I have an Alienware M18 R1 AMD with a 7945HX cpu that does not complete the boot process when on battery power AND the battery is below about 70%.  If the battery is almost full, it boots fine.  This is repeatable using the live usb of every distro I have tried (Fedora, Ubuntu, Arch).  I have updated the machine to the latest BIOS 1.2.2.

Using a separate disk, I can install and boot into windows 11 without issue.

If I run with acpi=off kernel parameter it will boot but many devices do not work.

I have tried many different kernel parameters to try and fix the issue without success.  As far as the hardware I have tried:

- different hard drives
- disabling hybrid graphics in BIOS
- replacing the battery
- disabling as many devices as I can in the BIOS (wifi, NIC, etc)

When I try to boot with battery < 70%, it gets part way through the booting process and then turns off or reboots.  The logs do not get flushed to disk so I can't for sure tell what the last log entry is.  I have used my phone to try and record the output to the screen before it shuts down but the last entries I can see don't look suspicious.

One other issue that may be related is that after boot, a process is hammering the kernel with system calls, pegging one core to 100%.  I have to run:

echo 'on' > '/sys/bus/usb/devices/usb1/power/control'

To stop it.

I suspect the BIOS has some issues but I do not know how to debug it.  Any tips on what to try would be appreciated.  Below are interesting snippets from my dmesg log of a successful boot while on AC power.


[    0.411367] ACPI: Added _OSI(Module Device)
[    0.411367] ACPI: Added _OSI(Processor Device)
[    0.411367] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.411367] ACPI: Added _OSI(Processor Aggregator Device)
[    0.414709] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPC0.EC0], AE_NOT_FOUND (20221020/dswload2-162)
[    0.414712] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-220)
[    0.414713] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[    0.416508] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.GPP0._PRW], AE_ALREADY_EXISTS (20221020/dswload2-326)
[    0.416510] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-220)
[    0.417296] ACPI: 28 ACPI AML tables successfully acquired and loaded
[    0.417464] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.GPP2.UP00.DP00.U4UP.U4P3.UHI0 (20221020/dspkginit-438)
[    0.417473] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.GPP2.UP00.DP00.U4UP.U4P3.UHI0 (20221020/dspkginit-438)
[    0.417480] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.GPP2.UP00.DP00.U4UP.U4P3.UHI0 (20221020/dspkginit-438)
[    0.417490] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.GPP2.UP00.DP00.U4UP.U4P3.UHI0 (20221020/dspkginit-438)
[    0.417493] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.GPP2.UP00.DP00.U4UP.U4P3.UHI0 (20221020/dspkginit-438)
[    0.420387] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.553196] ACPI: EC: EC started
[    0.553196] ACPI: EC: interrupt blocked
[    0.553205] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.553207] ACPI: \_SB_.PCI0.LPC0.EC__: Boot DSDT EC used to handle transactions
[    0.553208] ACPI: Interpreter enabled
[    0.553218] ACPI: PM: (supports S0 S4 S5)
[    0.553218] ACPI: Using IOAPIC for interrupt routing
[    0.553530] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.554365] [Firmware Info]: PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] not reserved in ACPI motherboard resources
[    0.554367] PCI: not using MMCONFIG
[    0.554369] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.554369] PCI: Ignoring E820 reservations for host bridge windows
[    0.554532] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.555359] ACPI: \_SB_.PCI0.GPP0.PG00: New power resource
[    0.555523] ACPI: \_SB_.PCI0.GPP1.P0NV: New power resource
[    0.555879] ACPI: \_SB_.PCI0.GPP2.PWRS: New power resource
[    0.738240] ACPI: \_SB_.PCI0.GPP2.U4UP.PWRS: New power resource
[    0.743817] ACPI: \_SB_.PCI0.GPP2.U4UP.U4P0.PWRS: New power resource
[    0.744142] ACPI: \_SB_.PCI0.GPP2.U4UP.U4P0.UP0D.PWRS: New power resource
[    0.744312] ACPI: \_SB_.PCI0.GPP2.U4UP.U4P1.PWRS: New power resource
[    0.744637] ACPI: \_SB_.PCI0.GPP2.U4UP.U4P1.UP1D.PWRS: New power resource
[    0.744772] ACPI: \_SB_.PCI0.GPP2.U4UP.U4P2.PWRS: New power resource
[    0.750427] ACPI: \_SB_.PCI0.GPP2.U4UP.U4P2.UXHC.PWRS: New power resource
[    0.753444] ACPI: \_SB_.PCI0.GPP2.U4UP.U4P3.PWRS: New power resource
[    0.754778] ACPI: \_SB_.PCI0.GPP2.U4UP.U4P3.UHI0.PWRS: New power resource
[    0.754833] ACPI: \_SB_.PCI0.GPP3.PWR1: New power resource
[    0.754874] ACPI: \_SB_.PCI0.GPP3.WLAN.WRST: New power resource
[    0.754885] ACPI: \_SB_.PCI0.GPP4.PWR1: New power resource
[    0.754927] ACPI: \_SB_.PCI0.GPP5.PWR1: New power resource
[    0.755050] ACPI: \_SB_.PCI0.GPP7.P0NV: New power resource
[    0.755350] ACPI: \_SB_.PCI0.GPP8.P0NV: New power resource
[    0.755718] ACPI: \_SB_.PCI0.GP17.XHC0.P0U0: New power resource
[    0.756027] ACPI: \_SB_.PCI0.GP17.XHC1.P0U1: New power resource
[    0.756186] ACPI: \_SB_.PCI0.GP17.XHC1.RHUB.PRT1.HB01.BRST: New power resource
[    0.756455] ACPI: \_SB_.PCI0.GP19.XHC2.P0U2: New power resource
[    0.764420] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.764421] ACPI: PCI: Interrupt link LNKA disabled
[    0.764480] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.764481] ACPI: PCI: Interrupt link LNKB disabled
[    0.764538] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.764539] ACPI: PCI: Interrupt link LNKC disabled
[    0.764595] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.764596] ACPI: PCI: Interrupt link LNKD disabled
[    0.764656] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.764657] ACPI: PCI: Interrupt link LNKE disabled
[    0.764713] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.764713] ACPI: PCI: Interrupt link LNKF disabled
[    0.764769] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.764769] ACPI: PCI: Interrupt link LNKG disabled
[    0.764825] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.764826] ACPI: PCI: Interrupt link LNKH disabled
[    0.764889] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.764893] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.764908] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER]
[    0.764930] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR DPC]
[    0.765063] PCI host bridge to bus 0000:00
...

[    1.582598] ACPI: battery: Slot [BAT0] (battery present)
[    1.592457] ACPI: bus type drm_connector registered
[    1.593562] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    1.593578] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 1
[    1.596173] xhci_hcd 0000:07:00.0: hcc params 0x0200ef81 hci version 0x120 quirks 0x0000000200000010
[    1.596455] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    1.596467] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
[    1.596468] xhci_hcd 0000:07:00.0: Host supports USB 3.2 Enhanced SuperSpeed
[    1.596497] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    1.596498] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.596499] usb usb1: Product: xHCI Host Controller
[    1.596500] usb usb1: Manufacturer: Linux 6.3.8-200.fc38.x86_64 xhci-hcd
[    1.596500] usb usb1: SerialNumber: 0000:07:00.0
[    1.596543] hub 1-0:1.0: USB hub found
[    1.596546] hub 1-0:1.0: 2 ports detected
[    1.596621] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.596627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    1.596628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.596629] usb usb2: Product: xHCI Host Controller
[    1.596629] usb usb2: Manufacturer: Linux 6.3.8-200.fc38.x86_64 xhci-hcd
[    1.596630] usb usb2: SerialNumber: 0000:07:00.0
[    1.596655] hub 2-0:1.0: USB hub found
[    1.596657] hub 2-0:1.0: 2 ports detected
[    1.596742] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    1.596755] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
[    1.597085] xhci_hcd 0000:0b:00.3: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410
[    1.597425] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    1.597435] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
[    1.597435] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    1.597445] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    1.597446] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.597447] usb usb3: Product: xHCI Host Controller
[    1.597447] usb usb3: Manufacturer: Linux 6.3.8-200.fc38.x86_64 xhci-hcd
[    1.597447] usb usb3: SerialNumber: 0000:0b:00.3
[    1.597477] hub 3-0:1.0: USB hub found
[    1.597483] hub 3-0:1.0: 2 ports detected
[    1.597595] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.597601] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    1.597602] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.597602] usb usb4: Product: xHCI Host Controller
[    1.597602] usb usb4: Manufacturer: Linux 6.3.8-200.fc38.x86_64 xhci-hcd
[    1.597603] usb usb4: SerialNumber: 0000:0b:00.3
[    1.597626] hub 4-0:1.0: USB hub found
[    1.597632] hub 4-0:1.0: 2 ports detected
[    1.597746] xhci_hcd 0000:0b:00.4: xHCI Host Controller
[    1.597757] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 5
[    1.598095] xhci_hcd 0000:0b:00.4: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410
[    1.598423] xhci_hcd 0000:0b:00.4: xHCI Host Controller
[    1.598432] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 6
[    1.598433] xhci_hcd 0000:0b:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    1.598443] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    1.598443] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.598444] usb usb5: Product: xHCI Host Controller
[    1.598444] usb usb5: Manufacturer: Linux 6.3.8-200.fc38.x86_64 xhci-hcd
[    1.598445] usb usb5: SerialNumber: 0000:0b:00.4
[    1.598478] hub 5-0:1.0: USB hub found
[    1.598480] hub 5-0:1.0: 2 ports detected
[    1.598539] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.598545] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    1.598545] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.598546] usb usb6: Product: xHCI Host Controller
[    1.598546] usb usb6: Manufacturer: Linux 6.3.8-200.fc38.x86_64 xhci-hcd
[    1.598547] usb usb6: SerialNumber: 0000:0b:00.4
[    1.598570] hub 6-0:1.0: USB hub found
[    1.598576] hub 6-0:1.0: 2 ports detected
[    1.598653] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[    1.598665] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 7
[    1.599931] xhci_hcd 0000:0c:00.0: USB3 root hub has no ports
[    1.599933] xhci_hcd 0000:0c:00.0: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
[    1.600269] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[    1.600281] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 8
[    1.600282] xhci_hcd 0000:0c:00.0: Host supports USB 3.0 SuperSpeed
[    1.600297] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    1.600297] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.600298] usb usb7: Product: xHCI Host Controller
[    1.600298] usb usb7: Manufacturer: Linux 6.3.8-200.fc38.x86_64 xhci-hcd
[    1.600298] usb usb7: SerialNumber: 0000:0c:00.0
[    1.600328] hub 7-0:1.0: USB hub found
[    1.600330] hub 7-0:1.0: 1 port detected
[    1.600366] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.600371] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    1.600372] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.600372] usb usb8: Product: xHCI Host Controller
[    1.600373] usb usb8: Manufacturer: Linux 6.3.8-200.fc38.x86_64 xhci-hcd
[    1.600373] usb usb8: SerialNumber: 0000:0c:00.0
[    1.600395] hub 8-0:1.0: USB hub found
[    1.600396] hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.600414] usbcore: registered new interface driver usbserial_generic
[    1.600417] usbserial: USB Serial support registered for generic
[    1.600430] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.600431] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.605533] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.605563] mousedev: PS/2 mouse device common for all mice
...

[    2.109581] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[    2.208306] wmi_bus wmi_bus-PNP0C14:00: WQ00 data block query control method not found
[    2.209158] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[    2.211878] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    2.211931] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    2.211981] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    2.225682] r8169 0000:0a:00.0 eth0: RTL8125B, c4:cb:e1:42:a3:af, XID 641, IRQ 82
[    2.225684] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    2.228538] usb 6-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.63
[    2.228541] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.228542] usb 6-1: Product: USB3.0 Hub             
[    2.228543] usb 6-1: Manufacturer: VIA Labs, Inc.         
[    2.228543] usb 6-1: SerialNumber: 000000000
[    2.249576] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    2.249578] nvme 0000:03:00.0: platform quirk: setting simple suspend
[    2.249603] nvme 0000:04:00.0: platform quirk: setting simple suspend
[    2.249620] nvme nvme1: pci function 0000:03:00.0
[    2.249621] nvme nvme0: pci function 0000:02:00.0
[    2.249639] nvme nvme2: pci function 0000:04:00.0
[    2.250388] ACPI Warning: \_SB.PCI0.GPP8._PRT: Return Package has no elements (empty) (20221020/nsprepkg-94)
[    2.254508] nvme nvme1: missing or invalid SUBNQN field.
[    2.254531] nvme nvme1: Shutdown timeout set to 10 seconds
[    2.254654] hub 6-1:1.0: USB hub found
[    2.254943] hub 6-1:1.0: 4 ports detected
[    2.256154] nvme nvme1: 8/0/0 default/read/poll queues
[    2.256786] nvme nvme1: Ignoring bogus Namespace Identifiers
[    2.257706] ccp 0000:0b:00.2: tee enabled
[    2.257714] ccp 0000:0b:00.2: psp enabled
[    2.257946]  nvme1n1: p1 p2 p3
[    2.289854] nvme nvme2: allocated 64 MiB host memory buffer.
[    2.292896] nvme nvme0: 32/0/0 default/read/poll queues
[    2.297708]  nvme0n1: p1 p2 p3
[    2.308967] nvme nvme2: 8/0/0 default/read/poll queues
[    2.356007] input: DELL0C4B:00 06CB:CEFB Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-DELL0C4B:00/0018:06CB:CEFB.0001/input/input5
[    2.356068] input: DELL0C4B:00 06CB:CEFB Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-DELL0C4B:00/0018:06CB:CEFB.0001/input/input6
[    2.356126] hid-generic 0018:06CB:CEFB.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0C4B:00 06CB:CEFB] on i2c-DELL0C4B:00
[    2.357325] r8169 0000:0a:00.0 enp10s0: renamed from eth0
[    2.384433] BTRFS: device label fedora_localhost-live devid 1 transid 226 /dev/nvme0n1p3 scanned by (udev-worker) (681)
[    2.448454] BTRFS: device label fedora_localhost-live devid 1 transid 39604 /dev/nvme1n1p3 scanned by (udev-worker) (664)
[    2.480988] input: DELL0C4B:00 06CB:CEFB Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-DELL0C4B:00/0018:06CB:CEFB.0001/input/input8
[    2.481039] input: DELL0C4B:00 06CB:CEFB Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-DELL0C4B:00/0018:06CB:CEFB.0001/input/input9
[    2.481071] hid-multitouch 0018:06CB:CEFB.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0C4B:00 06CB:CEFB] on i2c-DELL0C4B:00

[    2.481071] hid-multitouch 0018:06CB:CEFB.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0C4B:00 06CB:CEFB] on i2c-DELL0C4B:00
[    2.514519] tsc: Refined TSC clocksource calibration: 2495.305 MHz
[    2.514524] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7e6a7dae, max_idle_ns: 440795259198 ns
[    2.514607] clocksource: Switched to clocksource tsc
[    2.631117] ucsi_acpi USBC000:00: UCSI_GET_PDOS failed (-95)
[    2.662408] ucsi_acpi USBC000:00: UCSI_GET_PDOS failed (-95)
[    2.732041] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.732405] ACPI: video: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    2.759879] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input11
[    2.760399] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.765216] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input12
[    2.811346] usb 5-1.2: new full-speed USB device number 3 using xhci_hcd
[    2.965223] ucsi_acpi USBC000:00: UCSI_GET_PDOS failed (-95)
[    2.977552] usb 5-1.2: New USB device found, idVendor=0489, idProduct=e0e3, bcdDevice= 0.01
[    2.977555] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.998672] ucsi_acpi USBC000:00: UCSI_GET_PDOS failed (-95)
[    3.054449] BTRFS info (device nvme0n1p3): using crc32c (crc32c-intel) checksum algorithm
[    3.054454] BTRFS info (device nvme0n1p3): using free space tree
[    3.076889] BTRFS info (device nvme0n1p3): enabling ssd optimizations
[    3.076891] BTRFS info (device nvme0n1p3): auto enabling async discard
[    3.076891] BTRFS info (device nvme0n1p3): start tree-log replay
[    3.170018] usb 5-1.3: new full-speed USB device number 4 using xhci_hcd
[    3.282943] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.334514] usb 5-1.3: New USB device found, idVendor=0d62, idProduct=aab0, bcdDevice=33.09
[    3.334517] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.334518] usb 5-1.3: Product: Keyboard
[    3.334518] usb 5-1.3: Manufacturer: DELL Technologies
[    3.396606] input: DELL Technologies Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/usb5/5-1/5-1.3/5-1.3:1.0/0003:0D62:AAB0.0002/input/input13
[    3.448623] hid-generic 0003:0D62:AAB0.0002: input,hiddev96,hidraw1: USB HID v1.10 Keyboard [DELL Technologies Keyboard] on usb-0000:0b:00.4-1.3/input0
[    3.498985] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[    3.575147] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[    3.575353] usb 5-1.4: new full-speed USB device number 5 using xhci_hcd
[    3.744479] usb 5-1.4: New USB device found, idVendor=187c, idProduct=0551, bcdDevice= 2.00
[    3.744480] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.744481] usb 5-1.4: Product: AW-ELC
[    3.744482] usb 5-1.4: Manufacturer: Alienware
[    3.744482] usb 5-1.4: SerialNumber: 00.01
[    3.847577] hid-generic 0003:187C:0551.0003: hiddev97,hidraw2: USB HID v1.11 Device [Alienware AW-ELC] on usb-0000:0b:00.4-1.4/input0
...
[    6.430156] dell_smbios: Unable to run on non-Dell system