Bug 7703 - hpt366 does not find drives
hpt366 does not find drives
Status: CLOSED CODE_FIX
Product: IO/Storage
Classification: Unclassified
Component: IDE
i386 Linux
: P2 normal
Assigned To: Sergei Shtylyov
:
Depends on:
Blocks:
  Show dependency treegraph
 
Reported: 2006-12-17 21:58 UTC by David Young
Modified: 2010-03-27 11:32 UTC (History)
6 users (show)

See Also:
Kernel Version: 2.4.19 and 2.6.*
Tree: Mainline
Regression: Yes


Attachments

Description David Young 2006-12-17 21:58:14 UTC
Most recent kernel where this bug did *NOT* occur:2.4.18
Distribution:redhat 7.2, slackware 10.[1-2] fedora-fc[5-6]
Hardware Environment:iWill dual pIII Tualatin 1.13G 512K cache 2GbRAM
four IDE channels on motherboard,
two (hda,hdb,hdc) controlled by VIA ATA33
and two (hde,hdg) by HPT366 (rev 04) ATA66hda: 78165360 sectors (40021 MB)
w/2048KiB Cache, CHS=4865/255/63, UDMA(100)

hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hda: WDC WD400BB-00CAA0, ATA DISK drive
hdc: 268435455 sectors (137439 MB) w/8192KiB Cache, CHS=266305/16/63, UDMA(100)
hdc: ST3160023A, ATA DISK drive
hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
hde: ST340016A, ATA DISK drive
hdg: 268435455 sectors (137439 MB) w/8192KiB Cache, CHS=266305/16/63, UDMA(100)
hdg: WDC WD1600JB-00GVA0, ATA DISK drive
hdb: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)

Software Environment:redhat 7.2, file server, console mode only

Problem Description:When trying to upgrade the kernel or the distribution from
2.4.18 to anything newer the hpt driver fails. If nodma is set with 2.4.33+ then
it will eventually bring hde online slowly and hdg will function normally.
When using any 2.6 kernel, upto and including 2.6.19 + 20rc1 patch, neither of
the drives are detected.

Steps to reproduce:Insert new distribution CDROM
(Fedora FC5, FC6, Slackware 10.1, 10.2) and boot from cdrom.
Only VIA attached drives are detected.

I believe this might be connected to #1128.
Comment 1 Sergei Shtylyov 2006-12-18 06:07:12 UTC
> Most recent kernel where this bug did *NOT* occur:2.4.18

I assume that the massive changes made by Sun people in 2.4.19-rc1 are to be
blamed then...

> and two (hde,hdg) by HPT366 (rev 04)

That's actually HPT370A chip.

> Problem Description:When trying to upgrade the kernel or the distribution from
> 2.4.18 to anything newer the hpt driver fails. If nodma is set with 2.4.33+ then
> it will eventually bring hde online slowly and hdg will function normally.

What kind of messages (if any) accompany this slow bring up?

> When using any 2.6 kernel, upto and including 2.6.19 + 20rc1 patch, neither of
> the drives are detected.

Not even detected? Interesting...
Comment 2 David Young 2006-12-18 13:58:41 UTC

bugme-daemon@bugzilla.kernel.org wrote:

> ------- Additional Comments From sshtylyov@ru.mvista.com  2006-12-18 06:07 -------
>> Most recent kernel where this bug did *NOT* occur:2.4.18
> 
> I assume that the massive changes made by Sun people in 2.4.19-rc1 are to be
> blamed then...
> 
>> and two (hde,hdg) by HPT366 (rev 04)
> 
> That's actually HPT370A chip.

Thanks, that clears that piece up.
> 
>> Problem Description:When trying to upgrade the kernel or the distribution from
>> 2.4.18 to anything newer the hpt driver fails. If nodma is set with 2.4.33+ then
>> it will eventually bring hde online slowly and hdg will function normally.
> 
> What kind of messages (if any) accompany this slow bring up?

dma failure on /dev/hde?
turning dma off
continued dma failures

Then it finally comes up but runs at < 2Mb/sec.

I have tried nodma, autotune, setting the ata speed to 66 and 33.
All 2.4.19+ fail the same way.
> 
>> When using any 2.6 kernel, upto and including 2.6.19 + 20rc1 patch, neither of
>> the drives are detected.
> 
> Not even detected? Interesting...
> 
I haven't set the serial port up as the console as yet.  I used to use 
it exclusively but haven't in quite a while.  It needs an early printk, 
I think, to let me capture the output.

And a newbee bugzilla question, should I paste these comments in the bug 
or just reply here?

Thanks,

David

Comment 3 David Young 2006-12-19 02:26:42 UTC
I just finished trying these combinations: 2.4.33.4 acpi=no pci=biosirq and
ide0=33 ide1=33 ide2=ata66 ide2=autotune ide3=ata66 ide3=autotune
Did not detect the drives connected to the 370.
Also, I reconnected the drives since the 40G on the hpt was usually the problem
child.  Now I have two 40G on the VIA and two 160G on the hpt.  I removed the
labels on the drives and cleaned up lilo.conf, all to no avail.

Then I tried something I found in lkml on 2.6.20-rc1 combined_mode=libata but
the result was still no drive detection.

I have a serial cable connected and will try getting a log of the failure mode
tomorrow.
Comment 4 Sergei Shtylyov 2006-12-19 05:51:36 UTC
>>>Problem Description:When trying to upgrade the kernel or the distribution from
>>>2.4.18 to anything newer the hpt driver fails. If nodma is set with 2.4.33+ then
>>>it will eventually bring hde online slowly and hdg will function normally.

>>What kind of messages (if any) accompany this slow bring up?

> dma failure on /dev/hde?
> turning dma off
> continued dma failures

    I don't follow you here -- you just said you used ide-nodma...

> Then it finally comes up but runs at < 2Mb/sec.

    That's PIO speed.

> I have tried nodma, autotune, setting the ata speed to 66 and 33.
> All 2.4.19+ fail the same way.

    Could you try the driver from the -mm tree -- it's been completely 
redesigned...

>>>When using any 2.6 kernel, upto and including 2.6.19 + 20rc1 patch, neither of
>>>the drives are detected.

>>Not even detected? Interesting...

> I haven't set the serial port up as the console as yet.  I used to use 
> it exclusively but haven't in quite a while.  It needs an early printk, 
> I think, to let me capture the output.

    Not really, at least in 2.6...

> And a newbee bugzilla question, should I paste these comments in the bug 
> or just reply here?

    Both ways work, and obviously replying by mail works better since this 
Bugzilla doesn't have the ability to facilitate quoted replies...

Comment 5 David Young 2006-12-20 21:25:06 UTC
Updating slightly out of order here.

 >>When using any 2.6 kernel, upto and including 2.6.19 + 20rc1 patch, 
neither of the drives are detected.
 >
 > Not even detected? Interesting...
 >
I recabled the drives so I could install FC6.  Several passes later, 2.6 
required acpi=noirq to enable the HPT370.  Without it, there was no 
output from lspci.

Both drives are detected now.  But the first channel (ide2 -> /dev/hde) 
still refuses to allow dma.  Using hdparm to force the bit on causes bad 
reads.

 > What kind of messages (if any) accompany this slow bring up?

from dmesg:

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT370A: IDE controller at PCI slot 0000:00:0f.0
HPT370A: chipset revision 4
HPT370A: 100% native mode on irq 10
HPT37X: using 33MHz PCI clock
     ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio
HPT37X: using 33MHz PCI clock
     ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:DMA, hdh:pio
Probing IDE interface ide2...
hde: ST3160023A, ATA DISK drive
ide2 at 0xc400-0xc407,0xc802 on irq 10
Probing IDE interface ide3...
hdg: WDC WD1600JB-00GVA0, ATA DISK drive
ide3 at 0xcc00-0xcc07,0xd002 on irq 10hde: max request size: 512KiB
hde: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, 
UDMA(100)
hde: cache flushes supported
  hde:<4>hde: dma_timer_expiry: dma status == 0x21
hde: DMA timeout error
hde: 0 bytes in FIFO
hde: timeout waiting for DMA
hde: dma timeout error: status=0x80 { Busy }
ide: failed opcode was: unknown
hde: DMA disabled
ide2: reset: success
  hde1 hde2 hde3
hdg: max request size: 512KiB
hdg: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, 
UDMA(100)
hdg: cache flushes supported
  hdg: hdg1 hdg2 hdg3

 >     Could you try the driver from the -mm tree -- it's been completely
 > redesigned...

Either 21 or 22 December.

Comment 6 Sergei Shtylyov 2006-12-21 05:20:17 UTC
> I believe this might be connected to #1128.

This actually seems a dupe of the bug #4163.
Comment 7 David Young 2006-12-24 16:08:44 UTC
 >     Could you try the driver from the -mm tree -- it's been completely
 > redesigned...

This does seem to similar, if not a dupe of, #4163.

2.6.20rc1 and 2.6.20rc1-mm1 drivers fail as well.

Both acpi=noirq and pci=biosirq are required to get it to come up at 
all.  But the driver still refuses to work with the master on the first 
bus.  The master on the second bus works fine, full speed, udma5.

I tried the vendors opensource driver but have been unable to get it 
compiled for 2.6.

I am falling back to 2.4.33x to see if I can get some traction on it. 
That path only has me changing the kernel and not the entire distribution.

Thanks, for the encouragement.  More after xmas.

Comment 8 Sergei Shtylyov 2007-01-09 05:18:30 UTC
>>>Most recent kernel where this bug did *NOT* occur:2.4.18

>>I assume that the massive changes made by Sun people in 2.4.19-rc1 are to be
>>blamed then...

    My current suspect is the HPT370 clock turnaround code they removed back 
then...

>>>and two (hde,hdg) by HPT366 (rev 04)

>>That's actually HPT370A chip.

    Note that HPT370 (rev 03) works fine for me.

Comment 9 Bartlomiej Zolnierkiewicz 2007-06-02 16:12:10 UTC
David/Sergei, was there some resolution of this issue?
Comment 10 Sergei Shtylyov 2007-06-03 09:27:53 UTC
> David/Sergei, was there some resolution of this issue?

   Well, I've started comparing 2.6.18 and newer drivers but this got quickly 
preempted...

Comment 11 Natalie Protasevich 2007-07-08 13:38:32 UTC
Any updates on this problem? Is it this there in the recent kernel release?
Thanks.
Comment 12 David Young 2007-07-08 23:42:44 UTC
Subject: Re:  hpt366 does not find drives

I noticed that Sergei Shtylyov put in a patch that looked promising for 
2.6.22 so I will build a kernel and test it this week.

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703
> 
> 
> protasnb@gmail.com changed:
> 
>            What    |Removed                     |Added
> ----------------------------------------------------------------------------
>                  CC|                            |protasnb@gmail.com
> 
> 
> 
> 
> ------- Comment #11 from protasnb@gmail.com  2007-07-08 13:38 -------
> Any updates on this problem? Is it this there in the recent kernel release?
> Thanks.
> 
> 

Comment 13 Sergei Shtylyov 2007-07-09 05:13:19 UTC
(In reply to comment #11)
> Any updates on this problem? Is it this there in the recent kernel release?
> Thanks.

No time to look into this (and no immedialtely accessible h/w too).

(In reply to comment #12)
> Subject: Re:  hpt366 does not find drives

> I noticed that Sergei Shtylyov put in a patch that looked promising for 
> 2.6.22 so I will build a kernel and test it this week.

Don't hold your breath. :-)
Comment 14 David Young 2007-07-24 02:36:59 UTC
Finally tested my server hpt370 with 2.4.34 and 2.6.22 kernels.

Works under 2.4.18
Fails under 2.4.19-2.4.34
Fails under 2.6.*

Standard failure mode is dma expiration and then it slows to a crawl. 
Leaving both drives on ide2 and ide3 basically offline. I can get them 
to run in PIO mode by just waiting it out. It does ide transfers around 
1.5Mb -ish.

I built a series of kernel trees that had only hpt device drivers in it 
and built one (from 2.4.34) that seemed likely. It failed.
I did modify this: #undef HPT_RESET_STATE_ENGINE
It was previously defined.
Failed - hde missed interrupt.

Looks like I am going to have to switch back to a serial console and 
learn how to debug the actual loading the module.

I was able to get FC6 running on the alternate root partition but only
by disabling the hpt module and its ports. Kinda defeats the whole 
server idea.

Next I will try moving the 2.4.18 up through some of the 2.4 kernels and 
see how they survive.

David

bugme-daemon@bugzilla.kernel.org wrote:

> ------- Comment #11 from protasnb@gmail.com  2007-07-08 13:38 -------
> Any updates on this problem? Is it this there in the recent kernel release?
> Thanks.

Comment 15 Sergei Shtylyov 2007-07-24 06:41:04 UTC
(In reply to comment #14)
> Finally tested my server hpt370 with 2.4.34 and 2.6.22 kernels.

> Works under 2.4.18
> Fails under 2.4.19-2.4.34
> Fails under 2.6.*

> I built a series of kernel trees that had only hpt device drivers in it 
> and built one (from 2.4.34) that seemed likely. It failed.
> I did modify this: #undef HPT_RESET_STATE_ENGINE
> It was previously defined.
> Failed - hde missed interrupt.

Very interesting... this disables resetting DMA engine before starting DMA. Could you post dmesg output for this case? (It should have printed hos many bytes are left in the FIFO.)

> Next I will try moving the 2.4.18 up through some of the 2.4 kernels and 
> see how they survive.

Could you clarify this sentense? If you're intending to use 2.4.18 driver in the later kernels, you won't be able to carry it into 2.4.20 directly due to IDE core rewrite being merged at that time...
Comment 16 David Young 2007-07-24 20:59:49 UTC

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703
> 
> 
> 
> 
> 
> ------- Comment #15 from sshtylyov@ru.mvista.com  2007-07-24 06:41 -------
> (In reply to comment #14)

>> Failed - hde missed interrupt.

> Very interesting... this disables resetting DMA engine before starting DMA.
> Could you post dmesg output for this case? (It should have printed hos many
> bytes are left in the FIFO.)

Will do. I just have to wait it out and not mount any of the partitions.

>> Next I will try moving the 2.4.18 up through some of the 2.4 kernels and 
>> see how they survive.
> 
> Could you clarify this sentense? If you're intending to use 2.4.18 driver in
> the later kernels, you won't be able to carry it into 2.4.20 directly due to
> IDE core rewrite being merged at that time...

Well, I guess I won't do that. I didn't recall when the big change was. 
I guess the good news is that it broke before the ide change so I can 
just stick to 2.4.19 and go from there. It will be a day or two before I 
can get back to it.

Comment 17 Sergei Shtylyov 2007-07-25 06:54:41 UTC
(In reply to comment #16)
> >> Next I will try moving the 2.4.18 up through some of the 2.4 kernels and 
> >> see how they survive.
 
> > Could you clarify this sentense? If you're intending to use 2.4.18 driver in
> > the later kernels, you won't be able to carry it into 2.4.20 directly due to

I meant to say "further than 2.4.20". :-/

> > IDE core rewrite being merged at that time...

> Well, I guess I won't do that. I didn't recall when the big change was. 

2.4.21-rc1 I guess.

> I guess the good news is that it broke before the ide change so I can 
> just stick to 2.4.19 and go from there. It will be a day or two before I 

2.4.19 and .20 should be OK for carrying forward the old driver.
Comment 18 Andrew Morton 2007-08-02 16:40:26 UTC
Has David tried using pata_hpt366.c?
Comment 19 David Young 2007-08-02 22:49:33 UTC
I just finished the following tests:

2.4.18 works.

2.4.19 fails (dma_timer_expiry)
2.4.19 with 2.4.18 366 driver: works

2.4.20 fails (dma_timer_expiry)
2.4.20 with 2.4.18 366 driver: works

2.6.22 ide 370: fails dma_timer_expiry status 0x21
2.6.22 ide 370 pci=biosirq: fails as above

2.6.22-37x-pata with pci=biosirq
2.6.22-37x-pata
2.6.22-366-pata with pci=biosirq
2.6.22-366-pata

All fail with cmd a/1 ... 4 or cmd 8/1 ... something (sorry).
	warns about slow port and resets the port multiple times.
	Sometimes it will try to start accessing the drive and
	it is unable to read it correctly. Gives up and reboots.

During boot it sets the HPT370 to UDMA100 and the Via to ATA100. Then it 
will reset the Via to ATA44. Then it cannot figure out which drives exist.

The other ide controller is a VIA8233 and is the default boot channel.
The only way I can boot 2.6.anything is by removing the hpt driver.

--- end of testing ---

If you need more then that then let me know. Additional boot parameters 
are okay since I have grub running one the 2.6 drive.

To capture the output I will have to bring up another system and use the 
serial port to boot with. Just takes time.

bugme-daemon@bugzilla.kernel.org wrote:

---- Comment #18 from akpm@osdl.org  2007-08-02 16:40 -------
> Has David tried using pata_hpt366.c?

Comment 20 Sergei Shtylyov 2007-08-03 06:21:25 UTC
(In reply to comment #19)
> I just finished the following tests:

Thanks for all your testing and sorry for not providing a fix for long months -- this is due to my high load in non-IDE areas and lack of time.

> 2.6.22 ide 370: fails dma_timer_expiry status 0x21
> 2.6.22 ide 370 pci=biosirq: fails as above

pci=biosirq shouldn't have changed anything b/c this is clearly controller/drive issue.

> 2.6.22-37x-pata with pci=biosirq
> 2.6.22-37x-pata
> 2.6.22-366-pata with pci=biosirq
> 2.6.22-366-pata

> All fail with cmd a/1 ... 4 or cmd 8/1 ... something (sorry).
>         warns about slow port and resets the port multiple times.
>         Sometimes it will try to start accessing the drive and
>         it is unable to read it correctly. Gives up and reboots.

What seems to be really strange is that IDE and libata drivers was reported to detect the different PCI clock (for HPT374)

> During boot it sets the HPT370 to UDMA100 and the Via to ATA100. Then it 
> will reset the Via to ATA44. Then it cannot figure out which drives exist.

> If you need more then that then let me know.

Boot logs as usual... :-)

(In reply to comment #0)

> Most recent kernel where this bug did *NOT* occur:2.4.18
> Distribution:redhat 7.2, slackware 10.[1-2] fedora-fc[5-6]
> Hardware Environment:iWill dual pIII Tualatin 1.13G 512K cache 2GbRAM
> four IDE channels on motherboard,

I hope your PCI isn't overclocked. :-)
Comment 21 David Young 2007-08-03 13:26:37 UTC

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703


> 
> What seems to be really strange is that IDE and libata drivers was reported to
> detect the different PCI clock (for HPT374)
It sounds like I did not explain this correctly.
The main ide is a VIA running at 33Mhz.
The raid/secondary ide is the HPT370 version 4 running at 66Mhz.

I don't know how to force the pata to understand that. It finds the HPT 
and then assumes the VIA is at the same speed, which it is not. Then 
hilarity ensues.

>> During boot it sets the HPT370 to UDMA100 and the Via to ATA100. Then it 
>> will reset the Via to ATA44. Then it cannot figure out which drives exist.
> 
>> If you need more then that then let me know.
> 
> Boot logs as usual... :-)

I should have them this weekend.

Comment 22 Sergei Shtylyov 2007-08-03 13:33:02 UTC
(In reply to comment #21)
 
> > What seems to be really strange is that IDE and libata drivers was reported to
> > detect the different PCI clock (for HPT374)
> It sounds like I did not explain this correctly.
> The main ide is a VIA running at 33Mhz.
> The raid/secondary ide is the HPT370 version 4 running at 66Mhz.

Strange again -- HPT370 should *not* support 66 MHz PCI (well, maybe rev. 4 does?). Could you post the output of 'lspci -v'?

> I don't know how to force the pata to understand that. It finds the HPT 
> and then assumes the VIA is at the same speed, which it is not. Then 
> hilarity ensues.

You mean that message from the IDE core stating that it's using 33 MHz bus clock? Disregard it -- hpt366.c driver detects the clock itself. So does the pata_hpt37x.c libata driver.
Comment 23 David Young 2007-08-03 14:43:39 UTC
bugme-daemon@bugzilla.kernel.org wrote:
> 
> Strange again -- HPT370 should *not* support 66 MHz PCI (well, maybe rev. 4
> does?). Could you post the output of 'lspci -v'?
This is an iWill dual Piii server board. The HPT was for onboard raid, 
which I ignore.

lspci -s f.0 -vv:
00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. 
HPT366 (rev 04)
         Subsystem: Triones Technologies, Inc.: Unknown device 0001
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 120 (2000ns min, 2000ns max), cache line size 08
         Interrupt: pin A routed to IRQ 10
         Region 0: I/O ports at c400 [size=8]
         Region 1: I/O ports at c800 [size=4]
         Region 2: I/O ports at cc00 [size=8]
         Region 3: I/O ports at d000 [size=4]
         Region 4: I/O ports at d400 [size=256]
         Expansion ROM at <unassigned> [disabled] [size=128K]
         Capabilities: [60] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

lspci -s 12.0 -vv:
00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller 
(rev 61)
         Subsystem: VIA Technologies, Inc.: Unknown device 0102
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32 (750ns min, 2000ns max), cache line size 08
         Interrupt: pin A routed to IRQ 11
         Region 0: I/O ports at e800 [size=256]
         Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=256]
         Capabilities: [40] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

>> I don't know how to force the pata to understand that. It finds the HPT 
>> and then assumes the VIA is at the same speed, which it is not. Then 
>> hilarity ensues.
> 
> You mean that message from the IDE core stating that it's using 33 MHz bus
> clock? Disregard it -- hpt366.c driver detects the clock itself. So does the
> pata_hpt37x.c libata driver.
>
No, it comes up trying to drive both the VIA and HPT to UDMA/100 support 
and the VIA fails from which it never really recovers.

In the old ide I could force it: ide2=66 ide3=66 hdf=none hdh=none
Then the VIA comes up and defaults to 33 or if I had set all ide to 66 
it would detect the correct clock and use 33 anyway. But still allow the 
HPT to run at 66

Comment 24 Sergei Shtylyov 2007-08-05 06:37:13 UTC
(In reply to comment #23)

> > Strange again -- HPT370 should *not* support 66 MHz PCI (well, maybe rev. 4
> > does?). Could you post the output of 'lspci -v'?

> This is an iWill dual Piii server board. The HPT was for onboard raid, 
> which I ignore.

> lspci -s f.0 -vv:
> 00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. 
> HPT366 (rev 04)
>          Subsystem: Triones Technologies, Inc.: Unknown device 0001
>          Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>          Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>  >TAbort- <TAbort- <MAbort- >SERR- <PERR-

OK, I see it does support 66 MHz but...

> lspci -s 12.0 -vv:
> 00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller 
> (rev 61)
>          Subsystem: VIA Technologies, Inc.: Unknown device 0102
>          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>          Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
>  >TAbort- <TAbort- <MAbort- >SERR- <PERR-

If this VIA chip is on the same PCI bus, this bus *must not* be clocked by 66 MHz because this chip doesn't support it.

> >> I don't know how to force the pata to understand that. It finds the HPT 
> >> and then assumes the VIA is at the same speed, which it is not. Then 
> >> hilarity ensues.

The pata_via driver currently doesn't support anything but 33 MHz.

> In the old ide I could force it: ide2=66 ide3=66 hdf=none hdh=none
> Then the VIA comes up and defaults to 33 or if I had set all ide to 66 
> it would detect the correct clock and use 33 anyway. But still allow the 
> HPT to run at 66

The hpt366 driver does *not* care about ide=nn option. Nor should PCI be running at 66 MHz if VIA and HPT chips are both on it...
Comment 25 Bartlomiej Zolnierkiewicz 2008-02-16 10:40:34 UTC
Is this still a problem with 2.6.25-rc2?
Comment 26 David Young 2008-02-28 00:54:03 UTC
(In reply to comment #25)
> Is this still a problem with 2.6.25-rc2?
> 
I have been trying and failing to isolate the issue from the 2.4 kernels.
I can try the 2.6.25-rc2 in a day or so.
Comment 27 Roland Kletzing 2008-04-30 15:52:27 UTC
any news on this?
Comment 28 Sergei Shtylyov 2008-05-01 10:25:05 UTC
(In reply to comment #27)
> any news on this?

No. Did not find a time to work on it...
Comment 29 Sergei Shtylyov 2009-02-17 16:39:37 UTC
First of all, I'm sorry for not having found enough time to try and deal with
this bug so far (I could have). Unfortunately, I had to move away from the IDE
activity in the past several months...

I now have another analogous bug report from a Russian user who has slightly diferent card that worked in 2.4.18 and isn't working with the recent kernels having the same symptoms. Hopefully, I'll be able to spend some time on investigating this...
Comment 30 Sergei Shtylyov 2009-02-17 18:00:29 UTC
(In reply to comment #29)
> First of all, I'm sorry for not having found enough time to try and deal with
> this bug so far (I could have). Unfortunately, I had to move away from the IDE
> activity in the past several months...
> 
> I now have another analogous bug report from a Russian user who has slightly
> diferent card that worked in 2.4.18 and isn't working with the recent kernels
> having the same symptoms. Hopefully, I'll be able to spend some time on
> investigating this...

To prevent the usual question: no, the libata driver fails to get the DMA working too. Actually, that user has told me that he'd posted the bug report to linux-ide but vger.kernel.org hadn't let it thru.
Comment 31 Sergei Shtylyov 2009-02-18 05:48:15 UTC
David, if you're still interested, could you post the output of 'lspci -xxx' on this controller in 2.6.18 and the recent kernel?
Comment 32 David Young 2009-02-19 00:21:35 UTC
I am interested. The machine hasn't been up for a while but I will 
extract the lspci for 2.6.18. I cannot do that for any newer kernel 
since it does not boot successfully. Thus, the machine not being up.

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703
> 
> 
> 
> 
> 
> ------- Comment #31 from sshtylyov@ru.mvista.com  2009-02-18 05:48 -------
> David, if you're still interested, could you post the output of 'lspci -xxx' on
> this controller in 2.6.18 and the recent kernel?
> 
> 

Comment 33 Sergei Shtylyov 2009-02-19 01:02:35 UTC
(In reply to comment #32)
> I am interested. The machine hasn't been up for a while but I will 
> extract the lspci for 2.6.18.

Opps, I meant to type 2.4.18.

> I cannot do that for any newer kernel since it does not boot successfully.

Er, because of the driver?
Comment 34 Sergei Shtylyov 2009-02-19 01:20:46 UTC
(In reply to comment #14)

Hah, this bug now seems much closer to resoultion than it was yesterday! And it turned out to be so easy...

> I built a series of kernel trees that had only hpt device drivers in it 
> and built one (from 2.4.34) that seemed likely. It failed.
> I did modify this: #undef HPT_RESET_STATE_ENGINE
> It was previously defined.
> Failed - hde missed interrupt.

The Russuian user with HPT370 has just reported that it helped him and DMA started working. So, I can guess that missed interrupt (was it "hde: lost interrupt" msg?) might've been caused by something outside the IDE drivers -- perhaps it's worth trying it with the 'irqpoll' kernel parameter...
Comment 35 David Young 2009-02-19 03:04:53 UTC
<http://bugzilla.kernel.org/show_bug.cgi?id=7703>

> ------- Comment #33 from sshtylyov@ru.mvista.com  2009-02-19 01:02 -------
> (In reply to comment #32)
>> I am interested. The machine hasn't been up for a while but I will 
>> extract the lspci for 2.6.18.
> 
> Opps, I meant to type 2.4.18.
You are correct. Best I had was 2.4.18.5 as I recall.
> 
>> I cannot do that for any newer kernel since it does not boot successfully.
> 
> Er, because of the driver?

Yep, never got a successful boot once the driver was in the kernel. 
Couldn't build a kernel that wouldn't probe the HPT and once that 
happened the system was toast. Hard reboot only way out.

Comment 36 Sergei Shtylyov 2009-02-19 07:30:48 UTC
(In reply to comment #35)

> >> I cannot do that for any newer kernel since it does not boot successfully.

> > Er, because of the driver?

> Yep, never got a successful boot once the driver was in the kernel. 
> Couldn't build a kernel that wouldn't probe the HPT and once that 
> happened the system was toast. Hard reboot only way out.
 
Er, comment #14 suggested that the system remained bootable, though slowly and with the drives in PIO mode. Or I've misinterpreted it?
Comment 37 David Young 2009-02-19 13:16:41 UTC
bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703
> 
> 
> 
> 
> 
> ------- Comment #36 from sshtylyov@ru.mvista.com  2009-02-19 07:30 -------
> (In reply to comment #35)
> 
>>>> I cannot do that for any newer kernel since it does not boot successfully.
> 
>>> Er, because of the driver?

You are correct. Sorry.

Comment 38 David Young 2009-02-25 19:55:42 UTC
Good news, bad news. I have gotten the system powered back on and here 
are the results from a couple of boots. The bad news is that there is no 
drive connected to the HPT as I took the machine out of service when it 
became to much trouble to upgrade. I should have a drive connect later 
tonight and will resend the files.

2.4.18 local version 11
dmesg and lspcixxx

2.4.36.6 local version 1
dmesg and lspcixxx

Interestingly enough, the 36.6 ether driver doesn't work in this setup.

I have never been able to get a 2.6 kernel to boot, primarily because of 
the driver. The distro 2.6 kernels all puked and hung. So I have yet to 
try something newer then the FC5 that is on it.

If the resend is not enough data then I can build a F7 or later drive 
remotely and install it to boot from, thus bypassing the distro hang.

David
Linux version 2.4.18 (dcy@sim.localdomain) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #11 SMP Fri Jun 15 22:49:47 PDT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
 BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
 BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
found SMP MP-table at 000f4f70
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 786416
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 557040 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Kernel command line: BOOT_IMAGE=console ro root=304
Initializing CPU#0
Detected 876.422 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1749.81 BogoMIPS
Memory: 3093056k/3145664k available (1646k kernel code, 52224k reserved, 418k data, 224k init, 2228160k highmem)
Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Buffer-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.02 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1749.81 BogoMIPS
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3499.62 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 003 03  0    0    0   0   0    1    1    51
 06 003 03  0    0    0   0   0    1    1    59
 07 003 03  1    1    0   1   0    1    1    61
 08 003 03  0    0    0   0   0    1    1    69
 09 003 03  0    0    0   0   0    1    1    71
 0a 003 03  1    1    0   1   0    1    1    79
 0b 003 03  1    1    0   1   0    1    1    81
 0c 003 03  1    1    0   1   0    1    1    89
 0d 003 03  0    0    0   0   0    1    1    91
 0e 003 03  0    0    0   0   0    1    1    99
 0f 003 03  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 876.4315 MHz.
..... host bus clock speed is 134.8352 MHz.
cpu: 0, clocks: 1348352, slice: 449450
CPU0<T0:1348352,T1:898896,D:6,S:449450,C:1348352>
cpu: 1, clocks: 1348352, slice: 449450
CPU1<T0:1348352,T1:449440,D:12,S:449450,C:1348352>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [1106/3101] at 00:00.0
PCI->APIC IRQ transform: (B0,I14,P0) -> 12
PCI->APIC IRQ transform: (B0,I15,P0) -> 10
PCI->APIC IRQ transform: (B0,I17,P3) -> 7
PCI->APIC IRQ transform: (B0,I17,P3) -> 7
PCI->APIC IRQ transform: (B0,I17,P3) -> 7
PCI->APIC IRQ transform: (B0,I18,P0) -> 11
PCI->APIC IRQ transform: (B1,I0,P0) -> 11
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.09 <tigran@veritas.com>
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
udf: registering filesystem
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
ACPI: System firmware supports S0 S1 S4 S5
Processor[0]: C0 C1
Processor[1]: C0 C1
ACPI: Power Button (FF) found
ACPI: Multiple power buttons detected, ignoring fixed-feature
ACPI: Power Button (CM) found
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP SERIAL_ACPI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT370A: IDE controller on PCI bus 00 dev 78
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD400BB-00CAA0, ATA DISK drive
hdb: SONY CD-ROM CDU4821, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdb: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda4
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.1.13  Nov-17-2001  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xe800, 00:d0:68:00:4e:dc, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:19:31 Dec 22 2006
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 246k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 224k freed
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
Linux version 2.4.36.6 (dcy@sim.localdomain) (gcc version 2.95.3 20010315 (release)) #1 SMP Wed Feb 25 18:49:18 PST 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
 BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
 BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4f70
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 786416
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 557040 pages.
ACPI: RSDP (v000 VIA694                                    ) @ 0x000f68e0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff6540
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Pentium(tm) Pro APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=2.4.36.6 ro root=304
Initializing CPU#0
Detected 876.422 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1749.81 BogoMIPS
Memory: 3105988k/3145664k available (1311k kernel code, 39292k reserved, 387k data, 288k init, 2228160k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.02 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1749.81 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3499.62 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 876.4283 MHz.
..... host bus clock speed is 134.8348 MHz.
cpu: 0, clocks: 1348348, slice: 449449
CPU0<T0:1348336,T1:898880,D:7,S:449449,C:1348348>
cpu: 1, clocks: 1348348, slice: 449449
CPU1<T0:1348336,T1:449424,D:14,S:449449,C:1348348>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Using IRQ router default [1106/3101] at 00:00.0
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 1!
PCI BIOS passed nonexistent PCI bus 0!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Thermal Zone [THRM] (28 C)
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010830)
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.1.19  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xdc000000, 00:d0:68:00:4e:dc, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 2925M
agpgart: Unsupported Via chipset (device id: 3101), you might want to boot with agp=try_unsupported
agpgart: no supported devices found.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT370A: IDE controller at PCI slot 00:0f.0
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD400BB-00CAA0, ATA DISK drive
hdb: SONY CD-ROM CDU4821, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdb: attached ide-cdrom driver.
hdb: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda4
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 288k freed
Adding Swap: 2097136k swap-space (priority -1)
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3101
00: 06 11 01 31 06 00 10 22 00 00 00 06 00 08 00 00
10: 08 00 00 da 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 18 88 80 82 44 00 00 18 18 88 80 82 44 00 00
50: c8 5e cf 88 c0 0c b0 c0 ee ee 20 40 60 80 90 a0
60: aa aa 00 20 e6 99 40 24 d1 0d 43 50 78 06 00 00
70: 82 c8 00 01 00 01 10 00 00 00 00 00 00 00 02 00
80: 0f 69 00 00 f0 00 00 00 02 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 17 02 00 1f 04 00 00 00 2f 02 14 00
b0: 78 99 18 99 80 00 00 00 80 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00: 06 11 91 b0 07 00 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: 00 d8 f0 d9 00 d0 f0 d7 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
40: 83 c5 60 44 24 72 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00: f6 13 11 01 05 00 10 02 10 00 01 04 00 20 00 00
10: 01 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f6 13 11 01
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0c 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 04)
00: 03 11 04 00 05 00 30 02 04 00 80 01 08 78 00 00
10: 01 c4 00 00 01 c8 00 00 01 cc 00 00 01 d0 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 03 11 01 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 08 08
40: a7 4e 81 06 a7 4e 81 06 a7 4e 81 06 a7 4e 81 06
50: 05 00 00 00 05 00 00 00 1b 00 00 23 24 00 26 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00: 06 11 74 30 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 44 00 f0 20 00 00 00 00 0c 20 00 00 04 00 0a 08
50: c1 18 09 00 00 b0 ac 70 43 10 00 00 00 00 f0 40
60: 00 00 00 00 00 00 02 04 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00
80: 20 80 49 00 02 20 00 00 01 40 00 00 d8 00 00 00
90: 00 db e5 88 90 41 0e 00 00 6b ce 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 03 00 40 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
40: 0b 02 09 3a 18 10 c0 00 a8 a8 20 20 0f 00 ff 20
50: 07 07 e4 e0 14 00 00 00 a8 a8 a8 a8 00 00 00 00
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
80: 00 20 06 04 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c2 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 02 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 00 01 00 c6 00 20 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 61)
00: 06 11 65 30 07 00 10 02 61 00 00 02 08 20 00 00
10: 01 e8 00 00 00 00 00 dc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2)
00: de 10 10 01 07 00 b0 02 b2 00 00 03 00 20 00 00
10: 00 00 00 d8 08 00 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 3d 40
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 43 10 3d 40 02 00 20 00 07 00 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3101
00: 06 11 01 31 06 00 10 22 00 00 00 06 00 08 00 00
10: 08 00 00 da 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 18 88 80 82 44 00 00 18 18 88 80 82 44 00 00
50: c8 5e cf 88 c0 0c b0 c0 ee ee 20 40 60 80 90 a0
60: aa aa 00 20 e6 99 40 24 d1 0d 43 50 78 06 00 00
70: 82 c8 00 01 00 01 10 00 00 00 00 00 00 00 02 00
80: 0f 69 00 00 f0 00 00 00 02 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 17 02 00 1f 04 00 00 00 2f 02 14 00
b0: 78 99 18 99 80 00 00 00 80 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00: 06 11 91 b0 07 00 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: 00 d8 f0 d9 00 d0 f0 d7 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
40: 83 c5 60 44 24 72 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00: f6 13 11 01 05 00 10 02 10 00 01 04 00 20 00 00
10: 01 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f6 13 11 01
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0c 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 04)
00: 03 11 04 00 05 00 30 02 04 00 80 01 08 78 00 00
10: 01 c4 00 00 01 c8 00 00 01 cc 00 00 01 d0 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 03 11 01 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 08 08
40: a7 4e 81 06 a7 4e 81 06 a7 4e 81 06 a7 4e 81 06
50: 05 00 00 00 05 00 00 00 1b 00 00 23 24 00 26 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00: 06 11 74 30 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 44 00 f0 20 00 00 00 00 0c 20 00 00 04 00 0a 08
50: c1 18 09 00 00 00 00 00 43 10 00 00 00 00 f0 40
60: 00 00 00 00 00 00 02 04 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00
80: 20 80 49 00 02 20 00 00 01 40 00 00 d8 00 00 00
90: 00 db e5 88 90 41 0e 00 00 6b cb 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 03 00 40 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
40: 0b 02 09 3a 18 10 c0 00 a8 a8 20 20 0f 00 ff 20
50: 07 07 e4 e0 14 00 00 00 a8 a8 a8 a8 00 00 00 00
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
80: 00 50 4c 03 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c6 00 00 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c6 00 00 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 00 01 00 c2 00 20 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 61)
00: 06 11 65 30 07 00 10 02 61 00 00 02 08 20 00 00
10: 01 e8 00 00 00 00 00 dc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2)
00: de 10 10 01 07 00 b0 02 b2 00 00 03 00 20 00 00
10: 00 00 00 d8 08 00 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 3d 40
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 43 10 3d 40 02 00 20 00 07 00 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Comment 39 David Young 2009-02-26 22:48:23 UTC
Here are the lspci -xxx and dmesg output from 2.4.18 with a drive on HPT 
as /dev/hde and the same from 2.4.36.6. Old worked and newer was less so.

David

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703
> 
Linux version 2.4.18 (dcy@sim.localdomain) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #11 SMP Fri Jun 15 22:49:47 PDT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
 BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
 BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
found SMP MP-table at 000f4f70
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 786416
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 557040 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Kernel command line: BOOT_IMAGE=console ro root=304
Initializing CPU#0
Detected 876.422 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1749.81 BogoMIPS
Memory: 3093056k/3145664k available (1646k kernel code, 52224k reserved, 418k data, 224k init, 2228160k highmem)
Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Buffer-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.02 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1749.81 BogoMIPS
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3499.62 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 003 03  0    0    0   0   0    1    1    51
 06 003 03  0    0    0   0   0    1    1    59
 07 003 03  1    1    0   1   0    1    1    61
 08 003 03  0    0    0   0   0    1    1    69
 09 003 03  0    0    0   0   0    1    1    71
 0a 003 03  1    1    0   1   0    1    1    79
 0b 003 03  1    1    0   1   0    1    1    81
 0c 003 03  1    1    0   1   0    1    1    89
 0d 003 03  0    0    0   0   0    1    1    91
 0e 003 03  0    0    0   0   0    1    1    99
 0f 003 03  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 876.4314 MHz.
..... host bus clock speed is 134.8352 MHz.
cpu: 0, clocks: 1348352, slice: 449450
CPU0<T0:1348352,T1:898896,D:6,S:449450,C:1348352>
cpu: 1, clocks: 1348352, slice: 449450
CPU1<T0:1348352,T1:449440,D:12,S:449450,C:1348352>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [1106/3101] at 00:00.0
PCI->APIC IRQ transform: (B0,I14,P0) -> 12
PCI->APIC IRQ transform: (B0,I15,P0) -> 10
PCI->APIC IRQ transform: (B0,I17,P3) -> 7
PCI->APIC IRQ transform: (B0,I17,P3) -> 7
PCI->APIC IRQ transform: (B0,I17,P3) -> 7
PCI->APIC IRQ transform: (B0,I18,P0) -> 11
PCI->APIC IRQ transform: (B1,I0,P0) -> 11
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.09 <tigran@veritas.com>
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
udf: registering filesystem
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
ACPI: System firmware supports S0 S1 S4 S5
Processor[0]: C0 C1
Processor[1]: C0 C1
ACPI: Power Button (FF) found
ACPI: Multiple power buttons detected, ignoring fixed-feature
ACPI: Power Button (CM) found
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP SERIAL_ACPI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT370A: IDE controller on PCI bus 00 dev 78
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD400BB-00CAA0, ATA DISK drive
hdb: SONY CD-ROM CDU4821, ATAPI CD/DVD-ROM drive
hde: FUJITSU MPF3204AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xc400-0xc407,0xc802 on irq 10
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hde: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63, UDMA(66)
hdb: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda4
 hde: [PTBL] [2491/255/63] hde1 hde2 hde3
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.1.13  Nov-17-2001  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xe800, 00:d0:68:00:4e:dc, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:19:31 Dec 22 2006
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 246k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 224k freed
Adding Swap: 2097136k swap-space (priority -1)
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
Linux version 2.4.36.6 (dcy@sim.localdomain) (gcc version 2.95.3 20010315 (release)) #1 SMP Wed Feb 25 18:49:18 PST 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
 BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
 BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4f70
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 786416
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 557040 pages.
ACPI: RSDP (v000 VIA694                                    ) @ 0x000f68e0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff6540
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Pentium(tm) Pro APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=2.4.36.6 ro root=304
Initializing CPU#0
Detected 876.422 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1749.81 BogoMIPS
Memory: 3105988k/3145664k available (1311k kernel code, 39292k reserved, 387k data, 288k init, 2228160k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.02 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1749.81 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3499.62 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 876.4284 MHz.
..... host bus clock speed is 134.8348 MHz.
cpu: 0, clocks: 1348348, slice: 449449
CPU0<T0:1348336,T1:898880,D:7,S:449449,C:1348348>
cpu: 1, clocks: 1348348, slice: 449449
CPU1<T0:1348336,T1:449424,D:14,S:449449,C:1348348>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Using IRQ router default [1106/3101] at 00:00.0
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 1!
PCI BIOS passed nonexistent PCI bus 0!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Thermal Zone [THRM] (28 C)
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010830)
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.1.19  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xdc000000, 00:d0:68:00:4e:dc, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 2925M
agpgart: Unsupported Via chipset (device id: 3101), you might want to boot with agp=try_unsupported
agpgart: no supported devices found.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT370A: IDE controller at PCI slot 00:0f.0
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD400BB-00CAA0, ATA DISK drive
hdb: SONY CD-ROM CDU4821, ATAPI CD/DVD-ROM drive
hde: FUJITSU MPF3204AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xc400-0xc407,0xc802 on irq 10
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hde: attached ide-disk driver.
hde: host protected area => 1
hde: lost interrupt
hde: lost interrupt
hde: lost interrupt
hde: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63, UDMA(66)
hdb: attached ide-cdrom driver.
hdb: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda4
 hde:<3>hde: lost interrupt
hde: dma_timer_expiry: dma status == 0x21
hde: 0 bytes in FIFO
hde: timeout waiting for DMA
hde: error waiting for DMA
hde: dma timeout retry: status=0xd0 { Busy }

hde: DMA disabled
ide2: reset timed-out, status=0xd0
hde: status timeout: status=0xd0 { Busy }

hde: drive not ready for command
ide2: reset timed-out, status=0xd0
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
 unable to read partition table
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 288k freed
Adding Swap: 2097136k swap-space (priority -1)
end_request: I/O error, dev 21:00 (hde), sector 0
hde: set_drive_speed_status: status=0xd0 { Busy }
hde: set_drive_speed_status: status=0xd0 { Busy }
end_request: I/O error, dev 21:00 (hde), sector 0
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3101
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 8
	Region 0: Memory at da000000 (32-bit, prefetchable) [size=16M]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: d8000000-d9ffffff
	Prefetchable memory behind bridge: d0000000-d7ffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
	Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 12
	Region 0: I/O ports at c000 [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 04)
	Subsystem: Triones Technologies, Inc.: Unknown device 0001
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120 (2000ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at c400 [size=8]
	Region 1: I/O ports at c800 [size=4]
	Region 2: I/O ports at cc00 [size=8]
	Region 3: I/O ports at d000 [size=4]
	Region 4: I/O ports at d400 [size=256]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
	Subsystem: VIA Technologies, Inc.: Unknown device 0000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc. Bus Master IDE
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 4: I/O ports at d800 [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin D routed to IRQ 7
	Region 4: I/O ports at dc00 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin D routed to IRQ 7
	Region 4: I/O ports at e000 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin D routed to IRQ 7
	Region 4: I/O ports at e400 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 61)
	Subsystem: VIA Technologies, Inc.: Unknown device 0102
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (750ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at e800 [size=256]
	Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2) (prog-if 00 [VGA])
	Subsystem: Asustek Computer, Inc.: Unknown device 403d
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 2.0
		Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3101
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 8
	Region 0: Memory at da000000 (32-bit, prefetchable) [size=16M]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: d8000000-d9ffffff
	Prefetchable memory behind bridge: d0000000-d7ffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
	Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 12
	Region 0: I/O ports at c000 [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 04)
	Subsystem: Triones Technologies, Inc.: Unknown device 0001
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120 (2000ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at c400 [size=8]
	Region 1: I/O ports at c800 [size=4]
	Region 2: I/O ports at cc00 [size=8]
	Region 3: I/O ports at d000 [size=4]
	Region 4: I/O ports at d400 [size=256]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
	Subsystem: VIA Technologies, Inc.: Unknown device 0000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc. Bus Master IDE
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 4: I/O ports at d800 [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin D routed to IRQ 7
	Region 4: I/O ports at dc00 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin D routed to IRQ 7
	Region 4: I/O ports at e000 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin D routed to IRQ 7
	Region 4: I/O ports at e400 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 61)
	Subsystem: VIA Technologies, Inc.: Unknown device 0102
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (750ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at e800 [size=256]
	Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2) (prog-if 00 [VGA])
	Subsystem: Asustek Computer, Inc.: Unknown device 403d
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 2.0
		Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3101
00: 06 11 01 31 06 00 10 22 00 00 00 06 00 08 00 00
10: 08 00 00 da 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 18 88 80 82 44 00 00 18 18 88 80 82 44 00 00
50: c8 5e cf 88 c0 0c b0 c0 ee ee 20 40 60 80 90 a0
60: aa aa 0a 20 e6 99 40 24 f0 0d 43 50 78 06 00 00
70: 82 c8 00 01 00 01 10 00 00 00 00 00 00 00 02 00
80: 0f 41 00 00 f0 00 00 00 02 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 17 02 00 1f 04 00 00 00 2f 02 14 00
b0: 78 99 18 99 80 00 00 00 80 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00: 06 11 91 b0 07 00 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: 00 d8 f0 d9 00 d0 f0 d7 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
40: 83 c5 60 44 24 72 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00: f6 13 11 01 05 00 10 02 10 00 01 04 00 20 00 00
10: 01 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f6 13 11 01
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0c 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 04)
00: 03 11 04 00 05 00 30 02 04 00 80 01 08 78 00 00
10: 01 c4 00 00 01 c8 00 00 01 cc 00 00 01 d0 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 03 11 01 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 08 08
40: 31 4e 45 16 a7 4e 81 06 a7 4e 81 06 a7 4e 81 06
50: 05 00 00 00 05 00 00 00 1b 00 00 22 24 00 26 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 93 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00: 06 11 74 30 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 44 00 f0 00 00 00 00 00 0c 20 00 00 04 00 0a 08
50: c1 18 09 00 00 b0 ac 70 43 10 00 00 00 00 f0 40
60: 00 00 00 00 00 00 02 04 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00
80: 20 80 49 00 02 20 00 00 01 40 00 00 d8 00 00 00
90: 00 db e1 88 90 40 0e 00 00 67 cf 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 03 00 40 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
40: 0b 02 09 3a 18 10 c0 00 a8 a8 20 20 0f 00 ff 20
50: 07 07 e4 e0 14 00 00 00 a8 a8 a8 a8 00 00 00 00
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
80: 00 20 06 04 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c6 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c2 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 00 01 00 c2 00 00 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 61)
00: 06 11 65 30 07 00 10 02 61 00 00 02 08 20 00 00
10: 01 e8 00 00 00 00 00 dc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2)
00: de 10 10 01 07 00 b0 02 b2 00 00 03 00 20 00 00
10: 00 00 00 d8 08 00 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 3d 40
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 43 10 3d 40 02 00 20 00 07 00 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3101
00: 06 11 01 31 06 00 10 22 00 00 00 06 00 08 00 00
10: 08 00 00 da 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 18 88 80 82 44 00 00 18 18 88 80 82 44 00 00
50: c8 5e cf 88 c0 0c b0 c0 ee ee 20 40 60 80 90 a0
60: aa aa 0a 20 e6 99 40 24 d1 0d 43 50 78 06 00 00
70: 82 c8 00 01 00 01 10 00 00 00 00 00 00 00 00 02
80: 0f 61 00 00 f0 00 00 00 02 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 17 02 00 1f 04 00 00 00 2f 02 14 00
b0: 78 99 18 99 80 00 00 00 80 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00: 06 11 91 b0 07 00 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: 00 d8 f0 d9 00 d0 f0 d7 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
40: 83 c5 60 44 24 72 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00: f6 13 11 01 05 00 10 02 10 00 01 04 00 20 00 00
10: 01 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f6 13 11 01
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0c 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 04)
00: 03 11 04 00 05 00 30 02 04 00 80 01 08 78 00 00
10: 01 c4 00 00 01 c8 00 00 01 cc 00 00 01 d0 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 03 11 01 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 08 08
40: 31 62 44 12 a7 4e 81 06 a7 4e 81 06 a7 4e 81 06
50: 05 01 00 00 05 00 00 00 1b 00 00 23 24 00 26 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00: 06 11 74 30 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 44 00 f0 00 00 00 00 00 0c 20 00 00 04 00 0a 08
50: c1 18 09 00 00 00 00 00 43 10 00 00 00 00 f0 40
60: 00 00 00 00 00 00 02 04 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00
80: 20 80 49 00 02 20 00 00 01 40 00 00 d8 00 00 00
90: 00 db e1 88 90 40 0e 00 00 67 cd 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 03 00 40 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
40: 0b 02 09 3a 18 10 c0 00 a8 a8 20 20 0f 00 ff 20
50: 07 07 e4 e0 14 00 00 00 a8 a8 a8 a8 00 00 00 00
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
80: 00 50 4c 03 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c6 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c2 00 00 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 00 01 00 c2 00 00 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 61)
00: 06 11 65 30 07 00 10 02 61 00 00 02 08 20 00 00
10: 01 e8 00 00 00 00 00 dc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2)
00: de 10 10 01 07 00 b0 02 b2 00 00 03 00 20 00 00
10: 00 00 00 d8 08 00 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 3d 40
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 43 10 3d 40 02 00 20 00 07 00 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Comment 40 Sergei Shtylyov 2009-02-28 01:30:19 UTC
(In reply to comment #34)
> (In reply to comment #14)
> 
> Hah, this bug now seems much closer to resoultion than it was yesterday! And it
> turned out to be so easy...
> 
> > I built a series of kernel trees that had only hpt device drivers in it 
> > and built one (from 2.4.34) that seemed likely. It failed.
> > I did modify this: #undef HPT_RESET_STATE_ENGINE
> > It was previously defined.
> > Failed - hde missed interrupt.

> The Russuian user with HPT370 has just reported that it helped him and DMA
> started working. So, I can guess that missed interrupt (was it "hde: lost
> interrupt" msg?) might've been caused by something outside the IDE drivers --
> perhaps it's worth trying it with the 'irqpoll' kernel parameter...

David, have you tried this?
Comment 41 David Young 2009-02-28 04:13:25 UTC
I don't seem to find irqpoll as an option in kernel-parameters.txt, is 
there some place to look? I figured it was a acpi= or pci= option but I 
did know which one.

The documented acpi=noirq doesn't work for what that is worth.

David

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703
> 
> 
> 
> 
> 
> ------- Comment #40 from sshtylyov@ru.mvista.com  2009-02-28 01:30 -------
> (In reply to comment #34)
>> (In reply to comment #14)
>>
>> Hah, this bug now seems much closer to resoultion than it was yesterday! And it
>> turned out to be so easy...
>>
>>> I built a series of kernel trees that had only hpt device drivers in it 
>>> and built one (from 2.4.34) that seemed likely. It failed.
>>> I did modify this: #undef HPT_RESET_STATE_ENGINE
>>> It was previously defined.
>>> Failed - hde missed interrupt.
> 
>> The Russuian user with HPT370 has just reported that it helped him and DMA
>> started working. So, I can guess that missed interrupt (was it "hde: lost
>> interrupt" msg?) might've been caused by something outside the IDE drivers --
>> perhaps it's worth trying it with the 'irqpoll' kernel parameter...
> 
> David, have you tried this?
> 
> 

Comment 42 David Young 2009-02-28 05:08:53 UTC
Results from acpi=noirq

fails with:

hde: lost interrupt

Partition check:
  hda: hda1 hda2 hda4
  hde:<3>hde: lost interrupt
hde: dma_timer_expiry: dma status == 0x21
hde: 0 bytes in FIFO
hde: timeout waiting for DMA
hde: error waiting for DMA
hde: dma timeout retry: status=0xd0 { Busy }

hde: DMA disabled

Have to cycle the power to get the drive to be recognized by the HPT on 
boot up.

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703
> 
Linux version 2.4.36.6 (dcy@sim.localdomain) (gcc version 2.95.3 20010315 (release)) #1 SMP Wed Feb 25 18:49:18 PST 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
 BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
 BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4f70
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 786416
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 557040 pages.
ACPI: RSDP (v000 VIA694                                    ) @ 0x000f68e0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff6540
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Pentium(tm) Pro APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=.36.6.noirq ro root=304 acpi=noirq
Initializing CPU#0
Detected 876.422 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1749.81 BogoMIPS
Memory: 3105988k/3145664k available (1311k kernel code, 39292k reserved, 387k data, 288k init, 2228160k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.02 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1749.81 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3499.62 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 876.4262 MHz.
..... host bus clock speed is 134.8345 MHz.
cpu: 0, clocks: 1348345, slice: 449448
CPU0<T0:1348336,T1:898880,D:8,S:449448,C:1348345>
cpu: 1, clocks: 1348345, slice: 449448
CPU1<T0:1348336,T1:449440,D:0,S:449448,C:1348345>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Using IRQ router default [1106/3101] at 00:00.0
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 1!
PCI BIOS passed nonexistent PCI bus 0!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Thermal Zone [THRM] (30 C)
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010830)
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.1.19  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xdc000000, 00:d0:68:00:4e:dc, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 2925M
agpgart: Unsupported Via chipset (device id: 3101), you might want to boot with agp=try_unsupported
agpgart: no supported devices found.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT370A: IDE controller at PCI slot 00:0f.0
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD400BB-00CAA0, ATA DISK drive
hdb: SONY CD-ROM CDU4821, ATAPI CD/DVD-ROM drive
hde: FUJITSU MPF3204AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xc400-0xc407,0xc802 on irq 10
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hde: attached ide-disk driver.
hde: host protected area => 1
hde: lost interrupt
hde: lost interrupt
hde: lost interrupt
hde: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63, UDMA(66)
hdb: attached ide-cdrom driver.
hdb: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda4
 hde:<3>hde: lost interrupt
hde: dma_timer_expiry: dma status == 0x21
hde: 0 bytes in FIFO
hde: timeout waiting for DMA
hde: error waiting for DMA
hde: dma timeout retry: status=0xd0 { Busy }

hde: DMA disabled
ide2: reset timed-out, status=0xd0
hde: status timeout: status=0xd0 { Busy }

hde: drive not ready for command
ide2: reset timed-out, status=0xd0
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
 unable to read partition table
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 288k freed
Adding Swap: 2097136k swap-space (priority -1)
end_request: I/O error, dev 21:00 (hde), sector 0
hde: set_drive_speed_status: status=0xd0 { Busy }
hde: set_drive_speed_status: status=0xd0 { Busy }
end_request: I/O error, dev 21:00 (hde), sector 0
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3101
00: 06 11 01 31 06 00 10 22 00 00 00 06 00 08 00 00
10: 08 00 00 da 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 18 88 80 82 44 00 00 18 18 88 80 82 44 00 00
50: c8 5e cf 88 c0 0c b0 c0 ee ee 20 40 60 80 90 a0
60: aa aa 0a 20 e6 99 40 24 d1 0d 43 50 78 06 00 00
70: 82 c8 00 01 00 01 10 00 00 00 00 00 00 00 02 00
80: 0f 61 00 00 f0 00 00 00 02 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 17 02 00 1f 04 00 00 00 2f 02 14 00
b0: 78 99 18 99 80 00 00 00 80 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00: 06 11 91 b0 07 00 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: 00 d8 f0 d9 00 d0 f0 d7 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
40: 83 c5 60 44 24 72 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00: f6 13 11 01 05 00 10 02 10 00 01 04 00 20 00 00
10: 01 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f6 13 11 01
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0c 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 04)
00: 03 11 04 00 05 00 30 02 04 00 80 01 08 78 00 00
10: 01 c4 00 00 01 c8 00 00 01 cc 00 00 01 d0 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 03 11 01 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 08 08
40: 31 62 44 12 a7 4e 81 06 a7 4e 81 06 a7 4e 81 06
50: 05 01 00 00 05 00 00 00 1b 00 00 23 24 00 26 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00: 06 11 74 30 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 44 00 f0 00 00 00 00 00 0c 20 00 00 04 00 0a 08
50: c1 18 09 00 00 00 00 00 43 10 00 00 00 00 f0 40
60: 00 00 00 00 00 00 02 04 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00
80: 20 80 49 00 02 20 00 00 01 40 00 00 d8 00 00 00
90: 00 da e1 88 90 41 0e 00 00 6b cf 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 03 00 40 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
40: 0b 02 09 3a 18 10 c0 00 a8 a8 20 20 0f 00 ff 20
50: 07 07 e4 e0 14 00 00 00 a8 a8 a8 a8 00 00 00 00
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
80: 00 50 4c 03 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c2 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c6 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 00 01 00 c6 00 00 40 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 61)
00: 06 11 65 30 07 00 10 02 61 00 00 02 08 20 00 00
10: 01 e8 00 00 00 00 00 dc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2)
00: de 10 10 01 07 00 b0 02 b2 00 00 03 00 20 00 00
10: 00 00 00 d8 08 00 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 3d 40
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 43 10 3d 40 02 00 20 00 07 00 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Comment 43 David Young 2009-02-28 05:10:18 UTC
And here are the results with acpi=irqpoll

Same errors including having to cycle the power.

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703

Linux version 2.4.36.6 (dcy@sim.localdomain) (gcc version 2.95.3 20010315 (release)) #1 SMP Wed Feb 25 18:49:18 PST 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
 BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
 BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4f70
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 786416
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 557040 pages.
ACPI: RSDP (v000 VIA694                                    ) @ 0x000f68e0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff6540
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Pentium(tm) Pro APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=.36.6.irqpoll ro root=304 acpi=irqpoll
Initializing CPU#0
Detected 876.399 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1749.81 BogoMIPS
Memory: 3105988k/3145664k available (1311k kernel code, 39292k reserved, 387k data, 288k init, 2228160k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.02 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1749.81 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3499.62 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 876.4273 MHz.
..... host bus clock speed is 134.8347 MHz.
cpu: 0, clocks: 1348347, slice: 449449
CPU0<T0:1348336,T1:898880,D:7,S:449449,C:1348347>
cpu: 1, clocks: 1348347, slice: 449449
CPU1<T0:1348336,T1:449424,D:14,S:449449,C:1348347>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Using IRQ router default [1106/3101] at 00:00.0
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 1!
PCI BIOS passed nonexistent PCI bus 0!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Thermal Zone [THRM] (31 C)
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010830)
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.1.19  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xdc000000, 00:d0:68:00:4e:dc, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 2925M
agpgart: Unsupported Via chipset (device id: 3101), you might want to boot with agp=try_unsupported
agpgart: no supported devices found.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT370A: IDE controller at PCI slot 00:0f.0
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD400BB-00CAA0, ATA DISK drive
hdb: SONY CD-ROM CDU4821, ATAPI CD/DVD-ROM drive
hde: FUJITSU MPF3204AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xc400-0xc407,0xc802 on irq 10
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hde: attached ide-disk driver.
hde: host protected area => 1
hde: lost interrupt
hde: lost interrupt
hde: lost interrupt
hde: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63, UDMA(66)
hdb: attached ide-cdrom driver.
hdb: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda4
 hde:<3>hde: lost interrupt
hde: dma_timer_expiry: dma status == 0x21
hde: 0 bytes in FIFO
hde: timeout waiting for DMA
hde: error waiting for DMA
hde: dma timeout retry: status=0xd0 { Busy }

hde: DMA disabled
ide2: reset timed-out, status=0xd0
hde: status timeout: status=0xd0 { Busy }

hde: drive not ready for command
ide2: reset timed-out, status=0xd0
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
 unable to read partition table
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 288k freed
Adding Swap: 2097136k swap-space (priority -1)
end_request: I/O error, dev 21:00 (hde), sector 0
hde: set_drive_speed_status: status=0xd0 { Busy }
hde: set_drive_speed_status: status=0xd0 { Busy }
end_request: I/O error, dev 21:00 (hde), sector 0
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3101
00: 06 11 01 31 06 00 10 22 00 00 00 06 00 08 00 00
10: 08 00 00 da 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 18 88 80 82 44 00 00 18 18 88 80 82 44 00 00
50: c8 5e cf 88 c0 0c b0 c0 ee ee 20 40 60 80 90 a0
60: aa aa 0a 20 e6 99 40 24 f0 0d 43 50 78 06 00 00
70: 82 c8 00 01 00 01 10 00 00 00 00 00 00 00 02 00
80: 0f 49 00 00 f0 00 00 00 02 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 17 02 00 1f 04 00 00 00 2f 02 14 00
b0: 78 99 18 99 80 00 00 00 80 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00: 06 11 91 b0 07 00 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: 00 d8 f0 d9 00 d0 f0 d7 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
40: 83 c5 60 44 24 72 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00: f6 13 11 01 05 00 10 02 10 00 01 04 00 20 00 00
10: 01 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f6 13 11 01
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0c 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 04)
00: 03 11 04 00 05 00 30 02 04 00 80 01 08 78 00 00
10: 01 c4 00 00 01 c8 00 00 01 cc 00 00 01 d0 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 03 11 01 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 08 08
40: 31 62 44 12 a7 4e 81 06 a7 4e 81 06 a7 4e 81 06
50: 05 01 00 00 05 00 00 00 1b 00 00 23 24 00 26 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 93 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00: 06 11 74 30 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 44 00 f0 20 00 00 00 00 0c 20 00 00 04 00 0a 08
50: c1 18 09 00 00 00 00 00 43 10 00 00 00 00 f0 40
60: 00 00 00 00 00 00 02 04 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00
80: 20 80 49 00 02 20 00 00 01 40 00 00 d8 00 00 00
90: 00 db e5 88 90 40 0e 00 00 6b cf 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 03 00 40 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
40: 0b 02 09 3a 18 10 c0 00 a8 a8 20 20 0f 00 ff 20
50: 07 07 e4 e0 14 00 00 00 a8 a8 a8 a8 00 00 00 00
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
80: 00 50 4c 03 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c6 00 00 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 10 07 00 c6 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00
40: 00 00 01 00 c6 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 61)
00: 06 11 65 30 07 00 10 02 61 00 00 02 08 20 00 00
10: 01 e8 00 00 00 00 00 dc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2)
00: de 10 10 01 07 00 b0 02 b2 00 00 03 00 20 00 00
10: 00 00 00 d8 08 00 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 3d 40
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 43 10 3d 40 02 00 20 00 07 00 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Comment 44 Sergei Shtylyov 2009-03-01 09:25:25 UTC
(In reply to comment #41)
> I don't seem to find irqpoll as an option in kernel-parameters.txt, is 
> there some place to look?

Hm, it's there in the recent kernels -- since 2.6.12, actually.
Comment 45 Sergei Shtylyov 2009-03-01 09:26:54 UTC
(In reply to comment #44)
> (In reply to comment #41)
> > I don't seem to find irqpoll as an option in kernel-parameters.txt, is 
> > there some place to look?

> Hm, it's there in the recent kernels -- since 2.6.12, actually.

Please try recent kernels, otherwise we'll be just wasting time, it seems.
Comment 46 Sergei Shtylyov 2009-03-01 10:29:44 UTC
(In reply to comment #43)
> And here are the results with acpi=irqpoll

> Same errors including having to cycle the power.

No wonder -- there's no such option as acpi=irqpoll, even in 2.4...
Comment 47 David Young 2009-03-01 15:27:42 UTC
One to comment to include them all.

The 2.6 kernels have never exactly run on the system. If the kernel 
"ran" it did so very slowly and with crashes, hangs and freezes.

I cannot get a successful installation of a modern distro from fedora 7 
onward and Slackware 12 onward. The distro supplied kernels die as soon 
as the HPT is discovered. I tried building my own kernel to use in my 
own installation but it has a low ROI as the server was replaced for one 
without HPT.

I can re-setup to run a serial console and see what I can trace during 
boot and respin a distro with a specific kernel that is at least 2.6.12.

What version gcc do you want me to use and which kernel specifically?

bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=7703
> 
> 
> 
> 
> 
> ------- Comment #46 from sshtylyov@ru.mvista.com  2009-03-01 10:29 -------
> (In reply to comment #43)
>> And here are the results with acpi=irqpoll
> 
>> Same errors including having to cycle the power.
> 
> No wonder -- there's no such option as acpi=irqpoll, even in 2.4...
> 
> 

Comment 48 Sergei Shtylyov 2009-03-02 00:41:45 UTC
(In reply to comment #47)
> One to comment to include them all.

> The 2.6 kernels have never exactly run on the system. If the kernel 
> "ran" it did so very slowly and with crashes, hangs and freezes.

Hm...

> I can re-setup to run a serial console and see what I can trace during 
> boot and respin a distro with a specific kernel that is at least 2.6.12.

> What version gcc do you want me to use and which kernel specifically?

No specific requirement other than irqpoll option support. Plus you need to comment out #define HPT_RESET_STATE_ENGINE as I now believe it's a cuplrit that caused this post-2.4.18 regression.

Comment 49 Sergei Shtylyov 2009-03-23 13:36:19 UTC
Any news on this?
Comment 50 David Young 2009-04-03 10:48:09 UTC
> Any news on this?
> 
Yes. I finally got a slackware 12.1 system built. I just finished a few 
minutes ago so I should have data over the weekend.
Comment 51 David Young 2009-04-04 02:37:35 UTC
A custom 2.6.28 kernel booted and ran with a drive connected to the HPT, 
which previously would crash.

HPT_RESET_DMA_ENGINE was commented out. I did double check with it 
enabled and the dma timeouts were still there.

Let me know if there is something else that you need. Like testing the 
ATA version which has failed previously and doesn't seem to have 
HPT_RESET_DMA_ENGINE.

The hdc files are 2.6.28 without a drive on the HPT.
The hde files have a drive on HPT.
System was booted from hda while root was on hdc.

David
Comment 52 Sergei Shtylyov 2009-04-06 20:51:25 UTC
(In reply to comment #51)

> A custom 2.6.28 kernel booted and ran with a drive connected to the HPT, 
> which previously would crash.

> HPT_RESET_DMA_ENGINE was commented out. I did double check with it 
> enabled and the dma timeouts were still there.

Thanks for your efforts/patience. The bug is fast moving to resolution now.

> Let me know if there is something else that you need. Like testing the 
> ATA version which has failed previously and doesn't seem to have 
> HPT_RESET_DMA_ENGINE.

You can try commenting out the following lines from hpt370_bmdma_start() in drivers/ata/pata_hpt37x.c:

         pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
         udelay(10);

That should help.

> The hdc files are 2.6.28 without a drive on the HPT.
> The hde files have a drive on HPT.
> System was booted from hda while root was on hdc.

I'm not quite sure what this comment was to, maybe some log you haven't attached? :-)
Comment 53 David Young 2009-04-06 21:27:59 UTC
> You can try commenting out the following lines from hpt370_bmdma_start() in
> drivers/ata/pata_hpt37x.c:
> 
>          pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
>          udelay(10);
> 
> That should help.

Okay, I will let you know.

> 
>> The hdc files are 2.6.28 without a drive on the HPT.
>> The hde files have a drive on HPT.
>> System was booted from hda while root was on hdc.
> 
> I'm not quite sure what this comment was to, maybe some log you haven't
> attached? :-)

The system has three drives available; hda,hdc & hde. My old FC5 2.4.18 
system is on hda. The hdc has slackware 12.1 with the custom kernel and 
no hde. The hde version had the drive actually connected. The only way I 
could access the system before was to disconnect the drives from the HPT 
(hd[efgh]). So this is better.

Thanks.
Comment 54 David Young 2009-04-08 04:54:34 UTC
>> You can try commenting out the following lines from hpt370_bmdma_start() in
>> drivers/ata/pata_hpt37x.c:
>>
>>          pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
>>          udelay(10);
>>

That fixed the pata code.

Thanks.
Comment 55 Sergei Shtylyov 2009-04-19 09:33:04 UTC
Patches have been merged to both IDE and libata drivers.
Comment 56 Sergei Shtylyov 2010-03-27 11:32:09 UTC
This bug should have been closed...

Note You need to log in before you can comment on or make changes to this bug.