Bug 8135

Summary: Sitecom CN-103 USB to Printer cable adapter doesn't work
Product: Drivers Reporter: Matthias (matthias_berndt)
Component: USBAssignee: Greg Kroah-Hartman (greg)
Status: REJECTED INSUFFICIENT_DATA    
Severity: normal CC: bunk, protasnb
Priority: P2    
Hardware: i386   
OS: Linux   
Kernel Version: 2.6.18.2 Subsystem:
Regression: --- Bisected commit-id:
Bug Depends on:    
Bug Blocks: 5089    

Description Matthias 2007-03-06 09:31:15 UTC
Distribution: Opensuse 10.2
Hardware Environment: normal x86 PC (Asus A7V880 Motherboard), Kyocera FS-600
Printer, Sitecom CN-103 USB to Printer Cable Adapter (product home page:
http://www.sitecom.com/product.php?productname=USB+to+printer+cable+%96+1.8m&productcode=CN-103&productid=30&subgroupid=20
)
Software Environment: CUPS 1.2.7, hpijs 1.7.1, vanilla kernel provided in the
opensuse 10.2 repositories

Problem Description: 
When I plug in the adapter, it is being detected and the usblp kernel module is
loaded. hwinfo --usb says that it found a "Prolific IEEE-1284 Controller", so
everything looks good.
The printer works fine on the "real" parallel port, but it doesn't with the USB
Adapter. When i try to print a test page, i first have to wait for a few minutes
 and then only the top 15% or so of the page will actually be printed (the rest
is left blank). 

I have also tried this with the Sidux Live CD (2.6.20 kernel), but it behaves in
exactly the same way.
Comment 1 Anonymous Emailer 2007-03-06 14:20:45 UTC
Reply-To: akpm@linux-foundation.org



Begin forwarded message:

Date: Tue, 6 Mar 2007 09:31:18 -0800
From: bugme-daemon@bugzilla.kernel.org
To: bugme-new@lists.osdl.org
Subject: [Bugme-new] [Bug 8135] New: Sitecom CN-103 USB to Printer cable adapter doesn't work


http://bugzilla.kernel.org/show_bug.cgi?id=8135

           Summary: Sitecom CN-103 USB to Printer cable adapter doesn't work
    Kernel Version: 2.6.18.2
            Status: NEW
          Severity: normal
             Owner: greg@kroah.com
         Submitter: matthias_berndt@gmx.de


Distribution: Opensuse 10.2
Hardware Environment: normal x86 PC (Asus A7V880 Motherboard), Kyocera FS-600
Printer, Sitecom CN-103 USB to Printer Cable Adapter (product home page:
http://www.sitecom.com/product.php?productname=USB+to+printer+cable+%96+1.8m&productcode=CN-103&productid=30&subgroupid=20
)
Software Environment: CUPS 1.2.7, hpijs 1.7.1, vanilla kernel provided in the
opensuse 10.2 repositories

Problem Description: 
When I plug in the adapter, it is being detected and the usblp kernel module is
loaded. hwinfo --usb says that it found a "Prolific IEEE-1284 Controller", so
everything looks good.
The printer works fine on the "real" parallel port, but it doesn't with the USB
Adapter. When i try to print a test page, i first have to wait for a few minutes
 and then only the top 15% or so of the page will actually be printed (the rest
is left blank). 

I have also tried this with the Sidux Live CD (2.6.20 kernel), but it behaves in
exactly the same way.

------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

Comment 2 Natalie Protasevich 2007-06-13 23:59:13 UTC
Could you please try:
latest vanilla kernel (2.6.22-rc4)
raising debug level on the system (dmesg -n 7) and compiling the kernel with USB debug.
Can you also check if any messages in the /var/log/messages or dmesg and attach those (both while you connect the printer and when you start printing).
Thanks.
Comment 3 Adrian Bunk 2007-09-06 13:50:33 UTC
Please reopen this bug if:
- it is still present with kernel 2.6.22 and
- you can provide the requested information.