Bug 7473 - DVB-T Pluto2 && PCI: When playing in dmesg I often getts: "pluto2 0000:03:00.0: overflow irq (10)"
DVB-T Pluto2 && PCI: When playing in dmesg I often getts: "pluto2 0000:03:00....
Status: CLOSED OBSOLETE
Product: v4l-dvb
Classification: Unclassified
Component: dvb-other
i386 Linux
: P2 normal
Assigned To: Andreas Oberritter
:
Depends on:
Blocks:
  Show dependency treegraph
 
Reported: 2006-11-08 12:54 UTC by Cijoml Cijomlovic Cijomlov
Modified: 2012-05-12 01:46 UTC (History)
4 users (show)

See Also:
Kernel Version: 2.6.23.11
Tree: Mainline
Regression: No


Attachments
/proc/config.gz (13.05 KB, application/x-gzip)
2007-06-24 01:04 UTC, Cijoml Cijomlovic Cijomlov
Details

Description Cijoml Cijomlovic Cijomlov 2006-11-08 12:54:12 UTC
Most recent kernel where this bug did not occur:
Distribution: Debian Testing
Hardware Environment: Acer TravelMate
Software Environment: Kaffeine, kernel, MPlayer
Problem Description: 

Jan 13 20:50:52 notas kernel: pluto2 0000:03:00.0: overflow irq (10)
Jan 13 20:50:53 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 20:50:56 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 20:50:56 notas kernel: pluto2 0000:03:00.0: overflow irq (8)
Jan 13 20:50:57 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 20:50:57 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 20:50:57 notas kernel: pluto2 0000:03:00.0: overflow irq (8)
Jan 13 20:51:00 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 20:51:05 notas kernel: pluto2 0000:03:00.0: overflow irq (9)
Jan 13 20:51:08 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:04 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:13 notas kernel: pluto2 0000:03:00.0: overflow irq (11)
Jan 13 22:51:13 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:21 notas kernel: pluto2 0000:03:00.0: overflow irq (11)
Jan 13 22:51:21 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:22 notas kernel: pluto2 0000:03:00.0: overflow irq (11)
Jan 13 22:51:24 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:25 notas kernel: pluto2 0000:03:00.0: overflow irq (11)
Jan 13 22:51:25 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:25 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:25 notas kernel: pluto2 0000:03:00.0: overflow irq (10)
Jan 13 22:51:28 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:28 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:28 notas kernel: pluto2 0000:03:00.0: overflow irq (12)
Jan 13 22:51:29 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:29 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:29 notas kernel: pluto2 0000:03:00.0: overflow irq (11)
Jan 13 22:51:29 notas kernel: pluto2 0000:03:00.0: overflow irq (1)
Jan 13 22:51:29 notas kernel: pluto2 0000:03:00.0: overflow irq (1)

And video and sound goes bad...

Steps to reproduce:

Start plays video stream
Comment 1 Cijoml Cijomlovic Cijomlov 2007-04-03 06:21:11 UTC
Hi,

tested with today's SVN v4l-dvb-f21b24ec4e8f

and problem still occurs

Also still getting errors to /proc/interrupts

notas:/usr/src/v4l-dvb-f21b24ec4e8f# cat /proc/interrupts
           CPU0
  0:   24814973    XT-PIC-XT        timer
  1:       2362    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  4:     123862    XT-PIC-XT        irda0
  5:          4    XT-PIC-XT        parport0
  6:          5    XT-PIC-XT        floppy
  8:          1    XT-PIC-XT        rtc
  9:      30412    XT-PIC-XT        acpi
 10:    5157847    XT-PIC-XT        yenta, yenta, uhci_hcd:usb3, wifi0, Intel
82801DB-ICH4 Modem, Intel 82801DB-ICH4, pluto2
 11:    3335200    XT-PIC-XT        uhci_hcd:usb1, uhci_hcd:usb2, ehci_hcd:usb4,
i915@pci:0000:00:02.0
 12:     222115    XT-PIC-XT        i8042
 14:      56675    XT-PIC-XT        ide0
 15:     217132    XT-PIC-XT        ide1
NMI:      13055
LOC:   24817401
ERR:       5948
^^^^^^^^^^^^^^^^
MIS:          0

dmesg:

pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.0 to 64
DVB: registering new adapter (pluto2).
pluto2 0000:02:00.0: board revision 2.15
pluto2 0000:02:00.0: S/N 13320420103842
pluto2 0000:02:00.0: MAC 00:d0:16:01:5c:0c
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: found firmware revision 29 -- ok
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
spurious 8259A interrupt: IRQ7.
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
pluto2 0000:02:00.0: overflow irq (1)
Comment 2 Cijoml Cijomlovic Cijomlov 2007-05-23 11:12:59 UTC
I made test based at itop -a

at the beginning:
ERR:      27355

itop output with time output
INT                NAME          RATE             MAX
  0 [             timer]   523 Ints/s     (max:   529)
  1 [             i8042]     0 Ints/s     (max:     1)
  2 [           cascade]     0 Ints/s     (max:     0)
  8 [               rtc]     0 Ints/s     (max:     0)
  9 [   acpi, Intel 828]    52 Ints/s     (max:    53)
 11 [   yenta, yenta, u]   377 Ints/s     (max:   588)
 12 [             i8042]     0 Ints/s     (max:     0)
 14 [              ide0]     0 Ints/s     (max:    17)
 15 [              ide1]     0 Ints/s     (max:    18)


real    0m30.483s
user    0m0.005s
sys     0m0.005s

errors at the end
ERR:      30449
Comment 3 Cijoml Cijomlovic Cijomlov 2007-05-23 11:38:59 UTC
And much longer time:

beginning ERR:     110894

INT                NAME          RATE             MAX
  0 [             timer]   531 Ints/s     (max:   638)
  1 [             i8042]     0 Ints/s     (max:     4)
  2 [           cascade]     0 Ints/s     (max:     0)
  8 [               rtc]     0 Ints/s     (max:     0)
  9 [   acpi, Intel 828]    53 Ints/s     (max:    67)
 11 [   yenta, yenta, u]   499 Ints/s     (max:   753)
 12 [             i8042]   458 Ints/s     (max:   464)
 14 [              ide0]     0 Ints/s     (max:    27)
 15 [              ide1]     0 Ints/s     (max:    18)


real    19m1.107s
user    0m0.118s
sys     0m0.227s


end ERR:     249003
Comment 4 Natalie Protasevich 2007-06-21 21:24:23 UTC
It looks like it was booted with noapic, was there a reason?
Can you provide a boot trace and lspci -vv output for you system please.
Comment 5 Cijoml Cijomlovic Cijomlov 2007-06-23 23:33:23 UTC
APIC is enabled - why do you think it is disabled?
-------
Listik:/home/listicka# dmesg|grep -i apic
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
APIC calibration not consistent with PM Timer: 261ms instead of 100ms
APIC delta adjusted to PM-Timer: 625021 (1637309)
-------
Tested with dvb-Mercurial-b03a5545f8e1 and problem is still present :(
Comment 6 Natalie Protasevich 2007-06-23 23:48:10 UTC
Because your interrupts are going through the PIC (I mean IO, not local apic). Your system probably doesn't have IO-APIC then? The boot trace is needed to see details of your chipset. The dmidecode output would be good to have also.
Comment 7 Cijoml Cijomlovic Cijomlov 2007-06-24 01:03:23 UTC
Sending output for my second laptop

Listik:/home/listicka# lspci -vv
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 21)
        Subsystem: Intel Corporation 82855PM Processor to I/O Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: [e4] Vendor Specific Information
        Capabilities: [a0] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1

00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 21) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00009000-0000bfff
        Memory behind bridge: ffc00000-ffcfffff
        Prefetchable memory behind bridge: ceb00000-deafffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Uniwill Computer Corp Unknown device 9023
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 4: I/O ports at e800 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Uniwill Computer Corp Unknown device 9023
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at e880 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Uniwill Computer Corp Unknown device 9023
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 11
        Region 4: I/O ports at ec00 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
        Subsystem: Uniwill Computer Corp Unknown device 9023
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 11
        Region 0: Memory at ffeffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=0a, sec-latency=64
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: ffd00000-ffdfffff
        Prefetchable memory behind bridge: 50000000-57ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Uniwill Computer Corp Unknown device 9023
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Region 5: Memory at 58000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
        Subsystem: Uniwill Computer Corp Unknown device 9023
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 9
        Region 4: I/O ports at 0540 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
        Subsystem: Uniwill Computer Corp Unknown device 8402
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 9
        Region 0: I/O ports at d800 [size=256]
        Region 1: I/O ports at e000 [size=64]
        Region 2: Memory at ffeff800 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at ffeff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
        Subsystem: Uniwill Computer Corp Unknown device 4007
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 9
        Region 0: I/O ports at e400 [size=256]
        Region 1: I/O ports at e080 [size=128]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA])
        Subsystem: Uniwill Computer Corp Unknown device 2326
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at b000 [size=256]
        Region 2: Memory at ffcf0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at ffcc0000 [disabled] [size=128K]
        Capabilities: [58] AGP version 2.0
                Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
        Subsystem: Uniwill Computer Corp Unknown device 7000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (750ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ffdff800 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at ffdf8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+

02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Uniwill Computer Corp Unknown device 9700
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 9
        Region 0: I/O ports at c800 [size=256]
        Region 1: Memory at ffdff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:0b.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
        Subsystem: Uniwill Computer Corp Unknown device 3008
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ffd00000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 50000000-53fff000 (prefetchable)
        Memory window 1: 5c000000-5ffff000
        I/O window 0: 0000c000-0000c0ff
        I/O window 1: 0000c400-0000c4ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

02:0b.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
        Subsystem: Uniwill Computer Corp Unknown device 3008
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ffd01000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
        Memory window 0: 54000000-57fff000 (prefetchable)
        Memory window 1: 60000000-63fff000
        I/O window 0: 0000cc00-0000ccff
        I/O window 1: 00001000-000010ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

02:0b.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
        Subsystem: Uniwill Computer Corp Unknown device 3008
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ffdfe000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:0c.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
        Subsystem: Intel Corporation Unknown device 2702
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at ffdfd000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-

------------------------

Listik:/home/listicka# dmidecode
# dmidecode 2.8
SMBIOS 2.3 present.
45 structures occupying 1642 bytes.
Table at 0x000F8FF0.

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
        Vendor: American Megatrends Inc.
        Version: 080010
        Release Date: 04/11/2005
        Address: 0xF0000
        Runtime Size: 64 kB
        ROM Size: 512 kB
        Characteristics:
                ISA is supported
                PCI is supported
                PNP is supported
                APM is supported
                BIOS is upgradeable
                BIOS shadowing is allowed
                ESCD support is available
                Boot from CD is supported
                Selectable boot is supported
                BIOS ROM is socketed
                EDD is supported
                5.25"/1.2 MB floppy services are supported (int 13h)
                3.5"/720 KB floppy services are supported (int 13h)
                3.5"/2.88 MB floppy services are supported (int 13h)
                Print screen service is supported (int 5h)
                8042 keyboard services are supported (int 9h)
                Serial services are supported (int 14h)
                Printer services are supported (int 17h)
                CGA/mono video services are supported (int 10h)
                ACPI is supported
                USB legacy is supported
                AGP is supported
                LS-120 boot is supported
                ATAPI Zip drive boot is supported
                BIOS boot specification is supported
                Function key-initiated network boot is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
        Manufacturer: To Be Filled By O.E.M.
        Product Name: 259IA1
        Version: To Be Filled By O.E.M.
        Serial Number: To Be Filled By O.E.M.
        UUID: 00020003-0004-0005-0006-000700080009
        Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
        Manufacturer: To be filled by O.E.M.
        Product Name: To be filled by O.E.M.
        Version: To be filled by O.E.M.
        Serial Number: 12345678

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
        Manufacturer: To Be Filled By O.E.M.
        Type: Desktop
        Lock: Not Present
        Version: To Be Filled By O.E.M.
        Serial Number: To Be Filled By O.E.M.
        Asset Tag: To Be Filled By O.E.M.
        Boot-up State: Safe
        Power Supply State: Safe
        Thermal State: Safe
        Security Status: None
        OEM Information: 0x00000000

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
        Socket Designation: CPU 1
        Type: Central Processor
        Family: Pentium M
        Manufacturer: Intel
        ID: D6 06 00 00 BF FB E9 AF
        Signature: Type 0, Family 6, Model 13, Stepping 6
        Flags:
                FPU (Floating-point unit on-chip)
                VME (Virtual mode extension)
                DE (Debugging extension)
                PSE (Page size extension)
                TSC (Time stamp counter)
                MSR (Model specific registers)
                MCE (Machine check exception)
                CX8 (CMPXCHG8 instruction supported)
                APIC (On-chip APIC hardware supported)
                SEP (Fast system call)
                MTRR (Memory type range registers)
                PGE (Page global enable)
                MCA (Machine check architecture)
                CMOV (Conditional move instruction supported)
                PAT (Page attribute table)
                CLFSH (CLFLUSH instruction supported)
                DS (Debug store)
                ACPI (ACPI supported)
                MMX (MMX technology supported)
                FXSR (Fast floating-point save and restore)
                SSE (Streaming SIMD extensions)
                SSE2 (Streaming SIMD extensions 2)
                SS (Self-snoop)
                TM (Thermal monitor supported)
                PBE (Pending break enabled)
        Version: Intel(R) Pentium(R) M processor 1.70GHz
        Voltage: 3.3 V 2.9 V
        External Clock: 400 MHz
        Max Speed: 1700 MHz
        Current Speed: 1700 MHz
        Status: Populated, Enabled
        Upgrade: Socket 423
        L1 Cache Handle: 0x0005
        L2 Cache Handle: 0x0006
        L3 Cache Handle: 0x0007
        Serial Number: To Be Filled By O.E.M.
        Asset Tag: To Be Filled By O.E.M.
        Part Number: To Be Filled By O.E.M.

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L1-Cache
        Configuration: Enabled, Not Socketed, Level 1
        Operational Mode: Varies With Memory Address
        Location: Internal
        Installed Size: 32 KB
        Maximum Size: 32 KB
        Supported SRAM Types:
                Pipeline Burst
        Installed SRAM Type: Pipeline Burst
        Speed: Unknown
        Error Correction Type: Single-bit ECC
        System Type: Data
        Associativity: 4-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L2-Cache
        Configuration: Enabled, Not Socketed, Level 2
        Operational Mode: Varies With Memory Address
        Location: Internal
        Installed Size: 2048 KB
        Maximum Size: 2048 KB
        Supported SRAM Types:
                Pipeline Burst
        Installed SRAM Type: Pipeline Burst
        Speed: Unknown
        Error Correction Type: Single-bit ECC
        System Type: Unified
        Associativity: 4-way Set-associative

Handle 0x0007, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L3-Cache
        Configuration: Disabled, Not Socketed, Level 3
        Operational Mode: Unknown
        Location: Internal
        Installed Size: 0 KB
        Maximum Size: 0 KB
        Supported SRAM Types:
                Unknown
        Installed SRAM Type: Unknown
        Speed: Unknown
        Error Correction Type: Unknown
        System Type: Unknown
        Associativity: Unknown

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J1A1
        Internal Connector Type: None
        External Reference Designator: PS2Mouse
        External Connector Type: PS/2
        Port Type: Mouse Port

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J1A1
        Internal Connector Type: None
        External Reference Designator: Keyboard
        External Connector Type: PS/2
        Port Type: Keyboard Port

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J2A2
        Internal Connector Type: None
        External Reference Designator: USB1
        External Connector Type: Access Bus (USB)
        Port Type: USB

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J2A2
        Internal Connector Type: None
        External Reference Designator: USB2
        External Connector Type: Access Bus (USB)
        Port Type: USB

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J4A1
        Internal Connector Type: None
        External Reference Designator: LPT 1
        External Connector Type: DB-25 male
        Port Type: Parallel Port ECP/EPP

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J2A1
        Internal Connector Type: None
        External Reference Designator: COM A
        External Connector Type: DB-9 male
        Port Type: Serial Port 16550A Compatible

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J6A1
        Internal Connector Type: None
        External Reference Designator: Audio Mic In
        External Connector Type: Mini Jack (headphones)
        Port Type: Audio Port

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J6A1
        Internal Connector Type: None
        External Reference Designator: Audio Line In
        External Connector Type: Mini Jack (headphones)
        Port Type: Audio Port

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J6B1 - AUX IN
        Internal Connector Type: On Board Sound Input From CD-ROM
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Audio Port

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J6B2 - CDIN
        Internal Connector Type: On Board Sound Input From CD-ROM
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Audio Port

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J6J2 - PRI IDE
        Internal Connector Type: On Board IDE
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J6J1 - SEC IDE
        Internal Connector Type: On Board IDE
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J4J1 - FLOPPY
        Internal Connector Type: On Board Floppy
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J9H1 - FRONT PNL
        Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J1B1 - CHASSIS REAR FAN
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J2F1 - CPU FAN
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J8B4 - FRONT FAN
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J9G2 - FNT USB
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J6C3 - FP AUD
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J9G1 - CONFIG
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J8C1 - SCSI LED
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J9J2 - INTRUDER
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J9G4 - ITP
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J2H1 - MAIN POWER
        Internal Connector Type: Other
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other

Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
        Designation: AGP
        Type: 32-bit AGP 4x
        Current Usage: In Use
        Length: Short
        ID: 0
        Characteristics:
                3.3 V is provided
                Opening is shared
                PME signal is supported

Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
        Designation: PCI1
        Type: 32-bit PCI
        Current Usage: Available
        Length: Short
        ID: 1
        Characteristics:
                3.3 V is provided
                Opening is shared
                PME signal is supported

Handle 0x0022, DMI type 10, 6 bytes
On Board Device Information
        Type: Video
        Status: Enabled
        Description:   To Be Filled By O.E.M.

Handle 0x0023, DMI type 13, 22 bytes
BIOS Language Information
        Installable Languages: 1
                en|US|iso8859-1
        Currently Installed Language: en|US|iso8859-1

Handle 0x0024, DMI type 15, 33 bytes
System Event Log
        Area Length: 1008 bytes
        Header Start Offset: 0x1810
        Header Length: 16 bytes
        Data Start Offset: 0x1820
        Access Method: General-purpose non-volatile data functions
        Access Address: 0x0002
        Status: Invalid, Not Full
        Change Token: 0x00000000
        Header Format: Type 1
        Supported Log Type Descriptors: 5
        Descriptor 1: POST error
        Data Format 1: POST results bitmap
        Descriptor 2: Parity memory error
        Data Format 2: Multiple-event
        Descriptor 3: I/O channel block
        Data Format 3: Multiple-event
        Descriptor 4: Single-bit ECC memory error
        Data Format 4: Multiple-event
        Descriptor 5: Multi-bit ECC memory error
        Data Format 5: Multiple-event

Handle 0x0025, DMI type 16, 15 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity: 3 GB
        Error Information Handle: Not Provided
        Number Of Devices: 2

Handle 0x0026, DMI type 19, 15 bytes
Memory Array Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x100000003FF
        Range Size: 1073741825 kB
        Physical Array Handle: 0x0025
        Partition Width: 0

Handle 0x0027, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0025
        Error Information Handle: Not Provided
        Total Width: 72 bits
        Data Width: 64 bits
        Size: 512 MB
        Form Factor: DIMM
        Set: None
        Locator: DIMM0
        Bank Locator: BANK0
        Type: SDRAM
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer: Manufacturer0
        Serial Number: SerNum0
        Asset Tag: AssetTagNum0
        Part Number: PartNum0

Handle 0x0028, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x000200003FF
        Range Size: 524289 kB
        Physical Device Handle: 0x0027
        Memory Array Mapped Address Handle: 0x0026
        Partition Row Position: 1

Handle 0x0029, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0025
        Error Information Handle: Not Provided
        Total Width: 72 bits
        Data Width: 64 bits
        Size: 512 MB
        Form Factor: DIMM
        Set: None
        Locator: DIMM1
        Bank Locator: BANK1
        Type: SDRAM
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer: Manufacturer1
        Serial Number: SerNum1
        Asset Tag: AssetTagNum1
        Part Number: PartNum1

Handle 0x002A, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x00020000000
        Ending Address: 0x000400003FF
        Range Size: 524289 kB
        Physical Device Handle: 0x0029
        Memory Array Mapped Address Handle: 0x0026
        Partition Row Position: 1

Handle 0x002B, DMI type 32, 20 bytes
System Boot Information
        Status: No errors detected

Handle 0x002C, DMI type 127, 4 bytes
End Of Table
-------------------

Listik:/home/listicka# cat /proc/interrupts
           CPU0
  0:   15654512    XT-PIC-XT        timer
  1:      31884    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  8:          1    XT-PIC-XT        rtc
  9:    1404744    XT-PIC-XT        acpi, ipw2200, eth0, Intel 82801DB-ICH4, Intel 82801DB-ICH4 Modem
 11:   68428905    XT-PIC-XT        yenta, yenta, ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ohci1394, radeon@pci:0000:01:00.0
 12:    1994729    XT-PIC-XT        i8042
 14:      36683    XT-PIC-XT        ide0
 15:     250516    XT-PIC-XT        ide1
NMI:      15009
LOC:   20164812
ERR:      28471
^^^^^^^^^^ This is also related to this bug
MIS:          0

Comment 8 Cijoml Cijomlovic Cijomlov 2007-06-24 01:04:45 UTC
Created attachment 11861 [details]
/proc/config.gz

/proc/config.gz - please check if I have all related options enabled related to my laptop
Comment 9 Cijoml Cijomlovic Cijomlov 2007-06-24 01:16:07 UTC
Linux version 2.6.21.5 (root@Listik) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 PREEMPT Sat Jun 16 16:02:04 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003fed0000 end: 000000003ffd0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003ffd0000 size: 000000000000f000 end: 000000003ffdf000 type: 3
copy_e820_map() start: 000000003ffdf000 size: 0000000000021000 end: 0000000040000000 type: 4
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
 BIOS-e820: 000000003ffd0000 - 000000003ffdf000 (ACPI data)
 BIOS-e820: 000000003ffdf000 - 0000000040000000 (ACPI NVS)
127MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 262096) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   262096
early_node_map[1] active PFN ranges
    0:        0 ->   262096
On node 0 totalpages: 262096
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 255 pages used for memmap
  HighMem zone: 32465 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP 000F64A0, 0024 (r2 ACPIAM)
ACPI: XSDT 3FFD0100, 003C (r1 A M I  OEMXSDT   4000511 MSFT       97)
ACPI: FACP 3FFD0290, 00F4 (r3 A M I  OEMFACP   4000511 MSFT       97)
ACPI: DSDT 3FFD03F0, 3AC2 (r1  UW___ F08_____        0 INTL  2002026)
ACPI: FACS 3FFDF000, 0040
ACPI: OEMB 3FFDF040, 01BC (r1 A M I  AMI_OEM   4000511 MSFT       97)
ACPI: SSDT 3FFD3EC0, 037B (r1    AMI   CPU1PM        1 INTL  2002026)
ACPI: PM-Timer IO Port: 0x408
Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
Built 1 zonelists.  Total pages: 260049
Kernel command line: BOOT_IMAGE=Linux ro root=302 pci=assign-busses
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1700.102 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035412k/1048384k available (2026k kernel code, 12348k reserved, 759k data, 196k init, 130880k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffaa000 - 0xfffff000   ( 340 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03bc000 - 0xc03ed000   ( 196 kB)
      .data : 0xc02fab79 - 0xc03b8af4   ( 759 kB)
      .text : 0xc0100000 - 0xc02fab79   (2026 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3401.17 BogoMIPS (lpj=1700589)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbbf 00000000 00000000 00002040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0a00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 6 9 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 6 *9 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 6 9 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:07: ioport range 0x600-0x60f has been reserved
pnp: 00:07: ioport range 0x640-0x64f has been reserved
pnp: 00:08: iomem range 0xfff00000-0xffffffff has been reserved
pnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
pnp: 00:09: ioport range 0x1100-0x113f has been reserved
pnp: 00:09: ioport range 0x1254-0x1254 has been reserved
pnp: 00:09: ioport range 0x12d4-0x12d4 has been reserved
pnp: 00:09: ioport range 0x1300-0x1375 has been reserved
pnp: 00:09: ioport range 0x1377-0x137f has been reserved
pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0a: iomem range 0x0-0x0 could not be reserved
pnp: 00:0a: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0a: iomem range 0x100000-0x3fffffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: 9000-bfff
  MEM window: ffc00000-ffcfffff
  PREFETCH window: ceb00000-deafffff
PCI: Bus 3, cardbus bridge: 0000:02:0b.0
  IO window: 0000c000-0000c0ff
  IO window: 0000c400-0000c4ff
  PREFETCH window: 50000000-53ffffff
  MEM window: 5c000000-5fffffff
PCI: Bus 7, cardbus bridge: 0000:02:0b.1
  IO window: 0000cc00-0000ccff
  IO window: 00001000-000010ff
  PREFETCH window: 54000000-57ffffff
  MEM window: 60000000-63ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: ffd00000-ffdfffff
  PREFETCH window: 50000000-57ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Enabling device 0000:02:0b.1 (0000 -> 0003)
ACPI: PCI Interrupt 0000:02:0b.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:0b.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
audit: initializing netlink socket (disabled)
audit(1182676120.261:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=400.00 Mhz, System=216.00 MHz
radeonfb: PLL min 20000 max 40000
Non-DDC laptop panel detected
Switched to high resolution mode on CPU 0
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1680X1050 WSXGA+
radeonfb: detected LVDS panel size from BIOS: 1680x1050
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 210x65
radeonfb (0000:01:00.0): ATI Radeon NP
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (75 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.25.0 20060524 on minor 0
Time: acpi_pm clocksource has been installed.
Clocksource tsc unstable (delta = -206883822 ns)
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST9808211A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
Yenta: CardBus bridge found at 0000:02:0b.0 [1584:3008]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
cs: IO port probe 0xc000-0xcfff: clean.
pcmcia: parent PCI bridge Memory window: 0xffd00000 - 0xffdfffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
Yenta: CardBus bridge found at 0000:02:0b.1 [1584:3008]
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
cs: IO port probe 0xc000-0xcfff: clean.
pcmcia: parent PCI bridge Memory window: 0xffd00000 - 0xffdfffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
usbmon: debugfs is not available
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
GACT probability on
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Testing NMI watchdog ... OK.
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
input: SynPS/2 Synaptics TouchPad as /class/input/input5
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input6
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xffeffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000ec00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
usb 2-2: new full speed USB device using uhci_hcd and address 2
intel_rng: FWH not detected
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
usb 2-2: configuration #1 chosen from 1 choice
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
eth0: RealTek RTL8139 at 0xf8864400, 00:03:0d:2b:c8:e3, IRQ 9
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[ffdff800-ffdfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d002558ad3d]
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
intel8x0_measure_ac97_clock: measured 50527 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.6 to 64
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Adding 1510100k swap on /dev/hda3.  Priority:-1 extents:1 across:1510100k
EXT3 FS on hda2, internal journal
SCSI subsystem initialized
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
eth0: link down
ieee80211_crypt: registered algorithm 'TKIP'
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:03:00.0 to 64
DVB: registering new adapter (pluto2)
pluto2 0000:03:00.0: board revision 2.15
pluto2 0000:03:00.0: S/N 13320420103842
pluto2 0000:03:00.0: MAC 00:d0:16:01:5c:0c
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: found firmware revision 29 -- ok
Comment 10 Cijoml Cijomlovic Cijomlov 2007-06-24 01:16:32 UTC
03:00.0 Multimedia video controller: SCM Microsystems, Inc. Pluto2 DVB-T Receiver for PCMCIA [EasyWatch MobilSet]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 5c000200 (32-bit, non-prefetchable) [size=128]
        Region 1: Memory at 5c000000 (32-bit, non-prefetchable) [size=512]
        Capabilities: [78] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=9 DScale=1 PME+
Comment 11 Cijoml Cijomlovic Cijomlov 2007-06-24 01:18:00 UTC
During firmware load I getts NO error:

Listik:/home/listicka# cat /proc/interrupts
           CPU0
  0:      62260    XT-PIC-XT        timer
  1:        361    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  8:          1    XT-PIC-XT        rtc
  9:       3188    XT-PIC-XT        acpi, ipw2200, Intel 82801DB-ICH4, Intel 82801DB-ICH4 Modem, eth0
 11:      41327    XT-PIC-XT        yenta, yenta, ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ohci1394, pluto2, radeon@pci:0000:01:00.0
 12:      56978    XT-PIC-XT        i8042
 14:       8886    XT-PIC-XT        ide0
 15:       2392    XT-PIC-XT        ide1
NMI:       1074
LOC:      71200
ERR:          0
MIS:          0
Comment 12 Cijoml Cijomlovic Cijomlov 2007-12-28 02:37:06 UTC
I still see this event occasionally but not so often as before

Note You need to log in before you can comment on or make changes to this bug.