Bug 4410
| Summary: | Handler for [EmbeddedControl] returned AE_TIME - Asus laptop L4500R | ||
|---|---|---|---|
| Product: | ACPI | Reporter: | Milo Casagrande (milo_casagrande) |
| Component: | Other | Assignee: | Alexey Starikovskiy (astarikovskiy) |
| Status: | CLOSED PATCH_ALREADY_AVAILABLE | ||
| Severity: | high | CC: | acpi-bugzilla, bunk, kernel |
| Priority: | P2 | ||
| Hardware: | i386 | ||
| OS: | Linux | ||
| Kernel Version: | 2.6.11.6 | Subsystem: | |
| Regression: | --- | Bisected commit-id: | |
| Attachments: |
output from acpidmp
output from dmidecode output from lspci -vv output from /proc/interrupts output from dmesg -s64000 output of acpidump output of dmesg -s64000 output of dmidecode output of lspci -vv output of `cat /proc/interrupts` output of `acpidump -t DSDT` .config of kernel output from /proc/cpuinfo |
||
Created attachment 4805 [details]
output from acpidmp
Created attachment 4806 [details]
output from dmidecode
Created attachment 4807 [details]
output from lspci -vv
Created attachment 4808 [details]
output from /proc/interrupts
Please try 2.6.12-rc1-mm3 Can we please have an update on this? Does 2.6.12-rc5 work OK? 2.6.12-rc5-mm1? I can get to compile 2.6.12-rc5, it gives me error on i8042. Even 2.6.12-rc5-mm1 gives me the same error. Is this problem still present in 2.6.13-rc3-mm3? I can't compile 2.6.13-rc3-mm3, it gives me some error on 'netlink', on 2.6.12.3 without acpi patch it still doesn't work. i will try with acpi patch asap and also with 2.6.13-rc4-mm1 I compiled 2.6.12.3 with acpi-20050729 patch from acpi.sourceforge.net: frequency works, backlight switch (on/off) works but battery status doesn't work, it says there's no battery. Will try later with 2.6.13-rc4-mm1. Compiled 2.6.13-rc4-mm1 but nothing works: frequency, backlight and even battery. If some output are needed, ask me. Is it possible to compare: 2.6.13 -- latest kernel.org tree w/o any mm or ACPI patches 2.6.13 + latest ACPI patch http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.13/ 2.6.13 + latest mm patch Here the results: 2.6.13-rc6: frequency scaling works, battery status and backlight don't work. 2.6.13-rc6 + ACPI patch: frequency and backlight work, battery doesn't. At boot it says: "ACPI unable to load the System Description Tables" 2.6.13-rc6 + mm patch: as 2.6.13-rc6 + ACPI patch. with ACPI and mm patch when i plug in/out the AC adapter the brightness is adjusting automatically. > Unable to load the System Description Tables
That means ACPI bailed out and you are running with it disabled.
Please re-test with 2.6.13 final. If it still
fails this way, build it with CONFIG_ACPI_DEBUG=y
and attach the output from dmesg -s64000.
Now with 2.6.13.1 ACPI doesn't complain anymore, but only frequency works. Created attachment 5967 [details]
output from dmesg -s64000
It seems that it is another problem with EC device. Downstream bug report: http://bugs.gentoo.org/show_bug.cgi?id=105072 Please test linux-2.6.14-rc1 with ec_burst=1. No response from bug submitter for 2 months. Please reopen if bug is still present. I've tried 2.6.14 with no patch: CPU frequency is not working, battery and backlight switch also are not working. I'm going to try with the 2.6.14.2 and also with 2.6.14-mm2 patch. Thanks! Created attachment 6621 [details]
output of acpidump
Created attachment 6622 [details]
output of dmesg -s64000
Created attachment 6623 [details]
output of dmidecode
Created attachment 6624 [details]
output of lspci -vv
Created attachment 6625 [details]
output of `cat /proc/interrupts`
Created attachment 6626 [details]
output of `acpidump -t DSDT`
Did you try command line option "ec_burst=1", suggested in #19? I did try with `ec_burst=1` on kernel 2.6.14.3, but it is not working. With 2.6.14.3 even the CPU frequency is not working. Please try latest stable kernel with patch from http://bugzilla.kernel.org/show_bug.cgi?id=6455 Please also try 2.6.18-rc1 -- it should have all these patches applied. Regarding processor control, please attach your .config and /proc/cpuinfo. I compiled 2.6.18-rc2 and everything now is working. I only have some issue with suspend (it is not working... but I don't use it very often). Thank you! Created attachment 8619 [details]
.config of kernel
.config of the compiled kernel
Created attachment 8620 [details]
output from /proc/cpuinfo
output from /proc/cpuinfo
> I compiled 2.6.18-rc2 and everything now is working.
thanks. closed.
|
Distribution: Ubuntu Hoary Hardware Environment: Asus laptop L4500R Problem Description: acpi doesn't work with the patched kernel, it used to work with the 2.6.9 patched kernel. dmesg -s40000: 100000 - 0000000017f40000 (usable) BIOS-e820: 0000000017f40000 - 0000000017f50000 (ACPI data) BIOS-e820: 0000000017f50000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98112 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 94016 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000fad90 ACPI: RSDT (v001 A M I OEMRSDT 0x05000425 MSFT 0x00000097) @ 0x17f40000 ACPI: FADT (v001 A M I OEMFACP 0x05000425 MSFT 0x00000097) @ 0x17f40200 ACPI: ECDT (v001 A M I OEMECDT 0x05000425 MSFT 0x00000097) @ 0x17f40360 ACPI: OEMB (v001 A M I OEMBIOS 0x05000425 MSFT 0x00000097) @ 0x17f50040 ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x20030522) @ 0x17f45250 ACPI: DSDT (v001 A0009 A0009000 0x00000000 INTL 0x20030522) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 18000000 (gap: 18000000:e77c0000) Built 1 zonelists Kernel command line: root=/dev/hda3 ro quiet splash __iounmap: bad address c00fffd9 Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1400.274 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384272k/392448k available (2520k kernel code, 7676k reserved, 1176k data , 240k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2785.28 BogoMIPS (lpj=1392640) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 0 0000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 00000180 0000000 0 00000000 CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e30) NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Found ECDT ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (N ode d7f06dc0), AE_TIME ACPI-1138: *** Error: Method execution failed [\ECIO] (Node d7f06900), AE_TI ME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d 7f062c0), AE_TIME ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d 7f062c0), AE_TIME ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC0] (gpe 6) ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (N ode d7f06dc0), AE_TIME ACPI-1138: *** Error: Method execution failed [\ECIO] (Node d7f06900), AE_TI ME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d 7f062c0), AE_TIME ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (N ode d7f06dc0), AE_TIME ACPI-1138: *** Error: Method execution failed [\ECIO] (Node d7f06900), AE_TI ME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d 7f062c0), AE_TIME ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d 7f062c0), AE_TIME pnp: PnP ACPI: found 13 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. pnp: 00:07: ioport range 0x228-0x22f has been reserved VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 NTFS driver 2.1.22 [Flags: R/W]. Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4 ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (N ode d7f06dc0), AE_TIME ACPI-1138: *** Error: Method execution failed [\ECIO] (Node d7f06900), AE_TI ME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d 7f062c0), AE_TIME ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d 7f062c0), AE_TIME shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=300.00 Mhz, System=133.34 MHz radeonfb: PLL min 20000 max 35000 Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: 1024x768 radeonfb: detected LVDS panel size from BIOS: 1024x768 radeondb: BIOS provided dividers will be used Console: switching to colour frame buffer device 128x48 radeonfb: Dynamic Clock Power Management enabled radeonfb (0000:01:05.0): ATI Radeon X5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Ati IGP9100/M chipset agpgart: Maximum main memory to use for agp memory: 321M agpgart: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.14.0 20050125 on minor 0: PCI device 1002:5835 (ATI T echnologies Inc) ipmi message handler version v33 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered loop: loaded (max 8 devices) PS2ESDI: error initialising device, releasing resources nbd: registered device at major 43 b44.c:v0.95 (Aug 3, 2004) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4 eth0: Broadcom 4400 10/100BaseT Ethernet 00:11:d8:38:63:c2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N040ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[4] MMIO=[fe000000-fe0007ff] Max Packet=[2048] video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 0000:00:13.2: irq 10, pci mem 0xfeb00000 ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected hub 1-0:1.0: over-current change on port 1 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:13.0: PCI device 1002:4347 (ATI Technologies Inc) ohci_hcd 0000:00:13.0: irq 10, pci mem 0xfe900000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:13.1: PCI device 1002:4348 (ATI Technologies Inc) ohci_hcd 0000:00:13.1: irq 10, pci mem 0xfea00000 ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected hub 1-0:1.0: over-current change on port 6 usbcore: registered new driver cdc_acm drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB mod ems and ISDN adapters usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb 3-1: new low speed USB device using ohci_hcd and address 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio4 EISA: Probing bus 0 at eisa0 EISA: Detected 0 cards. Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003276826] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 ALSA device list: #0: ATI IXP rev 0 with AD1980 at 0xfe700000, irq 5 #1: ATI IXP Modem rev 1 at 0xfe800000, irq 5 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI wakeup devices: MC97 USB1 USB2 P0P2 BLAN SLPB ACPI: (supports S0 S3 S4 S5) EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 240k freed kjournald starting. Commit interval 5 seconds Adding 514072k swap on /dev/hda4. Priority:-1 extents:1 EXT3 FS on hda3, internal journal Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... lp: driver loaded but no devices found cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team DECnet: Routing cache hash table of 1024 buckets, 8Kbytes NET: Registered protocol family 12 b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear. parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). b44: eth0: Link is down. b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (N ode d7f06dc0), AE_TIME ACPI-1138: *** Error: Method execution failed [\ECIO] (Node d7f06900), AE_TI ME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ACPS] (N ode d7f06e40), AE_TIME ACPI-1138: *** Error: Method execution failed [\ACPS] (Node d7f024a0), AE_TI ME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.AC0_._PSR] (Node d 7f06480), AE_TIME Asus Laptop ACPI Extras version 0.29 L4R model detected, supported ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (N ode d7f06dc0), AE_TIME ACPI-1138: *** Error: Method execution failed [\ECIO] (Node d7f06900), AE_TI ME ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ACPS] (N ode d7f06e40), AE_TIME ACPI-1138: *** Error: Method execution failed [\ACPS] (Node d7f024a0), AE_TI ME ACPI-1138: *** Error: Method execution failed [\_PR_.CPU1._PPC] (Node d7f09c c0), AE_TIME ACPI: Thermal Zone [THRM] (58 C) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Xorg passes broken AGP3 flags (1f00020f). Fixed. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode [drm] Loading R200 Microcode NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver