Bug 15548 - BUG: key f70f4b50 not in .data
BUG: key f70f4b50 not in .data
Status: CLOSED CODE_FIX
Product: ACPI
Classification: Unclassified
Component: Power-Thermal
All Linux
: P1 normal
Assigned To: acpi_power-thermal
:
: 15584 (view as bug list)
Depends on:
Blocks: 15310
  Show dependency treegraph
 
Reported: 2010-03-16 19:54 UTC by Maciej Rutecki
Modified: 2010-04-07 20:16 UTC (History)
6 users (show)

See Also:
Kernel Version: 2.6.34-rc1
Tree: Mainline
Regression: Yes


Attachments

Description Maciej Rutecki 2010-03-16 19:54:51 UTC
Subject    : BUG: key f70f4b50 not in .data
Submitter  : Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Date       : 2010-03-09 10:27
Message-ID : 20100309102754.GA3316@swordfish.minsk.epam.com
References : http://marc.info/?l=linux-kernel&m=126813046113130&w=2

This entry is being used for tracking a regression from 2.6.33.  Please don't
close it until the problem is fixed in the mainline.
Comment 1 Zhang Rui 2010-03-18 07:14:51 UTC
please attach the full dmesg output after boot.
so the problem doesn't exist if
boot with boot option "thermal.off=1" if the thermal driver is built in,
or
thermal driver is blacklisted if it's built as a module.
right?
Comment 2 Sergey Senozhatsky 2010-03-18 12:23:32 UTC
On (03/18/10 07:15), bugzilla-daemon@bugzilla.kernel.org wrote:
> 
> --- Comment #1 from Zhang Rui <rui.zhang@intel.com>  2010-03-18 07:14:51 ---
> please attach the full dmesg output after boot.
> so the problem doesn't exist if
> boot with boot option "thermal.off=1" if the thermal driver is built in,
> or
> thermal driver is blacklisted if it's built as a module.
> right?
> 

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.34-rc1-dbg-git6-r8169 (gcc version 4.4.3 (GCC) ) #47 SMP PREEMPT Tue Mar 16 21:35:08 EET 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffa8000 (usable)
[    0.000000]  BIOS-e820: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffbe000 - 0000000080000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7ffa8 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007ffa8000 (usable)
[    0.000000]  modified: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS)
[    0.000000]  modified: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[    0.000000]  modified: 000000007ffbe000 - 0000000080000000 (ACPI NVS)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 37e4e000 - 37fef001
[    0.000000] Allocated new RAMDISK: 00100000 - 002a1001
[    0.000000] Move RAMDISK from 0000000037e4e000 - 0000000037fef000 to 00100000 - 002a1000
[    0.000000] ACPI: RSDP 000f7af0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 7ffb0000 00040 (v01 _ASUS_ Notebook 06000811 MSFT 00000097)
[    0.000000] ACPI: FACP 7ffb0200 00084 (v02 AMI    OEMFACP  06000811 MSFT 00000097)
[    0.000000] ACPI: DSDT 7ffb05e0 08B86 (v01  F3J00 F3J00001 00000001 INTL 02002026)
[    0.000000] ACPI: FACS 7ffbe000 00040
[    0.000000] ACPI: APIC 7ffb0390 0005C (v01 AMI    OEMAPIC  06000811 MSFT 00000097)
[    0.000000] ACPI: MCFG 7ffb03f0 0003C (v01 AMI    OEMMCFG  06000811 MSFT 00000097)
[    0.000000] ACPI: BOOT 7ffb05b0 00028 (v01 AMI    OEMBOOT  06000811 MSFT 00000097)
[    0.000000] ACPI: SLIC 7ffb0430 00176 (v01 _ASUS_ Notebook 06000811 MSFT 00000097)
[    0.000000] ACPI: OEMB 7ffbe040 00046 (v01 AMI    AMI_OEM  06000811 MSFT 00000097)
[    0.000000] ACPI: HPET 7ffb9170 00038 (v01 AMI        ASUS 06000811 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1159MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00016000 - 0001cf00
[    0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #1 [0001000000 - 0001b8b484]    TEXT DATA BSS ==> [0001000000 - 0001b8b484]
[    0.000000]   #2 [0001b8c000 - 0001b941cd]              BRK ==> [0001b8c000 - 0001b941cd]
[    0.000000]   #3 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
[    0.000000]   #4 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
[    0.000000]   #5 [000009fc00 - 00000fd0c0]    BIOS reserved ==> [000009fc00 - 00000fd0c0]
[    0.000000]   #6 [00000fd23c - 00000ff780]    BIOS reserved ==> [00000fd23c - 00000ff780]
[    0.000000]   #7 [00000fd0c0 - 00000fd23c]     MP-table mpc ==> [00000fd0c0 - 00000fd23c]
[    0.000000]   #8 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
[    0.000000]   #9 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
[    0.000000]   #10 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
[    0.000000]   #11 [0000100000 - 00002a1001]      NEW RAMDISK ==> [0000100000 - 00002a1001]
[    0.000000]   #12 [0000016000 - 000001d000]          BOOTMAP ==> [0000016000 - 000001d000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007ffa8
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffa8
[    0.000000] On node 0 totalpages: 524087
[    0.000000] free_area_init_node: node 0, pgdat c1476940, node_mem_map c1b96200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2320 pages used for memmap
[    0.000000]   HighMem zone: 294554 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 333 pages/cpu @c2c00000 s1340180 r0 d23788 u2097152
[    0.000000] pcpu-alloc: s1340180 r0 d23788 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519991
[    0.000000] Kernel command line: root=/dev/sda5 rootfstype=ext4 ro 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007ffa8)
[    0.000000] Memory: 2062808k/2096800k available (2849k kernel code, 33540k reserved, 1740k data, 1640k init, 1187496k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff91000 - 0xfffff000   ( 440 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc147c000 - 0xc1616000   (1640 kB)
[    0.000000]       .data : 0xc12c8547 - 0xc147b928   (1740 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c8547   (2849 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:320
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3823 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1597.872 MHz processor.
[    0.003356] Calibrating delay loop (skipped), value calculated using timer frequency.. 3197.90 BogoMIPS (lpj=5326240)
[    0.003626] Security Framework initialized
[    0.003754] Mount-cache hash table entries: 512
[    0.007771] Initializing cgroup subsys ns
[    0.007855] Initializing cgroup subsys cpuacct
[    0.007950] Initializing cgroup subsys devices
[    0.008032] Initializing cgroup subsys blkio
[    0.008281] CPU: Physical Processor ID: 0
[    0.008361] CPU: Processor Core ID: 0
[    0.008442] mce: CPU supports 6 MCE banks
[    0.008527] CPU0: Thermal monitoring handled by SMI
[    0.008533] using mwait in idle threads.
[    0.008620] Performance Events: Core2 events, Intel PMU driver.
[    0.008869] ... version:                2
[    0.008950] ... bit width:              40
[    0.009029] ... generic registers:      2
[    0.009107] ... value mask:             000000ffffffffff
[    0.009187] ... max period:             000000007fffffff
[    0.009268] ... fixed-purpose events:   3
[    0.009346] ... event mask:             0000000700000003
[    0.009429] Checking 'hlt' instruction... OK.
[    0.020587] ACPI: Core revision 20100121
[    0.050272] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.050890] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084591] CPU0: Intel(R) Core(TM)2 CPU         T5200  @ 1.60GHz stepping 06
[    0.103394] lockdep: fixing up alternatives.
[    0.103700] Booting Node   0, Processors  #1 Ok.
[    0.006666] Initializing CPU#1
[    0.006666] CPU1: Thermal monitoring handled by SMI
[    0.200100] Brought up 2 CPUs
[    0.203341] Total of 2 processors activated (6394.89 BogoMIPS).
[    0.207232] NET: Registered protocol family 16
[    0.210275] ACPI: bus type pci registered
[    0.210291] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.210291] PCI: not using MMCONFIG
[    0.210619] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[    0.210703] PCI: Using configuration type 1 for base access
[    0.227086] bio: create slab <bio-0> at 0
[    0.255497] ACPI: EC: Look up EC in DSDT
[    0.282953] ACPI: Executed 1 blocks of module-level executable AML code
[    0.307653] ACPI: SSDT 7ffb91b0 00D24 (v01    AMI   CPU1PM 00000001 INTL 02002026)
[    0.316828] ACPI Warning: Incorrect checksum in table [SSDT] - 54, should be 97 (20100121/tbutils-314)
[    0.317053] ACPI: SSDT 7ffb9ee0 00D24 (v01    AMI   CPU2PM 00000001 INTL 02002026)
[    0.323625] ACPI: Interpreter enabled
[    0.323625] ACPI: (supports S0 S3 S4 S5)
[    0.323653] ACPI: Using IOAPIC for interrupt routing
[    0.323674] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.337813] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.337915] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[    0.338014] PCI: Using MMCONFIG for extended config space
[    0.390480] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.390711] ACPI Warning: Incorrect checksum in table [SSDT] - 54, should be 97 (20100121/tbutils-314)
[    0.391677] ACPI: No dock devices found.
[    0.391759] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.392141] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.393943] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.394036] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.394122] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.394218] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.394314] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
[    0.394841] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.394851] pci 0000:00:01.0: PME# disabled
[    0.395085] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
[    0.395243] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.395254] pci 0000:00:1b.0: PME# disabled
[    0.395500] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.395510] pci 0000:00:1c.0: PME# disabled
[    0.395763] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.395773] pci 0000:00:1c.1: PME# disabled
[    0.396026] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.396037] pci 0000:00:1c.2: PME# disabled
[    0.396204] pci 0000:00:1d.0: reg 20: [io  0xec00-0xec1f]
[    0.396369] pci 0000:00:1d.1: reg 20: [io  0xe880-0xe89f]
[    0.396748] pci 0000:00:1d.2: reg 20: [io  0xe800-0xe81f]
[    0.396913] pci 0000:00:1d.3: reg 20: [io  0xe480-0xe49f]
[    0.397068] pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff]
[    0.397231] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.397243] pci 0000:00:1d.7: PME# disabled
[    0.397628] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.397732] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.397830] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[    0.398073] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.398091] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.398109] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.398127] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.398145] pci 0000:00:1f.2: reg 20: [io  0xffa0-0xffaf]
[    0.398237] pci 0000:00:1f.2: PME# supported from D3hot
[    0.398248] pci 0000:00:1f.2: PME# disabled
[    0.398385] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.398670] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.398703] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.398736] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.398768] pci 0000:01:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[    0.398891] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.399132] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.399212] pci 0000:00:01.0:   bridge window [io  f000 - 0000] reg reading
[    0.399222] pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfdffffff]
[    0.399237] pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
[    0.399481] pci 0000:02:00.0: reg 10: [io  0xc800-0xc8ff]
[    0.399539] pci 0000:02:00.0: reg 18: [mem 0xfe0ff000-0xfe0fffff 64bit]
[    0.399596] pci 0000:02:00.0: reg 30: [mem 0xfe0e0000-0xfe0effff pref]
[    0.399724] pci 0000:02:00.0: supports D1 D2
[    0.399727] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.399739] pci 0000:02:00.0: PME# disabled
[    0.399788] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.399906] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.399988] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.400016] pci 0000:00:1c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
[    0.400035] pci 0000:00:1c.0:   bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[    0.400369] pci 0000:03:00.0: reg 10: [mem 0xfe1ff000-0xfe1fffff]
[    0.400719] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.400738] pci 0000:03:00.0: PME# disabled
[    0.400825] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.401000] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.401083] pci 0000:00:1c.1:   bridge window [io  f000 - 0000] reg reading
[    0.401094] pci 0000:00:1c.1:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.401112] pci 0000:00:1c.1:   bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[    0.401270] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.401352] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.401363] pci 0000:00:1c.2:   bridge window [mem 0xfe200000-0xfe9fffff]
[    0.401381] pci 0000:00:1c.2:   bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
[    0.401534] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.401623] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[    0.401736] pci 0000:06:01.0: reg 10: [mem 0xfeaff800-0xfeafffff]
[    0.401887] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[    0.401897] pci 0000:06:01.0: PME# disabled
[    0.401986] pci 0000:06:01.1: reg 10: [mem 0xfeaff400-0xfeaff4ff]
[    0.402136] pci 0000:06:01.1: supports D1 D2
[    0.402139] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.402150] pci 0000:06:01.1: PME# disabled
[    0.402237] pci 0000:06:01.2: reg 10: [mem 0xfeaff000-0xfeaff0ff]
[    0.402387] pci 0000:06:01.2: supports D1 D2
[    0.402391] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.402402] pci 0000:06:01.2: PME# disabled
[    0.402490] pci 0000:06:01.3: reg 10: [mem 0xfeafec00-0xfeafecff]
[    0.402642] pci 0000:06:01.3: supports D1 D2
[    0.402645] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.402656] pci 0000:06:01.3: PME# disabled
[    0.402845] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.402930] pci 0000:00:1e.0:   bridge window [io  f000 - 0000] reg reading
[    0.402941] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.402960] pci 0000:00:1e.0:   bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[    0.402964] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.402968] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.402972] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.402976] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.402980] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[    0.403059] pci_bus 0000:00: on NUMA node 0
[    0.403070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.403931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.404162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.404391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.404579] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.404816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.447112] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[    0.450421] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[    0.451222] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[    0.452020] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[    0.452820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.453860] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.454767] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.455673] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[    0.457110] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.457110] vgaarb: loaded
[    0.457239] SCSI subsystem initialized
[    0.463418] libata version 3.00 loaded.
[    0.463482] PCI: Using ACPI for IRQ routing
[    0.463564] PCI: pci_cache_line_size set to 64 bytes
[    0.464016] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.464022] reserve RAM buffer: 000000007ffa8000 - 000000007fffffff 
[    0.464147] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.464147] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.466934] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.473574] Switching to clocksource tsc
[    0.480545] pnp: PnP ACPI init
[    0.480665] ACPI: bus type pnp registered
[    0.490013] pnp: PnP ACPI: found 13 devices
[    0.490088] ACPI: ACPI bus type pnp unregistered
[    0.490162] PnPBIOS: Disabled by ACPI PNP
[    0.490273] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[    0.490388] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.490466] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.490543] system 00:08: [io  0x0480-0x04bf] has been reserved
[    0.490621] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.490700] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.490778] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.490857] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.490937] system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
[    0.491016] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[    0.491124] system 00:0a: [io  0x0250-0x0253] has been reserved
[    0.491201] system 00:0a: [io  0x0256-0x025f] has been reserved
[    0.491280] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.491359] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.491438] system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.491517] system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.491595] system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.491699] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.491803] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.491883] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.491964] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.492043] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.534510] PCI: max bus depth: 1 pci_try_num: 2
[    0.534635] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.534730] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.534822] pci 0000:00:1c.1: BAR 7: assigned [io  0x1000-0x1fff]
[    0.534898] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.534972] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.535056] pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfdffffff]
[    0.535140] pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
[    0.535240] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.535318] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.535405] pci 0000:00:1c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
[    0.535490] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.535593] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.535671] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.535758] pci 0000:00:1c.1:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.535843] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.535946] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.536025] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.536112] pci 0000:00:1c.2:   bridge window [mem 0xfe200000-0xfe9fffff]
[    0.536196] pci 0000:00:1c.2:   bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
[    0.536300] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.536374] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.536474] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.536560] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.536679] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.536762] pci 0000:00:01.0: setting latency timer to 64
[    0.536789] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.536873] pci 0000:00:1c.0: setting latency timer to 64
[    0.536898] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.536985] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.537071] pci 0000:00:1c.1: setting latency timer to 64
[    0.537103] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.537187] pci 0000:00:1c.2: setting latency timer to 64
[    0.537208] pci 0000:00:1e.0: setting latency timer to 64
[    0.537216] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.537219] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.537223] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.537227] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.537230] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[    0.537234] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfdffffff]
[    0.537237] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff 64bit pref]
[    0.537241] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.537245] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff]
[    0.537248] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.537252] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.537255] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.537259] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.537263] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.537266] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe9fffff]
[    0.537270] pci_bus 0000:04: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref]
[    0.537273] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.537277] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.537280] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.537283] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.537287] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[    0.537290] pci_bus 0000:06: resource 8 [mem 0x80000000-0xffffffff]
[    0.537444] NET: Registered protocol family 2
[    0.537979] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.539893] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.540731] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
[    0.551337] TCP: Hash tables configured (established 131072 bind 65536)
[    0.551493] TCP reno registered
[    0.551580] UDP hash table entries: 512 (order: 3, 49152 bytes)
[    0.551832] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
[    0.552491] NET: Registered protocol family 1
[    0.552945] pci 0000:01:00.0: Boot video device
[    0.553020] PCI: CLS 32 bytes, default 64
[    0.553435] Trying to unpack rootfs image as initramfs...
[    0.625788] Freeing initrd memory: 1668k freed
[    0.627775] Simple Boot Flag at 0x52 set to 0x1
[    0.630364] cpufreq-nforce2: No nForce2 chipset.
[    0.630924] Scanning for low memory corruption every 60 seconds
[    0.632043] audit: initializing netlink socket (disabled)
[    0.632188] type=2000 audit(1268914641.629:1): initialized
[    0.632790] highmem bounce pool size: 64 pages
[    0.632874] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.653291] VFS: Disk quotas dquot_6.5.2
[    0.653818] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.658466] msgmni has been set to 1712
[    0.663720] alg: No test for stdrng (krng)
[    0.664255] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.664368] io scheduler noop registered
[    0.664442] io scheduler deadline registered
[    0.664791] io scheduler cfq registered (default)
[    0.665508] pcieport 0000:00:01.0: setting latency timer to 64
[    0.665643] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.666212] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.666351] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.667266] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.667404] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.668139] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.668277] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.669369] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
[    0.669477] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
[    0.669598] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
[    0.669697] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
[    0.669819] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
[    0.669919] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
[    0.670018] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
[    0.670110] pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support
[    0.676095] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
[    0.676195] pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
[    0.676288] pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: no _OSC support
[    0.676389] pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
[    0.677552] nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.687717] nvidiafb: Device ID: 10de01d7 
[    0.699784] nvidiafb: CRTC0 analog not found
[    0.713088] nvidiafb: CRTC1 analog not found
[    0.713167] nvidiafb: CRTC 0 is currently programmed for DFP
[    0.713242] nvidiafb: Using DFP on CRTC 0
[    0.713316] nvidiafb: Panel size is 1280 x 800
[    0.713389] nvidiafb: Panel is LVDS
[    0.753859] nvidiafb: MTRR set to ON
[    0.753941] fbcvt: 1280x800@60: CVT Name - 1.024MA-R
[    0.912715] nvidiafb: Flat panel dithering disabled
[    0.915283] Console: switching to colour frame buffer device 160x50
[    0.916816] nvidiafb: PCI nVidia NV1d framebuffer (64MB @ 0xC0000000)
[    0.917950] ACPI: AC Adapter [AC0] (on-line)
[    0.918837] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.921140] ACPI: Lid Switch [LID]
[    0.921503] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.921545] ACPI: Power Button [PWRB]
[    0.921916] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.921951] ACPI: Sleep Button [SLPB]
[    0.922290] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.922322] ACPI: Power Button [PWRF]
[    0.926954] acpi device:17: registered as cooling_device0
[    0.927650] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input4
[    0.927688] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.928425] Marking TSC unstable due to TSC halts in idle
[    0.929177] Switching to clocksource hpet
[    0.943349] BUG: key f6b29750 not in .data!
[    0.943778] ------------[ cut here ]------------
[    0.943805] WARNING: at kernel/lockdep.c:2706 lockdep_init_map+0xc3/0xf3()
[    0.943830] Hardware name: F3JC                
[    0.943849] Modules linked in:
[    0.944432] Pid: 1, comm: swapper Not tainted 2.6.34-rc1-dbg-git6-r8169 #47
[    0.945028] Call Trace:
[    0.945644]  [<c102e293>] warn_slowpath_common+0x65/0x7c
[    0.946271]  [<c104df30>] ? lockdep_init_map+0xc3/0xf3
[    0.946926]  [<c102e2b7>] warn_slowpath_null+0xd/0x10
[    0.947620]  [<c104df30>] lockdep_init_map+0xc3/0xf3
[    0.948293]  [<c10e2e67>] sysfs_add_file_mode+0x4c/0x7e
[    0.948982]  [<c10e2ea7>] sysfs_add_file+0xe/0x13
[    0.949676]  [<c10e2f10>] sysfs_create_file+0x20/0x22
[    0.950384]  [<c1205421>] device_create_file+0x13/0x15
[    0.951113]  [<c1242e7b>] thermal_zone_device_register+0x396/0x5b7
[    0.951843]  [<c11dcc6e>] acpi_thermal_add+0x1cb/0x403
[    0.952584]  [<c10e3e43>] ? sysfs_do_create_link+0xc3/0xea
[    0.953339]  [<c11b30cf>] acpi_device_probe+0x3a/0x142
[    0.954115]  [<c1207239>] driver_probe_device+0x87/0x107
[    0.954914]  [<c12072f5>] __driver_attach+0x3c/0x54
[    0.955709]  [<c1206a3d>] bus_for_each_dev+0x3d/0x67
[    0.956520]  [<c1207102>] driver_attach+0x14/0x16
[    0.957344]  [<c12072b9>] ? __driver_attach+0x0/0x54
[    0.958174]  [<c1206df4>] bus_add_driver+0x92/0x1c6
[    0.958984]  [<c149b0d5>] ? acpi_thermal_init+0x0/0x6f
[    0.959792]  [<c1207527>] driver_register+0x79/0xe0
[    0.960598]  [<c149b0d5>] ? acpi_thermal_init+0x0/0x6f
[    0.961424]  [<c149b0d5>] ? acpi_thermal_init+0x0/0x6f
[    0.962220]  [<c11b3aa8>] acpi_bus_register_driver+0x3a/0x3c
[    0.963019]  [<c149b125>] acpi_thermal_init+0x50/0x6f
[    0.963818]  [<c1001139>] do_one_initcall+0x4c/0x136
[    0.964621]  [<c147c35b>] kernel_init+0x128/0x1a9
[    0.965402]  [<c147c233>] ? kernel_init+0x0/0x1a9
[    0.966178]  [<c1002e42>] kernel_thread_helper+0x6/0x1a
[    0.966966] ---[ end trace a22d306b065d4a66 ]---
[    0.967753] BUG: key f6b29780 not in .data!
[    0.968511] BUG: key f6b8b0a8 not in .data!
[    0.969791] thermal LNXTHERM:01: registered as thermal_zone0
[    0.970576] ACPI: Thermal Zone [THRM] (46 C)
[    0.971811] isapnp: Scanning for PnP cards...
[    1.128904] ACPI: Battery Slot [BAT0] (battery present)
[    1.329724] isapnp: No Plug & Play device found
[    1.338627] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.345189] brd: module loaded
[    1.346059] Uniform Multi-Platform E-IDE driver
[    1.347342] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.350215] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.352914] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.353785] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.354572] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.355327] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.356073] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.357125] mice: PS/2 mouse device common for all mice
[    1.358030] rtc_cmos 00:03: RTC can wake from S4
[    1.358908] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.359690] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.360580] i2c /dev entries driver
[    1.362264] EDAC MC: Ver: 2.1.0 Mar 16 2010
[    1.364036] cpuidle: using governor ladder
[    1.365808] cpuidle: using governor menu
[    1.367381] TCP cubic registered
[    1.368141] NET: Registered protocol family 17
[    1.391013] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.392338] Using IPI No-Shortcut mode
[    1.393578] registered taskstats version 1
[    1.394995] rtc_cmos 00:03: setting system clock to 2010-03-18 12:17:22 UTC (1268914642)
[    1.395933] Freeing unused kernel memory: 1640k freed
[    1.397781] Write protecting the kernel text: 2852k
[    1.398723] Write protecting the kernel read-only data: 1448k
[    1.428479] ata_piix 0000:00:1f.2: version 2.13
[    1.429361] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.430206] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.431181] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.432150] scsi0 : ata_piix
[    1.433217] scsi1 : ata_piix
[    1.436627] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.437553] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.607474] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[    1.607682] ata1.00: ATA-7: Hitachi HTS541212H9SA00, HP4OC20F, max UDMA/100
[    1.607690] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.620689] ata1.00: configured for UDMA/100
[    1.622342] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54121 HP4O PQ: 0 ANSI: 5
[    1.624833] ata2.00: configured for UDMA/33
[    1.643907] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.644866] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PR03 PQ: 0 ANSI: 5
[    1.647138] sd 0:0:0:0: [sda] Write Protect is off
[    1.648146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.649235] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.650549]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    1.727706] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.749144] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.750159] Uniform CD-ROM driver Revision: 3.20
[    1.751371] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.758271] usbcore: registered new interface driver usbfs
[    1.759466] usbcore: registered new interface driver hub
[    1.760674] usbcore: registered new device driver usb
[    1.765463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.766596] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.767715] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.768865] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.769865] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.770939] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.771966] ehci_hcd 0000:00:1d.7: debug port 1
[    1.776964] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.778018] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[    1.793393] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.795031] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.796549] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.798107] usb usb1: Product: EHCI Host Controller
[    1.799594] usb usb1: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 ehci_hcd
[    1.801118] usb usb1: SerialNumber: 0000:00:1d.7
[    1.802957] hub 1-0:1.0: USB hub found
[    1.804537] hub 1-0:1.0: 8 ports detected
[    1.813962] uhci_hcd: USB Universal Host Controller Interface driver
[    1.815172] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.816170] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.817433] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.819061] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.820209] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
[    1.821281] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.822257] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.823224] usb usb2: Product: UHCI Host Controller
[    1.824230] usb usb2: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd
[    1.825195] usb usb2: SerialNumber: 0000:00:1d.0
[    1.826339] hub 2-0:1.0: USB hub found
[    1.827357] hub 2-0:1.0: 2 ports detected
[    1.828494] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.829435] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.830381] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.831323] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.832291] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[    1.833275] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.834208] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.835091] usb usb3: Product: UHCI Host Controller
[    1.835974] usb usb3: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd
[    1.836869] usb usb3: SerialNumber: 0000:00:1d.1
[    1.842612] hub 3-0:1.0: USB hub found
[    1.844525] hub 3-0:1.0: 2 ports detected
[    1.848838] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.849766] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.850732] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.851645] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.852593] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    1.853642] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.854658] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.855583] usb usb4: Product: UHCI Host Controller
[    1.856483] usb usb4: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd
[    1.857405] usb usb4: SerialNumber: 0000:00:1d.2
[    1.858478] hub 4-0:1.0: USB hub found
[    1.859398] hub 4-0:1.0: 2 ports detected
[    1.860440] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.861353] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.862251] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.863152] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.864121] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
[    1.865101] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.866017] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.866966] usb usb5: Product: UHCI Host Controller
[    1.867880] usb usb5: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd
[    1.868804] usb usb5: SerialNumber: 0000:00:1d.3
[    1.869897] hub 5-0:1.0: USB hub found
[    1.870856] hub 5-0:1.0: 2 ports detected
[    2.110072] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    2.234359] usb 1-8: New USB device found, idVendor=05e1, idProduct=0501
[    2.235612] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.236876] usb 1-8: Product: USB 2.0 Image Capture Controller
[    2.238057] usb 1-8: Manufacturer: Syntek Semiconductor
[    3.174354] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    4.975058] udev: starting version 151
[    5.414689] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.414704] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMB0 [0x400-0x40f]
[    5.414711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.489923] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.489957] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.490035] r8169 0000:02:00.0: setting latency timer to 64
[    5.490155] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[    5.490939] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xfd188000, 00:1a:92:c9:a0:68, XID 18000000 IRQ 28
[    5.513182] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.513242] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.871539] intel_rng: FWH not detected
[    6.218311] asus_laptop: Asus Laptop Support version 0.42
[    6.222439] asus_laptop:   F3JC model detected
[    6.222915] asus_laptop: Backlight controlled by ACPI video driver
[    6.263902] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input6
[    6.280047] Registered led device: asus::touchpad
[    6.357819] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.357924] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[    6.357980] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    6.365605] sdhci: Secure Digital Host Controller Interface driver
[    6.365609] sdhci: Copyright(c) Pierre Ossman
[    6.367418] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 19)
[    6.367445] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.368493] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    6.369581] Registered led device: mmc0::
[    6.370690] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA
[    6.716686] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[    6.723905] hda_codec: ALC660-VD: BIOS auto-probing.
[    6.760330] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[...]


	Sergey
Comment 3 Sergey Senozhatsky 2010-03-18 12:39:36 UTC
On (03/18/10 07:15), bugzilla-daemon@bugzilla.kernel.org wrote:
> --- Comment #1 from Zhang Rui <rui.zhang@intel.com>  2010-03-18 07:14:51 ---
> so the problem doesn't exist if
> boot with boot option "thermal.off=1" if the thermal driver is built in,
...
> right?
> 

Correct. thermal.off=1 dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.34-rc1-dbg-git6-r8169 (gcc version 4.4.3 (GCC) ) #47 SMP PREEMPT Tue Mar 16 21:35:08 EET 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffa8000 (usable)
[    0.000000]  BIOS-e820: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffbe000 - 0000000080000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7ffa8 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007ffa8000 (usable)
[    0.000000]  modified: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS)
[    0.000000]  modified: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[    0.000000]  modified: 000000007ffbe000 - 0000000080000000 (ACPI NVS)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 37e4e000 - 37fef001
[    0.000000] Allocated new RAMDISK: 00100000 - 002a1001
[    0.000000] Move RAMDISK from 0000000037e4e000 - 0000000037fef000 to 00100000 - 002a1000
[    0.000000] ACPI: RSDP 000f7af0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 7ffb0000 00040 (v01 _ASUS_ Notebook 06000811 MSFT 00000097)
[    0.000000] ACPI: FACP 7ffb0200 00084 (v02 AMI    OEMFACP  06000811 MSFT 00000097)
[    0.000000] ACPI: DSDT 7ffb05e0 08B86 (v01  F3J00 F3J00001 00000001 INTL 02002026)
[    0.000000] ACPI: FACS 7ffbe000 00040
[    0.000000] ACPI: APIC 7ffb0390 0005C (v01 AMI    OEMAPIC  06000811 MSFT 00000097)
[    0.000000] ACPI: MCFG 7ffb03f0 0003C (v01 AMI    OEMMCFG  06000811 MSFT 00000097)
[    0.000000] ACPI: BOOT 7ffb05b0 00028 (v01 AMI    OEMBOOT  06000811 MSFT 00000097)
[    0.000000] ACPI: SLIC 7ffb0430 00176 (v01 _ASUS_ Notebook 06000811 MSFT 00000097)
[    0.000000] ACPI: OEMB 7ffbe040 00046 (v01 AMI    AMI_OEM  06000811 MSFT 00000097)
[    0.000000] ACPI: HPET 7ffb9170 00038 (v01 AMI        ASUS 06000811 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1159MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00016000 - 0001cf00
[    0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #1 [0001000000 - 0001b8b484]    TEXT DATA BSS ==> [0001000000 - 0001b8b484]
[    0.000000]   #2 [0001b8c000 - 0001b941cd]              BRK ==> [0001b8c000 - 0001b941cd]
[    0.000000]   #3 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
[    0.000000]   #4 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
[    0.000000]   #5 [000009fc00 - 00000fd0c0]    BIOS reserved ==> [000009fc00 - 00000fd0c0]
[    0.000000]   #6 [00000fd23c - 00000ff780]    BIOS reserved ==> [00000fd23c - 00000ff780]
[    0.000000]   #7 [00000fd0c0 - 00000fd23c]     MP-table mpc ==> [00000fd0c0 - 00000fd23c]
[    0.000000]   #8 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
[    0.000000]   #9 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
[    0.000000]   #10 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
[    0.000000]   #11 [0000100000 - 00002a1001]      NEW RAMDISK ==> [0000100000 - 00002a1001]
[    0.000000]   #12 [0000016000 - 000001d000]          BOOTMAP ==> [0000016000 - 000001d000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007ffa8
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffa8
[    0.000000] On node 0 totalpages: 524087
[    0.000000] free_area_init_node: node 0, pgdat c1476940, node_mem_map c1b96200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2320 pages used for memmap
[    0.000000]   HighMem zone: 294554 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 333 pages/cpu @c2c00000 s1340180 r0 d23788 u2097152
[    0.000000] pcpu-alloc: s1340180 r0 d23788 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519991
[    0.000000] Kernel command line: root=/dev/sda5 rootfstype=ext4 ro thermal.off=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007ffa8)
[    0.000000] Memory: 2062808k/2096800k available (2849k kernel code, 33540k reserved, 1740k data, 1640k init, 1187496k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff91000 - 0xfffff000   ( 440 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc147c000 - 0xc1616000   (1640 kB)
[    0.000000]       .data : 0xc12c8547 - 0xc147b928   (1740 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c8547   (2849 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:320
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3823 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1597.922 MHz processor.
[    0.003356] Calibrating delay loop (skipped), value calculated using timer frequency.. 3197.00 BogoMIPS (lpj=5326406)
[    0.003625] Security Framework initialized
[    0.003753] Mount-cache hash table entries: 512
[    0.007330] Initializing cgroup subsys ns
[    0.007414] Initializing cgroup subsys cpuacct
[    0.007508] Initializing cgroup subsys devices
[    0.007590] Initializing cgroup subsys blkio
[    0.007839] CPU: Physical Processor ID: 0
[    0.007919] CPU: Processor Core ID: 0
[    0.007999] mce: CPU supports 6 MCE banks
[    0.008084] CPU0: Thermal monitoring handled by SMI
[    0.008091] using mwait in idle threads.
[    0.008177] Performance Events: Core2 events, Intel PMU driver.
[    0.008427] ... version:                2
[    0.008507] ... bit width:              40
[    0.008585] ... generic registers:      2
[    0.008663] ... value mask:             000000ffffffffff
[    0.008744] ... max period:             000000007fffffff
[    0.008824] ... fixed-purpose events:   3
[    0.008902] ... event mask:             0000000700000003
[    0.008984] Checking 'hlt' instruction... OK.
[    0.020587] ACPI: Core revision 20100121
[    0.050273] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.050893] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.085896] CPU0: Intel(R) Core(TM)2 CPU         T5200  @ 1.60GHz stepping 06
[    0.103394] lockdep: fixing up alternatives.
[    0.103698] Booting Node   0, Processors  #1 Ok.
[    0.006666] Initializing CPU#1
[    0.006666] CPU1: Thermal monitoring handled by SMI
[    0.203433] Brought up 2 CPUs
[    0.203591] Total of 2 processors activated (6394.97 BogoMIPS).
[    0.207208] NET: Registered protocol family 16
[    0.210163] ACPI: bus type pci registered
[    0.210292] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.210292] PCI: not using MMCONFIG
[    0.210618] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[    0.210702] PCI: Using configuration type 1 for base access
[    0.227184] bio: create slab <bio-0> at 0
[    0.255060] ACPI: EC: Look up EC in DSDT
[    0.282076] ACPI: Executed 1 blocks of module-level executable AML code
[    0.307590] ACPI: SSDT 7ffb91b0 00D24 (v01    AMI   CPU1PM 00000001 INTL 02002026)
[    0.314113] ACPI Warning: Incorrect checksum in table [SSDT] - 54, should be 97 (20100121/tbutils-314)
[    0.314187] ACPI: SSDT 7ffb9ee0 00D24 (v01    AMI   CPU2PM 00000001 INTL 02002026)
[    0.322466] ACPI: Interpreter enabled
[    0.322466] ACPI: (supports S0 S3 S4 S5)
[    0.323550] ACPI: Using IOAPIC for interrupt routing
[    0.323723] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.336797] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.336900] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[    0.336999] PCI: Using MMCONFIG for extended config space
[    0.387733] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.387863] ACPI Warning: Incorrect checksum in table [SSDT] - 54, should be 97 (20100121/tbutils-314)
[    0.390938] ACPI: No dock devices found.
[    0.391022] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.391407] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.391707] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.391707] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.391707] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.391707] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.391707] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
[    0.391707] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.391707] pci 0000:00:01.0: PME# disabled
[    0.393495] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
[    0.393653] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.393664] pci 0000:00:1b.0: PME# disabled
[    0.393910] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.393920] pci 0000:00:1c.0: PME# disabled
[    0.394173] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.394184] pci 0000:00:1c.1: PME# disabled
[    0.394436] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.394446] pci 0000:00:1c.2: PME# disabled
[    0.394613] pci 0000:00:1d.0: reg 20: [io  0xec00-0xec1f]
[    0.394775] pci 0000:00:1d.1: reg 20: [io  0xe880-0xe89f]
[    0.394937] pci 0000:00:1d.2: reg 20: [io  0xe800-0xe81f]
[    0.395099] pci 0000:00:1d.3: reg 20: [io  0xe480-0xe49f]
[    0.395254] pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff]
[    0.395415] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.395427] pci 0000:00:1d.7: PME# disabled
[    0.395811] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.395915] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.396012] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[    0.396253] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.396271] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.396290] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.396308] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.396326] pci 0000:00:1f.2: reg 20: [io  0xffa0-0xffaf]
[    0.396418] pci 0000:00:1f.2: PME# supported from D3hot
[    0.396428] pci 0000:00:1f.2: PME# disabled
[    0.396564] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.396869] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.396902] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.396935] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.396967] pci 0000:01:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[    0.397091] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.397332] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.397413] pci 0000:00:01.0:   bridge window [io  f000 - 0000] reg reading
[    0.397422] pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfdffffff]
[    0.397437] pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
[    0.397680] pci 0000:02:00.0: reg 10: [io  0xc800-0xc8ff]
[    0.397738] pci 0000:02:00.0: reg 18: [mem 0xfe0ff000-0xfe0fffff 64bit]
[    0.397796] pci 0000:02:00.0: reg 30: [mem 0xfe0e0000-0xfe0effff pref]
[    0.397924] pci 0000:02:00.0: supports D1 D2
[    0.397927] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.397940] pci 0000:02:00.0: PME# disabled
[    0.397988] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.398107] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.398188] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.398199] pci 0000:00:1c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
[    0.398218] pci 0000:00:1c.0:   bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[    0.398548] pci 0000:03:00.0: reg 10: [mem 0xfe1ff000-0xfe1fffff]
[    0.398897] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.398915] pci 0000:03:00.0: PME# disabled
[    0.399002] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.399176] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.399258] pci 0000:00:1c.1:   bridge window [io  f000 - 0000] reg reading
[    0.399269] pci 0000:00:1c.1:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.399287] pci 0000:00:1c.1:   bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[    0.399443] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.399525] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.399536] pci 0000:00:1c.2:   bridge window [mem 0xfe200000-0xfe9fffff]
[    0.399555] pci 0000:00:1c.2:   bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
[    0.399709] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.399799] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[    0.399911] pci 0000:06:01.0: reg 10: [mem 0xfeaff800-0xfeafffff]
[    0.400077] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[    0.400087] pci 0000:06:01.0: PME# disabled
[    0.400175] pci 0000:06:01.1: reg 10: [mem 0xfeaff400-0xfeaff4ff]
[    0.400325] pci 0000:06:01.1: supports D1 D2
[    0.400328] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.400339] pci 0000:06:01.1: PME# disabled
[    0.400426] pci 0000:06:01.2: reg 10: [mem 0xfeaff000-0xfeaff0ff]
[    0.400574] pci 0000:06:01.2: supports D1 D2
[    0.400577] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.400588] pci 0000:06:01.2: PME# disabled
[    0.400675] pci 0000:06:01.3: reg 10: [mem 0xfeafec00-0xfeafecff]
[    0.400824] pci 0000:06:01.3: supports D1 D2
[    0.400827] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.400837] pci 0000:06:01.3: PME# disabled
[    0.401024] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.401110] pci 0000:00:1e.0:   bridge window [io  f000 - 0000] reg reading
[    0.401121] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.401139] pci 0000:00:1e.0:   bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[    0.401143] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.401147] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.401151] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.401155] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.401160] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[    0.401238] pci_bus 0000:00: on NUMA node 0
[    0.401249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.402052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.402262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.402487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.402684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.402920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.447063] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[    0.447921] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[    0.448720] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[    0.449517] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[    0.450421] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.451327] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.452235] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.453141] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[    0.453868] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.453868] vgaarb: loaded
[    0.453966] SCSI subsystem initialized
[    0.460151] libata version 3.00 loaded.
[    0.460319] PCI: Using ACPI for IRQ routing
[    0.460319] PCI: pci_cache_line_size set to 64 bytes
[    0.460638] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.460644] reserve RAM buffer: 000000007ffa8000 - 000000007fffffff 
[    0.460763] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.460763] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.463518] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.470168] Switching to clocksource tsc
[    0.477234] pnp: PnP ACPI init
[    0.477354] ACPI: bus type pnp registered
[    0.486574] pnp: PnP ACPI: found 13 devices
[    0.486649] ACPI: ACPI bus type pnp unregistered
[    0.486724] PnPBIOS: Disabled by ACPI PNP
[    0.486832] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[    0.486947] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.487025] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.487102] system 00:08: [io  0x0480-0x04bf] has been reserved
[    0.487180] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.487259] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.487337] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.487416] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.487496] system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
[    0.487575] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[    0.487681] system 00:0a: [io  0x0250-0x0253] has been reserved
[    0.487758] system 00:0a: [io  0x0256-0x025f] has been reserved
[    0.487836] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.487916] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.487994] system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.488073] system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.488152] system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.488256] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.488360] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.488441] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.488520] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.488600] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.531106] PCI: max bus depth: 1 pci_try_num: 2
[    0.531231] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.531325] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.531419] pci 0000:00:1c.1: BAR 7: assigned [io  0x1000-0x1fff]
[    0.531495] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.531569] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.531654] pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfdffffff]
[    0.531737] pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
[    0.531837] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.531917] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.532003] pci 0000:00:1c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
[    0.532088] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.532191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.532269] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.532356] pci 0000:00:1c.1:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.532440] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.532543] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.532621] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.532708] pci 0000:00:1c.2:   bridge window [mem 0xfe200000-0xfe9fffff]
[    0.532793] pci 0000:00:1c.2:   bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
[    0.532896] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.532970] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.533057] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.533155] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.533274] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.533357] pci 0000:00:01.0: setting latency timer to 64
[    0.533384] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.533468] pci 0000:00:1c.0: setting latency timer to 64
[    0.533493] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.533580] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.533665] pci 0000:00:1c.1: setting latency timer to 64
[    0.533697] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.533782] pci 0000:00:1c.2: setting latency timer to 64
[    0.533802] pci 0000:00:1e.0: setting latency timer to 64
[    0.533810] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.533814] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.533817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.533821] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.533824] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[    0.533828] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfdffffff]
[    0.533832] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff 64bit pref]
[    0.533835] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.533839] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff]
[    0.533843] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.533846] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.533850] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.533853] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.533857] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.533860] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe9fffff]
[    0.533864] pci_bus 0000:04: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref]
[    0.533868] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.533871] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.533874] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.533878] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.533881] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[    0.533885] pci_bus 0000:06: resource 8 [mem 0x80000000-0xffffffff]
[    0.534042] NET: Registered protocol family 2
[    0.534574] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.536495] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.537327] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
[    0.548001] TCP: Hash tables configured (established 131072 bind 65536)
[    0.548158] TCP reno registered
[    0.548243] UDP hash table entries: 512 (order: 3, 49152 bytes)
[    0.548495] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
[    0.549154] NET: Registered protocol family 1
[    0.549616] pci 0000:01:00.0: Boot video device
[    0.549691] PCI: CLS 32 bytes, default 64
[    0.550056] Trying to unpack rootfs image as initramfs...
[    0.622388] Freeing initrd memory: 1668k freed
[    0.624367] Simple Boot Flag at 0x52 set to 0x1
[    0.626918] cpufreq-nforce2: No nForce2 chipset.
[    0.627475] Scanning for low memory corruption every 60 seconds
[    0.628638] audit: initializing netlink socket (disabled)
[    0.628779] type=2000 audit(1268915769.626:1): initialized
[    0.629381] highmem bounce pool size: 64 pages
[    0.629465] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.646572] VFS: Disk quotas dquot_6.5.2
[    0.647130] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.651947] msgmni has been set to 1712
[    0.657215] alg: No test for stdrng (krng)
[    0.657779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.657892] io scheduler noop registered
[    0.657965] io scheduler deadline registered
[    0.658320] io scheduler cfq registered (default)
[    0.659034] pcieport 0000:00:01.0: setting latency timer to 64
[    0.659169] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.659789] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.659927] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.660659] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.660796] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.661538] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.661675] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.662766] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
[    0.662873] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
[    0.662991] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
[    0.663233] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
[    0.663327] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
[    0.663426] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
[    0.663524] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
[    0.669504] pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support
[    0.669605] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
[    0.669703] pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
[    0.669805] pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: no _OSC support
[    0.669908] pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
[    0.671026] nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.681415] nvidiafb: Device ID: 10de01d7 
[    0.693097] nvidiafb: CRTC0 analog not found
[    0.706417] nvidiafb: CRTC1 analog not found
[    0.706496] nvidiafb: CRTC 0 is currently programmed for DFP
[    0.706571] nvidiafb: Using DFP on CRTC 0
[    0.706644] nvidiafb: Panel size is 1280 x 800
[    0.706717] nvidiafb: Panel is LVDS
[    0.747496] nvidiafb: MTRR set to ON
[    0.747578] fbcvt: 1280x800@60: CVT Name - 1.024MA-R
[    0.906708] nvidiafb: Flat panel dithering disabled
[    0.909259] Console: switching to colour frame buffer device 160x50
[    0.910795] nvidiafb: PCI nVidia NV1d framebuffer (64MB @ 0xC0000000)
[    0.911974] ACPI: AC Adapter [AC0] (on-line)
[    0.912855] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.914735] ACPI: Lid Switch [LID]
[    0.915094] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.915136] ACPI: Power Button [PWRB]
[    0.915488] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.915524] ACPI: Sleep Button [SLPB]
[    0.915868] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.915900] ACPI: Power Button [PWRF]
[    0.920239] acpi device:17: registered as cooling_device0
[    0.920934] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input4
[    0.920973] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.921704] Marking TSC unstable due to TSC halts in idle
[    0.922451] Switching to clocksource hpet
[    0.932592] ACPI: thermal control disabled
[    0.933506] isapnp: Scanning for PnP cards...
[    1.125764] ACPI: Battery Slot [BAT0] (battery present)
[    1.291099] isapnp: No Plug & Play device found
[    1.307865] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.320619] brd: module loaded
[    1.320890] Uniform Multi-Platform E-IDE driver
[    1.321792] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.324381] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.326309] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.327128] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.327768] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.328415] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.329059] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.330280] mice: PS/2 mouse device common for all mice
[    1.331199] rtc_cmos 00:03: RTC can wake from S4
[    1.332279] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.333021] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.333981] i2c /dev entries driver
[    1.336895] EDAC MC: Ver: 2.1.0 Mar 16 2010
[    1.339594] cpuidle: using governor ladder
[    1.342863] cpuidle: using governor menu
[    1.346080] TCP cubic registered
[    1.346990] NET: Registered protocol family 17
[    1.365057] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.402147] Using IPI No-Shortcut mode
[    1.403850] registered taskstats version 1
[    1.405856] rtc_cmos 00:03: setting system clock to 2010-03-18 12:36:10 UTC (1268915770)
[    1.407469] Freeing unused kernel memory: 1640k freed
[    1.410125] Write protecting the kernel text: 2852k
[    1.411407] Write protecting the kernel read-only data: 1448k
[    1.490388] ata_piix 0000:00:1f.2: version 2.13
[    1.490455] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.491563] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.492752] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.493045] scsi0 : ata_piix
[    1.494814] scsi1 : ata_piix
[    1.500585] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.501554] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.670983] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[    1.672522] ata1.00: ATA-7: Hitachi HTS541212H9SA00, HP4OC20F, max UDMA/100
[    1.673924] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.683844] ata2.00: configured for UDMA/33
[    1.687589] ata1.00: configured for UDMA/100
[    1.702281] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54121 HP4O PQ: 0 ANSI: 5
[    1.710649] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PR03 PQ: 0 ANSI: 5
[    1.742815] usbcore: registered new interface driver usbfs
[    1.744139] usbcore: registered new interface driver hub
[    1.746156] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.747464] sd 0:0:0:0: [sda] Write Protect is off
[    1.748417] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.748549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.748639] usbcore: registered new device driver usb
[    1.751551]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    1.841569] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.857671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.858885] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.859979] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.859987] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.861474] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.862570] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.863684] ehci_hcd 0000:00:1d.7: debug port 1
[    1.868815] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.868876] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[    1.869961] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.871015] Uniform CD-ROM driver Revision: 3.20
[    1.872981] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.884348] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.885820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.886922] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.888064] usb usb1: Product: EHCI Host Controller
[    1.889115] usb usb1: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 ehci_hcd
[    1.890159] usb usb1: SerialNumber: 0000:00:1d.7
[    1.892714] hub 1-0:1.0: USB hub found
[    1.893763] hub 1-0:1.0: 8 ports detected
[    1.909732] uhci_hcd: USB Universal Host Controller Interface driver
[    1.911015] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.912130] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.912139] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.913263] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.914461] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
[    1.915739] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.916942] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.917974] usb usb2: Product: UHCI Host Controller
[    1.918975] usb usb2: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd
[    1.919958] usb usb2: SerialNumber: 0000:00:1d.0
[    1.921525] hub 2-0:1.0: USB hub found
[    1.922663] hub 2-0:1.0: 2 ports detected
[    1.924088] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.925088] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.925096] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.926098] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.927231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[    1.928359] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.929346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.930337] usb usb3: Product: UHCI Host Controller
[    1.931312] usb usb3: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd
[    1.932276] usb usb3: SerialNumber: 0000:00:1d.1
[    1.933718] hub 3-0:1.0: USB hub found
[    1.934921] hub 3-0:1.0: 2 ports detected
[    1.936853] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.937892] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.937900] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.938934] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.940057] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    1.941243] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.942241] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.943247] usb usb4: Product: UHCI Host Controller
[    1.944208] usb usb4: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd
[    1.945125] usb usb4: SerialNumber: 0000:00:1d.2
[    1.946429] hub 4-0:1.0: USB hub found
[    1.947445] hub 4-0:1.0: 2 ports detected
[    1.948740] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.949678] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.949685] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.950645] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.951651] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
[    1.952760] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.953810] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.954827] usb usb5: Product: UHCI Host Controller
[    1.955842] usb usb5: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd
[    1.957033] usb usb5: SerialNumber: 0000:00:1d.3
[    1.958363] hub 5-0:1.0: USB hub found
[    1.959321] hub 5-0:1.0: 2 ports detected
[    2.201091] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    2.327718] usb 1-8: New USB device found, idVendor=05e1, idProduct=0501
[    2.328884] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.330440] usb 1-8: Product: USB 2.0 Image Capture Controller
[    2.331424] usb 1-8: Manufacturer: Syntek Semiconductor
[    3.788623] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    5.854647] udev: starting version 151
[    6.782844] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.782897] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.783008] r8169 0000:02:00.0: setting latency timer to 64
[    6.783192] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[    6.785492] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf917a000, 00:1a:92:c9:a0:68, XID 18000000 IRQ 28
[    6.885382] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.885391] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMB0 [0x400-0x40f]
[    6.885395] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.885989] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.890100] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    6.929400] intel_rng: FWH not detected
[    7.802994] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.803158] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[    7.803332] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.837738] sdhci: Secure Digital Host Controller Interface driver
[    7.837743] sdhci: Copyright(c) Pierre Ossman
[    7.840109] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 19)
[    7.840151] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.841386] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    7.916948] Registered led device: mmc0::
[    7.917807] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA
[    8.094125] asus_laptop: Asus Laptop Support version 0.42
[    8.147540] asus_laptop:   F3JC model detected
[    8.148295] asus_laptop: Backlight controlled by ACPI video driver
[    8.148497] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input6
[    8.216563] Registered led device: asus::touchpad
[    8.238826] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[    8.334245] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[    8.365569] hda_codec: ALC660-VD: BIOS auto-probing.



	Sergey
Comment 4 Wolfram Sang 2010-03-22 06:38:55 UTC
Can you try this patch?

https://patchwork.kernel.org/patch/87359/
Comment 5 Zhang Rui 2010-03-22 08:04:16 UTC
*** Bug 15584 has been marked as a duplicate of this bug. ***
Comment 6 Sergey Senozhatsky 2010-03-22 11:36:29 UTC
On (03/22/10 06:39), bugzilla-daemon@bugzilla.kernel.org wrote:
> Can you try this patch?
> 
> https://patchwork.kernel.org/patch/87359/
> 

Sure. Will try.


	Sergey
Comment 7 Sergey Senozhatsky 2010-03-22 13:11:46 UTC
On (03/22/10 06:39), bugzilla-daemon@bugzilla.kernel.org wrote:
> --- Comment #4 from Wolfram Sang <w.sang@pengutronix.de>  2010-03-22 06:38:55 ---
> Can you try this patch?
> 
> https://patchwork.kernel.org/patch/87359/
> 

Nope. Doesn't fix. The following patch does:



Initialize sysfs attributes before device_create_file call.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

---
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 5066de5..a76a6ff 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -492,6 +492,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 		goto free_mem;
 	}
 	dev_set_drvdata(hwmon->device, hwmon);
+	sysfs_attr_init(&dev_attr_name.attr);
 	result = device_create_file(hwmon->device, &dev_attr_name);
 	if (result)
 		goto unregister_hwmon_device;
@@ -505,6 +506,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 	tz->temp_input.attr.attr.name = tz->temp_input.name;
 	tz->temp_input.attr.attr.mode = 0444;
 	tz->temp_input.attr.show = temp_input_show;
+	sysfs_attr_init(&tz->temp_input.attr.attr);
 	result = device_create_file(hwmon->device, &tz->temp_input.attr);
 	if (result)
 		goto unregister_hwmon_device;
@@ -517,6 +519,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 			tz->temp_crit.attr.attr.name = tz->temp_crit.name;
 			tz->temp_crit.attr.attr.mode = 0444;
 			tz->temp_crit.attr.show = temp_crit_show;
+			sysfs_attr_init(&tz->temp_crit.attr.attr);
 			result = device_create_file(hwmon->device,
 						    &tz->temp_crit.attr);
 			if (result)
Comment 8 Sergey Senozhatsky 2010-03-22 13:55:25 UTC
On (03/22/10 06:39), bugzilla-daemon@bugzilla.kernel.org wrote:
> --- Comment #4 from Wolfram Sang <w.sang@pengutronix.de>  2010-03-22 06:38:55 ---
> Can you try this patch?
> 
> https://patchwork.kernel.org/patch/87359/
> 

Sorry, copy-paste from mail sent to the list.

***

Nope. Sorry, I didn't test carefully. Oh, Monday...
Proposed patch doesn't fix the problem. The gives below
patch does.

Note that thermal_zone_bind_cooling_device part was proposed by 
Wolfram Sang here:
https://patchwork.kernel.org/patch/87359/

So, Wolfram, we need to cooperate to solve the problem.

Initialize sysfs attributes before device_create_file call.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
---

diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 5066de5..ecb181d 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -505,6 +505,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 	tz->temp_input.attr.attr.name = tz->temp_input.name;
 	tz->temp_input.attr.attr.mode = 0444;
 	tz->temp_input.attr.show = temp_input_show;
+	sysfs_attr_init(&tz->temp_input.attr.attr);
 	result = device_create_file(hwmon->device, &tz->temp_input.attr);
 	if (result)
 		goto unregister_hwmon_device;
@@ -517,6 +518,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 			tz->temp_crit.attr.attr.name = tz->temp_crit.name;
 			tz->temp_crit.attr.attr.mode = 0444;
 			tz->temp_crit.attr.show = temp_crit_show;
+			sysfs_attr_init(&tz->temp_crit.attr.attr);
 			result = device_create_file(hwmon->device,
 						    &tz->temp_crit.attr);
 			if (result)
@@ -725,6 +727,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 		goto release_idr;
 
 	sprintf(dev->attr_name, "cdev%d_trip_point", dev->id);
+	sysfs_attr_init(&dev->attr.attr);
 	dev->attr.attr.name = dev->attr_name;
 	dev->attr.attr.mode = 0444;
 	dev->attr.show = thermal_cooling_device_trip_point_show;
Comment 9 Rafael J. Wysocki 2010-03-22 19:56:52 UTC
Patch : https://bugzilla.kernel.org/show_bug.cgi?id=15548#c8
Comment 10 Rafael J. Wysocki 2010-04-07 20:16:21 UTC
Fixed by commit 975f8c5653acba461229e671202113da69b87be .

Note You need to log in before you can comment on or make changes to this bug.