is coupled w/ this one - is that my cd/dvd+rw (also sata) combo drive simply does not work: firstly there is no indication in dmesg that it was found and secondly it behaves like dead: it does not open if i press the button and it does not blink; it can be opened until these message appear on the screen. I need to unplug and the replug it after shutting down/reboot so that on the next bootup the bios is able to find it (else it would still behave like dead)! The drive itself is ok i guess at least it works fine on a different OS. I found a debian bug report where the problem (but unfortunately not a solution that worked for me) is described: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=391867 [3.] Keywords (i.e., modules, networking, kernel): SATA, ATA [4.] Kernel version (from /proc/version): Linux version 2.6.19.3 (root@kvpc31) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #2 SMP Thu Feb 15 02:59:14 CET 2007 [8.1.] Software (add the output of the ver_linux script here) http://wieland.homelinux.org/hp_dc5750/ver_linux.txt [8.2.] Processor information (from /proc/cpuinfo): http://wieland.homelinux.org/hp_dc5750/proc_cpuinfo.txt [8.3.] Module information (from /proc/modules): http://wieland.homelinux.org/hp_dc5750/proc_modules.txt [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) http://wieland.homelinux.org/hp_dc5750/proc_iomem.txt http://wieland.homelinux.org/hp_dc5750/proc_ioports.txt [8.5.] PCI information ('lspci -vvv' as root) http://wieland.homelinux.org/hp_dc5750/lspci-vvv.txt [8.6.] SCSI information (from /proc/scsi/scsi) http://wieland.homelinux.org/hp_dc5750/proc_scsi_scsi.txt [X.] Other notes, patches, fixes, workarounds: Also it seems that the System is not capeable of recongnizing the HDD: hdparm -i /dev/sda HDIO_GET_IDENTITY failed: Inappropriate ioctl for device A user on an German mailinglist suggest to uses pata_atiixp instead of atiixp but yet again this does not work for me: http://lists.opensuse.org/archive/opensuse-mobile-de/ 2007-01/msg00001.html All the information i collected can be found at: http://wieland.homelinux.org/hp_dc5750/ I've tried several kernel version in the meantime, starting w/ the standard debian testing i386 kernel, then tried different vanilla versions 2.6.18.6, 2.6.19, 2.6.19.3 which are all affected in the same way. However 2.6.20 behaves differently: there is another error message which scrolls over the screen so fast that I'm not able to read it, the only thing i was able to catch that it also concerns (s)ata, looking like 'ata2.0: [...] failed [...]'
Debugging on linux-ide. http://thread.gmane.org/gmane.linux.ide/16049
Same problem for me using 2.6.20, 2.6.21-rc6 and 2.6.21-rc6-mm on a notebook HP510 with PATA hard disk drive. [1.] One line summary of the problem: Sometimes, my Ubuntu Feisty freezes during ~30 seconds. [2.] Full description of the problem/report: As soon as this happens, I did a dmesg : [ 257.025000] ata1.01: qc timeout (cmd 0xa0) [ 257.025000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 257.025000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 da ta 0 [ 257.025000] res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeo ut) [ 262.075000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 267.073000] ata1: device not ready (errno=-16), forcing hardreset [ 267.073000] ata1: BUG: prereset() requested invalid reset type [ 267.073000] ata1: soft resetting port [ 267.419000] ata1.00: configured for UDMA/100 [ 267.609000] ata1.01: configured for MWDMA2 [ 267.609000] ata1: EH complete [ 267.614000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 267.620000] sd 0:0:0:0: [sda] Write Protect is off [ 267.620000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 267.628000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 267.636000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 267.637000] sd 0:0:0:0: [sda] Write Protect is off [ 267.637000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 267.992000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [3.] Keywords (i.e., modules, networking, kernel): kernel pata freeze frozen exception slow timeout [4.] Kernel version (from /proc/version): Linux version 2.6.21-rc6-mm1 (root@knux-laptop) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #1 Thu Apr 12 01:09:42 CEST 2007 And 2.6.20 from ubuntu / 2.6.21-rc6 from kernel.org. [5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) N/A [6.] A small shell script or example program which triggers the problem (if possible) N/A it's random. [7.] Environment [7.1.] Software (add the output of the ver_linux script here) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux knux-laptop 2.6.21-rc6-mm1 #1 Thu Apr 12 01:09:42 CEST 2007 i686 GNU/Linux Gnu C 4.1.2 Gnu make 3.81 binutils 2.17.50 util-linux 2.12r mount 2.12r module-init-tools 3.3-pre2 e2fsprogs 1.40-WIP reiserfsprogs 3.6.19 pcmciautils 014 PPP 2.4.4 Linux C Library > libc.2.5 Dynamic linker (ldd) 2.5 Procps 3.2.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.97 udev 108 wireless-tools 28 Modules Loaded binfmt_misc nfs nfsd exportfs lockd sunrpc i915 drm capability commoncap acpi_cpufreq cpufreq_userspace cpufreq_stats cpufreq_ondemand freq_table cpufreq_conservative cpufreq_powersave sbs button ac video battery asus_acpi dock container ipv6 lp fuse snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss pcmcia snd_seq_midi snd_rawmidi snd_seq_midi_event af_packet snd_seq snd_timer snd_seq_device yenta_socket rsrc_nonstatic pcmcia_core iTCO_wdt iTCO_vendor_support parport_pc parport intel_agp agpgart snd soundcore snd_page_alloc tsdev evdev pcspkr ext3 jbd mbcache sg sr_mod cdrom sd_mod piix generic pata_acpi usbhid hid ata_piix ata_generic e100 mii libata uhci_hcd ehci_hcd scsi_mod usbcore thermal processor fan [7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 2.13GHz stepping : 8 cpu MHz : 800.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2 bogomips : 1603.74 clflush size : 64 [7.3.] Module information (from /proc/modules): binfmt_misc 11272 1 - Live 0xe03b9000 nfs 236972 0 - Live 0xe0481000 nfsd 217264 17 - Live 0xe06a8000 exportfs 5696 1 nfsd, Live 0xe03b6000 lockd 65480 3 nfs,nfsd, Live 0xe03e1000 sunrpc 163996 7 nfs,nfsd,lockd, Live 0xe038c000 i915 23552 2 - Live 0xe02d6000 drm 82132 3 i915, Live 0xe02e2000 capability 5320 0 - Live 0xe02c8000 commoncap 8384 1 capability, Live 0xe02c4000 acpi_cpufreq 7948 1 - Live 0xe02df000 cpufreq_userspace 4052 0 - Live 0xe027c000 cpufreq_stats 5508 0 - Live 0xe0279000 cpufreq_ondemand 7804 1 - Live 0xe0276000 freq_table 4740 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand, Live 0xe0273000 cpufreq_conservative 6688 0 - Live 0xe0270000 cpufreq_powersave 1792 0 - Live 0xe00b7000 sbs 18568 0 - Live 0xe026a000 button 7952 0 - Live 0xe0267000 ac 5316 0 - Live 0xe0260000 video 16648 0 - Live 0xe025a000 battery 12040 0 - Live 0xe0256000 asus_acpi 16476 0 - Live 0xe0250000 dock 9476 0 - Live 0xe024c000 container 4544 0 - Live 0xe0264000 ipv6 265824 12 - Live 0xe0814000 lp 11652 0 - Live 0xe01fe000 fuse 44820 0 - Live 0xe0240000 snd_intel8x0 33564 1 - Live 0xe01f0000 snd_ac97_codec 98848 1 snd_intel8x0, Live 0xe0226000 ac97_bus 2304 1 snd_ac97_codec, Live 0xe0032000 snd_pcm_oss 43712 0 - Live 0xe01a9000 snd_mixer_oss 16704 1 snd_pcm_oss, Live 0xe019f000 snd_pcm 78088 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live 0xe01db000 snd_seq_dummy 3844 0 - Live 0xe019d000 snd_seq_oss 32320 0 - Live 0xe0194000 pcmcia 29856 0 - Live 0xe018b000 snd_seq_midi 8704 0 - Live 0xe01a5000 snd_rawmidi 24832 1 snd_seq_midi, Live 0xe015f000 snd_seq_midi_event 7552 2 snd_seq_oss,snd_seq_midi, Live 0xe015c000 af_packet 21704 2 - Live 0xe0184000 snd_seq 51248 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event, Live 0xe0176000 snd_timer 23172 2 snd_pcm,snd_seq, Live 0xe0155000 snd_seq_device 8396 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq, Live 0xe014c000 yenta_socket 26956 1 - Live 0xe0142000 rsrc_nonstatic 13312 1 yenta_socket, Live 0xe013d000 pcmcia_core 39760 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xe0132000 iTCO_wdt 10720 0 - Live 0xe0151000 iTCO_vendor_support 3972 1 iTCO_wdt, Live 0xe0065000 parport_pc 35876 0 - Live 0xe0126000 parport 36040 2 lp,parport_pc, Live 0xe0117000 intel_agp 24092 1 - Live 0xe010b000 agpgart 33904 3 drm,intel_agp, Live 0xe0101000 snd 52548 12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device, Live 0xe00f3000 soundcore 7520 1 snd, Live 0xe007f000 snd_page_alloc 10120 2 snd_intel8x0,snd_pcm, Live 0xe0122000 tsdev 8448 0 - Live 0xe00c5000 evdev 11712 3 - Live 0xe00c1000 pcspkr 3008 0 - Live 0xe002e000 ext3 131592 1 - Live 0xe00d1000 jbd 53608 1 ext3, Live 0xe0167000 mbcache 8384 1 ext3, Live 0xe00bd000 sg 35868 0 - Live 0xe00ad000 sr_mod 16548 0 - Live 0xe00a7000 cdrom 36640 1 sr_mod, Live 0xe009d000 sd_mod 29648 2 - Live 0xe0094000 piix 9476 0 [permanent], Live 0xe00b9000 generic 4868 0 [permanent], Live 0xe007c000 pata_acpi 8256 0 - Live 0xe006f000 usbhid 26272 0 - Live 0xe008c000 hid 26816 1 usbhid, Live 0xe00c9000 ata_piix 14980 1 - Live 0xe006a000 ata_generic 7876 0 - Live 0xe0067000 e100 34888 0 - Live 0xe005b000 mii 5696 1 e100, Live 0xe0034000 libata 124372 3 pata_acpi,ata_piix,ata_generic, Live 0xe003b000 uhci_hcd 25488 0 - Live 0xe0074000 ehci_hcd 34956 0 - Live 0xe0082000 scsi_mod 147084 4 sg,sr_mod,sd_mod,libata, Live 0xe01b6000 usbcore 135636 4 usbhid,uhci_hcd,ehci_hcd, Live 0xe0203000 thermal 14088 0 - Live 0xe0027000 processor 23408 2 acpi_cpufreq,thermal, Live 0xe0020000 fan 4868 0 - Live 0xe0038000 [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) $ cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:1f.1 0170-0177 : libata 01f0-01f7 : 0000:00:1f.1 01f0-01f7 : libata 0376-0376 : 0000:00:1f.1 0376-0376 : libata 03c0-03df : vga+ 03f6-03f6 : 0000:00:1f.1 03f6-03f6 : libata 04d0-04d1 : pnp 00:0a 0cf8-0cff : PCI conf1 1000-107f : 0000:00:1f.0 1000-107f : pnp 00:0a 1000-1003 : ACPI PM1a_EVT_BLK 1004-1005 : ACPI PM1a_CNT_BLK 1008-100b : ACPI PM_TMR 1010-1015 : ACPI CPU throttle 1020-1020 : ACPI PM2_CNT_BLK 1028-102f : ACPI GPE0_BLK 1060-107f : iTCO_wdt 1100-113f : 0000:00:1f.0 1100-113f : pnp 00:0a 1200-121f : pnp 00:0a 2000-2fff : PCI Bus #02 2000-203f : 0000:02:08.0 2000-203f : e100 2400-24ff : PCI CardBus #03 2800-28ff : PCI CardBus #03 3000-3007 : 0000:00:02.0 3020-303f : 0000:00:1d.0 3020-303f : uhci_hcd 3100-31ff : 0000:00:1e.2 3100-31ff : Intel ICH6 3200-323f : 0000:00:1e.2 3200-323f : Intel ICH6 3400-34ff : 0000:00:1e.3 3500-357f : 0000:00:1e.3 3580-358f : 0000:00:1f.1 3580-358f : libata $ cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-1f7cffff : System RAM 00100000-002ec5ff : Kernel code 002ec600-003c4e53 : Kernel data 1f7d0000-1f7efbff : reserved 1f7efc00-1f7fafff : ACPI Non-volatile Storage 1f7fb000-1f7fffff : reserved 20000000-23ffffff : PCI Bus #02 20000000-23ffffff : PCI CardBus #03 24000000-27ffffff : PCI CardBus #03 c0000000-cfffffff : 0000:00:02.0 d0000000-d05fffff : PCI Bus #02 d0000000-d0000fff : 0000:02:04.0 d0001000-d0001fff : 0000:02:06.0 d0001000-d0001fff : yenta_socket d0002000-d0002fff : 0000:02:08.0 d0002000-d0002fff : e100 d0600000-d067ffff : 0000:00:02.0 d0680000-d06bffff : 0000:00:02.0 d0700000-d077ffff : 0000:00:02.1 d0780000-d07803ff : 0000:00:1d.7 d0780000-d07803ff : ehci_hcd d0781000-d07811ff : 0000:00:1e.2 d0781000-d07811ff : Intel ICH6 d0782000-d07820ff : 0000:00:1e.2 d0782000-d07820ff : Intel ICH6 e0000000-efffffff : reserved fec00000-fec01fff : reserved fed20000-fed9afff : reserved feda0000-fedbffff : reserved ffb00000-ffbfffff : reserved fff00000-ffffffff : reserved [7.5.] PCI information ('lspci -vvv' as root) $ sudo lspci -vvv Password: 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0600000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 3000 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at d0680000 (32-bit, non-prefetchable) [size=256K] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at d0700000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 3020 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at d0780000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0000000-d05fffff Prefetchable memory behind bridge: 0000000020000000-0000000023ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 30c4 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 3100 [size=256] Region 1: I/O ports at 3200 [size=64] Region 2: Memory at d0781000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0782000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 3400 [size=256] Region 1: I/O ports at 3500 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 3580 [size=16] 02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) Subsystem: Hewlett-Packard Company Unknown device 12f6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- 02:06.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 20000000-23fff000 (prefetchable) Memory window 1: 24000000-27fff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 02:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 03) Subsystem: Hewlett-Packard Company Unknown device 30c4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0002000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 2000 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- [7.6.] SCSI information (from /proc/scsi/scsi) $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD600UE-22KV Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: TSSTcorp Model: CD/DVDW TS-L632D Rev: HH15 Type: CD-ROM ANSI SCSI revision: 05 [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): No idea. [X.] Other notes, patches, fixes, workarounds: N/A
The same issue is discussed in ubuntu launchpad: https://bugs.launchpad.net/linux/+bug/84603 I believe before copying and pasting lines of logs, so developer could maybe tell us what would be required. A workaround is to crossflash your CDDrive. I am okay to revert back to the non working one as soon as developer needs more information.
Hi, this is dafrabbit, I commented multiple times on the launchpad bug mentioned by chantra above and have been following this bug. We've been looking for some developer input as to what is causing this and what we as end users can do to help track down this problem. It is serious, and definitely impacts the long term usability of Ubuntu, Debian and all other linux distros (if such a problem is the case for them as well). Thanks, dafrabbit
KnuX, Chantra, Fred Huang. You guys are reporting a completely different bug. Please file a separate bug report and assign it to me. Thanks. The original bug report was about sb600 setting incorrect error status bit and fix has been included in upstream for some time now. Closing.
Is bug#8316 the same bug you guys are seeing? If so, can you add a me too note there with hw info? Thanks.
Tejun, sounds likes it. going to update this bug