Created attachment 204311 [details] alsa-info.txt $ uname -r 4.4.2-300.fc23.x86_64+debug $ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06) 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) 00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06) 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d4) 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4) 00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d4) 00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04) 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) 03:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) 05:00.0 Audio device [0403]: Creative Labs SB Recon3D [1102:0012] (rev 01) 1. When select "Analog Output - SB Recon3D" in Pulse Audio Audio panel not have sound from analog output (RCA) and headphone output (Jack 6.3). 2. When select "Microphone - SB Recon3D" not see signal from Accessible Audio Control Module which plugged to sound card.
3.615364] snd_hda_codec_ca0132 hdaudioC2D1: autoconfig for CA0132: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 3.615368] snd_hda_codec_ca0132 hdaudioC2D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.615370] snd_hda_codec_ca0132 hdaudioC2D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.615372] snd_hda_codec_ca0132 hdaudioC2D1: mono: mono_out=0x0 [ 3.615374] snd_hda_codec_ca0132 hdaudioC2D1: inputs: [ 3.615376] snd_hda_codec_ca0132 hdaudioC2D1: Mic=0x12 [ 3.621740] snd_hda_intel 0000:05:00.0: Direct firmware load for ctefx.bin failed with error -2
http://www.alsa-project.org/db/?f=3948b26d89d5a52b285e6ae468e36942ea7e2ad8 Also got no sound, no matter what I do, shouldn't this be fixed by this: https://bugzilla.kernel.org/show_bug.cgi?id=55541?
[ 3.621740] snd_hda_intel 0000:05:00.0: Direct firmware load for ctefx.bin failed with error -2
seem have two ca0132 codecs Codec: Creative CA0132 Address: 1 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x11020011 Subsystem Id: 0x11020033 Revision Id: 0x100918 Codec: Creative Generic Address: 2 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x11020011 Subsystem Id: 0x1102003f Revision Id: 0x100918 the druver create duplicate controls 4.734996] snd_hda_intel 0000:02:00.0: control 2:0:0:Master Playback Volume:0 is already present [ 4.735001] snd_hda_intel 0000:02:00.0: control 2:0:0:Master Playback Switch:0 is already present [ 4.735003] snd_hda_intel 0000:02:00.0: control 2:0:0:Capture Volume:0 is already present [ 4.735004] snd_hda_intel 0000:02:00.0: control 2:0:0:Capture Switch:0 is already present [ 4.735005] snd_hda_intel 0000:02:00.0: control 2:0:0:Analog-Mic2 Capture Volume:0 is already present [ 4.735007] snd_hda_intel 0000:02:00.0: control 2:0:0:Analog-Mic2 Capture Switch:0 is already present [ 4.735008] snd_hda_intel 0000:02:00.0: control 2:0:0:What U Hear Capture Volume:0 is already present [ 4.735009] snd_hda_intel 0000:02:00.0: control 2:0:0:What U Hear Capture Switch:0 is already present [ 4.735011] snd_hda_intel 0000:02:00.0: control 2:0:0:Mic1-Boost (30dB) Capture Switch:0 is already present [ 4.735012] snd_hda_intel 0000:02:00.0: control 2:0:0:HP/Speaker Playback Switch:0 is already present [ 4.735013] snd_hda_intel 0000:02:00.0: control 2:0:0:AMic1/DMic Capture Switch:0 is already present [ 4.735015] snd_hda_intel 0000:02:00.0: control 2:0:0:HP/Speaker Auto Detect Playback Switch:0 is already present [ 4.735016] snd_hda_intel 0000:02:00.0: control 2:0:0:AMic1/DMic Auto Detect Capture Switch:0 is already present [ 4.735017] snd_hda_intel 0000:02:00.0: control 2:0:0:Surround Playback Switch:0 is already present
try disconect the daugther board to find our which ca0132 is on the main sound card you need to modify driver to ignore those analog pin on the daugther board
https://bugzilla.kernel.org/show_bug.cgi?id=115641
(In reply to Raymond from comment #5) > try disconect the daugther board to find our which ca0132 is on the main > sound card Don't understand. I am not installed daugther board in my system.
http://support.creative.com/kb/ShowArticle.aspx?sid=112337 As there are two ca0132 codecs detected , you have to specify probe_mask to probe one of them but not both
As two ca0132 codecs have different subsystem id, it is possible to only enable analog pin on one and the digital pin on the other codec Subsystem Id: 0x11020033 Revision Id: 0x100918 Subsystem Id: 0x1102003f Revision Id: 0x100918
Output with disconnected daughter board: http://www.alsa-project.org/db/?f=faf934a02535b47660c4785efe2011f543655677
And my output with disconnected daughter board http://www.alsa-project.org/db/?f=1396d5e7096b9cae4500dd37c801ee218d015a72
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/sound/pci/hda/patch_ca0132.c you need to define two macro for zxr and daugtherboard #define is_zxr() (codec->subsystem_id == 0x11020033) #define is_daughterboard() (codec->subsystem_id == 0x1102003f) static int ca0132_build_controls(struct hda_codec *codec) {{ ... + +if (!is_daugtherboard()) { ... /* build those analog controls) */ ... *} + if (is_zxr()) + return; if (spec->dig_out) { err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out, spec->dig_out); if (err < 0) return err; err = snd_hda_create_spdif_share_sw(codec, &spec->multiout); if (err < 0) return err; /* spec->multiout.share_spdif = 1; */ } if (spec->dig_in) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); if (err < 0) return err; } } static int ca0132_build_pcms(struct hda_codec *codec) } + +if (!is_daugtherboard()) { ... /* build those analog pcms */ ... *} - if (!spec->dig_out && !spec->dig_in) + if ((!spec->dig_out && !spec->dig_in) || is_zxr()) return 0; } {
static int ca0132_build_controls(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; int i, num_fx; int err = 0; + if (is_daughterboard()) + goto skip_analog_controls; /* Add Mixer controls */ for (i = 0; i < spec->num_mixers; i++) { err = snd_hda_add_new_ctls(codec, spec->mixers[i]); if (err < 0) return err; } /* Add in and out effects controls. * VoiceFX, PE and CrystalVoice are added separately. */ num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; for (i = 0; i < num_fx; i++) { err = add_fx_switch(codec, ca0132_effects[i].nid, ca0132_effects[i].name, ca0132_effects[i].direct); if (err < 0) return err; } err = add_fx_switch(codec, PLAY_ENHANCEMENT, "PlayEnhancement", 0); if (err < 0) return err; err = add_fx_switch(codec, CRYSTAL_VOICE, "CrystalVoice", 1); if (err < 0) return err; add_voicefx(codec); #ifdef ENABLE_TUNING_CONTROLS add_tuning_ctls(codec); #endif +skip_analog_controls: + /* need hack so that only create analog jack detection kctls for zxr and digital jack kctls for daughterboard */ err = snd_hda_jack_add_kctls(codec, &spec->autocfg); if (err < 0) return err; + if (zxr()) + return 0; if (spec->dig_out) { err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out, spec->dig_out); if (err < 0) return err; err = snd_hda_create_spdif_share_sw(codec, &spec->multiout); if (err < 0) return err; /* spec->multiout.share_spdif = 1; */ } if (spec->dig_in) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); if (err < 0) return err; } return 0; }
do those TRS jacks can be detected or not ? I guess those RCA jacks (Lime ut and Aux in) does not support jack dectection hdajacksensetest -a
struct auto_pin_cfg temp_cfg; skip_analog_controls: memcpy(&temp_cfg, &spec->autocfg, sizeof(struct auto_pin_cfg)); switch(codec->core.subsystem_id){ case 0x11020033: err = snd_hda_jack_add_kctls(codec, &spec->autocfg); if (err < 0) return err;
struct auto_pin_cfg temp_cfg; skip_analog_controls: switch(codec->core.subsystem_id){ case 0x11020033: memcpy(&temp_cfg, &spec->autocfg, sizeof(struct auto_pin_cfg)); spec->autocfg.dig_outs = 0; spec->autocfg.dig_in_pin = 0; break; case 0x1102003f: memcpy(&temp_cfg, &spec->autocfg, sizeof(struct auto_pin_cfg)); spec->autocfg.num_inputs = 0; spec->autocfg.line_outs = 0; spec->autocfg.speaker_outs = 0; spec->autocfg.hp_outs = 0; break; }; err = snd_hda_jack_add_kctls(codec, &spec->autocfg); if (err < 0) return err; switch(codec->core.subsystem_id){ case 0x11020033: case 0x1102003f: memcpy(&spec->autocfg, &temp_cfg, sizeof(struct auto_pin_cfg)); break; };
# hdajacksensetest -a Pin 0x05 ( Digital Out, HDMI): present = Yes Pin 0x06 ( Digital Out, HDMI): present = No Pin 0x07 ( Digital Out, HDMI): present = No
you have to specify card number if your ca0106 is not card 0 [ 2.624712] snd_hda_intel 0000:05:00.0: Direct firmware load for ctefx.bin failed with error -2 do you install firmware ? [ 2.878946] snd_hda_codec_ca0132 hdaudioC1D1: ca0132 DSP downloaded and running do windows driver use two different firmware for the two codecs ?
(In reply to Raymond from comment #16) > struct auto_pin_cfg temp_cfg; > > > > skip_analog_controls: > > switch(codec->core.subsystem_id){ > case 0x11020033: > memcpy(&temp_cfg, &spec->autocfg, sizeof(struct auto_pin_cfg)); > spec->autocfg.dig_outs = 0; > spec->autocfg.dig_in_pin = 0; > break; > case 0x1102003f: > memcpy(&temp_cfg, &spec->autocfg, sizeof(struct auto_pin_cfg)); > spec->autocfg.num_inputs = 0; > spec->autocfg.line_outs = 0; > spec->autocfg.speaker_outs = 0; > spec->autocfg.hp_outs = 0; > break; > }; > err = snd_hda_jack_add_kctls(codec, &spec->autocfg); > if (err < 0) > return err; > > switch(codec->core.subsystem_id){ > case 0x11020033: > case 0x1102003f: > memcpy(&spec->autocfg, &temp_cfg, sizeof(struct > auto_pin_cfg)); > break; > }; Is it working for you with the snippets you posted? (if so, could you upload a complete patch file so I can test it?)
git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/Documentation/sound/alsa/ALSA-Configuration.txt You can specify probe_mask=1 or probe_mask=2 to load only one ca0132 to find out whether analog and digital work on different codec http://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_ca0132.c?id=fe14f39e88c8ac16d0a051f8444a2294f8cb358c Your pins seem different from those chrome pixel and alienware
/sys/class/sound/hwC1D1/init_pin_configs: 0x0b 0x01014010 0x0c 0x014580f0 0x0d 0x014570f0 0x0e 0x01c530f0 0x0f 0x0221401f 0x10 0x02216011 0x11 0x02012014 0x12 0x37a791f0 0x13 0x908700f0 0x18 0x500000f0 /sys/class/sound/hwC1D2/init_pin_configs: 0x0b 0x01014010 0x0c 0x014580f0 0x0d 0x014570f0 0x0e 0x01c530f0 0x0f 0x0221401f 0x10 0x02216011 0x11 0x02012014 0x12 0x37a791f0 0x13 0x908700f0 0x18 0x500000f0 [ 4.741787] snd_hda_codec_generic hdaudioC1D2: autoconfig for Generic: line_outs=2 (0xb/0x11/0x0/0x0/0x0) type:line [ 4.741788] snd_hda_codec_generic hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.741789] snd_hda_codec_generic hdaudioC1D2: hp_outs=2 (0x10/0xf/0x0/0x0/0x0) [ 4.741790] snd_hda_codec_generic hdaudioC1D2: mono: mono_out=0x0 [ 4.741790] snd_hda_codec_generic hdaudioC1D2: dig-out=0xc/0xd [ 4.741791] snd_hda_codec_generic hdaudioC1D2: inputs: [ 4.741792] snd_hda_codec_generic hdaudioC1D2: Mic=0x12 [ 4.741793] snd_hda_codec_generic hdaudioC1D2: Line=0x13 [ 4.741793] snd_hda_codec_generic hdaudioC1D2: dig-in=0xe some pin complex with wcaps Digital have analog type but some pin complex wcaps withouut Digital are with SPDIF
those invalid pin should be ignored by auto parser Node 0x0d [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x014570f0: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Yellow DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x13 [Pin Complex] wcaps 0x400681: Stereo Digital Pincap 0x00000020: IN Pin Default 0x908700f0: [Fixed] Line In at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=02, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0
/sys/class/sound/hwC2D1/init_pin_configs: 0x0b 0x01014010 0x0c 0x014580f0 0x0d 0x014570f0 0x0e 0x01c530f0 0x0f 0x0221401f 0x10 0x02216011 0x11 0x02012014 0x12 0x37a791f0 0x13 0x908700f0 0x18 0x500000f0 2.620767] snd_hda_codec_ca0132 hdaudioC2D1: autoconfig for CA0132: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 2.620770] snd_hda_codec_ca0132 hdaudioC2D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.620771] snd_hda_codec_ca0132 hdaudioC2D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.620773] snd_hda_codec_ca0132 hdaudioC2D1: mono: mono_out=0x0 [ 2.620774] snd_hda_codec_ca0132 hdaudioC2D1: inputs: [ 2.620776] snd_hda_codec_ca0132 hdaudioC2D1: Mic=0x12 strange that some pins are ignored by auto parser (e.g. those digital pins 0x0d and 0x0e Node 0x0b [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x02 Node 0x0d [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x014570f0: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Yellow DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 Node 0x0f [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0000001c: OUT HP Detect Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x02 Node 0x10 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0000001c: OUT HP Detect Pin Default 0x02216011: [Jack] HP Out at Ext Front Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x00: Unsolicited: tag=01, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x03 ode 0x11 [Pin Complex] wcaps 0x40058b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02012014: [Jack] Line Out at Ext Front Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x4 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x04 Node 0x12 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Mic1-Boost (30dB) Capture Switch", index=0, device=0 ControlAmp: chs=1, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x37a791f0: [Jack] Mic at Oth Mobile-In Conn = Analog, Color = Pink DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0
you need to define QUIRK_ZXR enum { QUIRK_NONE, QUIRK_ALIENWARE, + QUIRK_ZXR, }; static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2CRET015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE), + SND_PCI_QUIRK(0x1102, 0x0010, "Creative ZXR", QUIRK_ZXR), {} }; - if (spec->quirk == QUIRK_ALIENWARE) { + switch(spec->quirk) { + case QUIRK_ZXR: codec_dbg(codec, "ca0132_config: QUIRK_ALIENWARE applied.\n"); snd_hda_apply_pincfgs(codec, alienware_pincfgs); spec->num_outputs = 2; spec->out_pins[0] = 0x0b; /* speaker out */ spec->out_pins[1] = 0x0f; spec->shared_out_nid = 0x2; spec->unsol_tag_hp = 0x0f; spec->adcs[0] = 0x7; /* digital mic / analog mic1 */ spec->adcs[1] = 0x8; /* analog mic2 */ spec->adcs[2] = 0xa; /* what u hear */ spec->num_inputs = 3; spec->input_pins[0] = 0x12; spec->input_pins[1] = 0x11; spec->input_pins[2] = 0x13; spec->shared_mic_nid = 0x7; spec->unsol_tag_amic1 = 0x11; + break; + case QUIRK_ZXR: + /* fix those nids */ + break; - } else { spec->num_outputs = 2; spec->out_pins[0] = 0x0b; /* speaker out */ spec->out_pins[1] = 0x10; /* headphone out */ spec->shared_out_nid = 0x2; spec->unsol_tag_hp = spec->out_pins[1]; spec->adcs[0] = 0x7; /* digital mic / analog mic1 */ spec->adcs[1] = 0x8; /* analog mic2 */ spec->adcs[2] = 0xa; /* what u hear */ spec->num_inputs = 3; spec->input_pins[0] = 0x12; spec->input_pins[1] = 0x11; spec->input_pins[2] = 0x13; spec->shared_mic_nid = 0x7; spec->unsol_tag_amic1 = spec->input_pins[0]; /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; cfg->dig_out_pins[0] = 0x0c; cfg->dig_outs = 1; cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; spec->dig_in = 0x09; cfg->dig_in_pin = 0x0e; cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; + break; }
how do you test since there are two controls for output which need a correct HP pin for jack detection Simple mixer control 'HP/Speaker',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'HP/Speaker Auto Detect',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off]
you need to find out hp pin and assign it to spec->unsol_tag_hp) codec_dbg(codec, "ca0132_select_out\n"); snd_hda_power_up_pm(codec); auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID]; if (auto_jack) jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_hp); else jack_present = spec->vnode_lswitch[VNID_HP_SEL - VNODE_START_NID]; if (jack_present) spec->cur_out_type = HEADPHONE_OUT; else spec->cur_out_type = SPEAKER_OUT;
Any news on this? Seems still not working on latest mainline.
mint 17.3 dont work =(
Here's a curveball for you. My card is showing up as 1102:0012: 04:00.0 Audio device [0403]: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] [1102:0012] (rev 01) But it is NOT a ZxR; it's just a base model Z. alsa-info here: http://www.alsa-project.org/db/?f=dddb02142a9eb78fdb7bb8e3c9ccfc29429678a9 New bug, or include it here?
$ sudo lspci -v 00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06) Subsystem: Gigabyte Technology Co., Ltd Device 5000 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: hsw_uncore 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device d000 Flags: bus master, fast devsel, latency 0, IRQ 29 Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features Kernel driver in use: i915 Kernel modules: i915 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 32 Memory at f7e14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04) (prog-if 30 [XHCI]) Subsystem: Gigabyte Technology Co., Ltd Device 5007 Flags: bus master, medium devsel, latency 0, IRQ 27 Memory at f7e00000 (64-bit, non-prefetchable) [size=64K] Capabilities: [70] Power Management version 2 Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 1c3a Flags: bus master, fast devsel, latency 0, IRQ 30 Memory at f7e1c000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei_me Kernel modules: mei_me 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device a002 Flags: bus master, fast devsel, latency 0, IRQ 31 Memory at f7e10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Capabilities: [40] Express Root Port (Slot-), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001 Capabilities: [a0] Power Management version 3 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 18 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7d00000-f7dfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001 Capabilities: [a0] Power Management version 3 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 19 Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001 Capabilities: [a0] Power Management version 3 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 16 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: f7c00000-f7cfffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001 Capabilities: [a0] Power Management version 3 Kernel driver in use: pcieport Kernel modules: shpchp 00:1f.0 ISA bridge: Intel Corporation Z87 Express LPC Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 5001 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd Device b005 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 26 I/O ports at f0b0 [size=8] I/O ports at f0a0 [size=4] I/O ports at f090 [size=8] I/O ports at f080 [size=4] I/O ports at f060 [size=32] Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device 5001 Flags: medium devsel, IRQ 18 Memory at f7e19000 (64-bit, non-prefetchable) [size=256] I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet Flags: bus master, fast devsel, latency 0, IRQ 28 I/O ports at e000 [size=256] Memory at f7d00000 (64-bit, non-prefetchable) [size=4K] Memory at f0000000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00 Kernel driver in use: r8169 Kernel modules: r8169 03:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0, IRQ 10 Bus: primary=03, secondary=04, subordinate=04, sec-latency=32 Capabilities: [90] Power Management version 2 Capabilities: [a0] Subsystem: Gigabyte Technology Co., Ltd Device 8892 05:00.0 Audio device: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] (rev 01) Subsystem: Creative Labs Device 0033 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f7c04000 (64-bit, non-prefetchable) [size=16K] Memory at f7c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [170] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [180] Power Budgeting <?> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel Any idea why for Creative ZxR try used snd_hda_intel driver?
Quite an old bug, can someone fix it?
$ ls -la /lib/firmware | grep ct -rw-r--r--. 1 root root 582440 июн 22 17:55 ct2fw-3.2.1.1.bin -rw-r--r--. 1 root root 583688 июн 22 17:55 ct2fw-3.2.3.0.bin -rw-r--r--. 1 root root 584216 июн 22 17:55 ct2fw-3.2.5.1.bin -rw-r--r--. 1 root root 537160 июн 22 17:55 ctfw-3.2.1.1.bin -rw-r--r--. 1 root root 538712 июн 22 17:55 ctfw-3.2.3.0.bin -rw-r--r--. 1 root root 539144 июн 22 17:55 ctfw-3.2.5.1.bin drwxr-xr-x. 2 root root 4096 июн 25 15:43 ti-connectivity -rw-r--r--. 1 root root 7614 июн 22 17:55 tr_smctr.bin