Bug 189591 - ALSA woke us up to write new data to the device, but there was actually nothing to write!
Summary: ALSA woke us up to write new data to the device, but there was actually nothi...
Status: NEW
Alias: None
Product: Drivers
Classification: Unclassified
Component: Sound(ALSA) (show other bugs)
Hardware: ARM Linux
: P1 high
Assignee: Jaroslav Kysela
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2016-12-03 10:01 UTC by mark
Modified: 2021-02-28 02:44 UTC (History)
2 users (show)

See Also:
Kernel Version: 4.4.34-v7+
Subsystem:
Regression: No
Bisected commit-id:

Attachments
alsa-info.sh output (6.83 KB, text/plain)
2016-12-03 10:01 UTC, mark 		Details
alsa-info.sh (27.19 KB, text/plain)
2021-02-28 02:43 UTC, James Ray 		Details
Add an attachment (proposed patch, testcase, etc.)

Description mark 2016-12-03 10:01:55 UTC 
Created attachment 246761 [details]
alsa-info.sh output

I'm experimenting with a new JustBoom Digi HAT with a Raspberry Pi 3B running Raspbian 8.0 from 2016-09-23 (with kernel 4.4.34-v7+).

After a short while, the driver writing to the Dig HAT blocks and of course the user thread executing that stream stops.

In the logs I see:

    Dec  2 14:13:24 marplay-pi01 pulseaudio[766]: [alsa-sink-JustBoom Digi HiFi wm8804-spdif-0] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write!
    Dec  2 14:13:24 marplay-pi01 pulseaudio[766]: [alsa-sink-JustBoom Digi HiFi wm8804-spdif-0] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_soc_justboom_digi'. Please report this issue to the ALSA developers.
    Dec  2 14:13:24 marplay-pi01 pulseaudio[766]: [alsa-sink-JustBoom Digi HiFi wm8804-spdif-0] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail.
Comment 1 mark 2016-12-03 11:12:00 UTC 
Perhaps I should add that the (Python) code that provokes this error on the Raspberry Pi works without change on a Ubuntu 16.04 LTS distribution running a 4.4.0-51-generic kernel.
Comment 2 James Ray 2021-02-28 02:43:42 UTC 
Created attachment 295521 [details]
alsa-info.sh

Other details are here:

#!/bin/bash

SCRIPT_VERSION=0.4.65
CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog"

#################################################################################
#Copyright (C) 2007 Free Software Foundation.

#This program is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2 of the License, or
#(at your option) any later version.

#This program is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#GNU General Public License for more details.

#You should have received a copy of the GNU General Public License
#along with this program; if not, write to the Free Software
#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.

##################################################################################

# The script was written for 2 main reasons:
#  1. Remove the need for the devs/helpers to ask several questions before we can easily help the user.
#  2. Allow newer/inexperienced ALSA users to give us all the info we need to help them.

#Set the locale (this may or may not be a good idea.. let me know)
export LC_ALL=C

# Change the PATH variable, so we can run lspci (needed for some distros)
PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin
BGTITLE="ALSA-Info v $SCRIPT_VERSION"
PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc"

WGET=$(command -v wget)
REQUIRES="mktemp grep pgrep awk date uname cat sort dmesg amixer alsactl"

#
# Define some simple functions
#

update() {
	test -z "$WGET" -o ! -x "$WGET" && return

	SHFILE=$(mktemp -t alsa-info.XXXXXXXXXX) || exit 1
	wget -O $SHFILE "http://www.alsa-project.org/alsa-info.sh" >/dev/null 2>&1
	REMOTE_VERSION=$(grep SCRIPT_VERSION $SHFILE | head -n1 | sed 's/.*=//')
	if [ -s "$SHFILE" -a "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
		if [[ -n $DIALOG ]]
		then
			OVERWRITE=
			if [ -w $0 ]; then
				dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
				DIALOG_EXIT_CODE=$?
				if [[ $DIALOG_EXIT_CODE = 0 ]]; then
				  OVERWRITE=yes
				fi
			fi
			if [ -z "$OVERWRITE" ]; then
				dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0
				DIALOG_EXIT_CODE=$?
			fi
			if [[ $DIALOG_EXIT_CODE = 0 ]]
			then
				echo "Newer version detected: $REMOTE_VERSION"
				echo "To view the ChangeLog, please visit $CHANGELOG"
				if [ "$OVERWRITE" = "yes" ]; then
					cp $SHFILE $0
					echo "ALSA-Info script has been updated to v $REMOTE_VERSION"
					echo "Please re-run the script"
					rm $SHFILE 2>/dev/null
				else
					echo "ALSA-Info script has been downloaded as $SHFILE."
					echo "Please re-run the script from new location."
				fi
				exit
			else
				rm $SHFILE 2>/dev/null
			fi
		else
			echo "Newer version detected: $REMOTE_VERSION"
			echo "To view the ChangeLog, please visit $CHANGELOG"
			if [ -w $0 ]; then
				echo "The original file $0 will be overwritten!"
				echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp
				cp $SHFILE $0
				echo "ALSA-Info script has been updated. Please re-run it."
				rm $SHFILE 2>/dev/null
			else
				echo "ALSA-Info script has been downloaded $SHFILE."
				echo "Please, re-run it from new location."
			fi
			exit
		fi
	else
		rm $SHFILE 2>/dev/null
	fi
}

cleanup() {
	if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then
		rm -rf "$TEMPDIR" 2>/dev/null
	fi
	test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
}


withaplay() {
        echo "!!Aplay/Arecord output" >> $FILE
        echo "!!--------------------" >> $FILE
        echo "" >> $FILE
       	echo "APLAY" >> $FILE
	echo "" >> $FILE 
	aplay -l >> $FILE 2>&1
        echo "" >> $FILE
       	echo "ARECORD" >> $FILE
	echo "" >> $FILE
	arecord -l >> $FILE 2>&1
	echo "" >> $FILE
}

withmodules() {
	echo "!!All Loaded Modules" >> $FILE
	echo "!!------------------" >> $FILE
	echo "" >> $FILE
	awk '{print $1}' < /proc/modules | sort >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
}

withamixer() {
        echo "!!Amixer output" >> $FILE
        echo "!!-------------" >> $FILE
        echo "" >> $FILE
	for f in /proc/asound/card*/id; do
		[ -f "$f" ] && read -r CARD_NAME < "$f" || continue
		echo "!!-------Mixer controls for card $CARD_NAME" >> $FILE
		echo "" >>$FILE
		amixer -c "$CARD_NAME" info >> $FILE 2>&1
		amixer -c "$CARD_NAME" >> $FILE 2>&1
		echo "" >> $FILE
	done
	echo "" >> $FILE
}

withalsactl() {
	echo "!!Alsactl output" >> $FILE
        echo "!!--------------" >> $FILE
        echo "" >> $FILE
	alsactl -f $TEMPDIR/alsactl.tmp store
	echo "--startcollapse--" >> $FILE
	cat $TEMPDIR/alsactl.tmp >> $FILE
	echo "--endcollapse--" >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
}

withdevices() {
        echo "!!ALSA Device nodes" >> $FILE
        echo "!!-----------------" >> $FILE
        echo "" >> $FILE
        ls -la /dev/snd/* >> $FILE
        echo "" >> $FILE
        echo "" >> $FILE
}

withconfigs() {
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e $HOME/.asoundrc.asoundconf ]]; then
        echo "!!ALSA configuration files" >> $FILE
        echo "!!------------------------" >> $FILE
        echo "" >> $FILE

        #Check for ~/.asoundrc
        if [[ -e $HOME/.asoundrc ]]
        then
                echo "!!User specific config file (~/.asoundrc)" >> $FILE
                echo "" >> $FILE
                cat $HOME/.asoundrc >> $FILE
                echo "" >> $FILE
                echo "" >> $FILE
        fi
	#Check for .asoundrc.asoundconf (seems to be Ubuntu specific)
	if [[ -e $HOME/.asoundrc.asoundconf ]]
	then
		echo "!!asoundconf-generated config file" >> $FILE
		echo "" >> $FILE
		cat $HOME/.asoundrc.asoundconf >> $FILE
		echo "" >> $FILE
		echo "" >> $FILE
	fi
        #Check for /etc/asound.conf
        if [[ -e /etc/asound.conf ]]
        then
                echo "!!System wide config file (/etc/asound.conf)" >> $FILE
                echo "" >> $FILE
                cat /etc/asound.conf >> $FILE
                echo "" >> $FILE
                echo "" >> $FILE
        fi
fi
}

withsysfs() {
    local i f
    local printed=""
    for i in /sys/class/sound/*; do
	case "$i" in
	    */hwC?D?)
		if [ -f $i/init_pin_configs ]; then
		    if [ -z "$printed" ]; then
			echo "!!Sysfs Files" >> $FILE
			echo "!!-----------" >> $FILE
			echo "" >> $FILE
		    fi
		    for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs hints; do
			echo "$i/$f:" >> $FILE
			cat $i/$f >> $FILE
			echo >> $FILE
		    done
		    printed=yes
		fi
		;;
	    esac
    done
    if [ -n "$printed" ]; then
	echo "" >> $FILE
    fi
}

withdmesg() {
	echo "!!ALSA/HDA dmesg" >> $FILE
	echo "!!--------------" >> $FILE
	echo "" >> $FILE
	dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel' >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
}

withpackages() {
	local RPM
	local DPKG
	RPM="$(command -v rpmquery)"
	DPKG="$(command -v dpkg)"
	[ -n "$RPM$DPKG" ] || return
	local PATTERN='(alsa-(lib|oss|plugins|tools|(topology|ucm)-conf|utils|sof-firmware)|libalsa|tinycompress|sof-firmware)'
	{
        echo "!!Packages installed"
        echo "!!--------------------"
        echo ""
	{
		if [ -x "$RPM" ]; then "$RPM" -a; fi
		if [ -x "$DPKG" ]; then "$DPKG" -l; fi
	} | grep -E "$PATTERN"
	echo ""
	} >> "$FILE"
}

withall() {
	withdevices
	withconfigs
	withaplay
	withamixer
	withalsactl
	withmodules
	withsysfs
	withdmesg
	withpackages
	WITHALL="no"
}

get_alsa_library_version() {
	ALSA_LIB_VERSION=$(grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null | awk '{ print $3 }' | sed 's/"//g')

	if [ -z "$ALSA_LIB_VERSION" ]; then
		if [ -f /etc/lsb-release ]; then
			. /etc/lsb-release
			case "$DISTRIB_ID" in
				Ubuntu)
					if command -v dpkg > /dev/null ; then
						ALSA_LIB_VERSION=$(dpkg -l libasound2 | tail -1 | awk '{ print $3 }' | cut -f 1 -d -)
					fi

					if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
						ALSA_LIB_VERSION=""
					fi
					return
					;;
				*)
					return
					;;
			esac
		elif [ -f /etc/debian_version ]; then
			if command -v dpkg > /dev/null ; then
				ALSA_LIB_VERSION=$(dpkg -l libasound2 | tail -1 | awk '{ print $3 }' | cut -f 1 -d -)
			fi

			if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
				ALSA_LIB_VERSION=""
			fi
			return
		fi
	fi
}

# Basic requires
for prg in $REQUIRES; do
  t=$(command -v $prg)
  if test -z "$t"; then
    echo "This script requires $prg utility to continue."
    exit 1
  fi
done

# Run checks to make sure the programs we need are installed.
LSPCI="$(command -v lspci)"
TPUT="$(command -v tput)"
DIALOG="$(command -v dialog)"

# Check to see if sysfs is enabled in the kernel. We'll need this later on
SYSFS=$(mount | grep sysfs | awk '{ print $3 }');

# Check modprobe config files for sound related options
SNDOPTIONS=$(modprobe -c | sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p')

KEEP_OUTPUT=
NFILE=""

PASTEBIN=""
WWWSERVICE="www.alsa-project.org"
WELCOME="yes"
PROCEED="yes"
UPLOAD="ask"
REPEAT=""
while [ -z "$REPEAT" ]; do
REPEAT="no"
case "$1" in
	--update|--help|--about)
		WELCOME="no"
		PROCEED="no"
		;;
	--upload)
		UPLOAD="yes"
		WELCOME="no"
		;;
	--no-upload)
		UPLOAD="no"
		WELCOME="no"
		;;
	--pastebin)
		PASTEBIN="yes"
		WWWSERVICE="pastebin"
		;;
	--no-dialog)
		DIALOG=""
		REPEAT=""
		shift
		;;
	--stdout)
		DIALOG=""
		WELCOME="no"
		;;
esac
done


#Script header output.
if [ "$WELCOME" = "yes" ]; then
greeting_message="\

This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.

  dmesg
  lspci
  aplay
  amixer
  alsactl
  rpm, dpkg
  /proc/asound/
  /sys/class/sound/
  ~/.asoundrc (etc.)

See '$0 --help' for command line options.
"
if [ -n "$DIALOG" ]; then
	dialog  --backtitle "$BGTITLE" \
		--title "ALSA-Info script v $SCRIPT_VERSION" \
		--msgbox "$greeting_message" 20 80
else
	echo "ALSA Information Script v $SCRIPT_VERSION"
	echo "--------------------------------"
	echo "$greeting_message"
fi # dialog
fi # WELCOME

# Set the output file
TEMPDIR=$(mktemp -t -d alsa-info.XXXXXXXXXX) || exit 1
FILE="$TEMPDIR/alsa-info.txt"
if [ -z "$NFILE" ]; then
	NFILE=$(mktemp -t alsa-info.txt.XXXXXXXXXX) || exit 1
fi

trap cleanup 0

if [ "$PROCEED" = "yes" ]; then

if [ -z "$LSPCI" ]; then
	if [ -d /sys/bus/pci ]; then
		echo "This script requires lspci. Please install it, and re-run this script."
	fi
fi

# Fetch the info and store in temp files/variables
TSTAMP=$(LANG=C TZ=UTC date)
DISTRO=$(grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus\|ALT" /etc/{issue,*release,*version})
KERNEL_VERSION=$(uname -r)
KERNEL_PROCESSOR=$(uname -p)
KERNEL_MACHINE=$(uname -m)
KERNEL_OS=$(uname -o)
[[ $(uname -v | grep SMP) ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No"
ALSA_DRIVER_VERSION=$(cat /proc/asound/version | head -n1 | awk '{ print $7 }' | sed 's/\.$//')
get_alsa_library_version
ALSA_UTILS_VERSION=$(amixer -v | awk '{ print $3 }')

ESDINST=$(command -v esd)
PAINST=$(command -v pulseaudio)
ARTSINST=$(command -v artsd)
JACKINST=$(command -v jackd)
ROARINST=$(command -v roard)
DMIDECODE=$(command -v dmidecode)

#Check for DMI data
if [ -d /sys/class/dmi/id ]; then
    # No root privileges are required when using sysfs method
    DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)
    DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null)
    DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null)
    DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null)
    DMI_SYSTEM_SKU=$(cat /sys/class/dmi/id/product_sku 2>/dev/null)
    DMI_BOARD_VENDOR=$(cat /sys/class/dmi/id/board_vendor 2>/dev/null)
    DMI_BOARD_NAME=$(cat /sys/class/dmi/id/board_name 2>/dev/null)
elif [ -x $DMIDECODE ]; then
    DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null)
    DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null)
    DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null)
    DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null)
    DMI_SYSTEM_SKU=$($DMIDECODE -s system-sku-number 2>/dev/null)
    DMI_BOARD_VENDOR=$($DMIDECODE -s baseboard-manufacturer 2>/dev/null)
    DMI_BOARD_NAME=$($DMIDECODE -s baseboard-product-name 2>/dev/null)
fi

# Check for ACPI device status
if [ -d /sys/bus/acpi/devices ]; then
    for f in /sys/bus/acpi/devices/*/status; do
	ACPI_STATUS=$(cat $f 2>/dev/null);
	if [[ "$ACPI_STATUS" -ne 0 ]]; then
	    echo $f $'\t' $ACPI_STATUS >>$TEMPDIR/acpidevicestatus.tmp;
	fi
    done
fi

cat /proc/asound/modules 2>/dev/null | awk '{ print $2 }' > $TEMPDIR/alsamodules.tmp
cat /proc/asound/cards > $TEMPDIR/alsacards.tmp
if [[ ! -z "$LSPCI" ]]; then
	for class in 0401 0402 0403; do
		lspci -vvnn -d "::$class" | sed -n '/^[^\t]/,+1p'
	done > $TEMPDIR/lspci.tmp
fi

#Check for HDA-Intel cards codec#*
cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null

#Check for AC97 cards codec
cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2> /dev/null
cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs > $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null

#Check for USB mixer setup
cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null

#Fetch the info, and put it in $FILE in a nice readable format.
if [[ -z $PASTEBIN ]]; then
echo "upload=true&script=true&cardinfo=" > $FILE
else
echo "name=$USER&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=" > $FILE
fi
echo "!!################################" >> $FILE
echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
echo "!!################################" >> $FILE
echo "" >> $FILE
echo "!!Script ran on: $TSTAMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Linux Distribution" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo $DISTRO >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!DMI Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
echo "Manufacturer:      $DMI_SYSTEM_MANUFACTURER" >> $FILE
echo "Product Name:      $DMI_SYSTEM_PRODUCT_NAME" >> $FILE
echo "Product Version:   $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE
echo "Firmware Version:  $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE
echo "System SKU:        $DMI_SYSTEM_SKU" >> $FILE
echo "Board Vendor:      $DMI_BOARD_VENDOR" >> $FILE
echo "Board Name:        $DMI_BOARD_NAME" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ACPI Device Status Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/acpidevicestatus.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Kernel Information" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo "Kernel release:    $KERNEL_VERSION" >> $FILE
echo "Operating System:  $KERNEL_OS" >> $FILE
echo "Architecture:      $KERNEL_MACHINE" >> $FILE
echo "Processor:         $KERNEL_PROCESSOR" >> $FILE
echo "SMP Enabled:       $KERNEL_SMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ALSA Version" >> $FILE
echo "!!------------" >> $FILE
echo "" >> $FILE
echo "Driver version:     $ALSA_DRIVER_VERSION" >> $FILE
echo "Library version:    $ALSA_LIB_VERSION" >> $FILE
echo "Utilities version:  $ALSA_UTILS_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Loaded ALSA modules" >> $FILE
echo "!!-------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsamodules.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Sound Servers on this system" >> $FILE
echo "!!----------------------------" >> $FILE
echo "" >> $FILE
if [[ -n $PAINST ]];then
[[ $(pgrep '^(.*/)?pulseaudio$') ]] && PARUNNING="Yes" || PARUNNING="No"
echo "Pulseaudio:" >> $FILE
echo "      Installed - Yes ($PAINST)" >> $FILE
echo "      Running - $PARUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ESDINST ]];then
[[ $(pgrep '^(.*/)?esd$') ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
echo "ESound Daemon:" >> $FILE
echo "      Installed - Yes ($ESDINST)" >> $FILE
echo "      Running - $ESDRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ARTSINST ]];then
[[ $(pgrep '^(.*/)?artsd$') ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
echo "aRts:" >> $FILE
echo "      Installed - Yes ($ARTSINST)" >> $FILE
echo "      Running - $ARTSRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $JACKINST ]];then
[[ $(pgrep '^(.*/)?jackd$') ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
echo "Jack:" >> $FILE
echo "      Installed - Yes ($JACKINST)" >> $FILE
echo "      Running - $JACKRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ROARINST ]];then
[[ $(pgrep '^(.*/)?roard$') ]] && ROARRUNNING="Yes" || ROARRUNNING="No"
echo "RoarAudio:" >> $FILE
echo "      Installed - Yes ($ROARINST)" >> $FILE
echo "      Running - $ROARRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" && -z "$ROARINST" ]];then
echo "No sound servers found." >> $FILE
echo "" >> $FILE
fi
echo "" >> $FILE
echo "!!Soundcards recognised by ALSA" >> $FILE
echo "!!-----------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsacards.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE

if [[ ! -z "$LSPCI" ]]; then
echo "!!PCI Soundcards installed in the system" >> $FILE
echo "!!--------------------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/lspci.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

if [ "$SNDOPTIONS" ]
then
echo "!!Modprobe options (Sound related)" >> $FILE
echo "!!--------------------------------" >> $FILE
echo "" >> $FILE
modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi

if [ -d "$SYSFS" ]; then
	echo "!!Loaded sound module options" >> $FILE
	echo "!!---------------------------" >> $FILE
	echo "" >> $FILE
	for mod in $(cat /proc/asound/modules | awk '{ print $2 }'); do
		echo "!!Module: $mod" >> $FILE
		for params in $(echo $SYSFS/module/$mod/parameters/*); do
			echo -ne "\t"
			value=$(cat $params)
			echo "$params : $value" | sed 's:.*/::'
		done >> $FILE
		echo "" >> $FILE
	done
	echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then
	echo "!!HDA-Intel Codec information" >> $FILE
	echo "!!---------------------------" >> $FILE
	echo "--startcollapse--" >> $FILE
	echo "" >> $FILE
	cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE
	echo "--endcollapse--" >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then
        echo "!!AC97 Codec information" >> $FILE
        echo "!!----------------------" >> $FILE
        echo "--startcollapse--" >> $FILE
        echo "" >> $FILE
        cat $TEMPDIR/alsa-ac97.tmp >> $FILE
        echo "" >> $FILE
        cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE
        echo "--endcollapse--" >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
fi

if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then
        echo "!!USB Mixer information" >> $FILE
        echo "!!---------------------" >> $FILE
        echo "--startcollapse--" >> $FILE
        echo "" >> $FILE
        cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE
        echo "--endcollapse--" >> $FILE
	echo "" >> $FILE
	echo "" >> $FILE
fi

#If no command line options are specified, then run as though --with-all was specified
if [ -z "$1" ]; then
	update
fi

fi # proceed

#loop through command line arguments, until none are left.
if [ -n "$1" ]; then
	until [ -z "$1" ]
	do
	case "$1" in
		--pastebin)
		        update
			;;
		--update)
			update
			exit
			;;
		--upload)
			UPLOAD="yes"
			;;
		--no-upload)
			UPLOAD="no"
			;;
		--output)
			shift
			NFILE="$1"
			KEEP_OUTPUT="yes"
			;;
		--debug)
			echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
			KEEP_FILES="yes"
			echo ""
			;;
		--with-all)
			withall
			;;
		--with-aplay)
			withaplay
			WITHALL="no"
			;;
		--with-amixer)
			withamixer
			WITHALL="no"
			;;
		--with-alsactl)
			withalsactl
			WITHALL="no"
			;;
		--with-devices)
			withdevices
			WITHALL="no"
			;;
		--with-dmesg)
			withdmesg
			WITHALL="no"
			;;
		--with-configs)
			withconfigs
			WITHALL="no"
			;;
		--with-packages)
			withpackages
			WITHALL="no"
			;;
		--stdout)
			UPLOAD="no"
			if [ -z "$WITHALL" ]; then
				withall
			fi
			cat $FILE
			rm $FILE
			exit
			;;
		--about)
			echo "Written/Tested by the following users of #alsa on irc.freenode.net:"
			echo ""
			echo "	wishie - Script author and developer / Testing"
			echo "	crimsun - Various script ideas / Testing"
			echo "	gnubien - Various script ideas / Testing"
			echo "	GrueMaster - HDA Intel specific items / Testing"
			echo "	olegfink - Script update function"
			echo "  TheMuso - display to stdout functionality"
			exit 0
			;;
		*)
			echo "alsa-info.sh version $SCRIPT_VERSION"
			echo ""
			echo "Available options:"
			echo "	--with-aplay (includes the output of aplay -l)"
			echo "	--with-amixer (includes the output of amixer)"
			echo "	--with-alsactl (includes the output of alsactl)"
			echo "	--with-configs (includes the output of ~/.asoundrc and"
			echo "	    /etc/asound.conf if they exist)" 
			echo "	--with-devices (shows the device nodes in /dev/snd/)"
			echo "	--with-dmesg (shows the ALSA/HDA kernel messages)"
			echo "	--with-packages (includes known packages installed)"
			echo ""
			echo "	--output FILE (specify the file to output for no-upload mode)"
			echo "	--update (check server for script updates)"
			echo "	--upload (upload contents to remote server)"
			echo "	--no-upload (do not upload contents to remote server)"
			echo "	--pastebin (use http://pastebin.ca) as remote server"
			echo "	    instead www.alsa-project.org"
			echo "	--stdout (print alsa information to standard output"
			echo "	    instead of a file)"
			echo "	--about (show some information about the script)"
			echo "	--debug (will run the script as normal, but will not"
			echo "	     delete $FILE)"
			exit 0
			;;
	esac
	shift 1
	done
fi

if [ "$PROCEED" = "no" ]; then
	exit 1
fi

if [ -z "$WITHALL" ]; then
	withall
fi

# Check if wget is installed, and supports --post-file.
if ! wget --help 2>/dev/null | grep -q post-file; then
	# We couldn't find a suitable wget. If --upload was passed, tell the user to upload manually.
	if [ "$UPLOAD" != "yes" ]; then
		:
	elif [ -n "$DIALOG" ]; then
		if [ -z "$PASTEBIN" ]; then
			dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.alsa-project.org.\nPossible reasons are:\n\n    1. Couldn't find 'wget' in your PATH\n    2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.alsa-project.org/cardinfo-db/ and submit your post." 25 100
		else
			dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.pastebin.ca.\nPossible reasons are:\n\n    1. Couldn't find 'wget' in your PATH\n    2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post." 25 100
		fi
	else
		if [ -z "$PASTEBIN" ]; then
			echo ""
			echo "Could not automatically upload output to http://www.alsa-project.org"
			echo "Possible reasons are:"
			echo "    1. Couldn't find 'wget' in your PATH"
			echo "    2. Your version of wget is less than 1.8.2"
			echo ""
			echo "Please manually upload $NFILE to http://www.alsa-project.org/cardinfo-db/ and submit your post."
			echo ""
		else
			echo ""
			echo "Could not automatically upload output to http://www.pastebin.ca"
			echo "Possible reasons are:"
			echo "    1. Couldn't find 'wget' in your PATH"
			echo "    2. Your version of wget is less than 1.8.2"
			echo ""
			echo "Please manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post."
			echo ""
		fi
	fi
	UPLOAD="no"
fi

if [ "$UPLOAD" = "ask" ]; then
	if [ -n "$DIALOG" ]; then
		dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
		DIALOG_EXIT_CODE=$?
		if [ $DIALOG_EXIT_CODE != 0 ]; then
			UPLOAD="no"
		else
			UPLOAD="yes"
		fi
	else
		echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
		read -e CONFIRM
		if [ "$CONFIRM" != "y" ]; then
			UPLOAD="no"
		else
			UPLOAD="yes"
		fi
	fi

fi

if [ "$UPLOAD" = "no" ]; then

	mv -f $FILE $NFILE || exit 1
	KEEP_OUTPUT="yes"

	if [[ -n $DIALOG ]]
	then
		dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
	else
		echo ""
		echo "Your ALSA information is in $NFILE"
		echo ""
	fi

	exit

fi # UPLOAD

if [[ -n $DIALOG ]]
then
	dialog --backtitle "$BGTITLE" --infobox "Uploading information to $WWWSERVICE ..." 6 70
else
	echo -n "Uploading information to $WWWSERVICE ..."
fi

if [[ -z $PASTEBIN ]]; then
	wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://www.alsa-project.org/cardinfo-db/" &>$TEMPDIR/wget.tmp
else
	wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY&encrypt=t&encryptpw=blahblah" &>$TEMPDIR/wget.tmp
fi

if [ $? -ne 0 ]; then
	mv -f $FILE $NFILE || exit 1
	KEEP_OUTPUT="yes"

	if [ -n "$DIALOG" ]; then
		dialog --backtitle "$BGTITLE" --title "Information not uploaded" --msgbox "An error occurred while contacting $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
	else
		echo ""
		echo "An error occurred while contacting $WWWSERVICE."
		echo "Your information was NOT automatically uploaded."
		echo ""
		echo "Your ALSA information is in $NFILE"
		echo ""
	fi

	exit
fi

if [ -n "$DIALOG" ]; then

dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100 
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE = 0 ]; then
	grep -v "alsa-info.txt" $FILE > $TEMPDIR/uploaded.txt
	dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/uploaded.txt 0 0
fi

clear

# no dialog
else

echo -e " Done!"
echo ""

fi # dialog

if [ -z "$PASTEBIN" ]; then
	FINAL_URL=$(grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2)
else
	FINAL_URL=$(grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p')
fi

# See if tput is available, and use it if it is.
if [ -x "$TPUT" ]; then
	FINAL_URL=$(tput setaf 1; printf '%s' "$FINAL_URL"; tput sgr0)
fi

# Output the URL of the uploaded file.	
echo "Your ALSA information is located at $FINAL_URL"
echo "Please inform the person helping you."
echo ""
Comment 3 James Ray 2021-02-28 02:44:49 UTC 
(In reply to James Ray from comment #2)

Oops, I meant to post a link, rather than the whole alsa-info.sh file:

https://forum.manjaro.org/t/built-in-speakers-in-monitor-not-recognised-and-not-working-after-updates/29823/15

> Created attachment 295521 [details]
> alsa-info.sh
> 
> Other details are here:
> 
> #!/bin/bash
> 
> SCRIPT_VERSION=0.4.65
> CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog"
> 
> #############################################################################
> ####
> #Copyright (C) 2007 Free Software Foundation.
> 
> #This program is free software; you can redistribute it and/or modify
> #it under the terms of the GNU General Public License as published by
> #the Free Software Foundation; either version 2 of the License, or
> #(at your option) any later version.
> 
> #This program is distributed in the hope that it will be useful,
> #but WITHOUT ANY WARRANTY; without even the implied warranty of
> #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> #GNU General Public License for more details.
> 
> #You should have received a copy of the GNU General Public License
> #along with this program; if not, write to the Free Software
> #Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
> USA.
> 
> #############################################################################
> #####
> 
> # The script was written for 2 main reasons:
> #  1. Remove the need for the devs/helpers to ask several questions before
> we can easily help the user.
> #  2. Allow newer/inexperienced ALSA users to give us all the info we need
> to help them.
> 
> #Set the locale (this may or may not be a good idea.. let me know)
> export LC_ALL=C
> 
> # Change the PATH variable, so we can run lspci (needed for some distros)
> PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin
> BGTITLE="ALSA-Info v $SCRIPT_VERSION"
> PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc"
> 
> WGET=$(command -v wget)
> REQUIRES="mktemp grep pgrep awk date uname cat sort dmesg amixer alsactl"
> 
> #
> # Define some simple functions
> #
> 
> update() {
>       test -z "$WGET" -o ! -x "$WGET" && return
> 
>       SHFILE=$(mktemp -t alsa-info.XXXXXXXXXX) || exit 1
>       wget -O $SHFILE "http://www.alsa-project.org/alsa-info.sh" >/dev/null
> 2>&1
>       REMOTE_VERSION=$(grep SCRIPT_VERSION $SHFILE | head -n1 | sed
> 's/.*=//')
>       if [ -s "$SHFILE" -a "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
>               if [[ -n $DIALOG ]]
>               then
>                       OVERWRITE=
>                       if [ -w $0 ]; then
>                               dialog --yesno "Newer version of ALSA-Info has
> been found\n\nDo you wish
> to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
>                               DIALOG_EXIT_CODE=$?
>                               if [[ $DIALOG_EXIT_CODE = 0 ]]; then
>                                 OVERWRITE=yes
>                               fi
>                       fi
>                       if [ -z "$OVERWRITE" ]; then
>                               dialog --yesno "Newer version of ALSA-Info has
> been found\n\nDo you wish
> to download it?" 0 0
>                               DIALOG_EXIT_CODE=$?
>                       fi
>                       if [[ $DIALOG_EXIT_CODE = 0 ]]
>                       then
>                               echo "Newer version detected: $REMOTE_VERSION"
>                               echo "To view the ChangeLog, please visit
> $CHANGELOG"
>                               if [ "$OVERWRITE" = "yes" ]; then
>                                       cp $SHFILE $0
>                                       echo "ALSA-Info script has been updated
> to v $REMOTE_VERSION"
>                                       echo "Please re-run the script"
>                                       rm $SHFILE 2>/dev/null
>                               else
>                                       echo "ALSA-Info script has been
> downloaded as $SHFILE."
>                                       echo "Please re-run the script from new
> location."
>                               fi
>                               exit
>                       else
>                               rm $SHFILE 2>/dev/null
>                       fi
>               else
>                       echo "Newer version detected: $REMOTE_VERSION"
>                       echo "To view the ChangeLog, please visit $CHANGELOG"
>                       if [ -w $0 ]; then
>                               echo "The original file $0 will be
> overwritten!"
>                               echo -n "If you do not like to proceed, press
> Ctrl-C now.." ; read inp
>                               cp $SHFILE $0
>                               echo "ALSA-Info script has been updated. Please
> re-run it."
>                               rm $SHFILE 2>/dev/null
>                       else
>                               echo "ALSA-Info script has been downloaded
> $SHFILE."
>                               echo "Please, re-run it from new location."
>                       fi
>                       exit
>               fi
>       else
>               rm $SHFILE 2>/dev/null
>       fi
> }
> 
> cleanup() {
>       if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then
>               rm -rf "$TEMPDIR" 2>/dev/null
>       fi
>       test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
> }
> 
> 
> withaplay() {
>         echo "!!Aplay/Arecord output" >> $FILE
>         echo "!!--------------------" >> $FILE
>         echo "" >> $FILE
>               echo "APLAY" >> $FILE
>       echo "" >> $FILE 
>       aplay -l >> $FILE 2>&1
>         echo "" >> $FILE
>               echo "ARECORD" >> $FILE
>       echo "" >> $FILE
>       arecord -l >> $FILE 2>&1
>       echo "" >> $FILE
> }
> 
> withmodules() {
>       echo "!!All Loaded Modules" >> $FILE
>       echo "!!------------------" >> $FILE
>       echo "" >> $FILE
>       awk '{print $1}' < /proc/modules | sort >> $FILE
>       echo "" >> $FILE
>       echo "" >> $FILE
> }
> 
> withamixer() {
>         echo "!!Amixer output" >> $FILE
>         echo "!!-------------" >> $FILE
>         echo "" >> $FILE
>       for f in /proc/asound/card*/id; do
>               [ -f "$f" ] && read -r CARD_NAME < "$f" || continue
>               echo "!!-------Mixer controls for card $CARD_NAME" >> $FILE
>               echo "" >>$FILE
>               amixer -c "$CARD_NAME" info >> $FILE 2>&1
>               amixer -c "$CARD_NAME" >> $FILE 2>&1
>               echo "" >> $FILE
>       done
>       echo "" >> $FILE
> }
> 
> withalsactl() {
>       echo "!!Alsactl output" >> $FILE
>         echo "!!--------------" >> $FILE
>         echo "" >> $FILE
>       alsactl -f $TEMPDIR/alsactl.tmp store
>       echo "--startcollapse--" >> $FILE
>       cat $TEMPDIR/alsactl.tmp >> $FILE
>       echo "--endcollapse--" >> $FILE
>       echo "" >> $FILE
>       echo "" >> $FILE
> }
> 
> withdevices() {
>         echo "!!ALSA Device nodes" >> $FILE
>         echo "!!-----------------" >> $FILE
>         echo "" >> $FILE
>         ls -la /dev/snd/* >> $FILE
>         echo "" >> $FILE
>         echo "" >> $FILE
> }
> 
> withconfigs() {
> if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e
> $HOME/.asoundrc.asoundconf ]]; then
>         echo "!!ALSA configuration files" >> $FILE
>         echo "!!------------------------" >> $FILE
>         echo "" >> $FILE
> 
>         #Check for ~/.asoundrc
>         if [[ -e $HOME/.asoundrc ]]
>         then
>                 echo "!!User specific config file (~/.asoundrc)" >> $FILE
>                 echo "" >> $FILE
>                 cat $HOME/.asoundrc >> $FILE
>                 echo "" >> $FILE
>                 echo "" >> $FILE
>         fi
>       #Check for .asoundrc.asoundconf (seems to be Ubuntu specific)
>       if [[ -e $HOME/.asoundrc.asoundconf ]]
>       then
>               echo "!!asoundconf-generated config file" >> $FILE
>               echo "" >> $FILE
>               cat $HOME/.asoundrc.asoundconf >> $FILE
>               echo "" >> $FILE
>               echo "" >> $FILE
>       fi
>         #Check for /etc/asound.conf
>         if [[ -e /etc/asound.conf ]]
>         then
>                 echo "!!System wide config file (/etc/asound.conf)" >> $FILE
>                 echo "" >> $FILE
>                 cat /etc/asound.conf >> $FILE
>                 echo "" >> $FILE
>                 echo "" >> $FILE
>         fi
> fi
> }
> 
> withsysfs() {
>     local i f
>     local printed=""
>     for i in /sys/class/sound/*; do
>       case "$i" in
>           */hwC?D?)
>               if [ -f $i/init_pin_configs ]; then
>                   if [ -z "$printed" ]; then
>                       echo "!!Sysfs Files" >> $FILE
>                       echo "!!-----------" >> $FILE
>                       echo "" >> $FILE
>                   fi
>                   for f in init_pin_configs driver_pin_configs
> user_pin_configs
> init_verbs hints; do
>                       echo "$i/$f:" >> $FILE
>                       cat $i/$f >> $FILE
>                       echo >> $FILE
>                   done
>                   printed=yes
>               fi
>               ;;
>           esac
>     done
>     if [ -n "$printed" ]; then
>       echo "" >> $FILE
>     fi
> }
> 
> withdmesg() {
>       echo "!!ALSA/HDA dmesg" >> $FILE
>       echo "!!--------------" >> $FILE
>       echo "" >> $FILE
>       dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel'
> >>
> $FILE
>       echo "" >> $FILE
>       echo "" >> $FILE
> }
> 
> withpackages() {
>       local RPM
>       local DPKG
>       RPM="$(command -v rpmquery)"
>       DPKG="$(command -v dpkg)"
>       [ -n "$RPM$DPKG" ] || return
>       local
> PATTERN='(alsa-(lib|oss|plugins|tools|(topology|ucm)-conf|utils|sof-
> firmware)|libalsa|tinycompress|sof-firmware)'
>       {
>         echo "!!Packages installed"
>         echo "!!--------------------"
>         echo ""
>       {
>               if [ -x "$RPM" ]; then "$RPM" -a; fi
>               if [ -x "$DPKG" ]; then "$DPKG" -l; fi
>       } | grep -E "$PATTERN"
>       echo ""
>       } >> "$FILE"
> }
> 
> withall() {
>       withdevices
>       withconfigs
>       withaplay
>       withamixer
>       withalsactl
>       withmodules
>       withsysfs
>       withdmesg
>       withpackages
>       WITHALL="no"
> }
> 
> get_alsa_library_version() {
>       ALSA_LIB_VERSION=$(grep VERSION_STR /usr/include/alsa/version.h
> 2>/dev/null
> | awk '{ print $3 }' | sed 's/"//g')
> 
>       if [ -z "$ALSA_LIB_VERSION" ]; then
>               if [ -f /etc/lsb-release ]; then
>                       . /etc/lsb-release
>                       case "$DISTRIB_ID" in
>                               Ubuntu)
>                                       if command -v dpkg > /dev/null ; then
>                                               ALSA_LIB_VERSION=$(dpkg -l
> libasound2 | tail -1 | awk '{ print $3 }' |
> cut -f 1 -d -)
>                                       fi
> 
>                                       if [ "$ALSA_LIB_VERSION" = "<none>" ];
> then
>                                               ALSA_LIB_VERSION=""
>                                       fi
>                                       return
>                                       ;;
>                               *)
>                                       return
>                                       ;;
>                       esac
>               elif [ -f /etc/debian_version ]; then
>                       if command -v dpkg > /dev/null ; then
>                               ALSA_LIB_VERSION=$(dpkg -l libasound2 | tail -1
> | awk '{ print $3 }' |
> cut -f 1 -d -)
>                       fi
> 
>                       if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
>                               ALSA_LIB_VERSION=""
>                       fi
>                       return
>               fi
>       fi
> }
> 
> # Basic requires
> for prg in $REQUIRES; do
>   t=$(command -v $prg)
>   if test -z "$t"; then
>     echo "This script requires $prg utility to continue."
>     exit 1
>   fi
> done
> 
> # Run checks to make sure the programs we need are installed.
> LSPCI="$(command -v lspci)"
> TPUT="$(command -v tput)"
> DIALOG="$(command -v dialog)"
> 
> # Check to see if sysfs is enabled in the kernel. We'll need this later on
> SYSFS=$(mount | grep sysfs | awk '{ print $3 }');
> 
> # Check modprobe config files for sound related options
> SNDOPTIONS=$(modprobe -c | sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p')
> 
> KEEP_OUTPUT=
> NFILE=""
> 
> PASTEBIN=""
> WWWSERVICE="www.alsa-project.org"
> WELCOME="yes"
> PROCEED="yes"
> UPLOAD="ask"
> REPEAT=""
> while [ -z "$REPEAT" ]; do
> REPEAT="no"
> case "$1" in
>       --update|--help|--about)
>               WELCOME="no"
>               PROCEED="no"
>               ;;
>       --upload)
>               UPLOAD="yes"
>               WELCOME="no"
>               ;;
>       --no-upload)
>               UPLOAD="no"
>               WELCOME="no"
>               ;;
>       --pastebin)
>               PASTEBIN="yes"
>               WWWSERVICE="pastebin"
>               ;;
>       --no-dialog)
>               DIALOG=""
>               REPEAT=""
>               shift
>               ;;
>       --stdout)
>               DIALOG=""
>               WELCOME="no"
>               ;;
> esac
> done
> 
> 
> #Script header output.
> if [ "$WELCOME" = "yes" ]; then
> greeting_message="\
> 
> This script visits the following commands/files to collect diagnostic
> information about your ALSA installation and sound related hardware.
> 
>   dmesg
>   lspci
>   aplay
>   amixer
>   alsactl
>   rpm, dpkg
>   /proc/asound/
>   /sys/class/sound/
>   ~/.asoundrc (etc.)
> 
> See '$0 --help' for command line options.
> "
> if [ -n "$DIALOG" ]; then
>       dialog  --backtitle "$BGTITLE" \
>               --title "ALSA-Info script v $SCRIPT_VERSION" \
>               --msgbox "$greeting_message" 20 80
> else
>       echo "ALSA Information Script v $SCRIPT_VERSION"
>       echo "--------------------------------"
>       echo "$greeting_message"
> fi # dialog
> fi # WELCOME
> 
> # Set the output file
> TEMPDIR=$(mktemp -t -d alsa-info.XXXXXXXXXX) || exit 1
> FILE="$TEMPDIR/alsa-info.txt"
> if [ -z "$NFILE" ]; then
>       NFILE=$(mktemp -t alsa-info.txt.XXXXXXXXXX) || exit 1
> fi
> 
> trap cleanup 0
> 
> if [ "$PROCEED" = "yes" ]; then
> 
> if [ -z "$LSPCI" ]; then
>       if [ -d /sys/bus/pci ]; then
>               echo "This script requires lspci. Please install it, and re-run
> this
> script."
>       fi
> fi
> 
> # Fetch the info and store in temp files/variables
> TSTAMP=$(LANG=C TZ=UTC date)
> DISTRO=$(grep -ihs
> "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slac
> kware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Ve
> ctor\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexe
> nta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackT
> rack\|KateOS\|Pardus\|ALT" /etc/{issue,*release,*version})
> KERNEL_VERSION=$(uname -r)
> KERNEL_PROCESSOR=$(uname -p)
> KERNEL_MACHINE=$(uname -m)
> KERNEL_OS=$(uname -o)
> [[ $(uname -v | grep SMP) ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No"
> ALSA_DRIVER_VERSION=$(cat /proc/asound/version | head -n1 | awk '{ print $7
> }' | sed 's/\.$//')
> get_alsa_library_version
> ALSA_UTILS_VERSION=$(amixer -v | awk '{ print $3 }')
> 
> ESDINST=$(command -v esd)
> PAINST=$(command -v pulseaudio)
> ARTSINST=$(command -v artsd)
> JACKINST=$(command -v jackd)
> ROARINST=$(command -v roard)
> DMIDECODE=$(command -v dmidecode)
> 
> #Check for DMI data
> if [ -d /sys/class/dmi/id ]; then
>     # No root privileges are required when using sysfs method
>     DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)
>     DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null)
>     DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version
> 2>/dev/null)
>     DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version
> 2>/dev/null)
>     DMI_SYSTEM_SKU=$(cat /sys/class/dmi/id/product_sku 2>/dev/null)
>     DMI_BOARD_VENDOR=$(cat /sys/class/dmi/id/board_vendor 2>/dev/null)
>     DMI_BOARD_NAME=$(cat /sys/class/dmi/id/board_name 2>/dev/null)
> elif [ -x $DMIDECODE ]; then
>     DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null)
>     DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null)
>     DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null)
>     DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null)
>     DMI_SYSTEM_SKU=$($DMIDECODE -s system-sku-number 2>/dev/null)
>     DMI_BOARD_VENDOR=$($DMIDECODE -s baseboard-manufacturer 2>/dev/null)
>     DMI_BOARD_NAME=$($DMIDECODE -s baseboard-product-name 2>/dev/null)
> fi
> 
> # Check for ACPI device status
> if [ -d /sys/bus/acpi/devices ]; then
>     for f in /sys/bus/acpi/devices/*/status; do
>       ACPI_STATUS=$(cat $f 2>/dev/null);
>       if [[ "$ACPI_STATUS" -ne 0 ]]; then
>           echo $f $'\t' $ACPI_STATUS >>$TEMPDIR/acpidevicestatus.tmp;
>       fi
>     done
> fi
> 
> cat /proc/asound/modules 2>/dev/null | awk '{ print $2 }' >
> $TEMPDIR/alsamodules.tmp
> cat /proc/asound/cards > $TEMPDIR/alsacards.tmp
> if [[ ! -z "$LSPCI" ]]; then
>       for class in 0401 0402 0403; do
>               lspci -vvnn -d "::$class" | sed -n '/^[^\t]/,+1p'
>       done > $TEMPDIR/lspci.tmp
> fi
> 
> #Check for HDA-Intel cards codec#*
> cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null
> 
> #Check for AC97 cards codec
> cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2>
> /dev/null
> cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs >
> $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null
> 
> #Check for USB mixer setup
> cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null
> 
> #Fetch the info, and put it in $FILE in a nice readable format.
> if [[ -z $PASTEBIN ]]; then
> echo "upload=true&script=true&cardinfo=" > $FILE
> else
> echo
> "name=$USER&type=33&description=/tmp/alsa-info.
> txt&expiry=&s=Submit+Post&content=" > $FILE
> fi
> echo "!!################################" >> $FILE
> echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
> echo "!!################################" >> $FILE
> echo "" >> $FILE
> echo "!!Script ran on: $TSTAMP" >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> echo "!!Linux Distribution" >> $FILE
> echo "!!------------------" >> $FILE
> echo "" >> $FILE
> echo $DISTRO >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> echo "!!DMI Information" >> $FILE
> echo "!!---------------" >> $FILE
> echo "" >> $FILE
> echo "Manufacturer:      $DMI_SYSTEM_MANUFACTURER" >> $FILE
> echo "Product Name:      $DMI_SYSTEM_PRODUCT_NAME" >> $FILE
> echo "Product Version:   $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE
> echo "Firmware Version:  $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE
> echo "System SKU:        $DMI_SYSTEM_SKU" >> $FILE
> echo "Board Vendor:      $DMI_BOARD_VENDOR" >> $FILE
> echo "Board Name:        $DMI_BOARD_NAME" >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> echo "!!ACPI Device Status Information" >> $FILE
> echo "!!---------------" >> $FILE
> echo "" >> $FILE
> cat $TEMPDIR/acpidevicestatus.tmp >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> echo "!!Kernel Information" >> $FILE
> echo "!!------------------" >> $FILE
> echo "" >> $FILE
> echo "Kernel release:    $KERNEL_VERSION" >> $FILE
> echo "Operating System:  $KERNEL_OS" >> $FILE
> echo "Architecture:      $KERNEL_MACHINE" >> $FILE
> echo "Processor:         $KERNEL_PROCESSOR" >> $FILE
> echo "SMP Enabled:       $KERNEL_SMP" >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> echo "!!ALSA Version" >> $FILE
> echo "!!------------" >> $FILE
> echo "" >> $FILE
> echo "Driver version:     $ALSA_DRIVER_VERSION" >> $FILE
> echo "Library version:    $ALSA_LIB_VERSION" >> $FILE
> echo "Utilities version:  $ALSA_UTILS_VERSION" >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> echo "!!Loaded ALSA modules" >> $FILE
> echo "!!-------------------" >> $FILE
> echo "" >> $FILE
> cat $TEMPDIR/alsamodules.tmp >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> echo "!!Sound Servers on this system" >> $FILE
> echo "!!----------------------------" >> $FILE
> echo "" >> $FILE
> if [[ -n $PAINST ]];then
> [[ $(pgrep '^(.*/)?pulseaudio$') ]] && PARUNNING="Yes" || PARUNNING="No"
> echo "Pulseaudio:" >> $FILE
> echo "      Installed - Yes ($PAINST)" >> $FILE
> echo "      Running - $PARUNNING" >> $FILE
> echo "" >> $FILE
> fi
> if [[ -n $ESDINST ]];then
> [[ $(pgrep '^(.*/)?esd$') ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
> echo "ESound Daemon:" >> $FILE
> echo "      Installed - Yes ($ESDINST)" >> $FILE
> echo "      Running - $ESDRUNNING" >> $FILE
> echo "" >> $FILE
> fi
> if [[ -n $ARTSINST ]];then
> [[ $(pgrep '^(.*/)?artsd$') ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
> echo "aRts:" >> $FILE
> echo "      Installed - Yes ($ARTSINST)" >> $FILE
> echo "      Running - $ARTSRUNNING" >> $FILE
> echo "" >> $FILE
> fi
> if [[ -n $JACKINST ]];then
> [[ $(pgrep '^(.*/)?jackd$') ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
> echo "Jack:" >> $FILE
> echo "      Installed - Yes ($JACKINST)" >> $FILE
> echo "      Running - $JACKRUNNING" >> $FILE
> echo "" >> $FILE
> fi
> if [[ -n $ROARINST ]];then
> [[ $(pgrep '^(.*/)?roard$') ]] && ROARRUNNING="Yes" || ROARRUNNING="No"
> echo "RoarAudio:" >> $FILE
> echo "      Installed - Yes ($ROARINST)" >> $FILE
> echo "      Running - $ROARRUNNING" >> $FILE
> echo "" >> $FILE
> fi
> if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" &&
> -z "$ROARINST" ]];then
> echo "No sound servers found." >> $FILE
> echo "" >> $FILE
> fi
> echo "" >> $FILE
> echo "!!Soundcards recognised by ALSA" >> $FILE
> echo "!!-----------------------------" >> $FILE
> echo "" >> $FILE
> cat $TEMPDIR/alsacards.tmp >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> 
> if [[ ! -z "$LSPCI" ]]; then
> echo "!!PCI Soundcards installed in the system" >> $FILE
> echo "!!--------------------------------------" >> $FILE
> echo "" >> $FILE
> cat $TEMPDIR/lspci.tmp >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> fi
> 
> if [ "$SNDOPTIONS" ]
> then
> echo "!!Modprobe options (Sound related)" >> $FILE
> echo "!!--------------------------------" >> $FILE
> echo "" >> $FILE
> modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
> echo "" >> $FILE
> echo "" >> $FILE
> fi
> 
> if [ -d "$SYSFS" ]; then
>       echo "!!Loaded sound module options" >> $FILE
>       echo "!!---------------------------" >> $FILE
>       echo "" >> $FILE
>       for mod in $(cat /proc/asound/modules | awk '{ print $2 }'); do
>               echo "!!Module: $mod" >> $FILE
>               for params in $(echo $SYSFS/module/$mod/parameters/*); do
>                       echo -ne "\t"
>                       value=$(cat $params)
>                       echo "$params : $value" | sed 's:.*/::'
>               done >> $FILE
>               echo "" >> $FILE
>       done
>       echo "" >> $FILE
> fi
> 
> if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then
>       echo "!!HDA-Intel Codec information" >> $FILE
>       echo "!!---------------------------" >> $FILE
>       echo "--startcollapse--" >> $FILE
>       echo "" >> $FILE
>       cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE
>       echo "--endcollapse--" >> $FILE
>       echo "" >> $FILE
>       echo "" >> $FILE
> fi
> 
> if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then
>         echo "!!AC97 Codec information" >> $FILE
>         echo "!!----------------------" >> $FILE
>         echo "--startcollapse--" >> $FILE
>         echo "" >> $FILE
>         cat $TEMPDIR/alsa-ac97.tmp >> $FILE
>         echo "" >> $FILE
>         cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE
>         echo "--endcollapse--" >> $FILE
>       echo "" >> $FILE
>       echo "" >> $FILE
> fi
> 
> if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then
>         echo "!!USB Mixer information" >> $FILE
>         echo "!!---------------------" >> $FILE
>         echo "--startcollapse--" >> $FILE
>         echo "" >> $FILE
>         cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE
>         echo "--endcollapse--" >> $FILE
>       echo "" >> $FILE
>       echo "" >> $FILE
> fi
> 
> #If no command line options are specified, then run as though --with-all was
> specified
> if [ -z "$1" ]; then
>       update
> fi
> 
> fi # proceed
> 
> #loop through command line arguments, until none are left.
> if [ -n "$1" ]; then
>       until [ -z "$1" ]
>       do
>       case "$1" in
>               --pastebin)
>                       update
>                       ;;
>               --update)
>                       update
>                       exit
>                       ;;
>               --upload)
>                       UPLOAD="yes"
>                       ;;
>               --no-upload)
>                       UPLOAD="no"
>                       ;;
>               --output)
>                       shift
>                       NFILE="$1"
>                       KEEP_OUTPUT="yes"
>                       ;;
>               --debug)
>                       echo "Debugging enabled. $FILE and $TEMPDIR will not be
> deleted"
>                       KEEP_FILES="yes"
>                       echo ""
>                       ;;
>               --with-all)
>                       withall
>                       ;;
>               --with-aplay)
>                       withaplay
>                       WITHALL="no"
>                       ;;
>               --with-amixer)
>                       withamixer
>                       WITHALL="no"
>                       ;;
>               --with-alsactl)
>                       withalsactl
>                       WITHALL="no"
>                       ;;
>               --with-devices)
>                       withdevices
>                       WITHALL="no"
>                       ;;
>               --with-dmesg)
>                       withdmesg
>                       WITHALL="no"
>                       ;;
>               --with-configs)
>                       withconfigs
>                       WITHALL="no"
>                       ;;
>               --with-packages)
>                       withpackages
>                       WITHALL="no"
>                       ;;
>               --stdout)
>                       UPLOAD="no"
>                       if [ -z "$WITHALL" ]; then
>                               withall
>                       fi
>                       cat $FILE
>                       rm $FILE
>                       exit
>                       ;;
>               --about)
>                       echo "Written/Tested by the following users of #alsa on
> irc.freenode.net:"
>                       echo ""
>                       echo "  wishie - Script author and developer / Testing"
>                       echo "  crimsun - Various script ideas / Testing"
>                       echo "  gnubien - Various script ideas / Testing"
>                       echo "  GrueMaster - HDA Intel specific items /
> Testing"
>                       echo "  olegfink - Script update function"
>                       echo "  TheMuso - display to stdout functionality"
>                       exit 0
>                       ;;
>               *)
>                       echo "alsa-info.sh version $SCRIPT_VERSION"
>                       echo ""
>                       echo "Available options:"
>                       echo "  --with-aplay (includes the output of aplay -l)"
>                       echo "  --with-amixer (includes the output of amixer)"
>                       echo "  --with-alsactl (includes the output of
> alsactl)"
>                       echo "  --with-configs (includes the output of
> ~/.asoundrc and"
>                       echo "      /etc/asound.conf if they exist)" 
>                       echo "  --with-devices (shows the device nodes in
> /dev/snd/)"
>                       echo "  --with-dmesg (shows the ALSA/HDA kernel
> messages)"
>                       echo "  --with-packages (includes known packages
> installed)"
>                       echo ""
>                       echo "  --output FILE (specify the file to output for
> no-upload mode)"
>                       echo "  --update (check server for script updates)"
>                       echo "  --upload (upload contents to remote server)"
>                       echo "  --no-upload (do not upload contents to remote
> server)"
>                       echo "  --pastebin (use http://pastebin.ca) as remote
> server"
>                       echo "      instead www.alsa-project.org"
>                       echo "  --stdout (print alsa information to standard
> output"
>                       echo "      instead of a file)"
>                       echo "  --about (show some information about the
> script)"
>                       echo "  --debug (will run the script as normal, but
> will not"
>                       echo "       delete $FILE)"
>                       exit 0
>                       ;;
>       esac
>       shift 1
>       done
> fi
> 
> if [ "$PROCEED" = "no" ]; then
>       exit 1
> fi
> 
> if [ -z "$WITHALL" ]; then
>       withall
> fi
> 
> # Check if wget is installed, and supports --post-file.
> if ! wget --help 2>/dev/null | grep -q post-file; then
>       # We couldn't find a suitable wget. If --upload was passed, tell the
> user
> to upload manually.
>       if [ "$UPLOAD" != "yes" ]; then
>               :
>       elif [ -n "$DIALOG" ]; then
>               if [ -z "$PASTEBIN" ]; then
>                       dialog --backtitle "$BGTITLE" --msgbox "Could not
> automatically upload
> output to http://www.alsa-project.org.\nPossible reasons are:\n\n    1.
> Couldn't find 'wget' in your PATH\n    2. Your version of wget is less than
> 1.8.2\n\nPlease manually upload $NFILE to
> http://www.alsa-project.org/cardinfo-db/ and submit your post." 25 100
>               else
>                       dialog --backtitle "$BGTITLE" --msgbox "Could not
> automatically upload
> output to http://www.pastebin.ca.\nPossible reasons are:\n\n    1. Couldn't
> find 'wget' in your PATH\n    2. Your version of wget is less than
> 1.8.2\n\nPlease manually upload $NFILE to http://www.pastebin.ca/upload.php
> and submit your post." 25 100
>               fi
>       else
>               if [ -z "$PASTEBIN" ]; then
>                       echo ""
>                       echo "Could not automatically upload output to
> http://www.alsa-project.org"
>                       echo "Possible reasons are:"
>                       echo "    1. Couldn't find 'wget' in your PATH"
>                       echo "    2. Your version of wget is less than 1.8.2"
>                       echo ""
>                       echo "Please manually upload $NFILE to
> http://www.alsa-project.org/cardinfo-db/ and submit your post."
>                       echo ""
>               else
>                       echo ""
>                       echo "Could not automatically upload output to
> http://www.pastebin.ca"
>                       echo "Possible reasons are:"
>                       echo "    1. Couldn't find 'wget' in your PATH"
>                       echo "    2. Your version of wget is less than 1.8.2"
>                       echo ""
>                       echo "Please manually upload $NFILE to
> http://www.pastebin.ca/upload.php
> and submit your post."
>                       echo ""
>               fi
>       fi
>       UPLOAD="no"
> fi
> 
> if [ "$UPLOAD" = "ask" ]; then
>       if [ -n "$DIALOG" ]; then
>               dialog --backtitle "$BGTITLE" --title "Information collected"
> --yes-label
> " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno
> "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
>               DIALOG_EXIT_CODE=$?
>               if [ $DIALOG_EXIT_CODE != 0 ]; then
>                       UPLOAD="no"
>               else
>                       UPLOAD="yes"
>               fi
>       else
>               echo -n "Automatically upload ALSA information to $WWWSERVICE?
> [y/N] : "
>               read -e CONFIRM
>               if [ "$CONFIRM" != "y" ]; then
>                       UPLOAD="no"
>               else
>                       UPLOAD="yes"
>               fi
>       fi
> 
> fi
> 
> if [ "$UPLOAD" = "no" ]; then
> 
>       mv -f $FILE $NFILE || exit 1
>       KEEP_OUTPUT="yes"
> 
>       if [[ -n $DIALOG ]]
>       then
>               dialog --backtitle "$BGTITLE" --title "Information collected"
> --msgbox
> "\n\nYour ALSA information is in $NFILE" 10 60
>       else
>               echo ""
>               echo "Your ALSA information is in $NFILE"
>               echo ""
>       fi
> 
>       exit
> 
> fi # UPLOAD
> 
> if [[ -n $DIALOG ]]
> then
>       dialog --backtitle "$BGTITLE" --infobox "Uploading information to
> $WWWSERVICE ..." 6 70
> else
>       echo -n "Uploading information to $WWWSERVICE ..."
> fi
> 
> if [[ -z $PASTEBIN ]]; then
>       wget -O - --tries=5 --timeout=60 --post-file=$FILE
> "http://www.alsa-project.org/cardinfo-db/" &>$TEMPDIR/wget.tmp
> else
>       wget -O - --tries=5 --timeout=60 --post-file=$FILE
> "http://pastebin.ca/quiet-paste.
> php?api=$PASTEBINKEY&encrypt=t&encryptpw=blahblah" &>$TEMPDIR/wget.tmp
> fi
> 
> if [ $? -ne 0 ]; then
>       mv -f $FILE $NFILE || exit 1
>       KEEP_OUTPUT="yes"
> 
>       if [ -n "$DIALOG" ]; then
>               dialog --backtitle "$BGTITLE" --title "Information not
> uploaded" --msgbox
> "An error occurred while contacting $WWWSERVICE.\n Your information was NOT
> automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
>       else
>               echo ""
>               echo "An error occurred while contacting $WWWSERVICE."
>               echo "Your information was NOT automatically uploaded."
>               echo ""
>               echo "Your ALSA information is in $NFILE"
>               echo ""
>       fi
> 
>       exit
> fi
> 
> if [ -n "$DIALOG" ]; then
> 
> dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would
> you like to see the uploaded information?" 5 100 
> DIALOG_EXIT_CODE=$?
> if [ $DIALOG_EXIT_CODE = 0 ]; then
>       grep -v "alsa-info.txt" $FILE > $TEMPDIR/uploaded.txt
>       dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/uploaded.txt 0 0
> fi
> 
> clear
> 
> # no dialog
> else
> 
> echo -e " Done!"
> echo ""
> 
> fi # dialog
> 
> if [ -z "$PASTEBIN" ]; then
>       FINAL_URL=$(grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2)
> else
>       FINAL_URL=$(grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n
> 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p')
> fi
> 
> # See if tput is available, and use it if it is.
> if [ -x "$TPUT" ]; then
>       FINAL_URL=$(tput setaf 1; printf '%s' "$FINAL_URL"; tput sgr0)
> fi
> 
> # Output the URL of the uploaded file.        
> echo "Your ALSA information is located at $FINAL_URL"
> echo "Please inform the person helping you."
> echo ""
Note You need to log in before you can comment on or make changes to this bug.