Bug 8830
| Summary: | HUAWEI e630 data cards problem | ||
|---|---|---|---|
| Product: | Drivers | Reporter: | inguna (inguna) |
| Component: | USB | Assignee: | Greg Kroah-Hartman (greg) |
| Status: | CLOSED CODE_FIX | ||
| Severity: | normal | CC: | bunk, info, protasnb |
| Priority: | P1 | ||
| Hardware: | All | ||
| OS: | Linux | ||
| Kernel Version: | 2.6.22.1 (last stable from kernel.org) | Subsystem: | |
| Regression: | Yes | Bisected commit-id: | |
| Bug Depends on: | |||
| Bug Blocks: | 5089 | ||
Did you tell the pl2303 driver to bind to this device, or did it do it on its own? Can you try out the 2.6.23-rc1 kernel to see if that solves this problem? >Did you tell the pl2303 driver to bind to this device, or did it do it on its >own? what i see / recognize it? full dmesg from 2.6.23rc1: strange in dmesg at start it write a ver 2.6.22.1 - i download a patch from kernel org, copy it to /usr/src/2.6.22.1/, and bzcat patch23rc1.bz2 | patch -p1 patchink like ok ( no errors messaages), then i run make menuconfig, and compile all - again, without errors. btw, first bug:unable to handle... in dmesg is _before_ a insert huawei card...? second bug: unable to handle is after a insert huawei card.... [root@localhost gazella]# dmesg Linux version 2.6.22.1 (root@localhost) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #3 SMP Thu Aug 2 11:25:05 EEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) BIOS-e820: 000000001f6e0000 - 000000001f6ea000 (ACPI data) BIOS-e820: 000000001f6ea000 - 000000001f700000 (ACPI NVS) BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 502MB LOWMEM available. Entering add_active_range(0, 0, 128736) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 128736 HighMem 128736 -> 128736 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 128736 On node 0 totalpages: 128736 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 973 pages used for memmap Normal zone: 123667 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F7A10, 0014 (r0 PTLTD ) ACPI: RSDT 1F6E5E41, 003C (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 1F6E9E78, 0084 (r2 INTEL ALVISO 6040000 LOHR 5F) ACPI: DSDT 1F6E625A, 3C1E (r1 INTEL ALVISO 6040000 MSFT 100000E) ACPI: FACS 1F6FAFC0, 0040 ACPI: APIC 1F6E9EFC, 0068 (r1 INTEL ALVISO 6040000 LOHR 5F) ACPI: BOOT 1F6E9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: MCFG 1F6E9F9C, 003C (r1 INTEL ALVISO 6040000 LOHR 5F) ACPI: SSDT 1F6E6078, 01DE (r1 PmRef Cpu0Cst 3001 INTL 20030224) ACPI: SSDT 1F6E5E7D, 01FB (r1 PmRef CpuPm 3000 INTL 20030224) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 127731 Kernel command line: BOOT_IMAGE=2.6.22.1 root=305 resume=/dev/hda6 splash=silent acpi_sleep=s3_bios mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1496.454 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 505872k/514944k available (2320k kernel code, 8560k reserved, 820k data, 256k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffe15000 - 0xfffff000 (1960 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB) .init : 0xc0418000 - 0xc0458000 ( 256 kB) .data : 0xc0344228 - 0xc0411424 ( 820 kB) .text : 0xc0100000 - 0xc0344228 (2320 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2996.18 BogoMIPS (lpj=5992371) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed ACPI: Core revision 20070126 CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08 Total of 1 processors activated (2996.18 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62<6>ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses') Please report the result to <bk@suse.de> to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 8 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Time: tsc clocksource has been installed. pnp: 00:04: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved pnp: 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved pnp: 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved PCI: Bus 7, cardbus bridge: 0000:06:09.0 IO window: 00003400-000034ff IO window: 00003800-000038ff PREFETCH window: 30000000-33ffffff MEM window: 38000000-3bffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: b0100000-b01fffff PREFETCH window: 30000000-33ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 265k freed Simple Boot Flag at 0x37 set to 0x1 Machine check exception polling timer started. apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1186056599.324:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:00:02.0 vesafb: framebuffer at 0xc0000000, mapped to 0xe0080000, using 1875k, total 7872k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 21 (level, low) -> IRQ 17 ACPI: PCI interrupt for device 0000:00:1e.3 disabled RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 18 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: HTS424040M9AT00, ATA DISK drive hdb: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive hda: selected mode 0x45 hdb: selected mode 0x42 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 > PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 TCP cubic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 6 devices found Freeing unused kernel memory: 256k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0040000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 Yenta: CardBus bridge found at 0000:06:09.0 [1025:006a] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:09.0, mfunc 0x00001022, devctl 0x44 Yenta: ISA IRQ mask 0x04f8, PCI irq 16 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID0] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI Exception (processor_throttling-0084): AE_NOT_FOUND, Evaluating _PTC [20070126] ACPI Exception (processor_throttling-0147): AE_NOT_FOUND, Evaluating _TSS [20070126] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (processor_core-0784): AE_NOT_FOUND, Processor Device is not present [20070126] Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. ACPI: Thermal Zone [TZS0] (55 C) ACPI: Thermal Zone [TZS1] (44 C) ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com EXT3 FS on hda5, internal journal Clocksource tsc unstable (delta = -63275608 ns) Adding 907632k swap on /dev/hda6. Priority:-1 extents:1 across:907632k NTFS driver 2.1.28 [Flags: R/O MODULE]. NTFS volume version 3.1. loop: module loaded hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 NET: Registered protocol family 17 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 23 eth0: RealTek RTL8139 at 0xe027e000, 00:0a:e4:e3:72:a5, IRQ 23 eth0: Identified 8139 chip type 'RTL-8100B/8139D' net eth1: device_rename: sysfs_create_symlink failed (-17) eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1e.2 to 64 tsdev (compaq touchscreen emulation) is scheduled for removal. See Documentation/feature-removal-schedule.txt for details. intel8x0_measure_ac97_clock: measured 55492 usecs intel8x0: clocking to 48000 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth1: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18 [drm] Initialized i915 1.6.0 20060119 on minor 0 smbfs: Unrecognized mount option noexec smbfs: Unrecognized mount option noexec smbfs: Unrecognized mount option noexec BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: e02e4b17 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: nls_cp437 nls_iso8859_1 smbfs i915 drm nfsd exportfs lockd nfs_acl auth_rpcgss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq sunrpc snd_seq_device snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore ipv6 8139too mii af_packet ide_cd loop nls_utf8 ntfs dm_mod video output thermal processor fan container button battery ac pcmcia yenta_socket rsrc_nonstatic pcmcia_core intel_agp agpgart nvram ehci_hcd uhci_hcd usbcore evdev joydev tsdev CPU: 0 EIP: 0060:[<e02e4b17>] Not tainted VLI EFLAGS: 00210246 (2.6.22.1 #3) EIP is at acpi_processor_throttling_seq_show+0x9e/0xe4 [processor] eax: 00000000 ebx: d128ff34 ecx: 00000000 edx: 00000000 esi: df380000 edi: 00000000 ebp: d128ff08 esp: d128fedc ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process kded (pid: 3849, ti=d128e000 task=c1548d90 task.ti=d128e000) Stack: d0b63400 e02e746c 00000008 00000000 00000000 00000007 00000000 d0b63400 d128ff34 d0b63400 00000001 d128ff48 c0198095 00000400 b7f9b000 d26496c0 d0b63420 000b7f9b 00000000 00000000 00000000 00000000 00000000 00000000 Call Trace: [<c010521a>] show_trace_log_lvl+0x1a/0x30 [<c01052e1>] show_stack_log_lvl+0xb1/0xe0 [<c01054e2>] show_registers+0x1d2/0x2e0 [<c0105706>] die+0x116/0x280 [<c011e0de>] do_page_fault+0x35e/0x640 [<c034347a>] error_code+0x72/0x78 [<c0198095>] seq_read+0x65/0x280 [<c01b62e8>] proc_reg_read+0x58/0x80 [<c017ec14>] vfs_read+0x94/0x130 [<c017f0ed>] sys_read+0x3d/0x70 [<c01041b6>] sysenter_past_esp+0x5f/0x85 ======================= Code: 24 e8 fe 30 eb df 8b 45 f0 ba c2 74 2e e0 e8 01 2e eb df c7 45 ec 00 00 00 00 eb 43 8b 86 04 03 00 00 8b 55 ec 3b be d8 02 00 00 <8b> 0c 02 b8 20 00 00 00 ba 2a 00 00 00 0f 45 d0 8b 45 f0 89 7c EIP: [<e02e4b17>] acpi_processor_throttling_seq_show+0x9e/0xe4 [processor] SS:ESP 0068:d128fedc pccard: CardBus card inserted into slot 0 yenta EnE: chaning testregister 0xC9, 04 -> 04 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Enabling device 0000:07:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 22 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:07:00.0 to 64 ohci_hcd 0000:07:00.0: OHCI Host Controller ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6 ohci_hcd 0000:07:00.0: irq 16, io mem 0x38000000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected PCI: Enabling device 0000:07:00.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:07:00.1 to 64 ohci_hcd 0000:07:00.1: OHCI Host Controller ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 7 ohci_hcd 0000:07:00.1: irq 16, io mem 0x38001000 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 1 port detected usb 6-1: new full speed USB device using ohci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 pl2303 6-1:1.0: pl2303 converter detected usb 6-1: pl2303 converter now attached to ttyUSB0 pl2303 6-1:1.1: pl2303 converter detected usb 6-1: pl2303 converter now attached to ttyUSB1 pl2303 6-1:1.2: pl2303 converter detected usb 6-1: pl2303 converter now attached to ttyUSB2 usbcore: registered new interface driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 BUG: unable to handle kernel NULL pointer dereference at virtual address 00000028 printing eip: e05c2796 *pde = 00000000 Oops: 0002 [#2] SMP Modules linked in: option pl2303 usbserial ohci_hcd nls_cp437 nls_iso8859_1 smbfs i915 drm nfsd exportfs lockd nfs_acl auth_rpcgss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq sunrpc snd_seq_device snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore ipv6 8139too mii af_packet ide_cd loop nls_utf8 ntfs dm_mod video output thermal processor fan container button battery ac pcmcia yenta_socket rsrc_nonstatic pcmcia_core intel_agp agpgart nvram ehci_hcd uhci_hcd usbcore evdev joydev tsdev CPU: 0 EIP: 0060:[<e05c2796>] Tainted: G D VLI EFLAGS: 00010246 (2.6.22.1 #3) EIP is at pl2303_open+0x456/0x9e0 [pl2303] eax: 00000000 ebx: 00000000 ecx: 00000000 edx: c08b1c00 esi: c26e67c0 edi: d11d6c00 ebp: c33bfe70 esp: c33bfe14 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process hald-probe-seri (pid: 4304, ti=c33be000 task=d2840e10 task.ti=c33be000) Stack: 00000040 00000009 00000000 00000000 00000000 00000064 c0121a10 00000000 dedc1820 00000003 00000000 c091e800 d16b3200 c33bfe54 c0262dda 00000000 c33bfe9c c0263c73 c33bfe68 c26e67c0 d11d6c00 c26e67c0 c091e800 c33bfe9c Call Trace: [<c010521a>] show_trace_log_lvl+0x1a/0x30 [<c01052e1>] show_stack_log_lvl+0xb1/0xe0 [<c01054e2>] show_registers+0x1d2/0x2e0 [<c0105706>] die+0x116/0x280 [<c011e0de>] do_page_fault+0x35e/0x640 [<c034347a>] error_code+0x72/0x78 [<e0625367>] serial_open+0xf7/0x150 [usbserial] [<c0266b0b>] tty_open+0x14b/0x2e0 [<c0181023>] chrdev_open+0xa3/0x190 [<c017cb98>] __dentry_open+0xa8/0x1a0 [<c017cd35>] nameidata_to_filp+0x35/0x40 [<c017cd89>] do_filp_open+0x49/0x50 [<c017cdd9>] do_sys_open+0x49/0xe0 [<c017ceac>] sys_open+0x1c/0x20 [<c01041b6>] sysenter_past_esp+0x5f/0x85 ======================= Code: 28 8b 47 44 ba d0 00 00 00 e8 27 13 aa ff 85 c0 89 c3 0f 85 24 05 00 00 8b 0d 00 68 5c e0 85 c9 0f 85 37 04 00 00 8b 47 24 8b 16 <89> 50 28 8b 47 24 ba d0 00 00 00 e8 fa 12 aa ff 89 c3 31 c0 85 EIP: [<e05c2796>] pl2303_open+0x456/0x9e0 [pl2303] SS:ESP 0068:c33bfe14 BUG: unable to handle kernel NULL pointer dereference at virtual address 00000028 printing eip: e05c2796 *pde = 00000000 Oops: 0002 [#3] SMP Modules linked in: option pl2303 usbserial ohci_hcd nls_cp437 nls_iso8859_1 smbfs i915 drm nfsd exportfs lockd nfs_acl auth_rpcgss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq sunrpc snd_seq_device snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore ipv6 8139too mii af_packet ide_cd loop nls_utf8 ntfs dm_mod video output thermal processor fan container button battery ac pcmcia yenta_socket rsrc_nonstatic pcmcia_core intel_agp agpgart nvram ehci_hcd uhci_hcd usbcore evdev joydev tsdev CPU: 0 EIP: 0060:[<e05c2796>] Tainted: G D VLI EFLAGS: 00010246 (2.6.22.1 #3) EIP is at pl2303_open+0x456/0x9e0 [pl2303] eax: 00000000 ebx: 00000000 ecx: 00000000 edx: c08b1c00 esi: c26e6880 edi: cb48f600 ebp: de91be70 esp: de91be14 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process hald-probe-seri (pid: 4305, ti=de91a000 task=c08f61b0 task.ti=de91a000) Stack: 00000040 00000009 00000000 00000000 00000000 00000064 c0121a10 00000000 df0dca20 00000003 00000000 ce3df800 d16b3200 de91be54 c0262dda 00000000 de91be9c c0263c73 de91be68 c26e6880 cb48f600 c26e6880 ce3df800 de91be9c Call Trace: [<c010521a>] show_trace_log_lvl+0x1a/0x30 [<c01052e1>] show_stack_log_lvl+0xb1/0xe0 [<c01054e2>] show_registers+0x1d2/0x2e0 [<c0105706>] die+0x116/0x280 [<c011e0de>] do_page_fault+0x35e/0x640 [<c034347a>] error_code+0x72/0x78 [<e0625367>] serial_open+0xf7/0x150 [usbserial] [<c0266b0b>] tty_open+0x14b/0x2e0 [<c0181023>] chrdev_open+0xa3/0x190 [<c017cb98>] __dentry_open+0xa8/0x1a0 [<c017cd35>] nameidata_to_filp+0x35/0x40 [<c017cd89>] do_filp_open+0x49/0x50 [<c017cdd9>] do_sys_open+0x49/0xe0 [<c017ceac>] sys_open+0x1c/0x20 [<c01041b6>] sysenter_past_esp+0x5f/0x85 ======================= Code: 28 8b 47 44 ba d0 00 00 00 e8 27 13 aa ff 85 c0 89 c3 0f 85 24 05 00 00 8b 0d 00 68 5c e0 85 c9 0f 85 37 04 00 00 8b 47 24 8b 16 <89> 50 28 8b 47 24 ba d0 00 00 00 e8 fa 12 aa ff 89 c3 31 c0 85 EIP: [<e05c2796>] pl2303_open+0x456/0x9e0 [pl2303] SS:ESP 0068:de91be14 today i compile kernel 2.6.18.4 and all works great! in link, who i gives ( from lists.debian.org ), also says,a problem with huawei in entered after kernel number 2.6.18.4.... Any update with this problem please? Thanks. Problem is in files pl2303.h and option.c, because both have a bindings for this modem. And kernel try to use both. Someone should to delete the product and vendor from one of them. |
Most recent kernel where this bug did not occur: dont know Distribution: mandriva 2007 Hardware Environment:acer travelmate 2413 nwlmi Software Environment: Problem Description: card really not working - comgt lock up after message "search a device" Steps to reproduce: insert huawei e630 card into pcmcia slot there is dmesg output: pccard: CardBus card inserted into slot 0 yenta EnE: chaning testregister 0xC9, 04 -> 04 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Enabling device 0000:07:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 22 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:07:00.0 to 64 ohci_hcd 0000:07:00.0: OHCI Host Controller ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6 ohci_hcd 0000:07:00.0: irq 16, io mem 0x38000000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected PCI: Enabling device 0000:07:00.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:07:00.1 to 64 ohci_hcd 0000:07:00.1: OHCI Host Controller ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 7 ohci_hcd 0000:07:00.1: irq 16, io mem 0x38001000 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 1 port detected usb 6-1: new full speed USB device using ohci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 pl2303 6-1:1.0: pl2303 converter detected usb 6-1: pl2303 converter now attached to ttyUSB0 pl2303 6-1:1.1: pl2303 converter detected usb 6-1: pl2303 converter now attached to ttyUSB1 pl2303 6-1:1.2: pl2303 converter detected usb 6-1: pl2303 converter now attached to ttyUSB2 usbcore: registered new interface driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 BUG: unable to handle kernel NULL pointer dereference at virtual address 0000001c printing eip: e05a58e6 *pde = 00000000 Oops: 0002 [#1] SMP Modules linked in: option pl2303 usbserial ohci_hcd nls_cp437 nls_iso8859_1 smbfs i915 drm snd_seq_dummy nfsd snd_seq_oss snd_seq_midi_event exportfs snd_seq lockd snd_seq_device nfs_acl sunrpc snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore ipv6 8139too mii af_packet ide_cd loop nls_utf8 ntfs dm_mod video thermal processor fan container button battery ac pcmcia yenta_socket rsrc_nonstatic pcmcia_core intel_agp agpgart nvram ehci_hcd uhci_hcd usbcore evdev joydev tsdev CPU: 0 EIP: 0060:[<e05a58e6>] Not tainted VLI EFLAGS: 00010246 (2.6.22.1 #2) EIP is at pl2303_open+0x456/0x9e0 [pl2303] eax: 00000000 ebx: 00000000 ecx: 00000000 edx: c6493800 esi: c9606440 edi: ccba4800 ebp: cc2b7e70 esp: cc2b7e14 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process hald-probe-seri (pid: 22697, ti=cc2b6000 task=cc0ca560 task.ti=cc2b6000) Stack: 00000040 00000009 00000000 00000000 00000000 00000064 cc2b7e4c c0120b80 ceb1b3a0 00000000 00000003 00000000 c0921000 ca255e00 cc2b7e58 c025f24a 00000000 cc2b7e9c c025ff0f c9606440 ccba4800 c9606440 c0921000 cc2b7e9c Call Trace: [<c01050aa>] show_trace_log_lvl+0x1a/0x30 [<c0105171>] show_stack_log_lvl+0xb1/0xe0 [<c0105372>] show_registers+0x1d2/0x2e0 [<c0105594>] die+0x114/0x270 [<c011f09b>] do_page_fault+0x2cb/0x5d0 [<c033cdea>] error_code+0x72/0x78 [<e06952cc>] serial_open+0xfc/0x150 [usbserial] [<c0262f5b>] tty_open+0x14b/0x2e0 [<c017f653>] chrdev_open+0xa3/0x190 [<c017b2ab>] __dentry_open+0xab/0x1a0 [<c017b445>] nameidata_to_filp+0x35/0x40 [<c017b499>] do_filp_open+0x49/0x50 [<c017b4e7>] do_sys_open+0x47/0xd0 [<c017b5ac>] sys_open+0x1c/0x20 [<c0104086>] sysenter_past_esp+0x5f/0x85 ======================= Code: 1c 8b 47 44 ba d0 00 00 00 e8 f7 70 ab ff 85 c0 89 c3 0f 85 24 05 00 00 8b 0d 80 99 5a e0 85 c9 0f 85 37 04 00 00 8b 47 24 8b 16 <89> 50 1c 8b 47 24 ba d0 00 00 00 e8 ca 70 ab ff 89 c3 31 c0 85 EIP: [<e05a58e6>] pl2303_open+0x456/0x9e0 [pl2303] SS:ESP 0068:cc2b7e14 BUG: unable to handle kernel NULL pointer dereference at virtual address 0000001c printing eip: e05a58e6 *pde = 00000000 Oops: 0002 [#2] SMP Modules linked in: option pl2303 usbserial ohci_hcd nls_cp437 nls_iso8859_1 smbfs i915 drm snd_seq_dummy nfsd snd_seq_oss snd_seq_midi_event exportfs snd_seq lockd snd_seq_device nfs_acl sunrpc snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore ipv6 8139too mii af_packet ide_cd loop nls_utf8 ntfs dm_mod video thermal processor fan container button battery ac pcmcia yenta_socket rsrc_nonstatic pcmcia_core intel_agp agpgart nvram ehci_hcd uhci_hcd usbcore evdev joydev tsdev CPU: 0 EIP: 0060:[<e05a58e6>] Not tainted VLI EFLAGS: 00010246 (2.6.22.1 #2) EIP is at pl2303_open+0x456/0x9e0 [pl2303] eax: 00000000 ebx: 00000000 ecx: 00000000 edx: c6493800 esi: c9606500 edi: c25f7a00 ebp: cc2e1e70 esp: cc2e1e14 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process hald-probe-seri (pid: 22733, ti=cc2e0000 task=cfdbfa90 task.ti=cc2e0000) Stack: 00000040 00000009 00000000 00000000 00000000 00000064 cc2e1e4c c0120b80 dcf2ba20 00000000 00000003 00000000 c0922000 ca255e00 cc2e1e58 c025f24a 00000000 cc2e1e9c c025ff0f c9606500 c25f7a00 c9606500 c0922000 cc2e1e9c Call Trace: [<c01050aa>] show_trace_log_lvl+0x1a/0x30 [<c0105171>] show_stack_log_lvl+0xb1/0xe0 [<c0105372>] show_registers+0x1d2/0x2e0 [<c0105594>] die+0x114/0x270 [<c011f09b>] do_page_fault+0x2cb/0x5d0 [<c033cdea>] error_code+0x72/0x78 [<e06952cc>] serial_open+0xfc/0x150 [usbserial] [<c0262f5b>] tty_open+0x14b/0x2e0 [<c017f653>] chrdev_open+0xa3/0x190 [<c017b2ab>] __dentry_open+0xab/0x1a0 [<c017b445>] nameidata_to_filp+0x35/0x40 [<c017b499>] do_filp_open+0x49/0x50 [<c017b4e7>] do_sys_open+0x47/0xd0 [<c017b5ac>] sys_open+0x1c/0x20 [<c0104086>] sysenter_past_esp+0x5f/0x85 ======================= Code: 1c 8b 47 44 ba d0 00 00 00 e8 f7 70 ab ff 85 c0 89 c3 0f 85 24 05 00 00 8b 0d 80 99 5a e0 85 c9 0f 85 37 04 00 00 8b 47 24 8b 16 <89> 50 1c 8b 47 24 ba d0 00 00 00 e8 ca 70 ab ff 89 c3 31 c0 85 EIP: [<e05a58e6>] pl2303_open+0x456/0x9e0 [pl2303] SS:ESP 0068:cc2e1e14 there is lsmod: [root@localhost gazella]# lsmod Module Size Used by option 12544 0 pl2303 22916 2 usbserial 33256 6 option,pl2303 ohci_hcd 23172 0 nls_cp437 9728 3 nls_iso8859_1 8064 3 smbfs 61432 3 i915 25856 2 drm 75668 3 i915 snd_seq_dummy 6788 0 nfsd 213488 17 snd_seq_oss 33152 0 snd_seq_midi_event 10240 1 snd_seq_oss exportfs 8704 1 nfsd snd_seq 50256 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event lockd 63624 2 nfsd snd_seq_device 10636 3 snd_seq_dummy,snd_seq_oss,snd_seq nfs_acl 7040 1 nfsd sunrpc 151932 12 nfsd,lockd,nfs_acl snd_pcm_oss 42272 0 snd_mixer_oss 17920 1 snd_pcm_oss snd_intel8x0 32796 1 snd_ac97_codec 99620 1 snd_intel8x0 ac97_bus 6144 1 snd_ac97_codec snd_pcm 72068 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec snd_timer 22660 2 snd_seq,snd_pcm snd_page_alloc 11656 2 snd_intel8x0,snd_pcm snd 48100 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 9952 1 snd ipv6 249892 18 8139too 25728 0 mii 8704 1 8139too af_packet 24200 2 ide_cd 38688 1 loop 17412 0 nls_utf8 5888 3 ntfs 101568 1 dm_mod 51264 0 video 18440 0 thermal 14856 0 processor 29160 1 thermal fan 7684 0 container 7424 0 button 10128 0 battery 12292 0 ac 7940 0 pcmcia 36780 0 yenta_socket 26892 2 rsrc_nonstatic 14848 1 yenta_socket pcmcia_core 36756 3 pcmcia,yenta_socket,rsrc_nonstatic intel_agp 25364 1 agpgart 31048 3 drm,intel_agp nvram 11400 0 ehci_hcd 33548 0 uhci_hcd 25872 0 usbcore 121224 7 option,pl2303,usbserial,ohci_hcd,ehci_hcd,uhci_hcd evdev 11904 2 joydev 12352 0 tsdev 10560 0 [root@localhost gazella]# there - lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 06:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:09.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) 07:00.0 USB Controller: NEC Corporation USB (rev 43) 07:00.1 USB Controller: NEC Corporation USB (rev 43) i also a serrch in internet,and i found, this problem is http://lists.debian.org/debian-kernel/2007/06/msg00013.html i e a kernel 2.6.18 also have a this problem.