Most recent kernel where this bug did not occur: Distribution:suse 10 Hardware Environment: 3 hd scsi card: 39160 (seem aic7xxx driver) hp 18.2 map3367nc (id:00 lun:00) last drive on the cable fujitsu map3367nc (id:01:lun:00) ibm-esxs map3367np (id:02 lun00) first drive on the cable processor: amd 1800+ Software Environment: suse 10, kde 3.4.2 Problem Description: i can run the system a lot of time and suddenly the system freeze often when i boot the system i see: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target1:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target1:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) (scsi1:A:0:0): Unexpected busfree in Data-in phase SEQADDR == 0x84 SCSI error : <1 0 0 0> return code = 0x10000 end_request: I/O error, dev sda, sector 8451 SCSI error : <1 0 0 0> return code = 0x10000 end_request: I/O error, dev sda, sector 8459 SCSI error : <1 0 0 0> return code = 0x10000 end_request: I/O error, dev sda, sector 8467 SCSI error : <1 0 0 0> return code = 0x10000 end_request: I/O error, dev sda, sector 8475 target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) scsi error only happen on dev sda ... (near of the terminaison) Steps to reproduce:
Begin forwarded message: Date: Thu, 24 Nov 2005 22:22:37 -0800 From: bugme-daemon@bugzilla.kernel.org To: bugme-new@lists.osdl.org Subject: [Bugme-new] [Bug 5656] New: system freeze http://bugzilla.kernel.org/show_bug.cgi?id=5656 Summary: system freeze Kernel Version: linux 2.6.13-15-default Status: NEW Severity: blocking Owner: andmike@us.ibm.com Submitter: collinm@laboiteaprog.com Most recent kernel where this bug did not occur: Distribution:suse 10 Hardware Environment: 3 hd scsi card: 39160 (seem aic7xxx driver) hp 18.2 map3367nc (id:00 lun:00) last drive on the cable fujitsu map3367nc (id:01:lun:00) ibm-esxs map3367np (id:02 lun00) first drive on the cable processor: amd 1800+ Software Environment: suse 10, kde 3.4.2 Problem Description: i can run the system a lot of time and suddenly the system freeze often when i boot the system i see: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target1:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target1:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) (scsi1:A:0:0): Unexpected busfree in Data-in phase SEQADDR == 0x84 SCSI error : <1 0 0 0> return code = 0x10000 end_request: I/O error, dev sda, sector 8451 SCSI error : <1 0 0 0> return code = 0x10000 end_request: I/O error, dev sda, sector 8459 SCSI error : <1 0 0 0> return code = 0x10000 end_request: I/O error, dev sda, sector 8467 SCSI error : <1 0 0 0> return code = 0x10000 end_request: I/O error, dev sda, sector 8475 target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) scsi error only happen on dev sda ... (near of the terminaison) Steps to reproduce: ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
Is this still a problem with 2.6.22+? Thanks.
I can't say, because I don't use anymore a scsi hd and scsi card