Latest working kernel version: Unknown Earliest failing kernel version: Uknown Distribution: Ubuntu 8.04 beta with stock 2.6.24.4 kernel Hardware Environment: Lenovo 3000N200 (and various laptops) Software Environment: Problem Description: Continuous raw reads from CD-ROM fails on power suspend/resume. Steps to reproduce: dd if=/dev/scd0 of=/dev/null and then: echo mem > /sys/power/state on resume, dd fails with the error: dd: reading `/dev/scd0': Input/output error 27360+0 records in 27360+0 records out and dmesg reports: [ 1.144598] end_request: I/O error, dev sr0, sector 27360 [ 1.144604] printk: 55 messages suppressed. [ 1.144608] Buffer I/O error on device sr0, logical block 3420 [ 1.145580] Buffer I/O error on device sr0, logical block 3453 [ 1.145653] Buffer I/O error on device sr0, logical block 3454 [ 1.145722] Buffer I/O error on device sr0, logical block 3455 [ 1.145791] Buffer I/O error on device sr0, logical block 3456 [ 1.145859] Buffer I/O error on device sr0, logical block 3457 [ 1.145928] Buffer I/O error on device sr0, logical block 3458 [ 1.145996] Buffer I/O error on device sr0, logical block 3459 IDE controller: 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03) CD-ROM: MATSHITA DVD-RAM UJ-850 z RB32 PQ: 0 ANSI: 5
Can you please post full result of 'dmesg'? There should be leading libata messages before those buffer IO failure messages. Also, please post the result of "lspci -nn". What do you mean by "and various laptops"? Is this problem common to other laptops w/ the same drive?
Hi, here is the dmesg log from when the suspend occurs to when the resume completes. [ 758.400008] UDF-fs: No VRS found [ 758.861190] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 758.861386] ISO 9660 Extensions: RRIP_1991A [ 763.526272] wlan0: deauthenticate(reason=3) [ 763.966240] ACPI: PCI interrupt for device 0000:06:00.0 disabled [ 764.194613] ACPI: PCI interrupt for device 0000:04:00.0 disabled [ 766.248300] Syncing filesystems ... done. [ 766.257181] PM: Preparing system for mem sleep [ 766.257186] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 766.264272] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 766.264314] PM: Entering mem sleep [ 766.264317] Suspending console(s) [ 766.264320] drm_sysfs_suspend [ 766.264796] ACPI: PCI interrupt for device 0000:00:02.0 disabled [ 766.358737] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 766.492042] sd 2:0:0:0: [sda] Stopping disk [ 766.521862] ACPI handle has no context! [ 766.522031] ACPI handle has no context! [ 766.522052] ACPI: PCI interrupt for device 0000:08:06.1 disabled [ 766.522059] ACPI handle has no context! [ 766.527499] ACPI handle has no context! [ 766.528515] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 766.528757] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 766.528918] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 766.531244] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 766.531289] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 766.531334] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 766.533565] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 766.535784] ACPI: PCI interrupt for device 0000:00:1a.7 disabled [ 766.537954] ACPI: PCI interrupt for device 0000:00:1a.1 disabled [ 766.538000] ACPI: PCI interrupt for device 0000:00:1a.0 disabled [ 766.545048] Disabling non-boot CPUs ... [ 766.545070] CPU0 attaching NULL sched-domain. [ 766.545072] CPU1 attaching NULL sched-domain. [ 766.656725] CPU 1 is now offline [ 766.656729] SMP alternatives: switching to UP code [ 766.658232] CPU0 attaching sched-domain: [ 766.658235] domain 0: span 01 [ 766.658237] groups: 01 [ 766.658402] CPU1 is down [ 766.658571] Extended CMOS year: 2000 [ 0.286121] Back to C! [ 0.286440] Extended CMOS year: 2000 [ 0.286580] Enabling non-boot CPUs ... [ 0.286659] CPU0 attaching NULL sched-domain. [ 0.296667] SMP alternatives: switching to SMP code [ 0.297934] Booting processor 1/2 APIC 0x1 [ 0.308247] Initializing CPU#1 [ 0.388524] Calibrating delay using timer specific routine.. 2992.39 BogoMIPS (lpj=5984780) [ 0.388532] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.388534] CPU: L2 cache: 2048K [ 0.388537] CPU 1/1 -> Node 0 [ 0.388539] CPU: Physical Processor ID: 0 [ 0.388540] CPU: Processor Core ID: 1 [ 0.388926] Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d [ 0.389017] CPU0 attaching sched-domain: [ 0.389020] domain 0: span 03 [ 0.389022] groups: 01 02 [ 0.389025] domain 1: span 03 [ 0.389027] groups: 03 [ 0.389029] CPU1 attaching sched-domain: [ 0.389030] domain 0: span 03 [ 0.389032] groups: 02 01 [ 0.389034] domain 1: span 03 [ 0.389036] groups: 03 [ 0.389458] CPU1 is up [ 0.390533] Switched to high resolution mode on CPU 1 [ 0.410855] PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 105) [ 0.410869] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) [ 0.424051] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) [ 0.424067] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.424074] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 0.424131] usb usb1: root hub lost power or was reset [ 0.424153] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 0.424159] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 0.424214] usb usb2: root hub lost power or was reset [ 0.425994] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.426003] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 0.428197] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [ 0.428229] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 0.428238] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 0.445159] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20002020, writing 2020) [ 0.445173] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407) [ 0.445218] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.445253] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) [ 0.445298] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.445332] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) [ 0.445376] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.445401] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20005050, writing 5050) [ 0.445414] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) [ 0.445458] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.445467] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 0.445473] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 0.445528] usb usb3: root hub lost power or was reset [ 0.445549] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.445555] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 0.445610] usb usb4: root hub lost power or was reset [ 0.445642] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.445648] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 0.445703] usb usb5: root hub lost power or was reset [ 0.447456] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 0.447464] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 0.447599] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.447695] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) [ 0.447707] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 0.447713] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 0.450662] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.450671] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 0.452307] PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing 50000000) [ 0.452365] PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a) [ 0.452434] PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f8000000) [ 0.452447] PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) [ 0.452467] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100102) [ 0.452599] PM: Writing back config space on device 0000:06:00.0 at offset c (was 0, writing ffdf0000) [ 0.452651] PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 10) [ 0.452668] PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100000, writing 40100102) [ 0.507569] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc200000-fc2007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 0.515455] ACPI: PCI Interrupt 0000:08:06.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 0.515491] PM: Writing back config space on device 0000:08:06.2 at offset b (was 382b17aa, writing 382c17aa) [ 0.515515] PM: Writing back config space on device 0000:08:06.2 at offset 2 (was 8800001, writing 880000a) [ 0.515524] PM: Writing back config space on device 0000:08:06.2 at offset 0 (was 8431180, writing 5921180) [ 0.515558] PM: Writing back config space on device 0000:08:06.3 at offset b (was 382c17aa, writing 382d17aa) [ 0.515583] PM: Writing back config space on device 0000:08:06.3 at offset 2 (was 880000a, writing 8800005) [ 0.515592] PM: Writing back config space on device 0000:08:06.3 at offset 0 (was 5921180, writing 8521180) [ 0.593264] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 0.593268] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 0.616948] ata1.00: configured for UDMA/33 [ 0.924493] sd 2:0:0:0: [sda] Starting disk [ 1.071947] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 1.071950] ata3.00: ACPI cmd ef/03:22:00:00:00:a0 filtered out [ 1.076172] ata3.00: configured for UDMA/133 [ 1.076740] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 1.076760] sd 2:0:0:0: [sda] Write Protect is off [ 1.076763] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.076791] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.189352] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.190752] PM: Finishing wakeup. [ 1.190754] Restarting tasks ... <6>usb 2-1: USB disconnect, address 4 [ 1.200010] end_request: I/O error, dev sr0, sector 45280 [ 1.200017] Buffer I/O error on device sr0, logical block 11320 [ 1.200067] Buffer I/O error on device sr0, logical block 11321 [ 1.200112] Buffer I/O error on device sr0, logical block 11322 [ 1.200155] Buffer I/O error on device sr0, logical block 11323 [ 1.200199] Buffer I/O error on device sr0, logical block 11324 [ 1.200241] Buffer I/O error on device sr0, logical block 11325 [ 1.200286] Buffer I/O error on device sr0, logical block 11326 [ 1.200329] Buffer I/O error on device sr0, logical block 11327 [ 1.200373] Buffer I/O error on device sr0, logical block 11328 [ 1.200416] Buffer I/O error on device sr0, logical block 11329 [ 1.203571] done. [ 1.338764] usb 4-2: USB disconnect, address 2 [ 1.589268] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 1.589274] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 1.589411] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 1.589432] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 1.590063] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 1.733026] usb 6-4: USB disconnect, address 3 [ 1.733179] tg3.c:v3.86 (November 9, 2007) [ 1.733226] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 1.733248] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 1.765481] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 1.767357] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 1.786910] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1.813724] usb 6-4: new high speed USB device using ehci_hcd and address 5 [ 1.916814] usb 6-4: configuration #1 chosen from 1 choice [ 1.917697] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013) [ 2.032938] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1b:38:0c:7f:47 [ 2.032947] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 2.032950] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.097084] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.318252] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.335024] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2.422616] usb 2-1: new full speed USB device using uhci_hcd and address 5 [ 2.572020] usb 2-1: configuration #1 chosen from 1 choice [ 2.794502] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 2.833751] usb 4-2: configuration #1 chosen from 1 choice [ 5.260868] VFS: busy inodes on changed media. [ 5.266765] VFS: busy inodes on changed media. [ 5.691934] wlan0: Initial auth_alg=0 [ 5.691944] wlan0: authenticate with AP 00:1a:c1:38:47:d4 [ 5.693302] wlan0: RX authentication from 00:1a:c1:38:47:d4 (alg=0 transaction=2 status=0) [ 5.693309] wlan0: authenticated [ 5.693313] wlan0: associate with AP 00:1a:c1:38:47:d4 [ 5.697888] wlan0: RX AssocResp from 00:1a:c1:38:47:d4 (capab=0x431 status=0 aid=1) [ 5.697898] wlan0: associated [ 5.698443] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0 [ 5.701599] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5.701910] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 5.702148] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 5.702453] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 And the result of lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4227] (rev 02) 06:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02) 08:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] 08:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) 08:06.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 01) 08:06.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 0a) The drive of my Lenovo 3000N200 is: MATSHITA DVD-RAM UJ-850 z RB32 PQ: 0 ANSI: 5 This problem seems to occur with a Toshiba Tecra A7 with the following drive: MATSHITA DVD-RAM UJ-850S 1.20 PQ: 0 ANSI: 5 so I am not sure if it there needs some quirk horkage needed for this particular range of MATSHITA drives, or if it's a problem with the underlying sata core. and lspci: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at f0a00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0b00000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at f0a80000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Toshiba America Info Systems Toshiba Satellite A100-796 audio (Realtek ALC861) [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at f0b40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0600000-f06fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 2, PowerLimit 6.500000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0100c Data: 41c1 Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0700000-f07fffff Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <256ns, L1 <4us Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 3, PowerLimit 6.500000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0100c Data: 41c9 Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=06, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f0800000-f08fffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 4, PowerLimit 6.500000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0100c Data: 41d1 Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 4: I/O ports at 1820 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at 1840 [size=32] 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 17 Region 4: I/O ports at 1880 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0d44000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=07, subordinate=0b, sec-latency=56 Memory behind bridge: f0900000-f09fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master]) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 18b0 [size=16] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 18c0 [size=32] 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller [11ab:4353] (rev 14) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 219 Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 2000 [size=256] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 416a Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0 Link: Latency L0s <256ns, L1 unlimited Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Unknown device [8086:1040] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 220 Region 0: Memory at f0700000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 4162 Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <128ns, L1 <64us Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 07:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0906000 (32-bit, non-prefetchable) [size=4K] Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 Memory window 0: f4000000-f7fff000 (prefetchable) Memory window 1: f8000000-fbfff000 I/O window 0: 00001400-000014ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 07:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin B routed to IRQ 16 Region 0: Memory at f0905000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f0900000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 07:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0904000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 07:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01) Subsystem: Toshiba America Info Systems Unknown device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0905800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
1. Please attach full kernel log including boot messages, suspend, resume and following failure. 2. Can you please give a shot at 2.6.25-rc8. We now support hardreset for ich8/9 piix's and libata can kick the device harder in the ass if it doesn't wake up. Thanks.
Hi, Tried to test against 2.6.25-rc8 but the resume does not work now, so this is becoming difficult to test. Will try 2.6.25 when I have some free time. Colin
ping
This bug should be closed due to inactivity.
OK