Created attachment 296113 [details] hwinfo Internal speakers Bang & Olufsen on 11th gen processor (Tiger Lake) HP Spectre X360 Convertible model 13-aw2025na don't work at all. Where are the Linux kernel drivers for Bang & Olufsen speakers? I can see /dev/snd/hwC0D2 and /dev/snd/by-path/pci-0000\:00\:1f.3-platform-skl_hda_dsp_generic marian@HPSpectre:~$ inxi -A Audio: Device-1: Intel Tiger Lake-LP Smart Sound Audio driver: sof-audio-pci-intel-tgl Sound Server: ALSA v: k5.12.0-051200rc4-generic marian@HPSpectre:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sofhdadsp [sof-hda-dsp], device 1: HDMI1 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: sofhdadsp [sof-hda-dsp], device 2: HDMI2 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI3 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 I reported to HP , Bang & Olufsen. I will report to kernel bugzilla and ubuntu bugzilla.
Created attachment 296115 [details] dmesg
Created attachment 296117 [details] lsmod
Created attachment 296119 [details] inxi
System is kubuntu 21.04 (hirsute) marian@HPSpectre:~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=21.04 DISTRIB_CODENAME=hirsute DISTRIB_DESCRIPTION="Ubuntu Hirsute Hippo (development branch)" I tested kubuntu 20.10. The same problem there.
marian@HPSpectre:~$ uname -a Linux HPSpectre 5.12.0-051200rc4-generic #202103212230 SMP Sun Mar 21 22:33:27 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
This upstream kernel (without ubuntu patches) tested https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.12-rc4/
I think that Intel is working to add support for this hw (adding to Cc:): [ 7.014624] sof-audio-pci-intel-tgl 0000:00:1f.3: No SoundWire machine driver found [ 7.014627] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 4 [ 7.014629] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 7.014632] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2 Please, attach also output from 'alsa-info.sh --no-upload'.
Created attachment 296129 [details] alsa info --no-upload
Regarding "I think that Intel is working to add support for this hw" I believe more likely the situation is the wrong default fallback driver in the absence of the right one was automatically picked up for the job.
I have read https://askubuntu.com/questions/873881/how-to-install-bang-and-olufsen-audio-drivers-for-hp-laptop I noticed hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x67 hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x3000 Jaroslav, can you suggest any magic hack or workaround with hda-verb for me, please?
Created attachment 296131 [details] lspci -kv
See also https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1921632
HDAJackRetask could be a workaround? https://askubuntu.com/questions/899021/how-to-fix-bang-and-olufsen-audio-for-hp-laptops/1120269#1120269 Can you advise?
Created attachment 296133 [details] hdajackretask
I reported the problem to HP too, I have a low expectation from them though. "Your case Number 5063719540 has been created with the following details: HP Case Number: 5063719540 Serial Number: 5CD0452VRQ Product Number: 2G2D8EA Product Description: HP Spectre x360 Convertible Laptop PC 13-aw2000 (8UY97AV) CRM:0000498703759 "
Created attachment 296135 [details] Recovery mode kernel followed by root shell
Do I need to copy a firmware manually from https://github.com/thesofproject/sof to /lib/firmware/intel/sof/
This is suspicious: [ 7.360051] soundwire sdw-master-1: Slave Entry not found [ 7.382409] soundwire sdw-master-0: Slave Entry not found [ 9.378541] soundwire sdw:1:25d:1308:0:0: Probe not complete, timed out [ 9.378546] soundwire sdw:1:25d:1308:0:0: Update Slave status failed:-110 [ 9.410601] soundwire sdw:0:25d:711:0:0: Probe not complete, timed out [ 9.410604] soundwire sdw:0:25d:711:0:0: Update Slave status failed:-110 in the output from marian@HPSpectre:~/kernel$ sudo dmesg | grep 'audio\|sound' [ 7.226385] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 7.226399] sof-audio-pci-intel-tgl 0000:00:1f.3: SoundWire enabled on CannonLake+ platform, using SOF driver [ 7.226412] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) [ 7.226552] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 7.226606] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 7.236681] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode [ 7.270725] sof-audio-pci-intel-tgl 0000:00:1f.3: No SoundWire machine driver found [ 7.270727] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 4 [ 7.270728] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 7.270731] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2 [ 7.357369] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 1:6:0-18fab [ 7.357373] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:17:0 Kernel ABI 3:18:0 [ 7.360051] soundwire sdw-master-1: Slave Entry not found [ 7.364918] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:17:0 Kernel ABI 3:18:0 [ 7.372458] sof-audio-pci-intel-tgl 0000:00:1f.3: ASoC: Parent card not yet available, widget card binding deferred [ 7.382409] soundwire sdw-master-0: Slave Entry not found [ 7.403474] input: sof-hda-dsp HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input29 [ 7.403508] input: sof-hda-dsp HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input30 [ 7.403534] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input31 [ 9.378541] soundwire sdw:1:25d:1308:0:0: Probe not complete, timed out [ 9.378546] soundwire sdw:1:25d:1308:0:0: Update Slave status failed:-110 [ 9.410601] soundwire sdw:0:25d:711:0:0: Probe not complete, timed out [ 9.410604] soundwire sdw:0:25d:711:0:0: Update Slave status failed:-110
linux/drivers/soundwire/bus.c:774 dev_err(bus->dev, "Slave Entry not found\n"); linux/drivers/soundwire/bus.c:1659 dev_err(&slave->dev, "Probe not complete, timed out\n"); linux/drivers/soundwire/bus.h:8 #define DEFAULT_PROBE_TIMEOUT 2000 //This is in jiffies or msecs? //I would like kernel with this to be hardcoded 10 times bigger for a test or // configurable in kernel config. linux/sound/soc/sof/sof-audio.c:456 dev_err(sdev->dev, "error: no matching ASoC machine driver found - aborting probe\n");
Is this a problem, kernel and firmware ABI versions not matching? [ 7.357373] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:17:0 Kernel ABI 3:18:0
Solved upstream, see https://github.com/thesofproject/linux/issues/2700#issuecomment-805954898 You will need to add a couple of patches to v5.12-rc4 that will only be in 5.13 due to review delays.
Hi Pierre. 6558b66 f6594cd bb85d7e 925c612 717a8fd Did you apply the patches for any of the stable branches? https://git.kernel.org/pub/scm/linux/kernel/git/bwh/linux-stable.git https://git.kernel.org/pub/scm/linux/kernel/git/bwh/linux-stable-queue.git https://git.kernel.org/pub/scm/linux/kernel/git/bwh/linux-stable-rc.git Where did you apply them? Maybe I can convince ubuntu kernel maintainers to include patches for ubuntu 21.04 kernel release.
Even before a patch review, can you please provide an experimental build, a binary (dpkg for kernel and modules) so I can test it and validate it on my model? They had slightly different HP models in the upstream report.
the patches are in the SoundWire maintainer tree git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git I don't have the bandwidth to provide and support a build, sorry. If you want the latest code you should try our development branch (v5.12-rc4 + audio/SoundWire next + SOF next next) https://github.com/thesofproject/linux
I am not sure if I understand what to do. I have never done exactly this. What is 'next' and 'next next'. Is soundwire a branch or separate project? Can you outline or confirm steps? 1) git clone https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ 2) git checkout v5.12-rc4 3) git merge git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git
yes, or you can also cherry-pick patches, no need to make things more complicated than they need to be. git clone https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ git remote add soundwire git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git git fetch soundwire git cherry-pick 6558b66 git cherry-pick f6594cd
I merged soundwire patches git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git with 5.12rc5 and built kernel: https://drive.google.com/drive/folders/1WnotWnHgHe5EM7x49JmmZhNzxJiBW8AV/ I still don't have audio. Do I need this too ? https://github.com/alsa-project/alsa-ucm-conf
Ok. I got it working. I built from here. git clone https://github.com/thesofproject/linux.git with CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m I uploaded my kernel debian/ubuntu packages to https://drive.google.com/drive/folders/1L9DpjMamc37tZ19s5u_4RfmV221F4222?usp=sharing Affected Spectre X360 laptop users can install this kernel directly in the meantime before patches make it to the mainline kernel and distros. Also this needs to be installed: user1@HPSpectre:~/dev$ git clone https://github.com/alsa-project/alsa-ucm-conf.git sudo apt remove alsa-ucm-conf cd /usr/share/alsa/ sudo ln -s "$HOME/dev/alsa-ucm-conf/ucm2" ucm2 reboot
(In reply to Pierre Bossart from comment #21) > Solved upstream, see > https://github.com/thesofproject/linux/issues/2700#issuecomment-805954898 > > You will need to add a couple of patches to v5.12-rc4 that will only be in > 5.13 due to review delays. Hi Pierre 5.12 is released. Is 5.13 two weeks merge window now for this to go upstream?
v5.1(In reply to Marian Klein from comment #29) > (In reply to Pierre Bossart from comment #21) > > Solved upstream, see > > https://github.com/thesofproject/linux/issues/2700#issuecomment-805954898 > > > > You will need to add a couple of patches to v5.12-rc4 that will only be in > > 5.13 due to review delays. > Hi Pierre > 5.12 is released. Is 5.13 two weeks merge window now for this to go upstream? I see the patches in Linus' tree already tag: soundwire-5.13-rc1 SHA1: f6594cdfec4cde57484812271696fb9f40d125b7 5.13-rc1 is likely to be tagged next Sunday
Created attachment 296721 [details] 5.13rc1 alsa-info sound devices not found
It does NOT work. I tried. https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.13-rc1/ (upstream linux kernel, no ubuntu patches)
(In reply to Marian Klein from comment #32) > It does NOT work. I tried. > https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.13-rc1/ > (upstream linux kernel, no ubuntu patches) please attach dmesg with dynamic debug enabled for SOF and SoundWire.
Created attachment 296735 [details] dmesg with dyn debug for sof enabled As specified in https://github.com/thesofproject/linux/issues/2700 I copied https://github.com/thesofproject/linux/files/5837691/ddebug.txt to /etc/modprobe.d/sof-dyndbg.conf and rebooted
I see nothing really wrong, so I suspect the usual silent fails that come from not having enabled the machine driver. Can you make sure this is enabled? CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m
Looks like you are right, I can see nothing in marian@HPSpectre:/boot$ cat config-5.13.0-051300rc1-generic | grep CONFIG_SND_SOC_INTEL_SOUNDWIRE_ This is not a kernel under my control. I did not build it. The whole point of this exercise is that ubuntu builds something (either with or without their patches) that works out of the box. Any idea how to communicate to ubuntu they should enable the module for the rc2 https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.13-rc2 and for their proper ubuntu kernels? CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m
Ubuntu support SoundWire in their OEM kernels, it's likely an oversight on their side Hui Wang <hui.wang@canonical.com> might be able to help.
Is this supposed to work on Spectre 360 13t-aw200 as of kernel 5.15.2? Or is 13t-aw200 a different machine? I'm asking b/c it doesn't. The soundcard is detected but Pulse says speakers are not available, while headphones are -- with no headphones plugged in. When they are plugged in there's no sound in them either. Please see dmesg/pactl/lshw attached
Created attachment 299619 [details] dmesg of 13t-aw200
Created attachment 299621 [details] lshw of 13t-aw200
Created attachment 299623 [details] pactl of 13t-aw200
I used the latest ucm2
(In reply to Oleg Mikheev from comment #38) > Is this supposed to work on Spectre 360 13t-aw200 as of kernel 5.15.2? Or is > 13t-aw200 a different machine? > I'm asking b/c it doesn't. > The soundcard is detected but Pulse says speakers are not available, while > headphones are -- with no headphones plugged in. When they are plugged in > there's no sound in them either. > Please see dmesg/pactl/lshw attached I have one of these HP platforms and did find a mistake for jack detection. I fixed it here: https://github.com/thesofproject/linux/pull/3195 and this is in Mark Brown's for-next branch, see commit 0527b19fa4f390a6054612e1fa1dd4f8efc96739 This patch is not in 5.15, but my expectation is that this fix will land in linux-stable at some point. In the mean time it wouldn't hurt if you could give it a try to see if this fixes the problem for you.
> This patch is not in 5.15, but my expectation is that this fix will land in > linux-stable at some point. In the mean time it wouldn't hurt if you could > give it a try to see if this fixes the problem for you. Forgot to mention that you can use a kernel module parameter to modify the jack detection - no need to apply the patch. What you need to do is find out the existing value and replace JD1 by JD2. options snd_soc_sof_sdw quirk=0x<insert value here?
(In reply to Pierre Bossart from comment #43) > I have one of these HP platforms and did find a mistake for jack detection. > > I fixed it here: > https://github.com/thesofproject/linux/pull/3195 I patched my sof_sdw and it indeed fixes jack detection. Thanks!!! It doesn't give me sound though, but it's a step in the right direction
Usually I try a manual test without PulseAudio to check that the UCM settings are correct, e.g. (off the top of my head, check actual settings for card name and endpoint name) alsaucm -c sof-soundwire set _verb HiFi set _enadev Speaker speaker-test -Dhw:0,2 -c2 -r48000 alsaucm -c sof-soundwire set _verb HiFi set _enadev Headphone speaker-test -Dhw:0,0 -c2 -r48000
I think this bug was fixed with Alsa 1.2.5. I have an HP Spectre x360 13t-aw200 that had been demonstrating the issue with Ubuntu (all versions from bionic to jammy use alsa-base 1.0.25). I decided to try Fedora (alsa-lib 1.2.6) and my speakers and microphone worked right out of the box.
Yes, with 5.15 and fedora this platform is well supported. Other distros might still need patches.
(In reply to Pierre Bossart from comment #43) > (In reply to Oleg Mikheev from comment #38) > I fixed it here: > https://github.com/thesofproject/linux/pull/3195 Not in 5.16 :(
also after upgrading alsa-lib from 1.2.4 to 1.2.5 I get Dummy Output instead of Tiger Lake-LP Smart Sound Technology Audio Controller Stereo
(In reply to Pierre Bossart from comment #46) > Usually I try a manual test without PulseAudio to check that the UCM > settings are correct, e.g. (off the top of my head, check actual settings > for card name and endpoint name) > > alsaucm -c sof-soundwire set _verb HiFi set _enadev Speaker > speaker-test -Dhw:0,2 -c2 -r48000 > alsaucm -c sof-soundwire set _verb HiFi set _enadev Headphone > speaker-test -Dhw:0,0 -c2 -r48000 This does generate noise properly. I guess it's Pulse issue then?
( 2.463| 0.000) D: [pulseaudio] alsa-util.c: Trying _ucm0006.hw:sofsoundwire,3 with SND_PCM_NO_AUTO_FORMAT ... ( 2.463| 0.000) D: [pulseaudio] alsa-util.c: Managed to open _ucm0006.hw:sofsoundwire,3 ( 2.463| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument ( 2.463| 0.000) D: [pulseaudio] alsa-util.c: Trying _ucm0006.hw:sofsoundwire,3 without SND_PCM_NO_AUTO_FORMAT ... ( 2.463| 0.000) D: [pulseaudio] alsa-util.c: Managed to open _ucm0006.hw:sofsoundwire,3 ( 2.463| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument ( 2.463| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:SLAVE='_ucm0006.hw:sofsoundwire,3' with SND_PCM_NO_AUTO_FORMAT ... ( 2.463| 0.000) I: [pulseaudio] pcm.c: Unknown PCM _ucm0006.hw:sofsoundwire,3 ( 2.464| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device plug:SLAVE='_ucm0006.hw:sofsoundwire,3': No such file or directory ( 2.673| 0.209) D: [pulseaudio] alsa-mixer.c: Profile set 0x55ce07761310, auto_profiles=no, probed=yes, n_mappings=0, n_profiles=0, n_decibel_fixes=0 ( 2.673| 0.000) E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. ( 2.674| 0.000) E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-sof_sdw" card_name="alsa_card.pci-0000_00_1f.3-platform-sof_sdw" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. ( 2.674| 0.000) I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-sof_sdw) failed to load module. ( 2.674| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes ( 2.675| 0.000) D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0 is busy: no ( 2.675| 0.000) W: [pulseaudio] module-udev-detect.c: Tried to configure /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-sof_sdw) more often than 5 times in 10s
(In reply to Oleg Mikheev from comment #49) > (In reply to Pierre Bossart from comment #43) > > (In reply to Oleg Mikheev from comment #38) > > I fixed it here: > > https://github.com/thesofproject/linux/pull/3195 > > Not in 5.16 :( jack detection was added in linux stable today, [PATCH 5.16 0444/1039] ASoC: Intel: sof_sdw: fix jack detection on HP Spectre x360 convertible
(In reply to Oleg Mikheev from comment #50) > also after upgrading alsa-lib from 1.2.4 to 1.2.5 I get Dummy Output instead > of Tiger Lake-LP Smart Sound Technology Audio Controller Stereo this got resolved by upgrading sof-bin to 1.9.1
So I reported the problem 2 years ago and the laptop worked well for me since then until the laptop broke 2 weeks ago and I had to send it for repair. It came back with ´backslash and pipe´ key and keyboard not working in linux and windows (I tested it is now a right ctrl and I use remap in windows and another UK layout in KDE as workaroudn) and built-in audio not working on linux only (it works in windows). I can only use bluetooth samsung earbuds with laptop. I believed in repair shop they updated bios and did something with board. The original kernel which worked for audio does not work when it came back. I moved to kubuntu 13.04 due to be released next week and stock kernel 6.2 does not work. I can see 3 options in audio volume (KDE) and I can see For playback Tiger Lake-LP Smart Sound Technology Audio Controller Pro Pro 2 Pro 3 And for microphone I have two Tiger Lake-LP Smart Sound Technology Audio Controller Pro 6 Tiger Lake-LP Smart Sound Technology Audio Controller Pro 7 and I can see moving the volume indicator when I play something on youtube, but I cannot hear anything. I can see moving volume indicator for microphone when I talk. I tried to redo instructions in comment 28: git clone https://github.com/thesofproject/linux.git and I got kernel marian@HPSpectre:~$ uname -a Linux HPSpectre 6.3.0-rc3+ #3 SMP PREEMPT_DYNAMIC Sun Apr 23 16:01:00 BST 2023 x86_64 x86_64 x86_64 GNU/Linux I still get no sound. Jaroslav or Pierre, can you help , please?
Created attachment 304178 [details] Alsa info for kernel 6.3.0-rc3+ from https://github.com/thesofproject/linux.git
Created attachment 304179 [details] KDE audio volume seems to show something , I can hear nothing though
I also got topology file from https://github.com/thesofproject/linux/files/5912926/sof-tgl-rt711-rt1308-2ch.tplg.gz I unpacked it and copied to /lib/firmware/intel/sof-tplg/ overwriting a previous file there. It is still no effect. Can you advise how to get a new topology file, please? Also how to diagnose situation, please? Shall I look into windows how it is configured, please?
Also version of firmware: marian@HPSpectre:/lib/firmware/intel/sof-tplg$ apt show firmware-sof-signed Package: firmware-sof-signed Version: 2.2.4-1 Priority: optional Section: kernel Source: firmware-sof Origin: Ubuntu Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com> Original-Maintainer: Mark Pearson <mpearson-lenovo@squebb.ca> Bugs: https://bugs.launchpad.net/ubuntu/+filebug Installed-Size: 18.0 MB Homepage: https://github.com/thesofproject/sof-bin I am looking into https://github.com/thesofproject/linux/issues/2985 but cannot see what should I do
https://github.com/thesofproject/linux/issues/3300
When I disable my bluetooth ear buds. then I record something arecord -f cd > my.wav then I enable my bluetooth ear buds and set it in audio speaker then aplay my.wav I can hear the recording. I can conclude the laptop built-in microphone with alsa works.
when I kill /usr/bin/pipewire-pulse and run marian@HPSpectre:/usr/bin$ pulseaudio W: [pulseaudio] pid.c: Stale PID file, overwriting. E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. W: [pulseaudio] module-udev-detect.c: Tried to configure /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic) more often than 5 times in 10s
Created attachment 304180 [details] missing some fields in bios settings when using HP BCU when using the tools from https://ftp.ext.hp.com/pub/caps-softpaq/cmit/HP_BCU.html and then BiosConfigUtility64.exe /get:"mybios.txt" I get the file attached Mote empty fields for Build ID,Serial Number,Product Name,System Board CT Number Can the missing bios field make the kernel (SOF) to pick the wrong topology file that cause not to hear anything? Unfortunately I don't know the settings before my laptop was in repair.
From the alsa-info log, I can see that the machine driver selection goes sideways. The auto detection fails to find a SoundWire board, so I am not sure what would work. Clearly the BIOS was changed since there's nothing that looks like the original DMI that was used to configure the SoundWire machine driver for jack detection. Please re-open a new SOF issue, this will be easier to track for us. Thanks!
I already made an entry at your home SOF bug tracker. https://github.com/thesofproject/linux/issues/4323 It is easier to add attachments here.