Bug 4911
| Summary: | Temp and voltages readings -- _TMP -- AE_TIME - Acer Aspire 5020 | ||
|---|---|---|---|
| Product: | ACPI | Reporter: | daniel |
| Component: | Other | Assignee: | Luming Yu (luming.yu) |
| Status: | REJECTED DUPLICATE | ||
| Severity: | normal | CC: | acpi-bugzilla |
| Priority: | P2 | ||
| Hardware: | i386 | ||
| OS: | Linux | ||
| Kernel Version: | 2.6.11-6 | Subsystem: | |
| Regression: | --- | Bisected commit-id: | |
Still an issue in 2.6.13-rc3? If yes, is this an issue that has been present forever on this system, or did a previous kernel not have this issue? |
Distribution:Mandriva limited edition Hardware Environment: Acer Aspire 5020 Software Environment: Linux Problem Description: No reading of temp, voltages, battery charge Steps to reproduce: Here as the output you requested dg@newdg ~]$ dmidecode # dmidecode 2.6 /dev/mem: Permission denied [dg@newdg ~]$ su Password: [root@newdg dg]# dmodecode bash: dmodecode: command not found [root@newdg dg]# dmidecode # dmidecode 2.6 SMBIOS 2.3 present. 37 structures occupying 944 bytes. Table at 0x000DC010. Handle 0x0000 DMI type 0, 20 bytes. BIOS Information Vendor: Phoenix Version: V1.07 Release Date: 05/06/2005 Address: 0xE7980 Runtime Size: 99968 bytes ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PC Card (PCMCIA) is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available ACPI is supported USB legacy is supported Smart battery is supported BIOS boot specification is supported Handle 0x0001 DMI type 1, 25 bytes. System Information Manufacturer: Acer Product Name: Aspire 5020 Version: -1 Serial Number: LXA4605052523002ADKS00 UUID: E23BC420-D78B-11D9-B5F8-B7CCA7D65F67 Wake-up Type: Power Switch Handle 0x0002 DMI type 2, 8 bytes. Base Board Information Manufacturer: Acer Product Name: Aspire 5020 Version: Rev.A Serial Number: LXA4605052523002ADKS00 Handle 0x0003 DMI type 3, 17 bytes. Chassis Information Manufacturer: N/A Type: Notebook Lock: Not Present Version: N/A Serial Number: None Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00001234 Handle 0x0004 DMI type 4, 32 bytes. Processor Information Socket Designation: Socket 754 Type: Central Processor Family: Athlon 64 Manufacturer: AMD ID: 42 0F 02 00 FF FB 8B 07 Signature: Extended Family 0, Model 4, Stepping 2 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: C0 Voltage: 3.3 V External Clock: 800 MHz Max Speed: 2500 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: Socket 754 L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Handle 0x0005 DMI type 5, 20 bytes. Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: Other Supported Interleave: Two-way Interleave Current Interleave: Two-way Interleave Maximum Memory Module Size: 2048 MB Maximum Total Memory Size: 4096 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: Standard DIMM SDRAM Memory Module Voltage: 3.3 V Associated Memory Slots: 2 0x0001 0x0002 Enabled Error Correcting Capabilities: Single-bit Error Correcting Handle 0x0006 DMI type 6, 12 bytes. Memory Module Information Socket Designation: DIMM 1 Bank Connections: 0 1 Current Speed: 60 ns Type: DIMM SDRAM Installed Size: 256 MB (Single-bank Connection) Enabled Size: 256 MB (Single-bank Connection) Error Status: OK Handle 0x0007 DMI type 6, 12 bytes. Memory Module Information Socket Designation: DIMM 2 Bank Connections: 2 3 Current Speed: 60 ns Type: DIMM SDRAM Installed Size: 256 MB (Single-bank Connection) Enabled Size: 256 MB (Single-bank Connection) Error Status: OK Handle 0x0008 DMI type 7, 19 bytes. Cache Information Socket Designation: L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 64 KB Maximum Size: 64 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009 DMI type 7, 19 bytes. Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Through Location: External Installed Size: 1024 KB Maximum Size: 1024 KB Supported SRAM Types: Burst Pipeline Burst Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Primary IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000B DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Secondary IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000C DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: COM2 External Connector Type: DB-9 male Port Type: Serial Port XT/AT Compatible Handle 0x000D DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: KBD External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000E DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x000F DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: CD_IN Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0010 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: MIC_IN External Connector Type: RJ-11 Port Type: MIDI Port Handle 0x0011 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: LINE_IN External Connector Type: RJ-11 Port Type: MIDI Port Handle 0x0012 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: LINE_OUT External Connector Type: RJ-11 Port Type: MIDI Port Handle 0x0013 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FC Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: MIDI Port Handle 0x0014 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: USB1 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: USB Handle 0x0015 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: USB2 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: USB Handle 0x0016 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: USB3 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: USB Handle 0x0017 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: USB4 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: USB Handle 0x0018 DMI type 9, 13 bytes. System Slot Information Designation: PCI Slot 1 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0019 DMI type 9, 13 bytes. System Slot Information Designation: PCI Slot 2 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001A DMI type 10, 6 bytes. On Board Device Information Type: Sound Status: Disabled Description: ATI Sound Handle 0x001B DMI type 11, 5 bytes. OEM Strings String 1: ATI String 2: www.ati.com Handle 0x001C DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x001D DMI type 17, 23 bytes. Memory Device Array Handle: 0x001C Error Information Handle: No Error Total Width: 32 bits Data Width: 32 bits Size: 256 MB Form Factor: DIMM Set: 1 Locator: S1 Bank Locator: Bank 1 Type: DRAM Type Detail: Synchronous Speed: Unknown Handle 0x001E DMI type 17, 23 bytes. Memory Device Array Handle: 0x001C Error Information Handle: No Error Total Width: 32 bits Data Width: 32 bits Size: 256 MB Form Factor: DIMM Set: 2 Locator: S2 Bank Locator: Bank 2 Type: DRAM Type Detail: Synchronous Speed: Unknown Handle 0x001F DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Array Handle: 0x001C Partition Width: 0 Handle 0x0020 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000FFFFFFF Range Size: 256 MB Physical Device Handle: 0x001D Memory Array Mapped Address Handle: 0x0001 Partition Row Position: 1 Handle 0x0021 DMI type 23, 13 bytes. System Reset Status: Enabled Watchdog Timer: Present Boot Option: Do Not Reboot Boot Option On Limit: Do Not Reboot Reset Count: Unknown Reset Limit: Unknown Timer Interval: Unknown Timeout: Unknown Handle 0x0022 DMI type 24, 5 bytes. Hardware Security Power-On Password Status: Disabled Keyboard Password Status: Unknown Administrator Password Status: Enabled Front Panel Reset Status: Unknown Handle 0x0023 DMI type 32, 20 bytes. System Boot Information Status: <OUT OF SPEC> Handle 0x0024 DMI type 127, 4 bytes. End Of Table [root@newdg dg]# acpidmp bash: acpidmp: command not found [root@newdg dg]# dmesg -s4000 dler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node dfe80540), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node dfe80440), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZSV._TMP] (Node dfe80320), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node dfe80540), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node dfe80440), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZSV._TMP] (Node dfe80320), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node dfe80540), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node dfe80440), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZSV._TMP] (Node dfe80320), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node dfe80540), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node dfe80440), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZSV._TMP] (Node dfe80320), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node dfe80540), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node dfe80440), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZSV._TMP] (Node dfe80320), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node dfe80540), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node dfe80440), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZSV._TMP] (Node dfe80320), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node dfe80540), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node dfe80440), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZSV._TMP] (Node dfe80320), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node dfe80540), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node dfe80440), AE_TIME ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_TZ_.TZSV._TMP] (Node dfe80320), AE_TIME [root@newdg dg]# lspci -vv 00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 01) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 00:02.0 PCI bridge: ATI Technologies Inc: Unknown device 5a34 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 08 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: c0100000-c01fffff Prefetchable memory behind bridge: c8000000-cfffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #10 [0041] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] #0d [0000] Capabilities: [b8] #08 [a803] 00:06.0 PCI bridge: ATI Technologies Inc: Unknown device 5a38 (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 08 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00000000-00000fff Memory behind bridge: 00000000-000fffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #10 [0041] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] #0d [0000] Capabilities: [b8] #08 [a803] 00:07.0 PCI bridge: ATI Technologies Inc: Unknown device 5a39 (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 I/O behind bridge: 00000000-00000fff Memory behind bridge: 00000000-000fffff BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #10 [0041] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] #0d [0000] Capabilities: [b8] #08 [a803] 00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374 (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 10 Interrupt: pin A routed to IRQ 19 Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375 (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 10 Interrupt: pin A routed to IRQ 19 Region 0: Memory at c0001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373 (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 10 Interrupt: pin A routed to IRQ 19 Region 0: Memory at c0002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 11) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at 8400 [size=16] Region 1: Memory at c0003000 (32-bit, non-prefetchable) [size=1K] Capabilities: [b0] #08 [a802] 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (prog-if 8a [Master SecP PriP]) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at 8410 [size=16] Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377 Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371 (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=06, subordinate=06, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: c0200000-c02fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown device 4370 (rev 02) Subsystem: Acer Incorporated [ALI]: Unknown device 0079 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min), cache line size 08 Interrupt: pin B routed to IRQ 17 Region 0: Memory at c0003400 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 02) (prog-if 00 [Generic]) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 0: Memory at c0003800 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] #08 [2101] 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5653 (prog-if 00 [VGA]) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 9000 [size=256] Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #10 [0001] Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 06:05.0 Network controller: Broadcom Corporation: Unknown device 4318 (rev 02) Subsystem: AMBIT Microsystem Corp.: Unknown device 0311 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 10 Region 0: Memory at c0204000 (32-bit, non-prefetchable) [size=8K] 06:06.0 CardBus bridge: Texas Instruments Texas Instruments PCIxx21/x515 Cardbus Controller Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 08 Interrupt: pin A routed to IRQ 20 Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 20400000-207ff000 (prefetchable) Memory window 1: 20800000-20bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 06:06.2 FireWire (IEEE 1394): Texas Instruments Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max), cache line size 08 Interrupt: pin C routed to IRQ 22 Region 0: Memory at c0208000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 06:06.3 Unknown mass storage controller: Texas Instruments Texas Instruments PCIxx21 Integrated FlashMedia Controller Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1750ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at c0206000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 06:06.4 Class 0805: Texas Instruments Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Subsystem: Acer Incorporated [ALI]: Unknown device 0080 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1750ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at c0209000 (32-bit, non-prefetchable) [size=256] Region 1: Memory at c0208c00 (32-bit, non-prefetchable) [size=256] Region 2: Memory at c0208800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) Subsystem: Acer Incorporated [ALI]: Unknown device 0079 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max), cache line size 10 Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at a000 [size=256] Region 1: Memory at c0209400 (32-bit, non-prefetchable) [size=256] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-