Distribution: Self made Hardware Environment: Sony Vaio Piturebook PCG-C1MSX Thomson SpeedTouch 330 USB ADSL modem Software Environment: speedbundle-1.0 (includes modem_run version 1.2-beta2) firmware.bin (the Macintosh firmware from somewhere in the 'Net) pppd version 2.4.2 (i.e. NOT the one distributed with speedbundle) brctl-010226.c (quite dated, is there a better version available anywhere?) libc-2.2.5 module-init-tools-0.9.10 ochi Problem Description: 1. Oopses as follows when I unplugh the ADSL modem "on the fly", i.e. without shutting down pppd or br2684ctl or modem_run. After the Oops the machine stays semi usable and it is possible to cleanly shut down most apps before more Oopses happen and block the machine, after which only Alt-SysRq works. 2. sleep between ifconfig and pppd (see reproduction) apparently is needed to prevent kernel from hanging (or becoming "unresponsive"). Alt-SysRq still works. I have not investigated this problem further since the workaround was easy. Jan 30 15:07:31 mju kernel: ohci_hcd 0000:00:14.0: urb c9d55420 path 1 ep1in 5e160000 cc 5 --> status -110 Jan 30 15:07:31 mju kernel: ohci_hcd 0000:00:14.0: urb c9d55f60 path 1 ep7in 5f160000 cc 5 --> status -110 Jan 30 15:07:31 mju kernel: ohci_hcd 0000:00:14.0: urb c9d55540 path 1 ep7in 5f160000 cc 5 --> status -110 Jan 30 15:07:31 mju modem_run[546]: Error reading interrupts Jan 30 15:07:31 mju kernel: ohci_hcd 0000:00:14.0: urb c9d55420 path 1 ep0in 5ec20000 cc 5 --> status -110 Jan 30 15:07:31 mju kernel: usbfs: USBDEVFS_CONTROL failed cmd modem_run dev 2 rqt 192 rq 18 len 1 ret -110 Jan 30 15:07:31 mju kernel: ohci_hcd 0000:00:14.0: urb c9d55420 path 1 ep1in 5e160000 cc 5 --> status -110 Jan 30 15:07:31 mju modem_run[546]: Error reading interrupts Jan 30 15:07:31 mju kernel: ohci_hcd 0000:00:14.0: urb c9d55420 path 1 ep0in 5ec20000 cc 5 --> status -110 Jan 30 15:07:31 mju kernel: usbfs: USBDEVFS_CONTROL failed cmd modem_run dev 2 rqt 192 rq 18 len 1 ret -110 Jan 30 15:07:31 mju kernel: ohci_hcd 0000:00:14.0: urb c9d55420 path 1 ep1in 5e160000 cc 5 --> status -110 Jan 30 15:07:31 mju modem_run[546]: Error reading interrupts Jan 30 15:07:32 mju modem_run[546]: Device disconnected, shutting down Jan 30 15:07:32 mju kernel: ohci_hcd 0000:00:14.0: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS Jan 30 15:07:32 mju kernel: hub 2-0:1.0: port 1, status 100, change 3, 12 Mb/s Jan 30 15:07:32 mju kernel: usb 2-1: USB disconnect, address 2 Jan 30 15:07:32 mju /etc/hotplug/usb.agent: Bad USB agent invocation (prod=, act=remove) Jan 30 15:07:32 mju kernel: usb 2-1: usb_disable_device nuking all URBs Jan 30 15:07:32 mju kernel: usb 2-1: unregistering interface 2-1:1.0 Jan 30 15:07:32 mju kernel: drivers/usb/core/usb.c: usb_hotplug Jan 30 15:07:32 mju kernel: usbfs: USBDEVFS_CONTROL failed cmd modem_run dev 2 rqt 192 rq 18 len 1 ret -19 Jan 30 15:07:32 mju kernel: usbfs: usb_submit_urb returned -19 Jan 30 15:07:32 mju kernel: usb 2-1: unregistering interface 2-1:1.1 Jan 30 15:07:32 mju kernel: usb 2-1: hcd_unlink_urb c9d55f60 fail -22 Jan 30 15:07:32 mju kernel: usb 2-1: hcd_unlink_urb c9d55540 fail -22 Jan 30 15:07:32 mju kernel: usb 2-1: hcd_unlink_urb c9d55ba0 fail -22 Jan 30 15:07:32 mju kernel: usb 2-1: hcd_unlink_urb c9d55c00 fail -22 Jan 30 15:07:32 mju kernel: drivers/usb/core/usb.c: usb_hotplug Jan 30 15:07:32 mju kernel: usb 2-1: unregistering interface 2-1:1.2 Jan 30 15:07:32 mju kernel: drivers/usb/core/usb.c: usb_hotplug Jan 30 15:07:32 mju kernel: usb 2-1: unregistering device Jan 30 15:07:32 mju kernel: drivers/usb/core/usb.c: usb_hotplug Jan 30 15:07:32 mju kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000000c Jan 30 15:07:32 mju kernel: printing eip: Jan 30 15:07:32 mju kernel: cfad34f3 Jan 30 15:07:32 mju kernel: *pde = 00000000 Jan 30 15:07:32 mju kernel: Oops: 0000 [#1] Jan 30 15:07:32 mju kernel: CPU: 0 Jan 30 15:07:32 mju kernel: EIP: 0060:[<cfad34f3>] Not tainted Jan 30 15:07:32 mju kernel: EFLAGS: 00010206 Jan 30 15:07:32 mju kernel: EIP is at releaseintf+0x41/0x66 [usbcore] Jan 30 15:07:32 mju kernel: eax: 0000000c ebx: cce08000 ecx: cce08024 edx: 00000000 Jan 30 15:07:32 mju kernel: esi: cce08024 edi: ffffffea ebp: cb1f63e0 esp: c9e0bf20 Jan 30 15:07:32 mju kernel: ds: 007b es: 007b ss: 0068 Jan 30 15:07:32 mju kernel: Process modem_run (pid: 546, threadinfo=c9e0a000 task=c9adb920) Jan 30 15:07:32 mju kernel: Stack: cb1f63e0 00000000 ceff4b60 c9b5aa40 cfad37bd cb1f63e0 00000000 c9e950a0 Jan 30 15:07:32 mju kernel: c9b78080 c0147c14 c9b78080 c9e950a0 c9e950a0 00000000 c9b5daa0 00000001 Jan 30 15:07:32 mju kernel: c0147bd8 c0146965 c9e950a0 c9b5daa0 c9e950a0 c9b5daa0 00000001 c9b5daa0 Jan 30 15:07:32 mju kernel: Call Trace: Jan 30 15:07:32 mju kernel: [<cfad37bd>] usbdev_release+0x37/0x61 [usbcore] Jan 30 15:07:33 mju kernel: [<c0147c14>] __fput+0x3b/0xdc Jan 30 15:07:33 mju kernel: [<c0147bd8>] fput+0x13/0x14 Jan 30 15:07:33 mju kernel: [<c0146965>] filp_close+0x5f/0x68 Jan 30 15:07:33 mju kernel: [<c011d7ba>] put_files_struct+0x4c/0xb2 Jan 30 15:07:33 mju kernel: [<c011e1ad>] do_exit+0x188/0x2d8 Jan 30 15:07:33 mju kernel: [<c011e322>] next_thread+0x0/0x1f Jan 30 15:07:33 mju kernel: [<c0108c8b>] syscall_call+0x7/0xb Jan 30 15:07:33 mju kernel: Jan 30 15:07:33 mju kernel: Code: 8b 04 90 50 68 c0 1c ae cf e8 9d 7d ff ff 31 ff 83 c4 08 89 Jan 30 15:07:33 mju kernel: <7>ohci_hcd 0000:00:14.0: GetStatus roothub.portstatus [1] = 0x00020100 PESC PPS Jan 30 15:07:33 mju kernel: hub 2-0:1.0: port 1 enable change, status 100 sampo@mju:~ 0$ Jan 30 15:08:02 mju pppd[614]: No response to 3 echo-requests Jan 30 15:08:02 mju pppd[614]: Serial link appears to be disconnected. Jan 30 15:08:02 mju pppd[614]: Couldn't increase MTU to 1500 Jan 30 15:08:02 mju pppd[614]: Couldn't increase MRU to 1500 Jan 30 15:08:08 mju pppd[614]: Connection terminated. Jan 30 15:08:08 mju pppd[614]: Connect time 1100.0 minutes. Jan 30 15:08:08 mju pppd[614]: Sent 3480286 bytes, received 30695248 bytes. Jan 30 15:08:09 mju /etc/hotplug/net.agent: NET remove event not supported Jan 30 15:08:48 mju pppd[614]: Timeout waiting for PADO packets Jan 30 15:08:48 mju pppd[614]: Unable to complete PPPoE Discovery Steps to reproduce: I get the modem up and running with commands modprobe usbcore modprobe ohci-hcd mount -t usbfs usbfs /proc/bus/usb modprobe speedtch # ADSL related modprobe pppoe modprobe br2684 modem_run -k -m -f firmware.bin br2684ctl -b -c 0 -a 0.35 # VPI.VCI for Telepac, Portugal ifconfig nas0 up sleep 1 # without this sleep pppd causes kernel hang pppd call speedtch cat /etc/ppp/peers/speedtch # To connect to using this configuration file, do # pppd call speedtch lcp-echo-interval 10 lcp-echo-failure 3 noipdefault defaultroute user "salainen@telepac" noauth noaccomp nopcomp noccp novj holdoff 4 persist maxfail 25 updetach usepeerdns plugin rp-pppoe.so nas0 At this point connection gets established and everything works fine. The connection is stable and drops less than once a day and I appear to be getting the advertised speed: 512 down, 128 up. If I now unplug the modem, the oops happens with about 50% probability, i.e. not every thime, but quite often. --Sampo
No feedback in form submission caused this duplicate. --Sampo *** This bug has been marked as a duplicate of 1976 ***
I can report this bug as closed since 2.6.3. --Sampo