Created attachment 93281 [details] A document of the information provided Using the POD Studio UX2 and Ubuntu 13.04 with the later releases of the 3.8.0 linux kernel the audio sounds very robotic and is slightly slower than usual. If I remember correctly I was able to get the sound back to normal on a slightly earlier release of the 3.8.0 linux kernel, but i have reinstalled Ubuntu 13.04 since. The problem occurs with everything that is played, so it is not an issue with particular applications. My speakers are connected in stereo through the 2 analogue outs at the back of the device. I have never had this issue on previous releases of Ubuntu. Playing music with this issue makes the music difficult and overall pointless to listen to. I have even disabled my onboard sound to see if that may be the problem, but the issue still occurs. I believe it is a sound driver issue relating to the later kernel releases. I hope the issue can be resolved. Thank you. Launchpad Bug Report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1103018 Version: Linux version 3.8.0-999-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201302090436 SMP Sat Feb 9 09:37:17 UTC 2013 Description: Ubuntu Raring Ringtail (development branch) Release: 13.04 ver_linux sript output: Linux aaron-desktop 3.8.0-999-generic #201302090436 SMP Sat Feb 9 09:37:17 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Gnu C 4.7 Gnu make 3.81 binutils 2.23.1 util-linux 2.20.1 mount support module-init-tools 9 e2fsprogs 1.42.5 pcmciautils 018 PPP 2.4.5 Linux C Library 2.17 Dynamic linker (ldd) 2.17 Procps 3.3.3 Net-tools 1.60 Kbd 1.15.3 Sh-utils 8.20 wireless-tools 30 Modules Loaded nls_utf8 udf crc_itu_t rfcomm bnep bluetooth parport_pc ppdev snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep line6usb snd_seq_midi coretemp snd_seq_midi_event mxm_wmi snd_rawmidi snd_pcm snd_seq hid_axff ff_memless snd_page_alloc nvidia microcode snd_seq_device joydev snd_timer psmouse serio_raw snd lpc_ich asus_atk0110 mac_hid soundcore wmi lp parport hid_generic hid_microsoft usbhid hid pata_marvell floppy atl1e ahci libahci Processor Information: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping : 10 microcode : 0xa07 cpu MHz : 3831.350 cache size : 3072 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 7662.70 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping : 10 microcode : 0xa07 cpu MHz : 3831.350 cache size : 3072 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 7662.70 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: Module Information: nls_utf8 12557 1 - Live 0x0000000000000000 udf 94509 1 - Live 0x0000000000000000 crc_itu_t 12707 1 udf, Live 0x0000000000000000 rfcomm 47864 0 - Live 0x0000000000000000 bnep 18258 2 - Live 0x0000000000000000 bluetooth 246976 10 rfcomm,bnep, Live 0x0000000000000000 parport_pc 32866 0 - Live 0x0000000000000000 ppdev 17113 0 - Live 0x0000000000000000 snd_hda_codec_realtek 79916 1 - Live 0x0000000000000000 snd_hda_intel 44339 3 - Live 0x0000000000000000 snd_hda_codec 141461 2 snd_hda_codec_realtek,snd_hda_intel, Live 0x0000000000000000 snd_hwdep 13668 1 snd_hda_codec, Live 0x0000000000000000 line6usb 44983 2 - Live 0x0000000000000000 (C) snd_seq_midi 13324 0 - Live 0x0000000000000000 coretemp 13596 0 - Live 0x0000000000000000 snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000 mxm_wmi 13021 0 - Live 0x0000000000000000 snd_rawmidi 30417 2 line6usb,snd_seq_midi, Live 0x0000000000000000 snd_pcm 102477 3 snd_hda_intel,snd_hda_codec,line6usb, Live 0x0000000000000000 snd_seq 61930 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000 hid_axff 12673 0 - Live 0x0000000000000000 ff_memless 13097 1 hid_axff, Live 0x0000000000000000 snd_page_alloc 18798 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000 nvidia 9350503 48 - Live 0x0000000000000000 (POF) microcode 23017 0 - Live 0x0000000000000000 snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x0000000000000000 joydev 17613 0 - Live 0x0000000000000000 snd_timer 29989 2 snd_pcm,snd_seq, Live 0x0000000000000000 psmouse 92375 0 - Live 0x0000000000000000 serio_raw 13215 0 - Live 0x0000000000000000 snd 69533 20 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,line6usb,snd_rawmidi,snd_pcm,snd_seq,snd_seq_device,snd_timer, Live 0x0000000000000000 lpc_ich 17144 0 - Live 0x0000000000000000 asus_atk0110 18078 0 - Live 0x0000000000000000 mac_hid 13253 0 - Live 0x0000000000000000 soundcore 12680 1 snd, Live 0x0000000000000000 wmi 19256 1 mxm_wmi, Live 0x0000000000000000 lp 17799 0 - Live 0x0000000000000000 parport 46562 3 parport_pc,ppdev,lp, Live 0x0000000000000000 hid_generic 12540 0 - Live 0x0000000000000000 hid_microsoft 12888 0 - Live 0x0000000000000000 usbhid 47346 1 hid_axff, Live 0x0000000000000000 hid 101262 4 hid_axff,hid_generic,hid_microsoft,usbhid, Live 0x0000000000000000 pata_marvell 12894 0 - Live 0x0000000000000000 floppy 70206 0 - Live 0x0000000000000000 atl1e 37848 0 - Live 0x0000000000000000 ahci 25879 4 - Live 0x0000000000000000 libahci 31606 1 ahci, Live 0x0000000000000000 Loaded Driver and Hardware Information: 0000-0cf7 : PCI Bus 0000:00 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0071 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0290-029f : pnp 00:06 03c0-03df : vga+ 03f2-03f2 : floppy 03f4-03f5 : floppy 03f7-03f7 : floppy 03f8-03ff : serial 0400-041f : 0000:00:1f.3 04d0-04d1 : pnp 00:07 0500-057f : pnp 00:07 0800-087f : pnp 00:07 0800-0803 : ACPI PM1a_EVT_BLK 0804-0805 : ACPI PM1a_CNT_BLK 0808-080b : ACPI PM_TMR 0810-0815 : ACPI CPU throttle 0820-082f : ACPI GPE0_BLK 0830-0833 : iTCO_wdt 0850-0850 : ACPI PM2_CNT_BLK 0860-087f : iTCO_wdt 0cf8-0cff : PCI conf1 0d00-ffff : PCI Bus 0000:00 1000-1fff : PCI Bus 0000:04 a400-a41f : 0000:00:1f.2 a400-a41f : ahci a480-a483 : 0000:00:1f.2 a480-a483 : ahci a800-a807 : 0000:00:1f.2 a800-a807 : ahci a880-a883 : 0000:00:1f.2 a880-a883 : ahci ac00-ac07 : 0000:00:1f.2 ac00-ac07 : ahci b080-b09f : 0000:00:1d.0 b080-b09f : uhci_hcd b400-b41f : 0000:00:1d.1 b400-b41f : uhci_hcd b480-b49f : 0000:00:1d.2 b480-b49f : uhci_hcd b800-b81f : 0000:00:1a.0 b800-b81f : uhci_hcd b880-b89f : 0000:00:1a.1 b880-b89f : uhci_hcd bc00-bc1f : 0000:00:1a.2 bc00-bc1f : uhci_hcd c000-cfff : PCI Bus 0000:01 cc00-cc7f : 0000:01:00.0 d000-dfff : PCI Bus 0000:02 dc00-dc7f : 0000:02:00.0 dc00-dc7f : ATL1E e000-efff : PCI Bus 0000:03 e400-e40f : 0000:03:00.0 e400-e40f : pata_marvell e480-e483 : 0000:03:00.0 e480-e483 : pata_marvell e800-e807 : 0000:03:00.0 e800-e807 : pata_marvell e880-e883 : 0000:03:00.0 e880-e883 : pata_marvell ec00-ec07 : 0000:03:00.0 ec00-ec07 : pata_marvell 00000000-0000ffff : reserved 00010000-0009cbff : System RAM 0009cc00-0009ffff : reserved 000a0000-000bffff : PCI Bus 0000:00 000c0000-000cd1ff : Video ROM 000d0000-000dffff : PCI Bus 0000:00 000e4000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-bff6ffff : System RAM 01000000-016f5170 : Kernel code 016f5171-01ced9ff : Kernel data 01df2000-01f48fff : Kernel bss bff70000-bff7dfff : ACPI Tables bff7e000-bffcffff : ACPI Non-volatile Storage bffd0000-bfffffff : reserved c0000000-dfffffff : PCI Bus 0000:00 c0000000-dfffffff : PCI Bus 0000:01 c0000000-dfffffff : 0000:01:00.0 e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff] e0000000-efffffff : pnp 00:0d f0000000-ffffffff : PCI Bus 0000:00 f0000000-f03fffff : PCI Bus 0000:04 f0400000-f05fffff : PCI Bus 0000:03 f0600000-f07fffff : PCI Bus 0000:02 f8f00000-f8ffffff : PCI Bus 0000:04 f9ff8000-f9ffbfff : 0000:00:1b.0 f9ff8000-f9ffbfff : ICH HD audio f9ffe800-f9ffefff : 0000:00:1f.2 f9ffe800-f9ffefff : ahci f9fff400-f9fff4ff : 0000:00:1f.3 f9fff800-f9fffbff : 0000:00:1d.7 f9fff800-f9fffbff : ehci_hcd f9fffc00-f9ffffff : 0000:00:1a.7 f9fffc00-f9ffffff : ehci_hcd fa000000-fe9fffff : PCI Bus 0000:01 fa000000-fbffffff : 0000:01:00.0 fd000000-fdffffff : 0000:01:00.0 fd000000-fdffffff : nvidia fe9e0000-fe9fffff : 0000:01:00.0 fea00000-feafffff : PCI Bus 0000:02 feac0000-feafffff : 0000:02:00.0 feac0000-feafffff : ATL1E feb00000-febfffff : PCI Bus 0000:03 febffc00-febfffff : 0000:03:00.0 fec00000-fec003ff : IOAPIC 0 fed00000-fed003ff : HPET 0 fed08000-fed08fff : pnp 00:07 fed14000-fed19fff : pnp 00:00 fed1c000-fed1ffff : pnp 00:07 fed1f410-fed1f414 : iTCO_wdt fed20000-fed3ffff : pnp 00:07 fed50000-fed8ffff : pnp 00:07 fee00000-fee00fff : Local APIC fee00000-fee00fff : reserved fee00000-fee00fff : pnp 00:0c ffc00000-ffefffff : pnp 00:0a fff00000-ffffffff : reserved 100000000-13fffffff : System RAM PCI Information: 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fa000000-fe9fffff Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41a1 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 75.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at b800 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at b880 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bc00 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] Vendor Specific Information: Len=06 <?> Kernel driver in use: ehci-pci 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller Subsystem: ASUSTeK Computer Inc. Device 82fe Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4142 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f0000000-f03fffff Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41b1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41c1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82d4 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=05 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41d1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=06 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at b080 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b400 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b480 [size=32] Capabilities: [50] Vendor Specific Information: Len=06 <?> Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] Vendor Specific Information: Len=06 <?> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 44 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=32] Region 5: Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Address: fee0300c Data: 41e1 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] Vendor Specific Information: Len=06 <?> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 15 Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 01:00.0 VGA compatible controller: NVIDIA Corporation G92 [GeForce 9800 GT] (rev a2) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device 2372 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M] Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at cc00 [size=128] [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [128 v1] Power Budgeting <?> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nvidia 02:00.0 Ethernet controller: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8226 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at feac0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at dc00 [size=128] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4152 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [180 v1] Device Serial Number ff-34-56-78-00-e0-12-ff Kernel driver in use: ATL1E 03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 82e0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn- Kernel driver in use: pata_marvell SCSI Information: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TSSTcorp Model: CDDVDW SH-S223C Rev: SB01 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: OCZ-SOLID3 Rev: 2.22 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD1600AABB-5 Rev: 00.0 Type: Direct-Access ANSI SCSI revision: 05 Other Information: 1 1789 2092 2291 2605 3005 774 diskstats net 10 18 21 23 2606 3008 8 dma pagetypeinfo 1004 1834 2125 230 2607 3018 814 driver partitions 1006 1835 2132 2309 2608 31 847 execdomains sched_debug 1011 1838 2160 2311 2609 3142 865 fb schedstat 1034 1839 2162 2313 2610 3147 889 filesystems scsi 1039 1840 2169 2315 268 3198 898 fs self 1040 1850 217 2317 269 32 9 interrupts slabinfo 1041 1854 2174 2319 27 3203 917 iomem softirqs 1050 1857 218 2320 270 33 918 ioports stat 1085 1867 219 2321 2707 34 935 irq swaps 11 1869 22 2370 271 35 936 kallsyms sys 1134 1878 220 24 2716 359 944 kcore sysrq-trigger 12 19 221 25 2718 36 958 key-users sysvipc 13 1913 222 2506 2746 366 975 kmsg timer_list 14 1939 2237 2513 2769 4 985 kpagecount timer_stats 15 2 2242 2519 28 47 acpi kpageflags tty 1515 20 2245 2520 2803 49 asound latency_stats uptime 1519 2040 2248 2521 2809 5 buddyinfo loadavg version 16 2045 2255 2527 2832 581 bus locks vmallocinfo 1664 2077 2259 2535 2835 582 cgroups mdstat vmstat 1677 2078 226 2543 2844 619 cmdline meminfo zoneinfo 1680 2079 2260 2548 2845 68 consoles misc 1684 2083 227 2572 2908 69 cpuinfo modules 1687 2087 2289 26 3 7 crypto mounts 17 2090 229 2600 30 707 devices mtrr
It's a staging driver I really don't take care of. If it worked with a certain version, could you bisect it?
(In reply to comment #1) > It's a staging driver I really don't take care of. > If it worked with a certain version, could you bisect it? Well I believed it only worked with kernel releases before 3.8.0. For example it worked within Ubuntu 12.10 (fully updated). I have tested previous 3.8.0 kernel releases to see if the issue still persists and it does, so I believe the issue may have occurred in the early stages of the 3.8.0 kernel.
I ran into this issue after a system upgrade. Jack works well using the onboard soundcard, but I get a really crappy sound (as illustrated on the youtube video) with a POD Studio UX1. As said by azakid@ymail.com, the problem appeared "around" the 3.8 release, I'll try to bisect it more precisely during the week. Distribution: Arch Linux Version: Linux zubrowska 3.8.4-1-ARCH #1 SMP PREEMPT Wed Mar 20 22:10:25 CET 2013 x86_64 GNU/Linux
The problem appeared with the first 3.8 release, everything works fine using a 3.7.10 kernel. I tried to use the driver sources from the 3.7.10 tag to build a 3.8 kernel, with no luck (apparently changes were mainly code cleanup: http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/log/?qt=grep&q=line6), the sound is still distorted. So it seems the problem lies in another part, alsa, usb, ... Currently the alsa bug tracker is offline, but I'll open a bug there to see if the distortion shape trigger something from the dev, they may recognize a "class" of problem. Any idea how I can be useful to help in solving this problem ?
Could you try to bisect between 3.7 and 3.8? I don't think the problem is in ALSA part, since line6 is a completely different driver from the generic usb-audio. But the full bisection would be still safer.
Ok, so the next step is to use directly git bisect with the two tags as starting and ending point ? I'm afraid it will result in a shitload of kernel compilation :D Just in case I encounter some compilation or other unrelated problems with a given patch, what do I need to do to restart the bisection with the next commit, git bisect skip, and then bisect start again, or do I flag it as a bad commit ? And regarding the compilation process, make mrpoper && make at each step or is there any other faster way (maybe avoiding cleaning the tree) ?
I am wondering if anyone has progressed or found anything new relating to my bug report. I have found out based on my YouTube video that users are having issues with the Line6 Toneport GX as well as the UX2 and UX1 devices. Ubuntu 13.04 has officially released with the 3.8 kernel. Last time I checked (just over a week ago) the issue still existed. I hope for this problem to be fixed soon in the next major kernel release, as it affects users other than myself on many other Line6 sound devices. Thank you all for co-operating in diagnosing and ultimately aiming to fix the problem.
Hi, I am one of the other users affected. The sound on my Line 6 UX2 is the same as on the video http://youtu.be/mzmESXZ_R3g since my (full) upgrade to kubuntu 13.4 (3.8.0-19-generic #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux) last week. No problem before, and no problem on the built-in Sound card. If there is any information I can provide to shrink the search space, I'ld be happy to provide it.
I also experienced the same issue when I tested the Ubuntu Studio with a 3.8 kernel. Never had this issue before, with prior versions of the kernel. This can become problematic as all major distribution will migrate to 3.8.x kernel series.
Thank you both for replying. I hope a kernel developer with experience in this field will be able to help. It will also be great if anyone can state that this bug affects them on my Launchpad bug report, as it will help highlight that this is an important issue that needs to be resolved. I am very certain that this issue occurred in the early development stages of the 3.8.0 kernel. I also can confirm that this issue is more widespread as it affects many users, even with different Line6 sound devices. Thank you all for your help and I just hope that someone would be able to track down and resolve this issue. I am not sure what other information anyone can provide, so it would be helpful if someone such as a developer could guide people to prove detailed information such as mine maybe.
I tried to provide additional info by (after installing launchpadlib) running $ apport-collect 1103018 but I am getting: ERROR: hook /usr/share/apport/general-hooks/cloud_archive.py crashed: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport/report.py", line 197, in _run_hook symb['add_info'](report, ui) File "/usr/share/apport/general-hooks/cloud_archive.py", line 18, in add_info if '~cloud' in packaging.get_version(package) and \ File "/usr/lib/python2.7/dist-packages/apport/packaging_impl.py", line 123, in get_version raise ValueError('package %s does not exist' % package) ValueError: package linux does not exist
Hmm. I'm not sure how to help with that error. Nothing new has happened. I'm just hoping a kernel developer will take a look at this information in the hope that this issue can be addressed. Thank you for the information and help.
Is this still a problem with the recent version (4.0.x or later)? LINE6 driver has been merged to the official sound driver tree recently, so there is a good chance that the issues have been fixed.
Everything is working fine for me using Linux 4.0.5 on Arch Linux (and has been for a while, I forgot about this report)
Good to hear :)
Hi there. This topic hasn't been updated for an year and a half now but I am experiencing the exact same issues described here with Ubuntu 16.04.1 LTS and kernel version 4.0-47. I might try to migrate to Arch Linux, since it seems that you guys made it work on Arch, but I would prefer to stay with xubuntu or debian. Is there someone who managed to fix it on a debian based distro? Thanks!