Bug 44361 - rt61pci kernel panic during shut down
rt61pci kernel panic during shut down
Status: CLOSED CODE_FIX
Product: Networking
Classification: Unclassified
Component: Wireless
All Linux
: P1 normal
Assigned To: Stanislaw Gruszka
:
Depends on:
Blocks:
  Show dependency treegraph
 
Reported: 2012-07-09 14:57 UTC by dolohow
Modified: 2012-08-20 23:33 UTC (History)
3 users (show)

See Also:
Kernel Version: 3.3.8
Tree: Mainline
Regression: No


Attachments
objdump (250.64 KB, text/plain)
2012-07-12 09:24 UTC, dolohow
Details
limit_calltrace_to_10_entries.patch (2.57 KB, text/plain)
2012-07-27 13:03 UTC, Stanislaw Gruszka
Details
limit_calltrace_to_10_entries_for_3.3.patch (2.58 KB, text/plain)
2012-07-27 13:05 UTC, Stanislaw Gruszka
Details
rt61pci_use_hw_conf.patch (589 bytes, text/plain)
2012-08-02 13:58 UTC, Stanislaw Gruszka
Details

Description dolohow 2012-07-09 14:57:40 UTC
I have a kernel panic when shutting down the system after added module for Ralink RT61 and installed firmware (version 1.2) on gentoo linux

I can't provide the full kernel panic information:
rt61 - config +0x1dl/0x2b0 
kernel panic - not syncing: 
Fatal exception in interrupt 
Disabling non-boot CPUs

Linux version 3.3.8-gentoo (root@HALF-BLOOD) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #6 SMP Sun Jul 8 18:05:51 CEST 2012

rt61pci 21294 0 - Live 0xffffffffa0296000
rt2x00pci 4708 1 rt61pci, Live 0xffffffffa0009000
rt2x00lib 33006 2 rt61pci,rt2x00pci, Live 0xffffffffa0285000
k10temp 2731 0 - Live 0xffffffffa02e1000
fglrx 2586372 107 - Live 0xffffffffa000c000 (PO)
rtl8180 29849 0 - Live 0xffffffffa0000000

00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
        Subsystem: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32

00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6530D] (prog-if 00 [VGA controller])
        Subsystem: Giga-byte Technology Device d000
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 42
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 1: I/O ports at f800 [size=256]
        Region 2: Memory at fdfc0000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                        ExtTag+ RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0700c  Data: 4171
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Kernel driver in use: fglrx_pci
        Kernel modules: fglrx

00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fdd00000-fddfffff
        Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag+ RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
                DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] Device 1234
        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Kernel driver in use: pcieport

00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology Device b002
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 40
        Region 0: I/O ports at ff00 [size=8]
        Region 1: I/O ports at fe00 [size=4]
        Region 2: I/O ports at fd00 [size=8]
        Region 3: I/O ports at fc00 [size=4]
        Region 4: I/O ports at fb00 [size=16]
        Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+
                Address: 00000000fee0700c  Data: 4159
        Capabilities: [70] SATA HBA v1.0 InCfgSpace
        Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5004
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci_hcd

00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5004
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci_hcd

00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13)
        Subsystem: Giga-byte Technology Device 4385
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller (prog-if 8a [Master SecP PriP])
        Subsystem: Giga-byte Technology Device 5002
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 255
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at fa00 [size=16]

00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
        Subsystem: Giga-byte Technology Device a002
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
        Subsystem: Advanced Micro Devices [AMD] nee ATI Device 439d
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fdb00000-fdbfffff
        Prefetchable memory behind bridge: fde00000-fdefffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5004
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci_hcd

00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k10temp
        Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 41
        Region 0: I/O ports at ee00 [size=256]
        Region 2: Memory at fdcff000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at fdcf8000 (64-bit, prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0700c  Data: 4161
        Capabilities: [70] Express (v2) Endpoint, MSI 01
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data
                Unknown small resource type 00, will not decode more.
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
        Kernel driver in use: r8169

02:06.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g
        Subsystem: Ralink corp. Device 2561
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at fdbf8000 (32-bit, non-prefetchable) [size=32K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: rt61pci
        Kernel modules: rt61pci


Related:
http://forums.gentoo.org/viewtopic-p-7084528.html
Comment 1 John W. Linville 2012-07-09 15:40:19 UTC
You can't provide the full kernel panic information?  Can you provide the backtrace?

Have you tried this on a 3.4 or later kernel?
Comment 2 Stanislaw Gruszka 2012-07-10 07:29:01 UTC
Panic information could be gathered using a photo camera and then you'll need to attach photo here. 

Not sure if this could be fixed on kernel newer than 3.3, but it worth to try that.
Comment 3 dolohow 2012-07-10 12:17:33 UTC
How to provide the backtrace?

No, I'm not tried on 3.4 kernel.

Here is the photo from camera of kernel panic:
http://i.imgur.com/Gbr3e.jpg
Comment 4 Stanislaw Gruszka 2012-07-11 11:35:16 UTC
Please run this command on your kernel sources:

objdump -d -r --prefix-addresses drivers/net/wireless/rt2x00/rt61pci.ko > rt61pci.txt

and attach rt61pci.txt file using "Add an attachment" option.

Also would be good if you could compile kernel with CONFIG_DEBUG_INFO (if not already compiled with that option) and provide output of:

gdb  drivers/net/wireless/rt2x00/rt61pci.ko
(gdb) l *(rt61pci_config + 0x1d)
Comment 5 dolohow 2012-07-12 09:24:30 UTC
Created attachment 75241 [details]
objdump
Comment 6 dolohow 2012-07-12 09:27:04 UTC
I don't know how to use gdb, what I need to type in this:

GNU gdb (Gentoo 7.3.1 p2) 7.3.1
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
For bug reporting instructions, please see:
<http://bugs.gentoo.org/>...
Reading symbols from /lib64/modules/3.3.8-gentoo/kernel/drivers/net/wireless/rt2x00/rt61pci.ko...(no debugging symbols found)...done.


Debug mode is enabled in kernel module...
Comment 7 Stanislaw Gruszka 2012-07-13 12:15:19 UTC
You (In reply to comment #6)
> /lib64/modules/3.3.8-gentoo/kernel/drivers/net/wireless/rt2x00/rt61pci.ko...(no
> Debug mode is enabled in kernel module...
You have to do this on kernel source not installation (symbols are stripped otherwise installation will have hundreds of MBs) for example:
gdb /usr/src/linux/drivers/net/wireless/rt2x00/rt61pci.ko
Comment 8 Stanislaw Gruszka 2012-07-13 12:32:41 UTC
I think this bug happen because at 

static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
                                    struct rt2x00lib_conf *libconf)
{
        u16 eeprom;
        short lna_gain = 0;

        if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
                if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags))
                        lna_gain += 14;


libconf->conf->channel or libconf->conf is NULL. Reason of that is unknown. Unfortunately photo from comment 3 does not show top of calltrace, so is hard to tell why those values are NULL.

If you do 

iwconfig wlan0 power off 

does that workaround the problem ?
Comment 9 dolohow 2012-07-13 12:43:37 UTC
1. When I restarting the computer the problem not exist only when shutting down.
2. I've made object dump on module in /lib/modules

Reading symbols from /usr/src/linux-3.3.8-gentoo/drivers/net/wireless/rt2x00/rt61pci.ko...(no debugging symbols found)...done.

cat .config | grep RT2X00
CONFIG_RT2X00=y
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_DEBUG=y
Comment 10 dolohow 2012-07-13 12:48:41 UTC
"iwconfig wlan0 power off 

does that workaround the problem ?"
No, it doesn't
Comment 11 Stanislaw Gruszka 2012-07-13 15:15:21 UTC
> Reading symbols from
> /usr/src/linux-3.3.8-gentoo/drivers/net/wireless/rt2x00/rt61pci.ko...(no
> debugging symbols found)...done.
> 
> cat .config | grep RT2X00
> CONFIG_RT2X00=y
> CONFIG_RT2X00_LIB_PCI=m
> CONFIG_RT2X00_LIB=m
> CONFIG_RT2X00_LIB_FIRMWARE=y
> CONFIG_RT2X00_LIB_CRYPTO=y
> CONFIG_RT2X00_LIB_LEDS=y
> CONFIG_RT2X00_DEBUG=y

Kernel has to be compiled with CONFIG_DEBUG_INFO , check that on your .config
Comment 12 dolohow 2012-07-13 17:15:10 UTC
0x37ad is in rt61pci_config (drivers/net/wireless/rt2x00/rt61pci.c:850).
845                                         struct rt2x00lib_conf *libconf)
846     {
847             u16 eeprom;
848             short lna_gain = 0;
849
850             if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
851                     if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags))
852                             lna_gain += 14;
853
854                     rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
Comment 13 Stanislaw Gruszka 2012-07-21 09:52:41 UTC
libconf->conf or libconf->conf->channel is NULL. Unfortunately this is not sufficient information to fix this bug. Begin of the calltrace is missing in photo from comment 3, so it's not possible to tell why NULL pointer is there.

Can you grab the full calltrace using serial console or netconsole ?
Comment 14 dolohow 2012-07-21 11:03:12 UTC
Tell me how to do this and what I need.
Comment 15 Stanislaw Gruszka 2012-07-21 16:21:26 UTC
To use netconsole, you need to have ethernet cable connected to the network and access to second machine in the network. Some documentation is here:

http://www.kernel.org/doc/Documentation/networking/netconsole.txt
https://wiki.ubuntu.com/Kernel/Netconsole

Setup serial console is a bit more difficult, if you do not have this already done it's not wort to bother with that. If you will have troubles to setup netconsole, I'll prepare patch to make call trace shorter, so will be possible to photo all needed information.

One more thing. You did not try 3.4 or 3.5 yet, right? It worth to try them, perhaps bug is already fixed there.
Comment 16 dolohow 2012-07-21 17:03:56 UTC
OK, I try to do this at the end of the week.
Just like I mentioned I wanna make the kernel better, I don't need to use that card, because I've already another one.

By the way, I'm from Poland ;)
Comment 17 dolohow 2012-07-23 13:44:30 UTC
Make a call trace patch, I've got some problem with netconsole.
Comment 18 Stanislaw Gruszka 2012-07-27 13:03:31 UTC
Created attachment 76221 [details]
limit_calltrace_to_10_entries.patch

Patch limiting call trace output.
Comment 19 Stanislaw Gruszka 2012-07-27 13:05:06 UTC
Created attachment 76231 [details]
limit_calltrace_to_10_entries_for_3.3.patch

Same patch for kernel 3.3
Comment 20 dolohow 2012-07-27 13:22:53 UTC
How to apply that patch?
Comment 21 Stanislaw Gruszka 2012-07-28 08:07:23 UTC
On kernel source directory:

patch -p1 < /path/to/patch
Comment 22 dolohow 2012-08-01 14:06:22 UTC
I didn't have much time lately, but
http://i.imgur.com/nh02A.jpg
Comment 23 Stanislaw Gruszka 2012-08-02 13:58:00 UTC
Created attachment 76661 [details]
rt61pci_use_hw_conf.patch

Proposed fix. Does crash gone and device works with this patch?
Comment 24 dolohow 2012-08-02 21:46:08 UTC
Yeah, crash gone and device works fine. Excelent!

Could you provide the same for the newer version of kernel? I suppose problem exist in 3.4 and 3.5 too.
Comment 25 Stanislaw Gruszka 2012-08-03 10:35:51 UTC
Patch do not change for newer kernels. I'll post it soon upstream.
Comment 26 dolohow 2012-08-03 11:11:37 UTC
Post link to commit, thanks.
Comment 27 Florian Mickler 2012-08-20 21:54:40 UTC
A patch referencing this bug report has been merged in Linux v3.6-rc2:

commit deee0214def5d8a32b8112f11d9c2b1696e9c0cb
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Fri Aug 3 12:49:14 2012 +0200

    rt61pci: fix NULL pointer dereference in config_lna_gain

Note You need to log in before you can comment on or make changes to this bug.