1. /var/log/dmesg reports: pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000ce9ff] 2. System - Slackware 13.1 x86 3. cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 124 model name : AMD Athlon(tm) Processor TF-20 stepping : 2 cpu MHz : 800.000 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow up extd_apicid pni cx16 lahf_lm svm extapic cr8_legacy 3dnowprefetch lbrv bogomips : 1595.72 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps 4. /proc/version Linux version 2.6.35-smp (root@slackware) (gcc version 4.4.4 (GCC) ) #1 SMP PREEMPT Mon Aug 2 17:54:11 HST 2010 5. cat /proc/modules ipv6 222220 10 - Live 0xf91a1000 snd_seq_dummy 1119 0 - Live 0xf914d000 snd_seq_oss 25706 0 - Live 0xf913b000 snd_seq_midi_event 4664 1 snd_seq_oss, Live 0xf9128000 snd_seq 42999 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live 0xf9110000 snd_seq_device 4523 3 snd_seq_dummy,snd_seq_oss,snd_seq, Live 0xf90f7000 snd_pcm_oss 31885 0 - Live 0xf90e4000 snd_mixer_oss 13457 1 snd_pcm_oss, Live 0xf90ce000 cpufreq_ondemand 7378 1 - Live 0xf90be000 powernow_k8 11922 0 - Live 0xf90b0000 freq_table 2039 2 cpufreq_ondemand,powernow_k8, Live 0xf9097000 mperf 923 1 powernow_k8, Live 0xf908d000 fuse 55342 3 - Live 0xf9076000 snd_hda_codec_realtek 189992 1 - Live 0xf8f7e000 snd_hda_intel 17692 0 - Live 0xf8f20000 ecb 1629 2 - Live 0xf8efd000 ath9k 70339 0 - Live 0xf8edf000 snd_hda_codec 58524 2 snd_hda_codec_realtek,snd_hda_intel, Live 0xf8eae000 ath9k_common 4298 1 ath9k, Live 0xf8e59000 ath9k_hw 272581 2 ath9k,ath9k_common, Live 0xf8e06000 usbhid 24402 0 - Live 0xf8d96000 hid 61343 1 usbhid, Live 0xf8d74000 ath 6768 2 ath9k,ath9k_hw, Live 0xf8d25000 snd_hwdep 5200 1 snd_hda_codec, Live 0xf8d19000 mac80211 147139 2 ath9k,ath9k_common, Live 0xf8ce4000 rtc_cmos 8062 0 - Live 0xf8caa000 snd_pcm 53102 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec, Live 0xf8c8e000 thermal 10430 0 - Live 0xf8c6f000 rtc_core 12446 1 rtc_cmos, Live 0xf8c5d000 snd_timer 15939 2 snd_seq,snd_pcm, Live 0xf8c4b000 cfg80211 123101 4 ath9k,ath9k_common,ath,mac80211, Live 0xf874b000 ohci_hcd 19937 0 - Live 0xf8bd9000 processor 25390 1 powernow_k8, Live 0xf8bc1000 rtc_lib 1566 1 rtc_core, Live 0xf83e6000 ehci_hcd 32509 0 - Live 0xf8120000 battery 8372 0 - Live 0xf83b0000 ac 2467 0 - Live 0xf83a7000 led_class 1915 1 ath9k, Live 0xf80d5000 atl1c 28319 0 - Live 0xf8378000 thermal_sys 12032 2 thermal,processor, Live 0xf833c000 button 4010 0 - Live 0xf8110000 snd 43178 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer, Live 0xf80ef000 sg 21185 0 - Live 0xf80c5000 sr_mod 12375 0 - Live 0xf809c000 k8temp 2703 0 - Live 0xf808f000 evdev 7099 10 - Live 0xf8084000 serio_raw 3766 0 - Live 0xf8078000 hwmon 1129 2 thermal_sys,k8temp, Live 0xf806d000 cdrom 31256 1 sr_mod, Live 0xf805b000 soundcore 5181 1 snd, Live 0xf8047000 snd_page_alloc 6053 2 snd_hda_intel,snd_pcm, Live 0xf8021000 6. /proc/ioports 0000-0cf7 : PCI Bus 0000:00 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0071 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 03c0-03df : vga+ 0400-04cf : pnp 00:08 0400-0403 : ACPI PM1a_EVT_BLK 0404-0405 : ACPI PM1a_CNT_BLK 0408-040b : ACPI PM_TMR 0410-0415 : ACPI CPU throttle 0420-0427 : ACPI GPE0_BLK 04d0-04d1 : pnp 00:08 04d6-04d6 : pnp 00:08 0680-06ff : pnp 00:08 077a-077a : pnp 00:08 0900-0900 : ACPI PM2_CNT_BLK 0c00-0c01 : pnp 00:08 0c14-0c14 : pnp 00:08 0c50-0c52 : pnp 00:08 0c6c-0c6c : pnp 00:08 0c6f-0c6f : pnp 00:08 0cd0-0cdb : pnp 00:08 0cf8-0cff : PCI conf1 0d00-ffff : PCI Bus 0000:00 1000-1fff : PCI Bus 0000:09 2000-2fff : PCI Bus 0000:08 2000-207f : 0000:08:00.0 2000-207f : atl1c 3000-6fff : PCI Bus 0000:02 7000-7fff : PCI Bus 0000:01 7000-70ff : 0000:01:05.0 8010-801f : 0000:00:11.0 8010-801f : ahci 8030-8037 : 0000:00:11.0 8030-8037 : ahci 8038-803f : 0000:00:11.0 8038-803f : ahci 8048-804b : 0000:00:11.0 8048-804b : ahci 804c-804f : 0000:00:11.0 804c-804f : ahci fd60-fd63 : pnp 00:08 7. /proc/iomem 00000000-00000fff : reserved 00001000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : PCI Bus 0000:00 000a0000-000bffff : Video RAM area 000c0000-000ce9ff : Video ROM 000c0000-000c3fff : PCI Bus 0000:00 000c4000-000c7fff : PCI Bus 0000:00 000c8000-000cbfff : PCI Bus 0000:00 000cf000-000cffff : Adapter ROM 000d0000-000d3fff : PCI Bus 0000:00 000d4000-000d7fff : PCI Bus 0000:00 000d8000-000dbfff : PCI Bus 0000:00 000dc000-000dffff : PCI Bus 0000:00 000e0000-000fffff : reserved 000e0000-000e3fff : PCI Bus 0000:00 000e4000-000e7fff : PCI Bus 0000:00 000e8000-000ebfff : PCI Bus 0000:00 000ec000-000effff : PCI Bus 0000:00 000f0000-000fffff : System ROM 00100000-de60bfff : System RAM 01000000-013c1664 : Kernel code 013c1665-015416c7 : Kernel data 015b1000-01605a23 : Kernel bss de60c000-de80bfff : ACPI Non-volatile Storage de80c000-dfd6ffff : System RAM dfd70000-dfdbefff : reserved dfdbf000-dfe91fff : System RAM dfe92000-dfebefff : ACPI Non-volatile Storage dfebf000-dfee1fff : System RAM dfee2000-dfef6fff : ACPI Tables dfef7000-dfefffff : System RAM dff00000-dfffffff : RAM buffer e0000000-f6ffffff : PCI Bus 0000:00 e0000000-efffffff : PCI Bus 0000:01 e0000000-efffffff : 0000:01:05.0 f0000000-f0ffffff : PCI Bus 0000:02 f1000000-f10fffff : PCI Bus 0000:08 f1000000-f103ffff : 0000:08:00.0 f1000000-f103ffff : atl1c f1100000-f20fffff : PCI Bus 0000:02 f1100000-f110ffff : 0000:02:00.0 f1100000-f110ffff : ath9k f2100000-f22fffff : PCI Bus 0000:01 f2100000-f21fffff : 0000:01:05.0 f2200000-f220ffff : 0000:01:05.0 f2300000-f2303fff : 0000:00:14.2 f2300000-f2303fff : ICH HD audio f2304000-f2304fff : 0000:00:12.1 f2304000-f2304fff : ohci_hcd f2305000-f2305fff : 0000:00:12.0 f2305000-f2305fff : ohci_hcd f2306000-f23063ff : 0000:00:11.0 f2306000-f23063ff : ahci f2306400-f23064ff : 0000:00:12.2 f2306400-f23064ff : ehci_hcd f7000000-f7ffffff : PCI MMCONFIG 0000 [bus 00-0f] f7000000-f7ffffff : reserved f7000000-f7ffffff : pnp 00:01 f8000000-ffffffff : PCI Bus 0000:00 feb00000-feb00fff : reserved fec00000-fec00fff : reserved fec00000-fec003ff : IOAPIC 0 fed00000-fed003ff : HPET 0 fee00000-fee00fff : Local APIC fee00000-fee00fff : reserved fee00000-fee00fff : pnp 00:01 fff00000-ffffffff : reserved fff00000-ffffffff : pnp 00:09 8. lspci -vvv 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=1 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: f2100000-f22fffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=07, sec-latency=0 I/O behind bridge: 00003000-00006fff Memory behind bridge: f1100000-f20fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f0ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot # 4, PowerLimit 25.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device 028d Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information <?> Capabilities: [110] Virtual Channel <?> 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f1000000-f10fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot # 5, PowerLimit 25.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device 028d Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information <?> Capabilities: [110] Virtual Channel <?> 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0]) Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 8038 [size=8] Region 1: I/O ports at 804c [size=4] Region 2: I/O ports at 8030 [size=8] Region 3: I/O ports at 8048 [size=4] Region 4: I/O ports at 8010 [size=16] Region 5: Memory at f2306000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] SATA HBA <?> Kernel driver in use: ahci 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f2305000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f2304000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f2306400 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx- Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at f2300000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=09, subordinate=09, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8 IsocEn- LSEn+ ExtCTL- 64b+ Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 1.02 Link Frequency: 800MHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 7000 [size=256] Region 2: Memory at f2200000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at f2100000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Foxconn International, Inc. Device e016 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f1100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12 Capabilities: [170] Power Budgeting <?> Kernel driver in use: ath9k Kernel modules: ath9k 08:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0) Subsystem: Acer Incorporated [ALI] Device 028d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f1000000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [6c] Vital Product Data Not readable Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [180] Device Serial Number ff-2b-d5-2d-00-26-22-ff Kernel driver in use: atl1c Kernel modules: atl1c 9. /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: TOSHIBA MK1655GS Rev: FG01 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: Optiarc Model: DVD RW AD-7585H Rev: KX04 Type: CD-ROM ANSI SCSI revision: 05
We don't appear to have a category for PCI. I cc'ed Jesse. Might be an acpi issue though.
Ok great, so any word back on this from Jesse? I hope we can get this fixed soon. THANKS
Same bug. Tested with versions: 2.6.35, 2.6.37-rc2 1. pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff] ... pci_root PNP0A08:00: address space collision: host bridge window [mem ...] conflicts with video ROM [mem ...] Then nothing is displayed and num lock blinks (kernel panic?) 2. Ubuntu 10.04, Gentoo
Created attachment 37462 [details] cat /proc/cpuinfo
Created attachment 37472 [details] cat /proc/version
Created attachment 37482 [details] cat /proc/modules
Created attachment 37492 [details] cat /proc/ioports
Created attachment 37502 [details] cat /proc/iomem
Created attachment 37512 [details] lspci -vvv
Created attachment 37522 [details] cat /proc/scsi/scsi
Above is for 2.6.32-25 on Ubuntu 10.10 because 2.6.35 doesn`t work. Also I tried to git bisect this bug on linux-staging-next-2.6 tree some time ago, but fail because same versions was marked good and bad. I think that this bug can be enabled/disabled in .config
Created attachment 37552 [details] git bisect log (linux-staging-next-2.6) Notice good/bad commit 494a43bb188c10b9b21375bbfe2691e41e3cb145 This is because different .config used.
I'm still getting this bug with 2.6.36.1 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000ce9ff]
I forgot to mention if I use lilo like this I don't see the message; append="pci=nocrs vt.default_utf8=0" By my understanding is I shouldn't need to use pci=nocrs? THANKS
I apologize for missing this bug report. I happened to trip over it while researching bug #38522. Das: Are you seeing a functional problem in addition to the host bridge window conflict warning? The message itself isn't something that should cause any problems, and I plan to reduce it from KERN_WARN to KERN_INFO, so you won't see it any more. If there's something that doesn't work, in addition to the message, please attach a complete dmesg log from a recent kernel, 3.0 if possible (with "pci=nocrs" if necessary), and details about what is broken. If you have to use "pci=nocrs" to boot, that is a bug that I want to fix. Nao: It sounds like you see the message and, in addition, you have a hang. If the hang still occurs when you boot with "pci=nocrs", it's likely unrelated. Can you collect any more information about the hang, e.g., by booting with "ignore_loglevel" and using a serial console or taking a photo of the screen?
I don't see any problems other then the log message, that made me wonder and I do use pci=nocrs... THANKS
Actually let me back up here, I do see one problem, if I go from kernel 2.6.36.4 to anything higher, like .37, .38, or .39 with the Radeon KMS I'm using in the kernel, when the Radeon KMS kicks in the first few lines of messages appear in the middle of my screen then after that they appear as they should going down the far left side of the screen. I'll paste below my kernel config maybe someone can tell me why this configuration works fine in 36.4 but doesn't in newer kernels? Here's my kernel config for 2.6.36.4 http://pastebin.com/Cxhadb0K THANKS
You should stop using "pci=nocrs" if you can. It won't cause you any problems, but it can cover up bugs that I'd like to fix. The Radeon KMS problem is completely unrelated, and it would be great if you could open a separate bug report for that. Maybe even attach a couple photos to make the problem concrete.
Ok I'll remove the pci=nocrs, what would you like to see regarding this in dmesg I presume? THANKS
Here's the patch I intend to use to fix the alarming error message: https://bugzilla.kernel.org/show_bug.cgi?id=38522#c7 That should be enough to resolve this bug. I'm going to treat this bug report as merely "message should be KERN_INFO, not KERN_ERR". If you discover an issue when you remove "pci=nocrs", e.g., you machine stops booting or something, we should open a new bug report for that. And if Nao can still reproduce the hang, we should open a new bug report for that, too. *** This bug has been marked as a duplicate of bug 38522 ***
Das, I don't need a dmesg log or anything unless you see a problem when you remove "pci=nocrs". If you do see a problem, just open a new defect (or email the dmesg log to me), so we don't clutter this bug report.
Well I'd feel better if you looked at the dmesg to make sure, better safe then sorry. :) http://pastebin.com/D88h1DES THANKS
I think you're safe :) I don't see any devices that are having problems. The only thing I see is what looks like a minor BIOS bug: 215: bus: [00, 0f] on node 0 link 0 220: PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000) 236: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) At 215, amd_bus.c reads chipset config and finds a host bridge leading to PCI buses 00-0f. At 220, the ACPI MCFG table tells us the MMCONFIG area for buses 00-0f. But at 236, the ACPI PNP0A08 device tells us the host bridge leads to buses 00-ff. This probably should be 00-0f, to match the ranges at 215 and 220. But this isn't a problem for you because the highest device you have is 08:00.0, so you don't need to use any buses above 0f.
Ok great thanks... Also if you know anyone that deals with this bug; https://bugzilla.kernel.org/show_bug.cgi?id=38592 I'd appreciate you letting them and someone getting on this. I submitted this at the beginning of the year and I lost it and submitted this over, I've waited now almost 6 months on this with no word... THANKS
TYPO; I meant I'd appreciate you letting them know... THANKS
Hello, Let's please not marked this as resolved, the patch in the other bug report does not work and this is now in the 3.0 kernel as well, which I was hoping was going to be fixed in 3.0 and it was not... :( This is the output below from 3.0; pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000ce9ff] THANKS
A patch referencing this bug report has been merged in Linux v3.1-rc1: commit 43d786ed4df4c54cb8802a523748a7d78130a2cb Author: Bjorn Helgaas <bhelgaas@google.com> Date: Sat Jul 2 10:47:12 2011 -0600 x86/PCI: reduce severity of host bridge window conflict warnings