Subject : Regression: USB/DVB 184.108.40.206 --> 220.127.116.11
Submitter : David <firstname.lastname@example.org>
Date : 2008-11-14 20:20
References : http://marc.info/?l=linux-kernel&m=122669568022274&w=4
This entry is being used for tracking a regression from 2.6.26. Please don't
close it until the problem is fixed in the mainline.
Still an issue as of 2.6.29-rc1
[ 3474.716013] usb 2-8: new high speed USB device using ehci_hcd and address 6
[ 3474.848594] usb 2-8: configuration #1 chosen from 1 choice
[ 3475.068687] dvb-usb: found a 'Technotrend TT-connect S-2400' in cold state, will try to load a firmware
[ 3475.068693] usb 2-8: firmware: requesting dvb-usb-tt-s2400-01.fw
[ 3475.109489] dvb-usb: downloading firmware from file 'dvb-usb-tt-s2400-01.fw'
[ 3475.170881] usbcore: registered new interface driver dvb_usb_ttusb2
[ 3475.176529] usb 2-8: USB disconnect, address 6
[ 3475.180568] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[ 3476.932014] usb 2-8: new high speed USB device using ehci_hcd and address 7
[ 3477.064905] usb 2-8: configuration #1 chosen from 1 choice
[ 3477.065039] dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
[ 3477.065826] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3477.065997] DVB: registering new adapter (Technotrend TT-connect S-2400)
[ 3477.075242] DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)...
[ 3479.077654] dvb-usb: recv bulk message failed: -110
[ 3479.077661] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0)
[ 3479.077899] dvb-usb: Technotrend TT-connect S-2400 successfully initialized and connected.
Is this still a problem in 2.6.29-rc1 ?
No response - closing