Bug 205919 - Sunix USB add-on card with ASMedia XHCI doesn't respond to USB3.0 plugging event
Summary: Sunix USB add-on card with ASMedia XHCI doesn't respond to USB3.0 plugging event
Status: RESOLVED CODE_FIX
Alias: None
Product: Drivers
Classification: Unclassified
Component: PCI (show other bugs)
Hardware: All Linux
: P1 normal
Assignee: drivers_pci@kernel-bugs.osdl.org
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2019-12-19 19:02 UTC by Kai-Heng Feng
Modified: 2020-06-02 09:34 UTC (History)
0 users

See Also:
Kernel Version: mainline
Subsystem:
Regression: No
Bisected commit-id:


Attachments

Description Kai-Heng Feng 2019-12-19 19:02:21 UTC
Plugging a USB3.0 to a runtime suspended ASMedia XHCI doesn't wake up the XHCI.

Here's the lspci after plugging USB3.0 device:
01:00.0 USB controller: ASMedia Technology Inc. Device 2142 (prog-if 30 [XHCI])
        Subsystem: SUNIX Co., Ltd. Device 312b
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at 51100000 (64-bit, non-prefetchable) [size=32K]
        Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
                Vector table: BAR=0 offset=00002000
                PBA: BAR=0 offset=00002080
        Capabilities: [78] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [80] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <2us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <2us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 8GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
                         EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap- ChkEn-
        Capabilities: [200 v1] #19
        Capabilities: [300 v1] Latency Tolerance Reporting
                Max snoop latency: 3145728ns
                Max no snoop latency: 3145728ns
        Kernel driver in use: xhci_hcd
Comment 1 Kai-Heng Feng 2020-06-02 09:34:57 UTC
commit 2880325bda8d53566dcb9725abc929eec871608e
Author: Kai-Heng Feng <kai.heng.feng@canonical.com>
Date:   Fri Dec 20 03:20:06 2019 +0800

    PCI: Avoid ASMedia XHCI USB PME# from D0 defect

Note You need to log in before you can comment on or make changes to this bug.