Bug 8370

  
Please try 2.6.21 kernel and the last 'mm' kernel, attach acpidump and  
dmesg output. Please 'cat /proc/acpi/battery/*' few times and attach the 
results. 
 
  

Created attachment 11282 [details]
acpidump with 2.6.20, battery not present

I cannot change kernels at the moment, but I will do some more testing
tomorrow.

 
Please attach 2.6.20 dmesg output. 
 

Created attachment 11288 [details]
dmesg with 2.6.20, battery not present

Created attachment 11293 [details]
dmesg with 2.6.21

Created attachment 11294 [details]
acpidump with 2.6.21, battery not present

Created attachment 11295 [details]
BAT0/* with 2.6.21, battery not present

Created attachment 11296 [details]
acpidump with 2.6.21, after inserting battery in suspend

Created attachment 11297 [details]
BAT0/* with 2.6.21, after inserting battery in suspend

Created attachment 11298 [details]
acpidump with 2.6.21, battery present

Created attachment 11299 [details]
BAT0/* with 2.6.21, battery present

Created attachment 11300 [details]
acpidump with 2.6.21, after removing battery in suspend

Created attachment 11301 [details]
BAT0/* with 2.6.21, after removing battery in suspend

Created attachment 11302 [details]
dmesg with 2.6.21-rc7-mm2

Created attachment 11303 [details]
acpidump with 2.6.21-rc7-mm2, after removing battery in suspend

Created attachment 11304 [details]
BAT0/* with 2.6.21-rc7-mm2, after removing battery in suspend

In this case, ACPI seems to actually notice the battery is missing, which did
not happen in 2.6.20 or 2.6.21. When inserting the battery during suspend with
2.6.21-rc7-mm2, the behavior looks just like 2.6.21 to me. If you want me to
attach the other acpidumps for the mm kernel as well, let me know.

Please perform the following testing:

a)
remove battery
suspend
insert battery
resume
cat /proc/acpi/battery/*/* and /proc/acpi/ac_adapter/*/*
unplug/plug AC cable
cat /proc/acpi/battery/*/* and /proc/acpi/ac_adapter/*/*
send 'cat' output and dmesg

b)
remove battery
suspend
insert battery
resume
cat /proc/acpi/battery/*/* and /proc/acpi/ac_adapter/*/*
wait for 5 minutes
cat /proc/acpi/battery/*/* and /proc/acpi/ac_adapter/*/*
send 'cat' output and dmesg

Please test both kernels - 2.6.21 and 2.6.21-rc7-mm2.

Please test with 2.6.21, 2.6.22-rc*, or something later.
If this issue still exists, please re-open this bug report.

Created attachment 11557 [details]
first test from comment #17 (2.6.21)

Created attachment 11558 [details]
second test from comment #17 (2.6.21)

Comment on attachment 11557 [details]
first test from comment #17 (2.6.21)

test passed

Comment on attachment 11558 [details]
second test from comment #17 (2.6.21)

test failed

Can you please try 2.6.22-rc3 with the patchset from
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/ applied?

Created attachment 11676 [details]
output of patch -p1

For some strange reason some of the patches failagainst a vanilla 2.6.22-rc3.
Should I apply them anyway?

Comment on attachment 11676 [details]
output of patch -p1

Sorry, too dumb to patch. I'll be testing it now.

Created attachment 11678 [details]
first test

Again, the battery is only detected after toggling the AC adaptor

Created attachment 11679 [details]
second test

Battery is not detected at all.

To me (dummy), everything looks the same as with 2.6.21.

Can you please try the 2.6.23-rc2 kernel?

Please reopen this bug if it's still present with kernel 2.6.23-rc6.