Hello,

I have a Supermicro server with 10 md raid6 arrays each consisting of 8 SATA drives. SATA drives are Hitachi/HGST Ultrastar 7K4000 8T.
When i try to pause array check with "echo idle > "/sys/block/<md_dev>/md/sync_action" it randomly hangs at different md device.
Process "mdX_raid6" is at 100% cpu usage. cat /sys/block/mdX/md/journal_mode hungs forever.

Here is the state at the moment of crash for one of the md devices:

root@supermicro:/sys/block/mdX/md# find -mindepth 1 -maxdepth 1 -type f|sort|grep -v journal_mode|xargs -r egrep .
./array_size:default
./array_state:write-pending
grep: ./bitmap_set_bits: Permission denied
./chunk_size:524288
./component_size:7813895168
./consistency_policy:resync
./degraded:0
./group_thread_cnt:4
./last_sync_action:check
./layout:2
./level:raid6
./max_read_errors:20
./metadata_version:1.2
./mismatch_cnt:0
grep: ./new_dev: Permission denied
./preread_bypass_threshold:1
./raid_disks:8
./reshape_direction:forwards
./reshape_position:none
./resync_start:none
./rmw_level:1
./safe_mode_delay:0.204
./skip_copy:0
./stripe_cache_active:13173
./stripe_cache_size:8192
./suspend_hi:0
./suspend_lo:0
./sync_action:check
./sync_completed:3566405120 / 15627790336
./sync_force_parallel:0
./sync_max:max
./sync_min:1821385984
./sync_speed:126
./sync_speed_max:1000 (local)
./sync_speed_min:1000 (system)

root@supermicro:~# cat /proc/mdstat 
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] 
md4 : active raid6 sdaa[2] sdab[3] sdy[0] sdae[6] sdac[4] sdad[5] sdaf[7] sdz[1]
      46883371008 blocks super 1.2 level 6, 512k chunk, algorithm 2 [8/8] [UUUUUUUU]
      [====>................]  check = 22.8% (1784112640/7813895168) finish=20571.7min speed=4884K/sec

Regards,

Georgi Nikolov