arch: x86_64 Intel(R) Atom(TM) CPU 330 @ 1.60GHz GenuineIntel GNU/Linux udev version: 151-r4 lspci: 04:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) 04:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) relevant dmesg part: cx2388x alsa driver version 0.0.8 loaded cx88_audio 0000:04:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], frontend(s): 1 cx88[0]: TV tuner type 63, Radio tuner type -1 cx88/0: cx2388x v4l2 driver version 0.0.8 loaded cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner i2c-core: driver [tuner] using legacy suspend method i2c-core: driver [tuner] using legacy resume method tuner 1-0043: chip found @ 0x86 (cx88[0]) tda9887 1-0043: creating new instance tda9887 1-0043: tda988[5/6/7] found tuner 1-0061: chip found @ 0xc2 (cx88[0]) tveeprom 1-0050: Hauppauge model 96019, rev D6D3, serial# 6219702 tveeprom 1-0050: MAC address is 00:0d:fe:5e:e7:b6 tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133, type 78) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 1-0050: audio processor is CX882 (idx 33) tveeprom 1-0050: decoder processor is CX882 (idx 25) tveeprom 1-0050: has radio, has IR receiver, has IR transmitter cx88[0]: hauppauge eeprom: model=96019 tuner-simple 1-0061: creating new instance tuner-simple 1-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner) cx88[0]/1: CX88x/0: ALSA support for cx2388x boards cx8800 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 cx88[0]/0: found at 0000:04:00.0, rev: 5, irq: 16, latency: 32, mmio: 0xce000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:04:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 cx88[0]/2: found at 0000:04:00.2, rev: 5, irq: 16, latency: 32, mmio: 0xcc000000 cx2388x blackbird driver version 0.0.8 loaded cx88/2: registering cx8802 driver, type: blackbird access: shared cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted cx88[0]/2-bb: Firmware upload successful. cx88[0]/2-bb: Firmware version is 0x02060039 cx88[0]/2: registered device video1 [mpeg] udev created vbi0 and video0, there's no radio0 and video1. /lib64/udev/v4l_id /dev/.tmp-char-81:3 hangs in status D (uninterruptible sleep). I did not upgrade udev while upgrading kernels.
Hi, could you try the patches at <http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/31187>? I'll attach a single combined patch for convenience in testing. If that fixes it, then this is probably a duplicate of <https://bugzilla.kernel.org/show_bug.cgi?id=31962>.
Created attachment 53572 [details] patch from http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/31187
Hi Jonathan. Works on 2.6.38! thanks
Marlon de Boer wrote: > Hi Jonathan. Works on 2.6.38! thanks Thanks for testing; that's great to hear. To the bugzilla people: this is a dup of bug 31962. Regards, Jonathan