Bug 6201
| Summary: | usb2 ehci and nforce4 don't work together. | ||
|---|---|---|---|
| Product: | Drivers | Reporter: | Han Boetes (han) |
| Component: | USB | Assignee: | David Brownell (dbrownell) |
| Status: | RESOLVED CODE_FIX | ||
| Severity: | normal | CC: | greg |
| Priority: | P2 | ||
| Hardware: | i386 | ||
| OS: | Linux | ||
| Kernel Version: | 2.6.15.6 | Subsystem: | |
| Regression: | --- | Bisected commit-id: | |
| Bug Depends on: | |||
| Bug Blocks: | 5089 | ||
| Attachments: | updated NVidia bug workaround | ||
|
Description
Han Boetes
2006-03-09 12:35:25 UTC
On Thu, Mar 09, 2006 at 12:35:26PM -0800, bugme-daemon@bugzilla.kernel.org wrote: > > Most recent kernel where this bug did not occur: reports on lkml > mention usb2 and nforce4 stopped working since about 2.6.10 Can you try 2.6.16-rc5 to see if that fixes this problem for you? Allas, it does not: Here is the dmesg diff between ehci on 2.6.15.6 and 2.6.16-rc5 --- dmesg_ehci 2006-03-09 21:21:17.896919160 +0100 +++ dmesg_ehci_216rc5 2006-03-09 22:25:27.727024784 +0100 @@ -1,4 +1,4 @@ -Linux version 2.6.15.6 (han@marsupilami) (gcc version 3.4.5 (CRUX with propolice)) #4 Thu Mar 9 21:17:41 CET 2006 +Linux version 2.6.16-rc5 (han@marsupilami) (gcc version 3.4.5 (CRUX with propolice)) #1 Thu Mar 9 22:21:18 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) @@ -24,19 +24,22 @@ ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9740 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9440 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 +ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists -Kernel command line: auto BOOT_IMAGE=26156 ro root=305 +Kernel command line: BOOT_IMAGE=2616rc5 ro root=305 +Enabling fast FPU save and restore... done. +Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) -Detected 2010.126 MHz processor. -Using tsc for high-res timesource +Detected 2010.300 MHz processor. +Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -Memory: 1035488k/1048512k available (2318k kernel code, 12428k reserved, 723k data, 140k init, 131008k highmem) +Memory: 1035396k/1048512k available (2302k kernel code, 12448k reserved, 747k data, 140k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. -Calibrating delay using timer specific routine.. 4023.24 BogoMIPS (lpj=2011623) +Calibrating delay using timer specific routine.. 4026.84 BogoMIPS (lpj=2013423) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 @@ -45,10 +48,7 @@ CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. -mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02 -Enabling fast FPU save and restore... done. -Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. ACPI: setting ELCR to 0200 (from 0cb8) @@ -56,7 +56,7 @@ ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5 PCI: Using MMCONFIG -ACPI: Subsystem revision 20050902 +ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) @@ -105,12 +105,12 @@ usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report -pnp: 00:00: ioport range 0x4000-0x407f could not be reserved -pnp: 00:00: ioport range 0x4080-0x40ff has been reserved -pnp: 00:00: ioport range 0x4400-0x447f has been reserved -pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved -pnp: 00:00: ioport range 0x4800-0x487f has been reserved -pnp: 00:00: ioport range 0x4880-0x48ff has been reserved +pnp: 00:01: ioport range 0x4000-0x407f could not be reserved +pnp: 00:01: ioport range 0x4080-0x40ff has been reserved +pnp: 00:01: ioport range 0x4400-0x447f has been reserved +pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved +pnp: 00:01: ioport range 0x4800-0x487f has been reserved +pnp: 00:01: ioport range 0x4880-0x48ff has been reserved PCI: Bridge: 0000:00:09.0 IO window: d000-dfff MEM window: d8000000-d9ffffff @@ -138,36 +138,36 @@ PCI: Setting latency timer of device 0000:00:0e.0 to 64 Machine check exception polling timer started. highmem bounce pool size: 64 pages -JFS: nTxBlock = 8091, nTxLock = 64731 +JFS: nTxBlock = 8091, nTxLock = 64729 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered -io scheduler cfq registered +io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability -Allocate Port Service[pcie00] -Allocate Port Service[pcie03] +Allocate Port Service[0000:00:0b.0:pcie00] +Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability -Allocate Port Service[pcie00] -Allocate Port Service[pcie03] +Allocate Port Service[0000:00:0c.0:pcie00] +Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability -Allocate Port Service[pcie00] -Allocate Port Service[pcie03] +Allocate Port Service[0000:00:0d.0:pcie00] +Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability -Allocate Port Service[pcie00] -Allocate Port Service[pcie03] +Allocate Port Service[0000:00:0e.0:pcie00] +Allocate Port Service[0000:00:0e.0:pcie03] ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) -Real Time Clock Driver v1.12 +Real Time Clock Driver v1.12ac PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 @@ -210,7 +210,6 @@ ehci_hcd 0000:00:02.1: park 0 ehci_hcd 0000:00:02.1: bogus port configuration: cc=1 x pcc=4 < ports=10 ehci_hcd 0000:00:02.1: debug port 1 -ehci_hcd 0000:00:02.1: capability 0001 at a0 PCI: cache line size of 64 is not supported by device 0000:00:02.1 drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' @@ -222,11 +221,13 @@ usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller -usb usb1: Manufacturer: Linux 2.6.15.6 ehci_hcd +usb usb1: Manufacturer: Linux 2.6.16-rc5 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 -usb usb1: hotplug +usb usb1: uevent +usb usb1: device is self-powered +usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) -usb 1-0:1.0: hotplug +usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found @@ -238,7 +239,7 @@ hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good -hub 1-0:1.0: state 5 ports 10 chg 0000 evt 0000 +hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' Initializing USB Mass Storage driver... ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT @@ -259,7 +260,7 @@ i2c /dev entries driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 -Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC). +Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC). usbcore: registered new driver snd-usb-audio ALSA device list: No soundcards found. @@ -281,9 +282,5 @@ VFS: Mounted root (jfs filesystem) readonly. Freeing unused kernel memory: 140k freed input: AT Translated Set 2 keyboard as /class/input/input0 -nvidia: module license 'NVIDIA' taints kernel. -ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 -PCI: Setting latency timer of device 0000:01:00.0 to 64 -NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 Adding 257000k swap on /dev/hda6. Priority:-1 extents:1 across:257000k r8169: eth0: link up David, this looks like one for you... I am having similar problems with ehci_hcd on a nforce4 ultra board running a 64-bit kernel (gentoo distribution). I am unable to use any USB2 storage devices with ehci_hcd driver. In my case: 1) everything works perefectly on 2.6.14.7 2) every kernel I tried from 2.6.15 to 2.6.16-rc6 gives the same errors 3) everything works fine with ohci_hcd driver (when I unload the ehci_hcd module) The error messages from dmesg are slightly different, a dmesg dump follows (USB errors at the very end): Thanks, Jan Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) Checking aperture... CPU 0: aperture @ 2096000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/sda4 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2814.470 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 3350200k/3407808k available (2560k kernel code, 56980k reserved, 968k data, 188k init) Calibrating delay using timer specific routine.. 5634.84 BogoMIPS (lpj=11269680) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) 64 FX-57 Processor stepping 01 Using local APIC timer interrupts. Detected 12.564 MHz APIC timer. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at d0000000 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:05:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. pnp: 00:00: ioport range 0x1000-0x107f could not be reserved pnp: 00:00: ioport range 0x1080-0x10ff has been reserved pnp: 00:00: ioport range 0x1400-0x147f has been reserved pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved pnp: 00:00: ioport range 0x1800-0x187f has been reserved pnp: 00:00: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: f4000000-f40fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: 9000-9fff MEM window: f2000000-f3ffffff PREFETCH window: f4200000-f42fffff PCI: Bridge: 0000:00:0c.0 IO window: 8000-8fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: 7000-7fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: a000-afff MEM window: f0000000-f1ffffff PREFETCH window: e0000000-efffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Total HugeTLB memory allocated, 0 Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 GSI 16 sharing vector 0xD9 and IRQ 16 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:0a.0 to 64 eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 162 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. sata_nv 0000:00:07.0: version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 GSI 17 sharing vector 0xE1 and IRQ 17 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 225 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 225 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:407f ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: no device found (phy stat 00000000) scsi1 : sata_nv Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 GSI 18 sharing vector 0xE9 and IRQ 18 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xE000 irq 233 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xE008 irq 233 ata3: no device found (phy stat 00000000) scsi2 : sata_nv ata4: no device found (phy stat 00000000) scsi3 : sata_nv SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda Fusion MPT base driver 3.03.04 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.04 usbmon: debugfs is not available usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x6 (1400 mV) powernow-k8: 1 : fid 0x4 (1200 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0x14, vid 0x6 ACPI wakeup devices: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 ACPI: (supports S0 S1 S4 S5) ReiserFS: sda4: found reiserfs format "3.6" with standard journal input: ImPS/2 Generic Wheel Mouse as /class/input/input1 ReiserFS: sda4: using ordered data mode ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda4: checking transaction log (sda4) ReiserFS: sda4: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 188k freed Adding 4891784k swap on /dev/sda2. Priority:-1 extents:1 across:4891784k ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: Using r5 hash to sort names ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 GSI 19 sharing vector 0x32 and IRQ 19 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 54747 usecs intel8x0: clocking to 46926 eth0: no IPv6 routers present ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 217, io mem 0xf4101000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected usb 1-1: new full speed USB device using ohci_hcd and address 2 scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 1-9: new low speed USB device using ohci_hcd and address 3 hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o2 .I USB FW:o2 ] on usb-0000:00:02.0-9 Vendor: IC25T048 Model: ATDA05-0 Rev: DA8O Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 93759120 512-byte hdwr sectors (48005 MB) sdb: assuming drive cache: write through SCSI device sdb: 93759120 512-byte hdwr sectors (48005 MB) sdb: assuming drive cache: write through sdb: sdb1 sdb2 sd 4:0:0:0: Attached scsi disk sdb usb-storage: device scan complete usb 1-1: USB disconnect, address 2 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: irq 225, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-9: USB disconnect, address 3 usb 1-9: new low speed USB device using ohci_hcd and address 4 hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o2 .I USB FW:o2 ] on usb-0000:00:02.0-9 usb 2-1: new high speed USB device using ehci_hcd and address 3 usb 2-1: device descriptor read/64, error -110 usb 2-1: device descriptor read/64, error -110 usb 2-1: new high speed USB device using ehci_hcd and address 4 usb 2-1: device descriptor read/64, error -110 usb 2-1: device descriptor read/64, error -110 usb 2-1: new high speed USB device using ehci_hcd and address 5 usb 2-1: device descriptor read/8, error -110 usb 2-1: device descriptor read/8, error -110 usb 2-1: new high speed USB device using ehci_hcd and address 6 usb 2-1: device descriptor read/8, error -110 usb 2-1: device descriptor read/8, error -110 The very first problem description looks like operator error, in that the two devices were full and low speed, and so they needed to go to a companion controller (OHCI) ... but you did not load the relevant driver (ohci-hcd). What was listed there was completely correct for that operator-error case. If you load first ehci-hcd, and then ohci-hcd, does it all work? It does on my hardware. (NF2, NF3 are both handy.) There's also a completely unrelated problem listed in Comment #4. That might be worth a separate bug report, and I'd hope that you might consider using a "git bisect" to find the problem. In general, remember that you should first load ehci-hcd, and then load ohci-hcd afterwards. Some hardware misbehaves if the order is reversed (as done in Comment #4) although that should not matter. My udev setup is kind of broken, so if I compile the usb-drivers as modules hotplug won't pick them up. So I am unable to test this. I just use a static kernel. Created attachment 8297 [details]
updated NVidia bug workaround
This should help with the problem in #4 ... it's already in the merge queue.
Yup, that fixes it. Now if only I could get hotplug to work, or even udev to find that device :-S Here is the dmesg: I Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved PCI: Bridge: 0000:00:09.0 IO window: d000-dfff MEM window: d8000000-d9ffffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: d0000000-d7ffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. highmem bounce pool size: 64 pages JFS: nTxBlock = 8089, nTxLock = 64718 Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 eth0: Identified chip type is 'RTL8169s/8110s'. eth0: RTL8169 at 0xf8804000, 00:08:a1:3c:34:79, IRQ 11 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ST340823A, ATA DISK drive hdb: ST38410A, ATA DISK drive Probing IDE interface ide1... hdc: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/512KiB Cache, CHS=65535/16/63 hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hdb: max request size: 128KiB hdb: 16841664 sectors (8622 MB) w/512KiB Cache, CHS=16708/16/63 hdb: cache flushes not supported hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 > hdc: ATAPI 48X DVD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 3 (level, low) -> IRQ 3 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: reset hcs_params 0x10148a dbg=1 cc=1 pcc=4 !ppc ports=10 ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0 ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park ehci_hcd 0000:00:02.1: park 0 ehci_hcd 0000:00:02.1: bogus port configuration: cc=1 x pcc=4 < ports=10 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: supports USB remote wakeup ehci_hcd 0000:00:02.1: irq 3, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.17-rc6 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 usb usb1: uevent usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller drivers/usb/core/inode.c: creating file '002' ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: created debug files ohci_hcd 0000:00:02.0: irq 7, io mem 0xda001000 ohci_hcd 0000:00:02.0: resetting from state 'reset', control = 0x600 ohci_hcd 0000:00:02.0: OHCI controller state ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:02.0: intrenable 0x8000000a MIE RD WDH ohci_hcd 0000:00:02.0: hcca frame #0003 ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10) ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.17-rc6 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb usb2: uevent usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 drivers/usb/core/inode.c: creating file '001' Initializing USB Mass Storage driver... ehci_hcd 0000:00:02.1: port 1 high speed ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 1-1: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:02.1: port 1 high speed ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 1-1: default language 0x0409 usb 1-1: new device strings: Mfr=56, Product=78, SerialNumber=100 usb 1-1: Product: USB2.0 Storage Device usb 1-1: Manufacturer: Cypress Semiconductor usb 1-1: SerialNumber: 100000061545 usb 1-1: uevent usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: uevent drivers/usb/core/inode.c: creating file '002' ehci_hcd 0000:00:02.1: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s ohci_hcd 0000:00:02.0: suspend root hub hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:02.1: port 2 low speed --> companion ehci_hcd 0000:00:02.1: GetStatus port 2 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000, resume root ohci_hcd 0000:00:02.0: wakeup hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s usb-storage 1-1:1.0: usb_probe_interface usb-storage 1-1:1.0: usb_probe_interface - got id scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS usb 2-2: new low speed USB device using ohci_hcd and address 2 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS usb 2-2: skipped 1 descriptor after interface usb 2-2: default language 0x0409 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: USB-PS/2 Optical Mouse usb 2-2: Manufacturer: B16_b_02 usb 2-2: uevent usb 2-2: configuration #1 chosen from 1 choice usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent drivers/usb/core/inode.c: creating file '002' hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0004 usbhid 2-2:1.0: usb_probe_interface usbhid 2-2:1.0: usb_probe_interface - got id HID Mouse 0xc024 forced to 2 ms polling input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input0 input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC). ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10 ALSA device list: #0: SBLive! Platinum [CT4760P] (rev.7, serial:0x80401102) at 0xd000, irq 10 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 CCID: Registered CCID 3 (ccid3) CCID: Registered CCID 2 (ccid2) Using IPI Shortcut mode ACPI wakeup devices: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI ACPI: (supports S0 S1 S3 S4 S5) UDF-fs: No VRS found VFS: Mounted root (jfs filesystem) readonly. Freeing unused kernel memory: 144k freed input: AT Translated Set 2 keyboard as /class/input/input1 Adding 257000k swap on /dev/hda6. Priority:-1 extents:1 across:257000k Vendor: QUANTUM Model: FIREBALL CX10.2A Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 20044080 512-byte hdwr sectors (10263 MB) sda: Write Protect is off sda: Mode Sense: 33 00 00 00 sda: assuming drive cache: write through SCSI device sda: 20044080 512-byte hdwr sectors (10263 MB) sda: Write Protect is off sda: Mode Sense: 33 00 00 00 sda: assuming drive cache: write through sda: sda4 sd 0:0:0:0: Attached scsi disk sda usb-storage: device scan complete r8169: eth0: link up nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006 Comment #8 sez this has been fixed now... |