Bug 10916 - irq 19: nobody cared - unless irqpoll - HP Compaq 6910p
irq 19: nobody cared - unless irqpoll - HP Compaq 6910p
Status: REJECTED INSUFFICIENT_DATA
Product: ACPI
Classification: Unclassified
Component: Config-Interrupts
All Linux
: P1 normal
Assigned To: Zhang Rui
:
Depends on:
Blocks:
  Show dependency treegraph
 
Reported: 2008-06-15 02:12 UTC by Cijoml Cijomlovic Cijomlov
Modified: 2008-12-28 18:39 UTC (History)
3 users (show)

See Also:
Kernel Version: 2.6.24, 2.6.25.6, 2.6.27.5
Tree: Mainline
Regression: ---


Attachments
acpidump fw f13 (104.57 KB, application/octet-stream)
2008-06-16 12:15 UTC, Cijoml Cijomlovic Cijomlov
Details
dmesg -s64000 for 2.6.27-rc3 (48.17 KB, text/plain)
2008-08-17 10:05 UTC, Piotr Keplicz
Details
dmesg -s64000 for 2.6.27-rc3 with noapic (53.62 KB, text/plain)
2008-08-17 10:05 UTC, Piotr Keplicz
Details
lspci -vxxx (13.10 KB, text/plain)
2008-08-17 10:05 UTC, Piotr Keplicz
Details
lspci_-vxxx (34.13 KB, text/plain)
2008-08-20 11:35 UTC, Cijoml Cijomlovic Cijomlov
Details
dmesg_2.6.26.2-noapic (30.97 KB, text/plain)
2008-08-20 13:03 UTC, Cijoml Cijomlovic Cijomlov
Details
try the debug patch (1.08 KB, patch)
2008-08-23 07:08 UTC, ykzhao
Details | Diff

Description Cijoml Cijomlovic Cijomlov 2008-06-15 02:12:11 UTC
Latest working kernel version: unknown
Earliest failing kernel version: unknown
Distribution: Debian testing
Hardware Environment: HP Compaq 6910p
Software Environment: Debian testing
Problem Description:

irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.25.6 #2
 [<c0147527>] __report_bad_irq+0x24/0x69
 [<c014752e>] __report_bad_irq+0x2b/0x69
 [<c0147761>] note_interrupt+0x1f5/0x22c
 [<c0146d21>] handle_IRQ_event+0x1a/0x3f
 [<c0147c90>] handle_fasteoi_irq+0x66/0xad
 [<c0106212>] do_IRQ+0x6e/0x84
 [<c01045a3>] common_interrupt+0x23/0x28
 [<c01400d8>] audit_receive+0x3dd/0x8f1
 [<c0219bb7>] acpi_idle_enter_simple+0x154/0x1bd
 [<c02a30cf>] cpuidle_idle_call+0x55/0x86
 [<c02a307a>] cpuidle_idle_call+0x0/0x86
 [<c01028d2>] cpu_idle+0x8c/0xbc
 =======================
handlers:
[<c02851b6>] (yenta_interrupt+0x0/0xb7)
[<f8a0a883>] (sdhci_irq+0x0/0x4c2 [sdhci])
Disabling IRQ #19
cijoml@compaq:~$ cat /proc/interrupts
           CPU0       CPU1
  0:      13414      15858   IO-APIC-edge      timer
  1:        174         78   IO-APIC-edge      i8042
  7:          0          0   IO-APIC-edge      parport0
  8:         13         10   IO-APIC-edge      rtc
  9:        138        132   IO-APIC-fasteoi   acpi
 12:      14068      16180   IO-APIC-edge      i8042
 14:        997        549   IO-APIC-edge      ata_piix
 15:          0          0   IO-APIC-edge      ata_piix
 16:      12442        873   IO-APIC-fasteoi   uhci_hcd:usb1, i915@pci:0000:00:02.0
 17:       2028        597   IO-APIC-fasteoi   uhci_hcd:usb4, HDA Intel, iwl4965
 18:          1          1   IO-APIC-fasteoi   yenta, ehci_hcd:usb2, uhci_hcd:usb7
 19:      96623       3385   IO-APIC-fasteoi   yenta, sdhc0:slot0
 20:         15         13   IO-APIC-fasteoi   ehci_hcd:usb3, uhci_hcd:usb5, firewire_ohci
 21:       3254       2826   IO-APIC-fasteoi   ahci
 22:         75          3   IO-APIC-fasteoi   uhci_hcd:usb6, eth0
NMI:          0          0   Non-maskable interrupts
LOC:      17154      17359   Local timer interrupts
RES:       5369       5907   Rescheduling interrupts
CAL:      35696        123   function call interrupts
TLB:        617        588   TLB shootdowns
TRM:          0          0   Thermal event interrupts
SPU:          0          0   Spurious interrupts
ERR:          0
MIS:          0

append irqpoll to kernel boot params fixed problem

Steps to reproduce:

boot without irqpoll append parameter
Comment 1 Adrian Bunk 2008-06-15 03:30:23 UTC
Although it's unlikely to help please confirm that 2.6.26-rc6 still has this problem.

Please attach the output of "dmesg -s 1000000".
Comment 2 Len Brown 2008-06-15 22:24:47 UTC
Was there a previous version of Linux that did not have this problem?

please attach the output from acpidump and lspci -vv

Comment 3 Cijoml Cijomlovic Cijomlov 2008-06-16 04:25:55 UTC
Hi Len,

I tested also 2.6.24 kernel and it has same problem. I will attach dump later.

Michal
Comment 4 Cijoml Cijomlovic Cijomlov 2008-06-16 12:14:02 UTC
compaq:/usr/src/linux-2.6.25.6# lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at e4400000 (64-bit, non-prefetchable) [size=1M]
        Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 4000 [size=8]
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at e4500000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

00:03.0 Communication controller: Intel Corporation Mobile PM965/GM965 MEI Controller (rev 0c)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 255
        Region 0: Memory at e4600000 (64-bit, non-prefetchable) [size=16]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000

00:03.2 IDE interface: Intel Corporation Mobile PM965/GM965 PT IDER Controller (rev 0c) (prog-if 85 [Master SecO PriO])
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 11
        Region 0: I/O ports at 4008 [size=8]
        Region 1: I/O ports at 4010 [size=4]
        Region 2: I/O ports at 4018 [size=8]
        Region 3: I/O ports at 4020 [size=4]
        Region 4: I/O ports at 4030 [size=16]
        Capabilities: [c8] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000

00:03.3 Serial controller: Intel Corporation Mobile PM965/GM965 KT Controller (rev 0c) (prog-if 02)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at 4040 [size=8]
        Region 1: Memory at e4601000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Kernel driver in use: serial
        Kernel modules: 8250_pci

00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at e4620000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at e4640000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at 4060 [size=32]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Kernel driver in use: e1000e
        Kernel modules: e1000e

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 4080 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 40a0 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at e4641000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at e4644000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Hewlett-Packard Company Device 30be
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: e4000000-e40fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Hewlett-Packard Company Device 30be
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
        I/O behind bridge: 00002000-00003fff
        Memory behind bridge: e0000000-e3ffffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
                        Slot #  4, PowerLimit 0.160000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Hewlett-Packard Company Device 30be
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 40c0 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 22
        Region 4: I/O ports at 40e0 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 4100 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at e4648000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=07, sec-latency=32
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: e4100000-e43fffff
        Prefetchable memory behind bridge: 0000000080000000-0000000087ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Subsystem: Hewlett-Packard Company Device 30be

00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: iTCO_wdt

00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 4120 [size=16]
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix

00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03) (prog-if 01)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 21
        Region 0: I/O ports at 13f0 [size=8]
        Region 1: I/O ports at 15f4 [size=4]
        Region 2: I/O ports at 1370 [size=8]
        Region 3: I/O ports at 1574 [size=4]
        Region 4: I/O ports at 4160 [size=32]
        Region 5: Memory at e4649000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA <?>
        Kernel driver in use: ahci

02:06.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b9)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at e4100000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
        Memory window 0: 80000000-83fff000 (prefetchable)
        Memory window 1: 88000000-8bfff000
        I/O window 0: 00005000-000050ff
        I/O window 1: 00005400-000054ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus

02:06.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b9)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at e4101000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
        Memory window 0: 84000000-87fff000 (prefetchable)
        Memory window 1: 8c000000-8ffff000
        I/O window 0: 00005800-000058ff
        I/O window 1: 00005c00-00005cff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus

02:06.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 03) (prog-if 10)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 20
        Region 0: Memory at e4102000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME+
        Kernel driver in use: firewire_ohci
        Kernel modules: ohci1394, firewire-ohci

02:06.3 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 20)
        Subsystem: Hewlett-Packard Company Device 30be
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at e4103000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
        Kernel driver in use: sdhci
        Kernel modules: sdhci

02:06.4 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) (prog-if ff)
        !!! Unknown header type 7f
        Kernel driver in use: ricoh-mmc
        Kernel modules: ricoh_mmc

10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
        Subsystem: Intel Corporation Device 1101
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [c8] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
                        ClockPM+ Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: iwl4965
        Kernel modules: iwl4965
Comment 5 Cijoml Cijomlovic Cijomlov 2008-06-16 12:15:35 UTC
Created attachment 16510 [details]
acpidump fw f13

acpidump fw f13
Comment 6 Len Brown 2008-06-16 14:27:03 UTC
thanks for confirming that 2.6.24 fails like 2.6.25.
If you could verify that the latest upstream kernel - 2.6.26-rc
still fails, that would be helpful.  It it isn't too much trouble,
it would be good to know if any of the 'high volume kernels,
such as 2.6.18, or 2.6.20 pre-date this issue,
or if it has always existed.

Also, still looking for the output from dmesg -s64000

Also, please take a close look at irq19 in /proc/interrupts
and see if some sort of device activity causes it to increment.
eg. try disconnecting the network, try unloading driver for sdhc0 etc.
Comment 7 ykzhao 2008-06-17 00:21:56 UTC
Hi, Cijoml
   Will you please try the boot option of "noapic" and attach the output of dmesg?
   Please attach the output of lspci -vxxx.
   Thanks.
Comment 8 Zhang Rui 2008-08-14 00:17:34 UTC
Reject this bug because there is no response from the bug reporter.
Comment 9 Piotr Keplicz 2008-08-17 10:04:13 UTC
Please, reopen this bug. The issue is still valid on v2.6.27-rc3-414-gb09c3e3.

/proc/interrupts counters for IRQ 19 increment at a rate of 50-something every second. No devices are plugged into the PCMCIA or SD card slots.

With "noapic" the boot process stalls for 9 minutes and then resumes.
Comment 10 Piotr Keplicz 2008-08-17 10:05:02 UTC
Created attachment 17282 [details]
dmesg -s64000 for 2.6.27-rc3
Comment 11 Piotr Keplicz 2008-08-17 10:05:25 UTC
Created attachment 17283 [details]
dmesg -s64000 for 2.6.27-rc3 with noapic
Comment 12 Piotr Keplicz 2008-08-17 10:05:41 UTC
Created attachment 17284 [details]
lspci -vxxx
Comment 13 Zhang Rui 2008-08-17 18:31:01 UTC
(In reply to comment #9)
> Please, reopen this bug. The issue is still valid on v2.6.27-rc3-414-gb09c3e3.

No.
Piotr, the lspci shows that you are not using the same hardware as Cijoml's.
so these are two different problems and we should not reopen this bug report for another problem.

Please open another bug report and attach the acpidump output and the content of /proc/interrupt.
Comment 14 Piotr Keplicz 2008-08-17 23:18:27 UTC
OK, filed bug 11365.
Comment 15 Cijoml Cijomlovic Cijomlov 2008-08-18 09:43:36 UTC
Please reopen  I am at vacation will reply to you next week
Comment 16 Cijoml Cijomlovic Cijomlov 2008-08-20 11:35:31 UTC
Created attachment 17339 [details]
lspci_-vxxx

lspci -vxxx
Comment 17 Cijoml Cijomlovic Cijomlov 2008-08-20 13:03:14 UTC
Created attachment 17343 [details]
dmesg_2.6.26.2-noapic

dmesg_2.6.26.2-noapic
Comment 18 ykzhao 2008-08-23 07:08:43 UTC
Created attachment 17391 [details]
try the debug patch

Will you please try the attached debug patch and add the boot option of "irqpoll"?
After the system is booted, please wait for about three minutes and attach the output of dmesg.
Thanks.
Comment 19 Zhang Rui 2008-09-09 19:26:53 UTC
cijoml,
any updates?
Comment 20 Cijoml Cijomlovic Cijomlov 2008-09-10 22:21:37 UTC
aah sorry I forgot to test it, will do it later today! Sorry!
Comment 21 Cijoml Cijomlovic Cijomlov 2008-09-15 13:32:27 UTC
well I tried without irqpoll, but I also hit the bug :(
Comment 22 Zhang Rui 2008-09-15 20:11:30 UTC
yes. that;s just a debug patch, please attach the dmesg output after you hit the bug.
Comment 23 Zhang Rui 2008-10-31 00:14:29 UTC
ping cijoml. :)
Comment 24 Cijoml Cijomlovic Cijomlov 2008-11-10 01:35:51 UTC
output of 2.6.27.5

irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.27 #3
 [<c014a1bf>] __report_bad_irq+0x24/0x69
 [<c014a1c6>] __report_bad_irq+0x2b/0x69
 [<c014a3c8>] note_interrupt+0x1c4/0x21c
 [<c0149a70>] handle_IRQ_event+0x1a/0x3f
 [<c014a946>] handle_fasteoi_irq+0x8a/0xab
 [<c01053b7>] do_IRQ+0x69/0x7e
 [<c010374f>] common_interrupt+0x23/0x28
 [<c013007b>] posix_cpu_clock_get+0x10d/0x113
 [<c0227615>] acpi_idle_enter_simple+0x18a/0x1f8
 [<c02b6819>] menu_select+0x37/0x82
 [<c02b5a7e>] cpuidle_idle_call+0x56/0x85
 [<c0101ef3>] cpu_idle+0xc7/0xfc
 =======================
handlers:
[<c02977a1>] (yenta_interrupt+0x0/0xbd)
[<f8a2b42a>] (sdhci_irq+0x0/0x469 [sdhci])
Disabling IRQ #19
Comment 25 Cijoml Cijomlovic Cijomlov 2008-11-10 01:52:37 UTC
And with debug patch:
irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.27 #4
 [<c014a1bf>] __report_bad_irq+0x24/0x69
 [<c014a1c6>] __report_bad_irq+0x2b/0x69
 [<c014a3f4>] note_interrupt+0x1f0/0x248
 [<c0149a70>] handle_IRQ_event+0x1a/0x3f
 [<c014a972>] handle_fasteoi_irq+0x8a/0xab
 [<c01053b7>] do_IRQ+0x69/0x7e
 [<c010374f>] common_interrupt+0x23/0x28
 [<c013007b>] posix_cpu_clock_get+0x10d/0x113
 [<c0227645>] acpi_idle_enter_simple+0x18a/0x1f8
 [<c02b6849>] menu_select+0x37/0x82
 [<c02b5aae>] cpuidle_idle_call+0x56/0x85
 [<c0101ef3>] cpu_idle+0xc7/0xfc
 =======================
handlers:
[<c02977d1>] (yenta_interrupt+0x0/0xbd)
[<f8a0f42a>] (sdhci_irq+0x0/0x469 [sdhci])
Disabling IRQ #19
CE: hpet increasing min_delta_ns to 15000 nsec
Comment 26 ykzhao 2008-11-25 00:43:57 UTC
Hi, Cijoml
    Will you please attach the output of full dmesg on the 2.6.27.5 kernel?(The debug patch is required and the boot option of "irqpoll" is added).
    
    From the log in comment #24 it seems that the issue still exists even when "irqpoll" option is added.
   Will you please double check it again?
   Thanks.
Comment 27 Zhang Rui 2008-11-25 18:36:39 UTC
please ignore comment #26. :)
please apply the debug patch, try to boot both w/ and w/o boot option "irqpoll" and attach the full dmesg output.(
Comment 28 Shaohua 2008-11-25 19:01:49 UTC
Also can you just enabled one driver of yenta and sdhci, see if the same irq issue appears. This could help narrow down the issue.
Comment 29 Zhang Rui 2008-12-16 21:19:39 UTC
ping cijoml
Comment 30 Zhang Rui 2008-12-28 18:39:48 UTC
reject as no response from the bug reporter.

Note You need to log in before you can comment on or make changes to this bug.