Bug 8179

Summary:	Yuan ub300 card not working/tuning
Product:	v4l-dvb	Reporter:	Kurt Heine (kheine7)
Component:	dvb-usb	Assignee:	dvb-usb (v4l-dvb_dvb-usb)
Status:	CLOSED OBSOLETE
Severity:	high	CC:	alan, protasnb
Priority:	P2
Hardware:	i386
OS:	Linux
Kernel Version:	2.6.21	Subsystem:
Regression:	No	Bisected commit-id:

Description Kurt Heine 2007-03-12 01:04:26 UTC

Most recent kernel where this bug did *NOT* occur:
Distribution: Fedora Core 6
Hardware Environment: Yuan USB2GO UB300
Software Environment: dvb-apps-1.1.1-7.fc6
Problem Description:
I cannot get the usb dvb device to tune/work.  I am not sure but I get the
following error message in the /var/log/messages :

Mar 12 18:55:19 localhost kernel: usb 2-2: new high speed USB device using
ehci_hcd and address 24
Mar 12 18:55:19 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice
Mar 12 18:55:19 localhost kernel: dvb-usb: found a
'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in cold state, will
try to load a firmware
Mar 12 18:55:19 localhost kernel: dvb-usb: downloading firmware from file
'dvb-usb-dtt200u-01.fw'
Mar 12 18:55:20 localhost kernel: usb 2-2: USB disconnect, address 24
Mar 12 18:55:20 localhost kernel: dvb-usb: generic DVB-USB module successfully
deinitialized and disconnected.
Mar 12 18:55:22 localhost kernel: usb 2-2: new high speed USB device using
ehci_hcd and address 25
Mar 12 18:55:22 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice
Mar 12 18:55:22 localhost kernel: dvb-usb: found a
'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in warm state.
Mar 12 18:55:22 localhost kernel: dvb-usb: will use the device's hardware PID
filter (table count: 15).
Mar 12 18:55:22 localhost kernel: DVB: registering new adapter
(WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)).
Mar 12 18:55:22 localhost kernel: DVB: registering frontend 0 (WideView USB
DVB-T)...
Mar 12 18:55:22 localhost kernel: input: IR-receiver inside an USB DVB receiver
as /class/input/input7
Mar 12 18:55:22 localhost kernel: dvb-usb: schedule remote query interval to 300
msecs.
Mar 12 18:55:22 localhost kernel: dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon
DVB-T USB2.0 (WT-200U) successfully initialized and connected.
Mar 12 18:55:22 localhost kernel: dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon
DVB-T USB2.0 (WT-200U) successfully deinitialized and disconnected.
[root@localhost firmware]# Mar 12 18:55:54 localhost kernel: usb 2-2: reset high
speed USB device using ehci_hcd and address 25
Mar 12 18:55:55 localhost kernel: dvb-usb: found a
'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in warm state.
Mar 12 18:55:55 localhost kernel: dvb-usb: will use the device's hardware PID
filter (table count: 15).
Mar 12 18:55:55 localhost kernel: DVB: registering new adapter
(WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)).
Mar 12 18:55:55 localhost kernel: DVB: registering frontend 0 (WideView USB
DVB-T)...
Mar 12 18:55:55 localhost kernel: input: IR-receiver inside an USB DVB receiver
as /class/input/input8
Mar 12 18:55:55 localhost kernel: dvb-usb: schedule remote query interval to 300
msecs.
Mar 12 18:55:55 localhost kernel: dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon
DVB-T USB2.0 (WT-200U) successfully initialized and connected.
[root@localhost firmware]# Mar 12 18:55:57 localhost kernel: dvb-usb: recv bulk

When I try to tune the card I get the following from using scandvb /tmp/au-Hobart :

scandvb /tmp/au-Hobart 
scanning /tmp/au-Hobart
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 191625000 1 3 3 3 1 1 0
initial transponder 205500000 1 2 2 3 1 2 0
initial transponder 212500000 1 3 3 3 1 1 0
initial transponder 184500000 1 3 3 3 1 2 0
initial transponder 219500000 1 3 3 3 1 2 0
>>> tune to:
191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
212500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
212500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
184500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
184500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


Steps to reproduce:
Plug in USB device, then use scandvb /tmp/au-Hobart

Comment 1 Olaf Kirch 2007-04-12 03:26:43 UTC

I don't think this really deserves blocker status

Comment 2 Natalie Protasevich 2007-06-21 22:55:13 UTC

Lowering to high :) 
Kurt, can you please test with latest 2.6.22-rc5.
Olaf, what else do you think you need from Kurt so he can help with further debugging?
Thanks.

Comment 3 Kurt Heine 2007-07-17 15:36:16 UTC

OK I am using Fedora 7 now and I still get the same problem.  Here is the error message again.

Jul 18 08:27:35 localhost kernel: usb 2-4: new high speed USB device using ehci_hcd and address 10
Jul 18 08:27:35 localhost kernel: usb 2-4: configuration #1 chosen from 1 choice
Jul 18 08:27:35 localhost kernel: dvb-usb: found a 'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in warm state.
Jul 18 08:27:35 localhost kernel: dvb-usb: will use the device's hardware PID filter (table count: 15).
Jul 18 08:27:35 localhost kernel: DVB: registering new adapter (WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)).
Jul 18 08:27:35 localhost kernel: DVB: registering frontend 0 (WideView USB DVB-T)...
Jul 18 08:27:35 localhost kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input6
Jul 18 08:27:35 localhost kernel: dvb-usb: schedule remote query interval to 300 msecs.
Jul 18 08:27:35 localhost kernel: dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U) successfully initialized and connected.
Jul 18 08:27:37 localhost kernel: dvb-usb: recv bulk message failed: -110

Kernel version = 2.6.21-1.3228.fc7

Comment 4 Alan 2012-05-14 17:05:17 UTC

Closing as obsolete, if this is incorrect please re-open