Bug 10662 - Regression in 2.6.25: No sound after suspend-to-ram and resume (snd_hda_intel)
Regression in 2.6.25: No sound after suspend-to-ram and resume (snd_hda_intel)
Status: CLOSED CODE_FIX
Product: Drivers
Classification: Unclassified
Component: Sound(ALSA)
All Linux
: P1 normal
Assigned To: Jaroslav Kysela
:
Depends on:
Blocks: 7216 9832
  Show dependency treegraph
 
Reported: 2008-05-10 05:16 UTC by Jack Malmostoso
Modified: 2013-07-29 15:57 UTC (History)
2 users (show)

See Also:
Kernel Version: 2.6.25
Tree: Mainline
Regression: Yes


Attachments
dmidecode output (13.20 KB, text/plain)
2008-06-01 04:33 UTC, kujub
Details
alsa-info before suspend (23.85 KB, text/plain)
2008-06-03 05:06 UTC, Jack Malmostoso
Details
alsa-info after suspend (23.85 KB, text/plain)
2008-06-03 05:07 UTC, Jack Malmostoso
Details
Fix resume with auto-configuration of Realtek codecs (376 bytes, patch)
2008-06-03 05:27 UTC, Takashi Iwai
Details | Diff

Description Jack Malmostoso 2008-05-10 05:16:46 UTC
Latest working kernel version: 2.6.24
Earliest failing kernel version: 2.6.25
Distribution: Debian Sid, AMD64
Hardware Environment: Asus Z37E
Output of lspci:

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
06:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
06:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
06:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
06:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev ff)

Output of dmesg right after boot:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.25-1-amd64 (Debian 2.6.25-1) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Fri Apr 25 14:38:55 UTC 2008
[    0.000000] Command line: root=/dev/sda1 ro splash vga=791 usbcore.autosuspend=1 vga=775 splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[    0.000000]  BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000FB0D0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 7F7A0000, 003C (r1 A_M_I_ OEMRSDT  11000719 MSFT       97)
[    0.000000] ACPI: FACP 7F7A0200, 0084 (r2 A_M_I_ OEMFACP  11000719 MSFT       97)
[    0.000000] ACPI: DSDT 7F7A05B0, 6FD8 (r1  A0813 A0813000        0 INTL 20060113)
[    0.000000] ACPI: FACS 7F7AE000, 0040
[    0.000000] ACPI: APIC 7F7A0390, 005C (r1 A_M_I_ OEMAPIC  11000719 MSFT       97)
[    0.000000] ACPI: MCFG 7F7A03F0, 003C (r1 A_M_I_ OEMMCFG  11000719 MSFT       97)
[    0.000000] ACPI: OEMB 7F7AE040, 0061 (r1 A_M_I_ AMI_OEM  11000719 MSFT       97)
[    0.000000] ACPI: HPET 7F7A7590, 0038 (r1 A_M_I_ OEMHPET  11000719 MSFT       97)
[    0.000000] ACPI: GSCI 7F7AE0B0, 2024 (r1 A_M_I_ GMCHSCI  11000719 MSFT       97)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007f7a0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000007f7a0000
[    0.000000]   NODE_DATA [000000000000c000 - 0000000000012fff]
[    0.000000]   bootmap [0000000000013000 -  0000000000022ef7] pages 10
[    0.000000] early res: 0 [0-fff] BIOS data page
[    0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[    0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS
[    0.000000] early res: 3 [37a3d000-37fefa49] RAMDISK
[    0.000000] early res: 4 [9fc00-a0bff] EBDA
[    0.000000] early res: 5 [8000-bfff] PGTABLE
[    0.000000]  [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[    0.000000]  [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[    0.000000]  [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[    0.000000]  [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[    0.000000]  [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[    0.000000]  [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[    0.000000]  [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[    0.000000]  [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[    0.000000]  [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[    0.000000]  [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[    0.000000]  [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[    0.000000]  [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[    0.000000]  [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[    0.000000]  [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   522144
[    0.000000] On node 0 totalpages: 522047
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1095 pages reserved
[    0.000000]   DMA zone: 2848 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7082 pages used for memmap
[    0.000000]   DMA32 zone: 510966 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513814
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda1 ro splash vga=791 usbcore.autosuspend=1 vga=775 splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000001] time.c: Detected 2194.500 MHz processor.
[    0.000022] Console: colour dummy device 80x25
[    0.000024] console [tty0] enabled
[    0.000153] Checking aperture...
[    0.000162] Calgary: detecting Calgary via BIOS EBDA area
[    0.000164] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.004000] Memory: 2049028k/2088576k available (2183k kernel code, 39160k reserved, 1013k data, 372k init)
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] hpet clockevent registered
[    0.080007] Calibrating delay using timer specific routine.. 4392.46 BogoMIPS (lpj=8784930)
[    0.080053] Security Framework initialized
[    0.080060] SELinux:  Disabled at boot.
[    0.080064] Capability LSM initialized
[    0.080270] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.081440] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.082039] Mount-cache hash table entries: 256
[    0.082190] Initializing cgroup subsys ns
[    0.082196] Initializing cgroup subsys cpuacct
[    0.082216] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.082220] CPU: L2 cache: 4096K
[    0.082224] CPU 0/0 -> Node 0
[    0.082227] CPU: Physical Processor ID: 0
[    0.082229] CPU: Processor Core ID: 0
[    0.082237] CPU0: Thermal monitoring enabled (TM2)
[    0.082240] using mwait in idle threads.
[    0.083071] ACPI: Core revision 20070126
[    0.136896] Using local APIC timer interrupts.
[    0.140009] APIC timer calibration result 12468767
[    0.140011] Detected 12.468 MHz APIC timer.
[    0.140164] Booting processor 1/2 APIC 0x1
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 4389.05 BogoMIPS (lpj=8778118)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 4096K
[    0.004000] CPU 1/1 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.004000] Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
[    0.228581] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.232045] Brought up 2 CPUs
[    0.232129] CPU0 attaching sched-domain:
[    0.232132]  domain 0: span 00000003
[    0.232133]   groups: 00000001 00000002
[    0.232136]   domain 1: span 00000003
[    0.232138]    groups: 00000003
[    0.232140] CPU1 attaching sched-domain:
[    0.232141]  domain 0: span 00000003
[    0.232143]   groups: 00000002 00000001
[    0.232145]   domain 1: span 00000003
[    0.232146]    groups: 00000003
[    0.232396] net_namespace: 1016 bytes
[    0.232402] Booting paravirtualized kernel on bare hardware
[    0.232582] NET: Registered protocol family 16
[    0.232758] ACPI: bus type pci registered
[    0.232836] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[    0.232840] PCI: Not using MMCONFIG.
[    0.232843] PCI: Using configuration type 1
[    0.236651] ACPI: EC: Look up EC in DSDT
[    0.344365] ACPI: Interpreter enabled
[    0.344369] ACPI: (supports S0 S1 S3 S4 S5)
[    0.344389] ACPI: Using IOAPIC for interrupt routing
[    0.117888] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.126463] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.126467] ACPI: EC: driver started in interrupt mode
[    0.126569] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.127295] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.127301] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.128207] PCI: Transparent bridge - 0000:00:1e.0
[    0.128242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.128425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.128531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.128632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.128730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.128828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.183232] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.183363] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.183492] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.183620] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.183749] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.183878] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.184006] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.184148] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.184972] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.185000] pnp: PnP ACPI init
[    0.185008] ACPI: bus type pnp registered
[    0.185174] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.185187]  00:01: calling quirk 0xffffffff8035b6d2: quirk_system_pci_resources+0x0/0x173()
[    0.185231] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.185282] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.185331] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.185424] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.185516] pnp 00:05: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0a04 SYN0002 PNP0f13 (active)
[    0.185561] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.185608] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.185765]  00:08: calling quirk 0xffffffff8035b6d2: quirk_system_pci_resources+0x0/0x173()
[    0.185812] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185989] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.186085]  00:0a: calling quirk 0xffffffff8035b6d2: quirk_system_pci_resources+0x0/0x173()
[    0.186132] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.186240]  00:0b: calling quirk 0xffffffff8035b6d2: quirk_system_pci_resources+0x0/0x173()
[    0.186286] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.416894]  00:0c: calling quirk 0xffffffff8035b6d2: quirk_system_pci_resources+0x0/0x173()
[    0.416948] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.417286] pnp: PnP ACPI: found 13 devices
[    0.417289] ACPI: ACPI bus type pnp unregistered
[    0.417457] usbcore: registered new interface driver usbfs
[    0.417509] usbcore: registered new interface driver hub
[    0.417547] usbcore: registered new device driver usb
[    0.417670] PCI: Using ACPI for IRQ routing
[    0.417674] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.436059] PCI-GART: No AMD northbridge found.
[    0.436065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.436070] hpet0: 3 64-bit timers, 14318180 Hz
[    0.437101] ACPI: RTC can wake from S4
[    0.452043] pnp: the driver 'system' has been registered
[    0.452051] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.452055] system 00:01: driver attached
[    0.452062] system 00:08: ioport range 0x25c-0x25f has been reserved
[    0.452066] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.452070] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.452074] system 00:08: ioport range 0x500-0x53f has been reserved
[    0.452080] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.452084] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.452088] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[    0.452092] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.452096] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.452101] system 00:08: driver attached
[    0.452106] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.452111] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.452115] system 00:0a: driver attached
[    0.452119] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.452123] system 00:0b: driver attached
[    0.452127] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.452131] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.452136] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.452140] system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
[    0.452145] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
[    0.452149] system 00:0c: driver attached
[    0.452491] PCI: Bridge: 0000:00:1c.0
[    0.452495]   IO window: e000-efff
[    0.452501]   MEM window: 0xf8000000-0xfbefffff
[    0.452506]   PREFETCH window: 0x00000000f0000000-0x00000000f6ffffff
[    0.452513] PCI: Bridge: 0000:00:1c.2
[    0.452515]   IO window: disabled.
[    0.452520]   MEM window: 0xf7f00000-0xf7ffffff
[    0.452525]   PREFETCH window: disabled.
[    0.452531] PCI: Bridge: 0000:00:1c.3
[    0.452534]   IO window: d000-dfff
[    0.452540]   MEM window: 0xf7e00000-0xf7efffff
[    0.452544]   PREFETCH window: disabled.
[    0.452550] PCI: Bridge: 0000:00:1c.4
[    0.452554]   IO window: c000-cfff
[    0.452559]   MEM window: 0xf7d00000-0xf7dfffff
[    0.452563]   PREFETCH window: disabled.
[    0.452570] PCI: Bridge: 0000:00:1e.0
[    0.452572]   IO window: disabled.
[    0.452577]   MEM window: 0xfbf00000-0xfbffffff
[    0.452581]   PREFETCH window: disabled.
[    0.452605] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.452612] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.452628] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.452635] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.452651] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[    0.452657] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.452672] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[    0.452679] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[    0.452688] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.452712] NET: Registered protocol family 2
[    0.488134] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.488779] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.490293] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.490825] TCP: Hash tables configured (established 262144 bind 65536)
[    0.490829] TCP reno registered
[    0.500223] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    0.504045] Switched to high resolution mode on CPU 0
[    0.717971]  it is
[    0.950510] Freeing initrd memory: 5834k freed
[    0.728656] audit: initializing netlink socket (disabled)
[    0.728679] type=2000 audit(1210420467.952:1): initialized
[    0.728899] Total HugeTLB memory allocated, 0
[    0.728984] VFS: Disk quotas dquot_6.5.1
[    0.729009] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.729096] io scheduler noop registered
[    0.729099] io scheduler anticipatory registered
[    0.729102] io scheduler deadline registered
[    0.729114] io scheduler cfq registered (default)
[    0.729126] pci 0000:00:02.0: Boot video device
[    0.800218] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.800246] assign_interrupt_mode Found MSI capability
[    0.800282] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.800319] Allocate Port Service[0000:00:1c.0:pcie02]
[    0.800392] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.800421] assign_interrupt_mode Found MSI capability
[    0.800452] Allocate Port Service[0000:00:1c.2:pcie00]
[    0.800482] Allocate Port Service[0000:00:1c.2:pcie02]
[    0.800555] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.800583] assign_interrupt_mode Found MSI capability
[    0.800614] Allocate Port Service[0000:00:1c.3:pcie00]
[    0.800642] Allocate Port Service[0000:00:1c.3:pcie02]
[    0.800715] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[    0.800743] assign_interrupt_mode Found MSI capability
[    0.800774] Allocate Port Service[0000:00:1c.4:pcie00]
[    0.800805] Allocate Port Service[0000:00:1c.4:pcie02]
[    0.801175] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000900000, using 3072k, total 7616k
[    0.801181] vesafb: mode is 1024x768x16, linelength=2048, pages=3
[    0.801184] vesafb: scrolling: redraw
[    0.801188] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.816555] Console: switching to colour frame buffer device 128x48
[    0.829392] fb0: VESA VGA frame buffer device
[    0.831471] Real Time Clock Driver v1.12ac
[    0.831725] hpet_resources: 0xfed00000 is busy
[    0.831780] Linux agpgart interface v0.103
[    0.831884] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    0.832302] pnp: the driver 'serial' has been registered
[    0.833069] brd: module loaded
[    0.833204] input: Macintosh mouse button emulation as /class/input/input0
[    0.833458] pnp: the driver 'i8042 kbd' has been registered
[    0.833467] i8042 kbd 00:04: driver attached
[    0.833494] pnp: the driver 'i8042 aux' has been registered
[    0.833505] i8042 aux 00:05: driver attached
[    0.833534] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.835695] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.836618] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.836739] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.836868] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.836996] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.837125] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.860142] mice: PS/2 mouse device common for all mice
[    0.860305] cpuidle: using governor ladder
[    0.860408] cpuidle: using governor menu
[    0.860822] TCP cubic registered
[    0.860911] NET: Registered protocol family 1
[    0.861021] NET: Registered protocol family 17
[    0.861231] registered taskstats version 1
[    0.861445] Freeing unused kernel memory: 372k freed
[    0.894448] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.121436] ACPI: SSDT 7F7B00E0, 0320 (r1    AMI   CPU1PM        1 INTL 20060113)
[    1.124620] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.127606] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.128085] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.132344] ACPI: SSDT 7F7B0400, 00E3 (r1    AMI   CPU2PM        1 INTL 20060113)
[    0.957132] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.138540] Marking TSC unstable due to TSC halts in idle
[    0.960138] ACPI: ACPI0007:01 is registered as cooling_device1
[    0.964077] ACPI: Processor [CPU2] (supports 8 throttling states)
[    1.031396] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    1.082471] ACPI: Thermal Zone [TZ00] (34 C)
[    1.299138] Clocksource tsc unstable (delta = -95044026 ns)
[    1.473853] USB Universal Host Controller Interface driver v3.0
[    1.475181] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.479155] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    1.479158] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.487199] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.491176] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    1.495254] usb usb1: configuration #1 chosen from 1 choice
[    1.499174] hub 1-0:1.0: USB hub found
[    1.503154] hub 1-0:1.0: 2 ports detected
[    1.333670] No dock devices found.
[    1.532468] SCSI subsystem initialized
[    1.579765] libata version 3.00 loaded.
[    1.615241] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.619178] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.623165] usb usb1: Product: UHCI Host Controller
[    1.627157] usb usb1: Manufacturer: Linux 2.6.25-1-amd64 uhci_hcd
[    1.631157] usb usb1: SerialNumber: 0000:00:1a.0
[    1.635190] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[    1.639165] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    1.639168] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.643206] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.647193] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000b880
[    1.651249] usb usb2: configuration #1 chosen from 1 choice
[    1.655182] hub 2-0:1.0: USB hub found
[    1.659164] hub 2-0:1.0: 2 ports detected
[    1.767042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.770948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.774947] usb usb2: Product: UHCI Host Controller
[    1.774949] usb usb2: Manufacturer: Linux 2.6.25-1-amd64 uhci_hcd
[    1.778947] usb usb2: SerialNumber: 0000:00:1a.1
[    1.778976] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    1.778983] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    1.778985] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.779024] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.779049] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    1.779145] usb usb3: configuration #1 chosen from 1 choice
[    1.779163] hub 3-0:1.0: USB hub found
[    1.779168] hub 3-0:1.0: 2 ports detected
[    1.682114] usb 1-1: new full speed USB device using uhci_hcd and address 2
[    1.885990] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.885992] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.885994] usb usb3: Product: UHCI Host Controller
[    1.885995] usb usb3: Manufacturer: Linux 2.6.25-1-amd64 uhci_hcd
[    1.885997] usb usb3: SerialNumber: 0000:00:1d.0
[    1.886017] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[    1.886023] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    1.886026] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.886066] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    1.886090] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    1.886173] usb usb4: configuration #1 chosen from 1 choice
[    1.886191] hub 4-0:1.0: USB hub found
[    1.886196] hub 4-0:1.0: 2 ports detected
[    1.993098] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.997017] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.001018] usb usb4: Product: UHCI Host Controller
[    2.005016] usb usb4: Manufacturer: Linux 2.6.25-1-amd64 uhci_hcd
[    2.009019] usb usb4: SerialNumber: 0000:00:1d.1
[    2.013033] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    2.017020] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    2.017023] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.021058] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    2.025040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    2.029103] usb usb5: configuration #1 chosen from 1 choice
[    2.033035] hub 5-0:1.0: USB hub found
[    2.037024] hub 5-0:1.0: 2 ports detected
[    2.144754] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.148675] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.152671] usb usb5: Product: UHCI Host Controller
[    2.156673] usb usb5: Manufacturer: Linux 2.6.25-1-amd64 uhci_hcd
[    1.913460] usb 1-1: configuration #1 chosen from 1 choice
[    2.160704] usb usb5: SerialNumber: 0000:00:1d.2
[    1.921773] usb 1-1: New USB device found, idVendor=147e, idProduct=2016
[    1.921775] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.921777] usb 1-1: Product: Fingerprint Sensor   
[    1.921778] usb 1-1: Manufacturer: TouchStrip        
[    1.947128] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    1.951095] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    1.951098] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.955126] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    1.964095] ehci_hcd 0000:00:1a.7: debug port 1
[    1.967088] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    1.967093] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7afbc00
[    1.991096] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    1.995173] usb usb6: configuration #1 chosen from 1 choice
[    1.999113] hub 6-0:1.0: USB hub found
[    2.003092] hub 6-0:1.0: 4 ports detected
[    2.111090] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    2.114983] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.118980] usb usb6: Product: EHCI Host Controller
[    2.122980] usb usb6: Manufacturer: Linux 2.6.25-1-amd64 ehci_hcd
[    2.126979] usb usb6: SerialNumber: 0000:00:1a.7
[    2.131014] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    2.134990] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    2.134993] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.139029] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    2.147996] ehci_hcd 0000:00:1d.7: debug port 1
[    2.150984] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    2.150990] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7afb800
[    2.402040] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    2.171128] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.175182] usb usb7: configuration #1 chosen from 1 choice
[    2.179128] hub 7-0:1.0: USB hub found
[    2.183106] hub 7-0:1.0: 6 ports detected
[    2.289847] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    2.293761] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.297760] usb usb7: Product: EHCI Host Controller
[    2.301763] usb usb7: Manufacturer: Linux 2.6.25-1-amd64 ehci_hcd
[    2.305761] usb usb7: SerialNumber: 0000:00:1d.7
[    2.568363] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    2.652351] firewire_ohci: Added fw-ohci device 0000:06:01.0, OHCI version 1.0
[    2.399114] ahci 0000:00:1f.2: version 3.0
[    2.399138] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
[    2.861313] usb 1-1: USB disconnect, address 2
[    3.104916] usb 1-1: new full speed USB device using uhci_hcd and address 3
[    2.894012] firewire_core: created device fw0: GUID 00e018000386e6a5, S400
[    3.282965] usb 1-1: configuration #1 chosen from 1 choice
[    3.031978] usb 1-1: New USB device found, idVendor=147e, idProduct=2016
[    3.035790] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.039788] usb 1-1: Product: Fingerprint Sensor   
[    3.043786] usb 1-1: Manufacturer: TouchStrip        
[    3.407929] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    3.411894] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
[    3.415898] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.416116] scsi0 : ahci
[    3.419964] scsi1 : ahci
[    3.423945] scsi2 : ahci
[    3.427963] ata1: SATA max UDMA/133 abar m2048@0xf7afb000 port 0xf7afb100 irq 1275
[    3.431895] ata2: SATA max UDMA/133 abar m2048@0xf7afb000 port 0xf7afb180 irq 1275
[    3.435897] ata3: SATA max UDMA/133 abar m2048@0xf7afb000 port 0xf7afb200 irq 1275
[    3.526613] usb 7-6: new high speed USB device using ehci_hcd and address 3
[    3.947187] usb 7-6: configuration #1 chosen from 1 choice
[    3.952235] usb 7-6: New USB device found, idVendor=05e3, idProduct=0503
[    3.955191] usb 7-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.959194] usb 7-6: Product: USB 2.0 PC Camera
[    4.174718] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.185452] ata1.00: ATA-7: SAMSUNG HM160JI, AD100-11, max UDMA/100
[    4.185454] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.194298] usb 5-1: new full speed USB device using uhci_hcd and address 3
[    4.198419] ata1.00: configured for UDMA/100
[    4.183652] usb 5-1: configuration #1 chosen from 1 choice
[    4.187985] usb 5-1: New USB device found, idVendor=0b05, idProduct=1712
[    4.191658] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    4.195656] usb 5-1: SerialNumber: 0194E8-5B-0002
[    4.514318] ata2: SATA link down (SStatus 0 SControl 300)
[    4.828048] ata3: SATA link down (SStatus 0 SControl 300)
[    4.575099] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160JI  AD10 PQ: 0 ANSI: 5
[    4.575186] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[    5.583493] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    5.587455] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    5.591457] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    5.591548] scsi3 : ahci
[    5.595485] ata4: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 19
[    6.184688] ata4: SATA link down (SStatus 0 SControl 300)
[    6.193684] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    6.196674] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    6.196703] sky2 0000:01:00.0: v1.21 addr 0xf7dfc000 irq 16 Yukon-EC Ultra (0xb4) rev 2
[    5.935964] sky2 eth0: addr 00:1a:92:d4:ec:a9
[    6.206981] Uniform Multi-Platform E-IDE driver
[    6.208669] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    6.214031] udev: renamed network interface eth0 to eth1
[    5.960745] Driver 'sd' needs updating - please use bus_type methods
[    5.963704] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.967646] sd 0:0:0:0: [sda] Write Protect is off
[    5.971628] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.235533] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at  PCI slot 0000:00:1f.1
[    5.971653] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.971705] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.971718] sd 0:0:0:0: [sda] Write Protect is off
[    5.971719] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.971742] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.971744]  sda:<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[    6.240689] ICH8M: not 100% native mode: will probe irqs later
[    6.009931]  sda1 sda2 <<6>ICH8M: IDE port disabled
[    6.248674]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:PIO
[    6.252675] Probing IDE interface ide0...
[    6.030459]  sda5 sda6 >
[    6.268776] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.977128] hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
[    7.314071] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    7.314371] hda: UDMA/33 mode selected
[    7.318350] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    7.133920] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[    7.135154] Uniform CD-ROM driver Revision: 3.20
[    7.252463] PM: Starting manual resume from disk
[    7.321276] kjournald starting.  Commit interval 5 seconds
[    7.323481] EXT3-fs: mounted filesystem with ordered data mode.
[   10.521845] input: PC Speaker as /class/input/input2
[   10.974872] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   10.978804] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[   10.982733] iTCO_wdt: No card detected
[   10.834123] input: Power Button (FF) as /class/input/input3
[   10.871791] agpgart: Detected an Intel 965GM Chipset.
[   10.875199] agpgart: Detected 7676K stolen memory.
[   10.891761] agpgart: AGP aperture is 256M @ 0xd0000000
[   10.894492] ACPI: Power Button (FF) [PWRF]
[   10.898387] input: Lid Switch as /class/input/input4
[   11.142856] Bluetooth: Core ver 2.11
[   11.171840] NET: Registered protocol family 31
[   11.174762] Bluetooth: HCI device and connection manager initialized
[   11.178740] Bluetooth: HCI socket layer initialized
[   11.216444] ACPI: Lid Switch [LID]
[   11.218806] input: Sleep Button (CM) as /class/input/input5
[   11.024489] PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
[   11.026326] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 17 (level, low) -> IRQ 17
[   11.294786] ACPI: Sleep Button (CM) [SLPB]
[   11.298797] input: Power Button (CM) as /class/input/input6
[   11.358790] ACPI: Power Button (CM) [PWRB]
[   11.383867] Bluetooth: HCI USB driver ver 2.9
[   11.166908] usbcore: registered new interface driver hci_usb
[   11.183448] ACPI: Battery Slot [BAT0] (battery present)
[   11.208387] ACPI: AC Adapter [AC0] (off-line)
[   11.534023] ricoh-mmc: Ricoh MMC Controller disabling driver
[   11.534762] ricoh-mmc: Copyright(c) Philip Langdale
[   11.538785] ricoh-mmc: Ricoh MMC controller found at 0000:06:01.2 [1180:0843] (rev 12)
[   11.542769] ricoh-mmc: Controller is now disabled.
[   11.579754] asus-laptop: Asus Laptop Support version 0.42
[   11.587209] asus-laptop: Error calling BSTS
[   11.590832] asus-laptop:   Z37E model detected
[   11.605588] Registered led device: asus::mail
[   11.630513] input: Video Bus as /class/input/input7
[   11.631999] sdhci: Secure Digital Host Controller Interface driver
[   11.634776] sdhci: Copyright(c) Pierre Ossman
[   11.638817] sdhci: SDHCI controller found at 0000:06:01.1 [1180:0822] (rev 22)
[   11.642809] ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17
[   11.646783] sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   11.650810] mmc0: SDHCI at 0xfbfff400 irq 17 DMA
[   11.702863] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   11.732536] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks
[   11.734781] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[   11.738864] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   11.742806] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   11.742832] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[   11.579279] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[   11.795806] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[   11.803399] phy0: Selected rate control algorithm 'iwl-4965-rs'
[   11.834451] input: SynPS/2 Synaptics TouchPad as /class/input/input8
[   11.679309] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[   11.680777] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   11.920942] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[   11.722660] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   13.812185] Adding 497972k swap on /dev/sda5.  Priority:-1 extents:1 across:497972k
[   14.142117] EXT3 FS on sda1, internal journal
[   14.795077] loop: module loaded
[   14.830439] [drm] Initialized drm 1.1.0 20060810
[   15.043250] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.044878] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   15.044972] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   15.729617] fuse init (API version 7.9)
[   15.778884] kjournald starting.  Commit interval 5 seconds
[   15.779533] EXT3 FS on sda6, internal journal
[   15.783246] EXT3-fs: mounted filesystem with ordered data mode.
[   22.296239] NET: Registered protocol family 10
[   22.300250] lo: Disabled Privacy Extensions
[   23.256481] pnp: the driver 'parport_pc' has been registered
[   23.029731] lp: driver loaded but no devices found
[   23.092568] ppdev: user-space parallel port driver
[   26.483432] RPC: Registered udp transport module.
[   26.484451] RPC: Registered tcp transport module.
[   26.349735] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   26.452395] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   26.484959] NFSD: starting 90-second grace period
[   31.306811] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   33.361164] Bluetooth: L2CAP ver 2.9
[   33.361944] Bluetooth: L2CAP socket layer initialized
[   33.568151] Bluetooth: RFCOMM socket layer initialized
[   33.570220] Bluetooth: RFCOMM TTY layer initialized
[   33.574156] Bluetooth: RFCOMM ver 1.8
[   34.469514] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   34.469817] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
[   34.362026] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.466066] sky2 eth1: enabling interface
[   34.474694] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   38.863163] ata1.00: configured for UDMA/100
[   38.863184] ata1: EH complete
[   38.863316] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   38.863362] sd 0:0:0:0: [sda] Write Protect is off
[   38.863370] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   38.863443] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   96.149484] CPU0 attaching NULL sched-domain.
[   96.149501] CPU1 attaching NULL sched-domain.
[   96.163024] CPU0 attaching sched-domain:
[   96.163039]  domain 0: span 00000003
[   96.163045]   groups: 00000001 00000002
[   96.163055]   domain 1: span 00000003
[   96.163060]    groups: 00000003
[   96.163070]    domain 2: span 00000003
[   96.163077]     groups: 00000003
[   96.163088] CPU1 attaching sched-domain:
[   96.163095]  domain 0: span 00000003
[   96.163102]   groups: 00000002 00000001
[   96.163115]   domain 1: span 00000003
[   96.163123]    groups: 00000003
[   96.163132]    domain 2: span 00000003
[   96.163139]     groups: 00000003

Software Environment: Debian Sid
Problem Description:

When the machine resumes from sleep, sound does not work anymore.
See Debian bug #480034 for more information:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=480034

This behaviour is NOT present in 2.6.24, while it happens with 2.6.25, vanilla 2.6.25.2 and 2.6.26-rc1.

Steps to reproduce:

1) Boot the machine (Asus Z37E running Sid)
2) Start a media player (in my case Banshee)
3) Play a song
4) Pause the song
5) Close the lid to suspend
6) Resume
7) Press play again

Here's the content of /var/log/messages after resume:

May  9 13:47:38 vasquez kernel: [  186.601919] PM: Syncing filesystems ...
done.
May  9 13:47:54 vasquez kernel: [  188.092004] Freezing user space processes
... (elapsed 0.00 seconds) done.
May  9 13:47:54 vasquez kernel: [  188.092813] Freezing remaining freezable
tasks ... (elapsed 0.00 seconds) done.
May  9 13:47:54 vasquez kernel: [  188.092974] Suspending console(s)
May  9 13:47:54 vasquez kernel: [  188.093498] ACPI: PCI interrupt for
device 0000:00:02.0 disabled
May  9 13:47:54 vasquez kernel: [  192.182003] sd 0:0:0:0: [sda]
Synchronizing SCSI cache
May  9 13:47:54 vasquez kernel: [  192.182122] sd 0:0:0:0: [sda] Stopping
disk
May  9 13:47:54 vasquez kernel: [  189.435728] ricoh-mmc: Suspending.
May  9 13:47:54 vasquez kernel: [  189.435755] ricoh-mmc: Controller is now
re-enabled.
May  9 13:47:54 vasquez kernel: [  189.435855] ACPI: PCI interrupt for
device 0000:06:01.1 disabled
May  9 13:47:54 vasquez kernel: [  189.474817] sky2 eth1: disabling
interface
May  9 13:47:54 vasquez kernel: [  189.506943] ACPI: PCI interrupt for
device 0000:02:00.0 disabled
May  9 13:47:54 vasquez kernel: [  189.566994] ACPI: PCI interrupt for
device 0000:03:00.0 disabled
May  9 13:47:54 vasquez kernel: [  190.104859] ACPI: PCI interrupt for
device 0000:00:1d.7 disabled
May  9 13:47:54 vasquez kernel: [  190.281801] ACPI: PCI interrupt for
device 0000:00:1d.2 disabled
May  9 13:47:54 vasquez kernel: [  190.281854] ACPI: PCI interrupt for
device 0000:00:1d.1 disabled
May  9 13:47:54 vasquez kernel: [  190.281907] ACPI: PCI interrupt for
device 0000:00:1d.0 disabled
May  9 13:47:54 vasquez kernel: [  190.491171] ACPI: PCI interrupt for
device 0000:00:1b.0 disabled
May  9 13:47:54 vasquez kernel: [  190.667848] ACPI: PCI interrupt for
device 0000:00:1a.7 disabled
May  9 13:47:54 vasquez kernel: [  190.758960] ACPI: PCI interrupt for
device 0000:00:1a.1 disabled
May  9 13:47:54 vasquez kernel: [  190.758992] ACPI: PCI interrupt for
device 0000:00:1a.0 disabled
May  9 13:47:54 vasquez kernel: [  190.762897] ACPI: Preparing to enter
system sleep state S3
May  9 13:47:54 vasquez kernel: [  190.765106] Disabling non-boot CPUs ...
May  9 13:47:54 vasquez kernel: [  190.878894] CPU 1 is now offline
May  9 13:47:54 vasquez kernel: [  190.878900] SMP alternatives: switching
to UP code
May  9 13:47:54 vasquez kernel: [  190.882813] CPU1 is down
May  9 13:47:54 vasquez kernel: [  190.882883] Enabling non-boot CPUs ...
May  9 13:47:54 vasquez kernel: [  190.899022] SMP alternatives: switching
to SMP code
May  9 13:47:54 vasquez kernel: [  190.900485] Booting processor 1/2 APIC
0x1
May  9 13:47:54 vasquez kernel: [  194.664936] Initializing CPU#1
May  9 13:47:54 vasquez kernel: [  194.664936] Calibrating delay using timer
specific routine.. 4389.13 BogoMIPS (lpj=8778263)
May  9 13:47:54 vasquez kernel: [  194.664936] CPU: L1 I cache: 32K, L1 D
cache: 32K
May  9 13:47:54 vasquez kernel: [  194.664936] CPU: L2 cache: 4096K
May  9 13:47:54 vasquez kernel: [  194.664936] CPU 1/1 -> Node 0
May  9 13:47:54 vasquez kernel: [  194.664936] CPU: Physical Processor ID: 0
May  9 13:47:54 vasquez kernel: [  194.664936] CPU: Processor Core ID: 1
May  9 13:47:54 vasquez kernel: [  194.664936] Intel(R) Core(TM)2 Duo CPU   
 T7500  @ 2.20GHz stepping 0a
May  9 13:47:54 vasquez kernel: [  194.664936] CPU1 is up
May  9 13:47:54 vasquez kernel: [  191.057619] ACPI: PCI Interrupt
0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
May  9 13:47:54 vasquez kernel: [  191.057675] usb usb3: root hub lost power
or was reset
May  9 13:47:54 vasquez kernel: [  191.057706] ACPI: PCI Interrupt
0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
May  9 13:47:54 vasquez kernel: [  191.057758] usb usb4: root hub lost power
or was reset
May  9 13:47:54 vasquez kernel: [  191.070907] ACPI: PCI Interrupt
0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
May  9 13:47:54 vasquez kernel: [  191.086954] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
May  9 13:47:54 vasquez kernel: [  191.087263] ACPI: PCI Interrupt
0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
May  9 13:47:54 vasquez kernel: [  191.087314] usb usb5: root hub lost power
or was reset
May  9 13:47:54 vasquez kernel: [  191.087332] ACPI: PCI Interrupt
0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
May  9 13:47:54 vasquez kernel: [  191.087383] usb usb6: root hub lost power
or was reset
May  9 13:47:54 vasquez kernel: [  191.087401] ACPI: PCI Interrupt
0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May  9 13:47:54 vasquez kernel: [  191.087452] usb usb7: root hub lost power
or was reset
May  9 13:47:54 vasquez kernel: [  191.102905] ACPI: PCI Interrupt
0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
May  9 13:47:54 vasquez kernel: [  191.103077] ACPI: PCI Interrupt
0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
May  9 13:47:54 vasquez kernel: [  192.139041] ACPI: PCI Interrupt
0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
May  9 13:47:54 vasquez kernel: [  192.163084] ACPI: PCI Interrupt
0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
May  9 13:47:54 vasquez kernel: [  192.431018] ata2: SATA link down (SStatus
0 SControl 300)
May  9 13:47:54 vasquez kernel: [  192.431042] ata3: SATA link down (SStatus
0 SControl 300)
May  9 13:47:54 vasquez kernel: [  193.183266] sky2 eth1: enabling interface
May  9 13:47:54 vasquez kernel: [  193.295113] ACPI: PCI Interrupt
0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17
May  9 13:47:54 vasquez kernel: [  193.295138] ricoh-mmc: Resuming.
May  9 13:47:54 vasquez kernel: [  193.295153] ricoh-mmc: Controller is now
disabled.
May  9 13:47:54 vasquez kernel: [  193.487075] ata4: SATA link down (SStatus
0 SControl 300)
May  9 13:47:54 vasquez kernel: [  193.883091] ata1: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
May  9 13:47:54 vasquez kernel: [  193.896966] ata1.00: configured for
UDMA/100
May  9 13:47:54 vasquez kernel: [  193.911174] sd 0:0:0:0: [sda] 312581808
512-byte hardware sectors (160042 MB)
May  9 13:47:54 vasquez kernel: [  193.911213] sd 0:0:0:0: [sda] Write
Protect is off
May  9 13:47:54 vasquez kernel: [  193.911282] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 13:47:54 vasquez kernel: [  193.943126] sd 0:0:0:0: [sda] Starting
disk
May  9 13:47:54 vasquez kernel: [  194.656742] hda: UDMA/33 mode selected
May  9 13:47:54 vasquez kernel: [  194.672205] ACPI: PCI Interrupt
0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
May  9 13:47:54 vasquez kernel: [  194.676906] sky2 eth1: Link is up at 100
Mbps, full duplex, flow control rx
May  9 13:47:54 vasquez kernel: [  194.680135] Restarting tasks ... <6>usb
2-6: USB disconnect, address 3
May  9 13:47:54 vasquez kernel: [  194.873866] done.
May  9 13:47:54 vasquez kernel: [  194.964158] usb 2-6: new high speed USB
device using ehci_hcd and address 4
May  9 13:47:54 vasquez kernel: [  195.115518] usb 2-6: configuration #1
chosen from 1 choice
May  9 13:47:54 vasquez kernel: [  195.116834] usb 2-6: New USB device
found, idVendor=05e3, idProduct=0503
May  9 13:47:54 vasquez kernel: [  195.116842] usb 2-6: New USB device
strings: Mfr=0, Product=1, SerialNumber=0
May  9 13:47:54 vasquez kernel: [  195.116846] usb 2-6: Product: USB 2.0 PC
Camera
May  9 13:47:54 vasquez kernel: [  195.116869] usb 3-1: USB disconnect,
address 2
May  9 13:47:54 vasquez kernel: [  195.243471] usb 4-2: USB disconnect,
address 2
May  9 13:47:55 vasquez kernel: [  195.519460] usb 4-2: new low speed USB
device using uhci_hcd and address 3
May  9 13:47:55 vasquez kernel: [  195.760952] usb 4-2: configuration #1
chosen from 1 choice
May  9 13:47:55 vasquez kernel: [  195.779452] input: Microsoft Microsoft
3-Button Mouse with IntelliEye(TM) as /class/input/input10
May  9 13:47:55 vasquez kernel: [  195.838743] input,hidraw0: USB HID v1.10
Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1a.1-2
May  9 13:47:55 vasquez kernel: [  195.838856] usb 4-2: New USB device
found, idVendor=045e, idProduct=0040
May  9 13:47:55 vasquez kernel: [  195.838860] usb 4-2: New USB device
strings: Mfr=1, Product=3, SerialNumber=0
May  9 13:47:55 vasquez kernel: [  195.838864] usb 4-2: Product: Microsoft
3-Button Mouse with IntelliEye(TM)
May  9 13:47:55 vasquez kernel: [  195.838868] usb 4-2: Manufacturer:
Microsoft
May  9 13:47:55 vasquez kernel: [  195.838914] usb 7-1: USB disconnect,
address 2
May  9 13:47:55 vasquez kernel: [  196.326301] usb 7-1: new full speed USB
device using uhci_hcd and address 3
May  9 13:47:56 vasquez kernel: [  196.569375] usb 7-1: configuration #1
chosen from 1 choice
May  9 13:47:56 vasquez kernel: [  196.576060] usb 7-1: New USB device
found, idVendor=0b05, idProduct=1712
May  9 13:47:56 vasquez kernel: [  196.576075] usb 7-1: New USB device
strings: Mfr=0, Product=0, SerialNumber=3
May  9 13:47:56 vasquez kernel: [  196.576083] usb 7-1: SerialNumber:
0194E8-5B-0002
May  9 13:47:56 vasquez kernel: [  197.057371] usb 3-1: new full speed USB
device using uhci_hcd and address 3
May  9 13:47:56 vasquez kernel: [  197.235641] usb 3-1: configuration #1
chosen from 1 choice
May  9 13:47:56 vasquez kernel: [  201.123983] usb 3-1: New USB device
found, idVendor=147e, idProduct=2016
May  9 13:47:56 vasquez kernel: [  201.123993] usb 3-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=0
May  9 13:47:56 vasquez kernel: [  201.123997] usb 3-1: Product: Fingerprint
Sensor   
May  9 13:47:56 vasquez kernel: [  201.124000] usb 3-1: Manufacturer:
TouchStrip
Comment 1 Arnaud Cornet 2008-05-10 07:22:19 UTC
Same here.
Note that unloading and reloading the snd_hda_intel module makes the sound work again.

my lspci output :

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 3093
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [130] Root Complex Link <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel
Comment 2 kujub 2008-05-25 01:49:59 UTC
Same here with VIA-Chipset (using 2.6.25.4 Arch Linux).
Unloading and reloading the snd_hda_intel module (followed by /usr/sbin/alsactl restore) makes the sound work again.

lspci output :

00:00.0 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
        Subsystem: VIA Technologies, Inc. P4M900 Host Bridge
        Flags: bus master, medium devsel, latency 8
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [80] AGP version 3.5
        Capabilities: [50] Power Management version 2

00:00.1 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
        Subsystem: VIA Technologies, Inc. P4M900 Host Bridge
        Flags: bus master, medium devsel, latency 0

00:00.2 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
        Subsystem: VIA Technologies, Inc. P4M900 Host Bridge
        Flags: bus master, medium devsel, latency 0

00:00.3 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
        Flags: bus master, medium devsel, latency 0

00:00.4 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
        Subsystem: VIA Technologies, Inc. P4M900 Host Bridge
        Flags: bus master, medium devsel, latency 0

00:00.5 PIC: VIA Technologies, Inc. P4M900 I/O APIC Interrupt Controller (prog-if 20 [IO(X)-APIC])
        Flags: bus master, fast devsel, latency 0

00:00.6 Host bridge: VIA Technologies, Inc. P4M900 Security Device
        Flags: bus master, fast devsel, latency 0

00:00.7 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
        Flags: bus master, medium devsel, latency 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Capabilities: [70] Power Management version 2

00:02.0 PCI bridge: VIA Technologies, Inc. P4M900 PCI to PCI Bridge Controller (rev 80) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: fc000000-feafffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [68] Power Management version 2
        Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
        Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+
        Capabilities: [98] Subsystem: VIA Technologies, Inc. Unknown device c323

00:03.0 PCI bridge: VIA Technologies, Inc. P4M900 PCI to PCI Bridge Controller (rev 80) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [68] Power Management version 2
        Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
        Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+
        Capabilities: [98] Subsystem: VIA Technologies, Inc. Unknown device c323

00:0f.0 IDE interface: VIA Technologies, Inc. Unknown device 5337 (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, medium devsel, latency 32, IRQ 21
        I/O ports at ec00 [size=8]
        I/O ports at e880 [size=4]
        I/O ports at e800 [size=8]
        I/O ports at e480 [size=4]
        I/O ports at e400 [size=16]
        I/O ports at e000 [size=256]
        Capabilities: [c0] Power Management version 2

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, medium devsel, latency 32
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        I/O ports at fc00 [size=16]
        Capabilities: [c0] Power Management version 2

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, medium devsel, latency 32, IRQ 20
        I/O ports at d480 [size=32]
        Capabilities: [80] Power Management version 2

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, medium devsel, latency 32, IRQ 22
        I/O ports at d800 [size=32]
        Capabilities: [80] Power Management version 2

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, medium devsel, latency 32, IRQ 21
        I/O ports at d880 [size=32]
        Capabilities: [80] Power Management version 2

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, medium devsel, latency 32, IRQ 23
        I/O ports at dc00 [size=32]
        Capabilities: [80] Power Management version 2

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, medium devsel, latency 32, IRQ 21
        Memory at fbfffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: medium devsel
        Capabilities: [c0] Power Management version 2

00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
        Subsystem: VIA Technologies, Inc. Unknown device 337e
        Flags: bus master, medium devsel, latency 128
        Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, medium devsel, latency 32, IRQ 23
        I/O ports at d000 [size=256]
        Memory at fbfff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2

00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
        Flags: bus master, fast devsel, latency 0
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+

00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+
        Capabilities: [70] Subsystem: Micro-Star International Co., Ltd. Unknown device 7255

02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 SE] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: CardExpert Technology Unknown device 1401
        Flags: bus master, fast devsel, latency 0, IRQ 24
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at feae0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint, MSI 00

80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 7255
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00

Comment 3 kujub 2008-05-29 09:26:12 UTC
Tried with a vanilla build of 2.6.25.4 now with same results. (Same machine as in comment #2)
Comment 4 kujub 2008-05-31 06:20:45 UTC
Found in /var/log/messages :

hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...

This is reported above too.

I added a model parameter line to /etc/modprobe.d/sound :

# ALC883/888
#  3stack-dig   3-jack with SPDIF I/O
#  6stack-dig   6-jack digital with SPDIF I/O
#  3stack-6ch    3-jack 6-channel
#  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
options snd-hda-intel model=6stack-dig
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel

... and after a reboot all worked normal.

Many thanks to Carlos Eduardo (who had exactly the same problem) !
Comment 5 Jack Malmostoso 2008-06-01 01:08:23 UTC
Indeed!
I added model=3stack-dig since I have way less than 6 jacks but it sure worked. The "unknown model" message also disappeared at boot.

Thank you for this suggestion, not sure what to do with this "bug" now.
Comment 6 kujub 2008-06-01 04:33:21 UTC
Created attachment 16354 [details]
dmidecode output

Good !

I changed it to

options snd-hda-intel model=6stack-dig-demo

meanwhile because center/lfo and rear outputs where swapped.


Maybe some more models to be auto detected need to be added to the driver ?

Appending dmidecode output just in case it is usefull ...
Comment 7 kujub 2008-06-01 07:35:19 UTC
Argg!!! - changing to  model=6stack-dig-demo  broke it again !

There seem to be models which resume good and such that don't.

So this bug is _not_ yet resolved for me.

Will try to find some really working model later ...
Comment 8 kujub 2008-06-01 11:15:46 UTC
... hmm, 6stack-hp and 6stack-dell seem to work half way,
but with one problem: When I drag the balance slider to the right, the baster volume slider moves too. It moves only downward, dragging the balance back to the left does not move it upwards again.

So after trying all models for ALC883 which are not stated to be only 3stack or 2-channel, I found no perfect solution. I think 6stack-dig-demo should just do a better job during suspend/resume or there should be an additional model for this mobo. (demidecode output in comment #6)
Comment 9 Jack Malmostoso 2008-06-02 03:35:05 UTC
Adding one model fixes the suspend problem, but I have no output to the headphones anymore :(
I'll try all models available to see if I can find one that does both things, but it sure is annoying... it's still a regression from 2.6.24, that's sure.
Comment 10 Takashi Iwai 2008-06-02 03:41:00 UTC
Could you guys test 2.6.26-rc4 kernel whether the same problem exists *WITHOUT* model option?

If yes, we have a good chance to backport the fix patch.  If not, we have to fix urgently for 2.6.26, too.

Thanks.
Comment 11 Jack Malmostoso 2008-06-02 11:13:59 UTC
Dear Takashi,

I have tested with 2.6.26-rc4 and the problem is still there.
If I include the model, I get sound after resume but no headphones.
If I don't include the model, headphones work but no sound after resume.

My kernel was compiled using the same .config as 2.6.25 and 2.6.24.

Thanks for your help!
Comment 12 Takashi Iwai 2008-06-03 04:14:37 UTC
OK, it's good to know.
Could you run alsa-info.sh with --no-upload option before and after PM, and attach the generated files to compare?
    http://hg.alsa-project.org/alsa/raw-file/tip/alsa-info.sh
Run this for the case without the model option.

I have already similar bug reports regarding ALC88x, but I still don't figure out which path is broken.

Thanks.
Comment 13 Jack Malmostoso 2008-06-03 05:06:39 UTC
Created attachment 16373 [details]
alsa-info before suspend
Comment 14 Jack Malmostoso 2008-06-03 05:07:03 UTC
Created attachment 16374 [details]
alsa-info after suspend
Comment 15 Jack Malmostoso 2008-06-03 05:07:51 UTC
I have created the two files as requested. I hope it helps, I'll be happy to test any patches.
Comment 16 Takashi Iwai 2008-06-03 05:26:30 UTC
Could you try the patch below (hda-alc-autoinit-fix.diff) ?
It's against 2.6.26-rc4.  It might fix also 2.6.25 issue as well, but please try 2.6.26 at first.
Comment 17 Takashi Iwai 2008-06-03 05:27:48 UTC
Created attachment 16375 [details]
Fix resume with auto-configuration of Realtek codecs
Comment 18 Jack Malmostoso 2008-06-03 09:43:31 UTC
Hello Takashi,

your patch fixed the problem on my machine with 2.6.26-rc4.
Thank you for your help!
Comment 19 kujub 2008-06-03 09:54:54 UTC
I tried it on 2.6.25.4 vanilla meanwhile and it is fixed here too.
Thank you very much !
Comment 20 Adrian Bunk 2008-06-05 01:31:36 UTC
fixed by commit 07bc76dfa19b10017b518dd9aa1b2719e8c863de

Note You need to log in before you can comment on or make changes to this bug.