I got an Asus Zephyrus G14 GA401IH-HE003 with AMD Ryzen 7 4800HS and a NVIDIA GeForce GTX 1650. I am use 5.9.8-050908-generic kernel from (kernel.ubuntu.com/~kernel-ppa/mainline/v5.9.8/) dmamchyts@ga401ih:~$ cat /etc/os-release NAME="Ubuntu" VERSION="20.10 (Groovy Gorilla)" I have some problem with notebook speakers. When I use headphones via 3.5 jack - all works fine. I can control sound level (from low to high). But when I try to listen to any sounds from notebook speakers - volume always has a high level (I think it's a max level of notebook speakers sound). I am using KDE, and I hear a sound level of 5% the same as 100%. dmamchyts@ga401ih:/sys/class/hwmon/hwmon6$ aplay -l **** List of PLAYBACK Hardware Devices **** card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic_1 [HD-Audio Generic], device 0: ALC289 Analog [ALC289 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 alsa-info.sh http://alsa-project.org/db/?f=ac666b03be5c051041408a6bf81f2de46f167353
If you change the volume slider, can you see any changes in /proc/asound/card1/codec#0 file? Also, try to change the volume in alsamixer or aplay (alsamixer -c 1).
No any difference in /proc/asound/card1/codec#0 when I change volume slider. Output of /proc/asound/card1/codec#0 : dmamchyts@ga401ih:~$ cat /proc/asound/card1/codec#0 Codec: ATI R6xx HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x1002aa01 Subsystem Id: 0x00aa0100 Revision Id: 0x100700 No Modem Function Group found Default PCM: rates [0x70]: 32000 44100 48000 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 CLKSTOP EPSS Power: setting=D0, actual=D0, Clock-stop-OK GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x02 Node 0x04 [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000094: OUT Detect HDMI Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Node 0x06 [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000094: OUT Detect HDMI Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x06 Node 0x08 [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000094: OUT Detect HDMI Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x08 Node 0x0a [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000094: OUT Detect HDMI Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0a Node 0x0c [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000094: OUT Detect HDMI Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0c About alsamixer: I try to follow https://wiki.ubuntu.com/Audio/Alsamixer - no any changes when I press arrow keys.
Sorry, it appears that we should try card0 - /proc/asound/card0/codec#0 and 'alsamixer -c 0'.
no card0 dmamchyts@ga401ih:/tmp$ ll /proc/asound/ total 0 dr-xr-xr-x 16 root root 0 Nov 25 13:31 ./ dr-xr-xr-x 393 root root 0 Nov 25 13:31 ../ dr-xr-xr-x 6 root root 0 Nov 25 13:31 card1/ dr-xr-xr-x 6 root root 0 Nov 25 13:31 card2/ -r--r--r-- 1 root root 0 Nov 25 13:53 cards -r--r--r-- 1 root root 0 Nov 25 13:53 devices lrwxrwxrwx 1 root root 5 Nov 25 19:39 Generic -> card1/ lrwxrwxrwx 1 root root 5 Nov 25 19:39 Generic_1 -> card2/ -r--r--r-- 1 root root 0 Nov 25 19:39 hwdep -r--r--r-- 1 root root 0 Nov 25 19:39 modules dr-xr-xr-x 4 root root 0 Nov 25 13:53 oss/ -r--r--r-- 1 root root 0 Nov 25 13:53 pcm dr-xr-xr-x 6 root root 0 Nov 25 19:39 seq/ -r--r--r-- 1 root root 0 Nov 25 13:53 timers -r--r--r-- 1 root root 0 Nov 25 13:53 version dmamchyts@ga401ih:/tmp$ alsamixer -c 0 invalid card index: 0 try `alsamixer --help' for more information
Ok, then try card2.. card1 is HDMI.. /proc/asound/card2/codec#0 and 'alsamixer -c 2'
Diff with 0 level and min (5%): --- Clipboard +++ Selection @@ -132,7 +132,7 @@ Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-Out vals: [0x80 0x80] + Amp-Out vals: [0x00 0x00] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A @@ -164,7 +164,7 @@ Control: name="Bass Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-Out vals: [0x80 0x80] + Amp-Out vals: [0x00 0x00] Pincap 0x0000001c: OUT HP Detect Pin Default 0x90170120: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown Full output (min): Codec: Realtek ALC289 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0289 Subsystem Id: 0x10431f11 Revision Id: 0x100002 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=3, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC289 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x540]: 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x411: Stereo Converter: stream=5, channel=0 PCM: rates [0x40]: 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x40]: 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x24 Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC289 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x27 0x27] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Control: name="Internal Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x90a60140: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40000000: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x0 Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x02 Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000001c: OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x02* 0x03 Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Bass Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000001c: OUT HP Detect Pin Default 0x90170120: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 3 0x02 0x03 0x06* Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x01 0x01] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00013734: IN OUT EAPD Detect Vref caps: HIZ 50 GRD 80 100 EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x02* 0x03 Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40663a45: [N/A] Modem Line at Ext N/A Conn = Digital, Color = Blue DefAssociation = 0x4, Sequence = 0x5 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=142 Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x03211030: [Jack] HP Out at Ext Left Conn = 1/8, Color = Black DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x02 0x03* Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x19 0x1a 0x1b 0x1d 0x13 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] Connection: 5 0x19 0x1a 0x1b 0x1d 0x12 Node 0x24 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x12* 0x13 0x18 Some screenshots: https://www.dropbox.com/s/0udpru8eb98rgap/no-sound.png?dl=0 https://www.dropbox.com/s/852dtk50sj51rdu/min-sound.png?dl=0 When I set min volume level (5%) - I can change sound level by changing PCM. So when I change level in PCM column - speaker's volume also changed
Could you try also to raise the Master volume up (in alsamixer)? The "Amp-Out vals" in Node 0x02 (Speaker Playback Volume) should change, too.
No sound - Master shows 0 level, Speaker shows 0, PCM shows 0 Min sound (5%) - Master shows 0 level, Speaker shows 58, PCM shows 100 Sound +1 step (10%) - Master shows 2 level, Speaker shows 100, PCM shows 100 Sound +2 step (15%) - Master shows 7 level, Speaker shows 100, PCM shows 100 Sound +3 step (20%) - Master shows 13 level, Speaker shows 100, PCM shows 100 .... Sound +n step (100%) - Master shows 100 level, Speaker shows 100, PCM shows 100 After 5% level - Speaker always has a high level
Just now I noticed that the microphone does not work. I try check it in Skype/Viber. Ubuntu also doesn't show microphone in playback devices: "No Recording devices available"
My wild guess is the bass speaker connected to DAC NID 0x06, which as no volume control. When you run like below, does the volume become normal? hda-verb /dev/snd/hwC2D0 0x17 SET_CONNECT 0x00
Yes, your command fix issue with speaker. Now I volume regulation works. Thank you.
What about microphone? I must create new issue?
(In reply to Dmitry Mamchyts from comment #11) > Yes, your command fix issue with speaker. > Now I volume regulation works. Thank you. OK, then we need to add a quick to change the routing for this device. (In reply to Dmitry Mamchyts from comment #12) > What about microphone? I must create new issue? Please give alsa-info.sh output taken during your recording test. Also, give the full dmesg output. I wonder what's missing in the first card slot (card0).
Some helpfully info: dmamchyts@ga401ih:~$ arecord -l **** List of CAPTURE Hardware Devices **** card 2: Generic_1 [HD-Audio Generic], device 0: ALC289 Analog [ALC289 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Check recording: dmamchyts@ga401ih:~$ arecord -f S16_LE -d 10 -r 16000 --device="hw:2,0" /tmp/test-mic.wav Recording WAVE '/tmp/test-mic.wav' : Signed 16 bit Little Endian, Rate 16000 Hz, Mono arecord: set_params:1349: Channels count non available Your ALSA information is located at http://alsa-project.org/db/?f=d0704708a4e3a8bf9ff64516f92a2afb39a53574 Full dmesg output: https://www.dropbox.com/s/g9lqj39ofiran5g/dmesg?dl=0
(In reply to Dmitry Mamchyts from comment #14) > Check recording: > > dmamchyts@ga401ih:~$ arecord -f S16_LE -d 10 -r 16000 --device="hw:2,0" > /tmp/test-mic.wav > Recording WAVE '/tmp/test-mic.wav' : Signed 16 bit Little Endian, Rate 16000 > Hz, Mono > arecord: set_params:1349: Channels count non available You have to pass -c2. Or use plughw:2,0 instead of hw:2,0.
You are right. dmamchyts@ga401ih:~$ arecord -f S16_LE -d 10 -r 16000 --device="hw:2,0" -c2 /tmp/test-mic.wav Recording WAVE '/tmp/test-mic.wav' : Signed 16 bit Little Endian, Rate 16000 Hz, Stereo Warning: rate is not accurate (requested = 16000Hz, got = 44100Hz) please, try the plug plugin dmamchyts@ga401ih:~$ aplay /tmp/test-mic.wav Playing WAVE '/tmp/test-mic.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo All work fine. A file test-mic.wav contains sounds from microphone. PS. But Ubuntu doesn't show microphone in playback devices: "No Recording devices available"
The microphone isn't for a playback... For the rest issue, ask Ubuntu at first. Once after you identify that it's really an upstream problem, please open another bug in this bugzilla.
Ok, thank you.
OK, below two patches are for fixing the bass speaker DAC assignment. It became more complicated than originally thought, partly because of asymmetric attributes of pins and DACs on this codec and partly because of the nature of the current parser code. BTW, the reason why the card 0 is missing is the system tries to probe the AMD ACP drivers at first. Interestingly there are two drivers matching to the very same PCI ID, and both fail -- which itself is fine, but the probe failure of the second driver happens after assigning the card slot, hence it leaves the slot empty after aborting the probe. I'm going to submit potentially fixes for this later, but you can ignore it. It's just a corner case.
Created attachment 293841 [details] Fix patch #1
Created attachment 293843 [details] Fix patch #2
Your fixes will be available in new kernel release? 5.10?
Hopefully yes, if everything goes right...
Let's close.
thank you