Created attachment 220361 [details] alsa-info.txt Hi, sound blaster z 1102:0023 doesn't work on ubuntu 16.04 4.4.14 (4.4.0-25-generic) only front line out works everything else doesn't work (i don't have spdif device didn't test) spdif input detected and working but no sound from front line out extracted latest dsp firmware from windowz driver, new firmware didn't change anything hda-verb /dev/snd/hwC1D1 0x15 GET_PIN_SENSE 0 nid = 0x15, verb = 0xf09, param = 0x0 value = 0x2 cat /sys/class/sound/hwC1D1/init_pin_configs 0x0b 0x01014010 0x0c 0x014580f0 0x0d 0x014570f0 0x0e 0x01c530f0 0x0f 0x0221401f 0x10 0x02216011 0x11 0x02012014 0x12 0x37a791f0 0x13 0x908700f0 0x18 0x500000f0 Pin 0x0b (Green Line Out, Rear side): present = Yes Pin 0x0c (Purple SPDIF Out, Rear side): present = No Pin 0x0d (Yellow SPDIF Out, Rear side): present = No Pin 0x0e (Blue SPDIF In, Rear side): present = Yes Pin 0x0f (Green Headphone, Front side): present = No Pin 0x10 (Orange Headphone, Front side): present = No Pin 0x11 (Grey Line Out, Front side): present = Yes Pin 0x12 (Pink Mic, Mobile-In): present = Yes Pin 0x13 (Internal Line In): present = No Pin 0x18 (Not connected): present = No
i should sell this card it's dead end anyway
1102:0023 works fine(all ports) with freebsd 11 but only generic hda driver supported
verbose info with pin config from freebsd hdacc0: <Creative CA0132 HDA CODEC> at cad 1 on hdac0 hdaa0: <Creative CA0132 Audio Function Group> at nid 1 on hdacc0 hdaa0: Subsystem ID: 0x11020023 hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 hdaa0: Original pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 11 410140f0 15 0 Line-out None 1/8 Rear Green 0 hdaa0: 12 014520f0 15 0 SPDIF-out Jack Optical Rear Grey 0 hdaa0: 13 010170f0 15 0 Line-out Jack 1/8 Rear Yellow 0 hdaa0: 14 01c510f0 15 0 SPDIF-in Jack Optical Rear Black 0 hdaa0: 15 412000f0 15 0 Headphones None Unknown Rear Unknown 0 hdaa0: 16 022140f0 15 0 Headphones Jack 1/8 Front Green 0 hdaa0: 17 418120f0 15 0 Line-in None 1/8 Rear Grey 0 hdaa0: 18 01a190f0 15 0 Mic Jack 1/8 Rear Pink 0 hdaa0: 19 50d000f0 15 0 Digital-in None Unknown Internal Unknown 0 hdaa0: 24 500000f0 15 0 Line-out None Unknown Internal Unknown 0 hdaa0: Patched pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 11 410140f0 15 0 Line-out None 1/8 Rear Green 0 DISA hdaa0: 12 014520f0 15 0 SPDIF-out Jack Optical Rear Grey 0 hdaa0: 13 010170f0 15 0 Line-out Jack 1/8 Rear Yellow 0 hdaa0: 14 01c510f0 15 0 SPDIF-in Jack Optical Rear Black 0 hdaa0: 15 412000f0 15 0 Headphones None Unknown Rear Unknown 0 DISA hdaa0: 16 022140f0 15 0 Headphones Jack 1/8 Front Green 0 hdaa0: 17 418120f0 15 0 Line-in None 1/8 Rear Grey 0 DISA hdaa0: 18 01a190f0 15 0 Mic Jack 1/8 Rear Pink 0 hdaa0: 19 50d000f0 15 0 Digital-in None Unknown Internal Unknown 0 DISA hdaa0: 24 500000f0 15 0 Line-out None Unknown Internal Unknown 0 DISA hdaa0: 5 associations found: hdaa0: Association 0 (15) out: hdaa0: Pin nid=12 seq=0 hdaa0: Association 1 (15) out: hdaa0: Pin nid=13 seq=0 hdaa0: Association 2 (15) in: hdaa0: Pin nid=14 seq=0 hdaa0: Association 3 (15) out: hdaa0: Pin nid=16 seq=0 hdaa0: Association 4 (15) in: hdaa0: Pin nid=18 seq=0 hdaa0: Tracing association 0 (15) hdaa0: Pin 12 traced to DAC 5 hdaa0: Association 0 (15) trace succeeded hdaa0: Tracing association 1 (15) hdaa0: Pin 13 traced to DAC 6 hdaa0: Association 1 (15) trace succeeded hdaa0: Tracing association 2 (15) hdaa0: Unable to trace pin 14 to ADC 7, undo traces hdaa0: Unable to trace pin 14 to ADC 8, undo traces hdaa0: Pin 14 traced to ADC 9 hdaa0: Association 2 (15) trace succeeded hdaa0: Tracing association 3 (15) hdaa0: Pin 16 traced to DAC 3 hdaa0: Association 3 (15) trace succeeded hdaa0: Tracing association 4 (15) hdaa0: Pin 18 traced to ADC 7 hdaa0: Association 4 (15) trace succeeded hdaa0: Looking for additional DAC for association 0 (15) hdaa0: Looking for additional DAC for association 1 (15) hdaa0: Looking for additional ADC for association 2 (15) hdaa0: Looking for additional DAC for association 3 (15) hdaa0: Looking for additional ADC for association 4 (15) hdaa0: Tracing input monitor hdaa0: Tracing other input monitors hdaa0: Tracing nid 14 to out hdaa0: Tracing nid 18 to out hdaa0: Tracing beeper hdaa0: Pin sense: nid=16 sense=0x80000000 (connected) hdaa0: Pin sense: nid=18 sense=0x80000000 (connected) hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm0: <Creative CA0132 (Rear Digital)> at nid 12 and 14 on hdaa0 pcm0: Playback: pcm0: Stream cap: 0x00000005 AC3 PCM pcm0: PCM cap: 0x000a01e0 16 24 bits, 44 48 88 96 KHz pcm0: DAC: 5 pcm0: pcm0: nid=12 [pin: SPDIF-out (Grey Jack)] pcm0: + <- nid=5 [audio output] [src: pcm] pcm0: pcm0: Record: pcm0: Stream cap: 0x00000005 AC3 PCM pcm0: PCM cap: 0x000a01f0 16 24 bits, 32 44 48 88 96 KHz pcm0: ADC: 9 pcm0: pcm0: nid=9 [audio input] pcm0: + <- nid=14 [pin: SPDIF-in (Black Jack)] [src: dig1] pcm0: pcm0: Speaker/Beep Volume (OSS: speaker): -46/0dB pcm0: +- ctl 5 (nid 20 out): -46/0dB (32 steps) + mute pcm0: pcm0: Mixer "vol" -> "none": child=0x00000010 pcm0: Mixer "pcm": parent="vol" pcm0: Mixer "speaker": pcm0: Soft PCM mixer ENABLED pcm0: Playback channel set is: Front Left, Front Right, pcm0: Playback channel matrix is: 2.0 (unknown) pcm0: Automatically set rec source to: dig1 pcm0: Recording channel set is: Front Left, Front Right, pcm0: Recording channel matrix is: 2.0 (unknown) random: harvesting attach, 8 bytes (4 bits) from pcm0 pcm1: <Creative CA0132 (Rear Analog)> at nid 13 and 18 on hdaa0 pcm1: Playback: pcm1: Stream cap: 0x00000001 PCM pcm1: PCM cap: 0x000a05e0 16 24 bits, 44 48 88 96 192 KHz pcm1: DAC: 6 pcm1: pcm1: nid=13 [pin: Line-out (Yellow Jack)] pcm1: + <- nid=6 [audio output] [src: pcm] pcm1: pcm1: Record: pcm1: Stream cap: 0x00000001 PCM pcm1: PCM cap: 0x000a01e4 16 24 bits, 16 44 48 88 96 KHz pcm1: ADC: 7 pcm1: pcm1: nid=7 [audio input] pcm1: + <- nid=18 [pin: Mic (Pink Jack)] [src: mic] pcm1: pcm1: Microphone Volume (OSS: mic): 0/30dB pcm1: +- ctl 1 (nid 7 in 0): 0/23dB (24 steps) pcm1: +- ctl 4 (nid 18 out): 0/30dB (4 steps) pcm1: pcm1: Recording Level (OSS: rec): 0/23dB pcm1: +- ctl 1 (nid 7 in 0): 0/23dB (24 steps) pcm1: +- ctl 4 (nid 18 out): 0/30dB (4 steps) pcm1: pcm1: Mixer "vol" -> "none": child=0x00000010 pcm1: Mixer "pcm": parent="vol" pcm1: Mixer "mic": pcm1: Mixer "rec": pcm1: Soft PCM mixer ENABLED pcm1: Playback channel set is: Front Left, Front Right, pcm1: Playback channel matrix is: 2.0 (disconnected) pcm1: Automatically set rec source to: mic pcm1: Recording channel set is: Front Left, Front Right, pcm1: Recording channel matrix is: 2.0 (connected) random: harvesting attach, 8 bytes (4 bits) from pcm1 pcm2: <Creative CA0132 (Front Analog Headphones)> at nid 16 on hdaa0 pcm2: Playback: pcm2: Stream cap: 0x00000001 PCM pcm2: PCM cap: 0x000a05e4 16 24 bits, 16 44 48 88 96 192 KHz pcm2: DAC: 3 pcm2: pcm2: nid=16 [pin: Headphones (Green Jack)] pcm2: + <- nid=3 [audio output] [src: pcm] pcm2: pcm2: Mixer "vol" -> "none": child=0x00000010 pcm2: Mixer "pcm": parent="vol" pcm2: Soft PCM mixer ENABLED pcm2: Playback channel set is: Front Left, Front Right, pcm2: Playback channel matrix is: 2.0 (connected) random: harvesting attach, 8 bytes (4 bits) from pcm2
Pin configs from windowz registry and they are same as freebsd configs that's all for now stay tune :) NID: 11 Node: 0x0b Pin: 0x410140f0 Verb 00B71CF0 00B71D40 00B71E01 00B71F41 NID: 12 Node: 0x0c Pin: 0x014520f0 Verb 00C71CF0 00C71D20 00C71E45 00C71F01 NID: 13 Node: 0x0d Pin: 0x010171f0 Verb 00D71CF0 00D71D71 00D71E01 00D71F01 NID: 14 Node: 0x0e Pin: 0x01c510f0 Verb 00E71CF0 00E71D10 00E71EC5 00E71F01 NID: 15 Node: 0x0f Pin: 0x412000f0 Verb 00F71CF0 00F71D00 00F71E20 00F71F41 NID: 16 Node: 0x10 Pin: 0x022140f0 Verb 01071CF0 01071D40 01071E21 01071F02 NID: 17 Node: 0x11 Pin: 0x418120f0 Verb 01171CF0 01171D20 01171E81 01171F41 NID: 18 Node:0x12 Pin:0x01a190f0 Verb 01271CF0 01271D90 01271EA1 01271F01 NID: 19 Node:0x13 Pin:0x50d000f0 Verb 01371CF0 01371D00 01371ED0 01371F50 NID: 24 Node:0x18 Pin:0x500000f0 Verb 01871CF0 01871D00 01871E00 01871F50
little digging with hd audio utility from windows side i found some widget controls and they were enabled with windows driver so i tried one by one or all of them I got sound from rear but it was static noise in loud :) hda-verb /dev/snd/hwC1D1 0x0b SET_PIN_WIDGET_CONTROL 0x40 > Out Enable hda-verb /dev/snd/hwC1D1 0x10 SET_PIN_WIDGET_CONTROL 0xc0 > Out Enable/H-phone enable hda-verb /dev/snd/hwC1D1 0x0f SET_PIN_WIDGET_CONTROL 0x00 > it's enabled with 0x40 connected with front panel jack this is for disable hda-verb /dev/snd/hwC1D1 0x11 SET_PIN_WIDGET_CONTROL 0x44 > Out Enable hda-verb /dev/snd/hwC1D1 0x15 SET_PIN_WIDGET_CONTROL 0xe7 > In enable/Out enable/H-phone out enable #!/bin/bash CA0132fs=/sys/devices/virtual/sound/hdaudioC0D1/hwC1D1 echo "0x0b 0x410140f0" > $CA0132fs/user_pin_configs echo "0x0c 0x014520f0" > $CA0132fs/user_pin_configs echo "0x0d 0x010170f0" > $CA0132fs/user_pin_configs echo "0x0e 0x01c510f0" > $CA0132fs/user_pin_configs echo "0x0f 0x412000f0" > $CA0132fs/user_pin_configs echo "0x10 0x022140f0" > $CA0132fs/user_pin_configs echo "0x11 0x418120f0" > $CA0132fs/user_pin_configs echo "0x12 0x01a190f0" > $CA0132fs/user_pin_configs echo "0x13 0x50d000f0" > $CA0132fs/user_pin_configs echo "0x18 0x500000f0" > $CA0132fs/user_pin_configs echo 1 > $CA0132fs/reconfig
@Takashi Iwai Hi, I suppose so this card won't work anytime soon with linux am i right ?
Created attachment 222411 [details] alsa-info with generic driver with generic module pin configs correctly detected as windows/freebsd driver but no sound both sides
I have the same problem, 1102:0023.
Hey! I am in the early stages of fixing this problem. I have this exact card, and have managed to get audio working along with the DSP by reverse engineering the Windows driver. I am in the final stages of making it work, and could definitely use help from anyone who is knowledgeable in how ALSA sets up it's streams when the driver begins. Currently, it starts the Mic stream first, which messes things up. However, I do have a early working driver if anyone wants to test it out. https://drive.google.com/open?id=1r-X8g6It5AO7SwgJc1JQfJ8KCOyqrr_d has both the patch_ca0132.c file and the firmware file. To make this work, you'll need to compile your own kernel, and put the ctefx.bin file in your /lib/firmware folder, replacing the original. To get it to work, after Linux has started up, enable the HP/Speaker Autodetect in alsamixer, and audio should work. All that works so far is rear line out and rear headphone. I'm in progress of making the inputs work and making the front headphone work, and from there I'll try to get Dolby Live and stuff working. This is going a little bit slow for me as I'm working on my own, and this is my first time doing anything of this magnitude. I tried sending an email to the kernel mailing list, but got no response, so I'm guessing I worded my email improperly or something. Anyways, if anyone who has more knowledge than me could help me out, that'd be great. Shoot me an email. Thanks.
(In reply to Connor M from comment #9) > Hey! I am in the early stages of fixing this problem. Hello and big thanks for patch. Only last version of 1st april will get work my Sound Blaster Z 1102:0010
Do someone has any new information or done progress in solving this problem? I bought this soundcard, installed it and have no problems in Windows, but in Linux (Mint 18.3 64-bit | Kernel 4.13.0-41 generic) the card shows up (alsa) but I doesn't get any sound.
It works for many people, although it requires compiling your own kernel. Just today it was put into the linux-next branch, so it may be released on the next kernel release. I don't know enough about it to know how it works. If you want to have it now though, you should download "patch_ca0132.c" from the drive link I posted in an earlier comment, put that in your *kernel_source*/sound/pci/hda, and put the ctefx-sbz.bin firmware file into your main /lib/firmware folder. You'll have to compile your own kernel though. There are many guides on doing so.