Created attachment 307598 [details] short video clip showing distortion Avermedia DVD EZMaker 7 Model: C039 VID:07CA PID:C039 Module used: cx231xx When capturing analog video from my old Hi8 video camera (NTSC M), the captured video has banding and is grainy, it doesn't matter if I capture from the S-Video or Composite, the results are the same. dmesg output: [31173.105709] cx231xx 3-1:1.1: New device AVerMedia TECHNOLOGIES, Inc. AVerMedia C039 USB Pure Capture @ 480 Mbps (07ca:c039) with 7 interfaces [31173.106062] cx231xx 3-1:1.1: can't change interface 4 alt no. to 3: Max. Pkt size = 0 [31173.106065] cx231xx 3-1:1.1: Identified as Conexant VIDEO GRABBER (card=5) [31173.106649] i2c i2c-13: Added multiplexed i2c bus 15 [31173.106704] i2c i2c-13: Added multiplexed i2c bus 16 [31173.214440] cx25840 12-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0) [31175.444434] cx25840 12-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes) [31175.493936] cx231xx 3-1:1.1: v4l2 driver version 0.0.3 [31175.620281] cx231xx 3-1:1.1: Registered video device video2 [v4l2] [31175.620318] cx231xx 3-1:1.1: Registered VBI device vbi0 [31175.620423] cx231xx 3-1:1.1: audio EndPoint Addr 0x83, Alternate settings: 3 [31175.620426] cx231xx 3-1:1.1: video EndPoint Addr 0x84, Alternate settings: 5 [31175.620429] cx231xx 3-1:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2 [31175.620431] cx231xx 3-1:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2 [31175.620433] cx231xx 3-1:1.1: TS EndPoint Addr 0x81, Alternate settings: 6 Any help and/or suggestions would be greatly appreciated. :)