Bug 4243
| Summary: | Asus M6Ne Battery not supported | ||
|---|---|---|---|
| Product: | ACPI | Reporter: | Julien HENRY (henryju) |
| Component: | BIOS | Assignee: | acpi_power-battery |
| Status: | REJECTED DUPLICATE | ||
| Severity: | normal | CC: | acpi-bugzilla |
| Priority: | P2 | ||
| Hardware: | i386 | ||
| OS: | Linux | ||
| Kernel Version: | 2.6.8 or 2.6.10 | Subsystem: | |
| Regression: | --- | Bisected commit-id: | |
| Attachments: |
acpidmp
dmidecode lspci -vv |
||
Created attachment 4596 [details]
acpidmp
Created attachment 4597 [details]
dmidecode
Created attachment 4598 [details]
lspci -vv
This is due to buggy DSDT. The DSDT proposed for bug 4244 solve this problem. DSDT AML has same BST0 implicit return issue seen in bug #4221 *** This bug has been marked as a duplicate of 4221 *** The latest BIOS from Asus for M6Ne (208Ae) resolves the issue (but there are still errors in the DSDT). |
Distribution: Mandrake 10.2 Hardware Environment: Asus Laptop M6BCE16-RW Software Environment: Problem Description: The current state of the battery is not supported. acpi -V Thermal 1: ok, 63.0 degrees C AC Adapter 1: off-line cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4300 mAh last full capacity: 4063 mAh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 130 mAh design capacity low: 21 mAh capacity granularity 1: 52 mAh capacity granularity 2: 2418 mAh model number: M6NE serial number: 00001 battery type: LIon OEM info: ASUSTek cat /proc/acpi/battery/BAT0/state present: yes ERROR: Unable to read battery status dmesg -s40000 Linux version 2.6.10-1mdk (apatard@n1.mandrakesoft.com) (gcc version 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #1 Fri Jan 14 14:31:03 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff40000 (usable) BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data) BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130880 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126784 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f5df0 ACPI: RSDT (v001 A M I OEMRSDT 0x09000407 MSFT 0x00000097) @ 0x1ff40000 ACPI: FADT (v001 A M I OEMFACP 0x09000407 MSFT 0x00000097) @ 0x1ff40200 ACPI: OEMB (v001 A M I OEMBIOS 0x09000407 MSFT 0x00000097) @ 0x1ff50040 ACPI: DSDT (v001 1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 Built 1 zonelists Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Initializing CPU#0 Kernel command line: BOOT_IMAGE=MDK_2610-1 ro root=305 acpi=on resume=/dev/hda6 splash=silent bootsplash: silent mode. PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 600.241 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514768k/523520k available (1903k kernel code, 8268k reserved, 546k data, 220k init, 0k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1187.84 BogoMIPS (lpj=593920) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found. ACPI: setting ELCR to 0200 (from 0c30) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 271k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ACS_] (Node c14e94c0), AE_NOT_EXIST ACPI-1138: *** Error: Method execution failed [\_SB_.AC__._INI] (Node c14e9ec0), AE_NOT_EXIST ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.BATS] (Node c14e94a0), AE_NOT_EXIST ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node c14ec1a0), AE_NOT_EXIST ACPI-0158: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node c14ec1a0), AE_NOT_EXIST ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Enabled i801 SMBus device PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 28) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10) ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PnPBIOS: Disabled PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. pnp: 00:08: ioport range 0x480-0x48f has been reserved pnp: 00:08: ioport range 0x5c0-0x5cf has been reserved pnp: 00:0c: ioport range 0x540-0x55f has been reserved pnp: 00:0c: ioport range 0x400-0x47f could not be reserved pnp: 00:0c: ioport range 0x480-0x48f has been reserved pnp: 00:0c: ioport range 0x500-0x53f has been reserved pnp: 00:0c: ioport range 0x4c0-0x4cf has been reserved apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1109183618.696:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:5680 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 116658 bytes, v3). Console: switching to colour frame buffer device 101x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found inotify device minor=63 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 4 (level, low) -> IRQ 4 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N060ATMR04-0, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITAUJ-831D, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 4.6 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> four buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 ACPI wakeup devices: SMBS MODM P0P2 CBC1 USB1 USB2 USB3 ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 220k freed usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 0xe800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 5, io base 0xe880 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 10, io base 0xec00 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xffaffc00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected EXT3 FS on hda5, internal journal Adding 1124508k swap on /dev/hda6. Priority:-1 extents:1 Asus Laptop ACPI Extras version 0.29 M6NE model detected, supported fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 [fglrx] module loaded - fglrx 8.10.19 [Feb 9 2005] on minor 0 Non-volatile memory driver v1.2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. ntfs: Ignoring new-style parameters in presence of obsolete ones NTFS driver 2.1.22 [Flags: R/O DEBUG MODULE]. NTFS volume version 3.1. loop: loaded (max 8 devices) ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[ff9ef800-ff9effff] Max Packet=[2048] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 tg3.c:v3.14 (November 15, 2004) ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:d8:23:b7:49 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org> eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ieee80211_crypt: registered algorithm 'NULL' ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 0.19 ipw2200: Copyright(c) 2003-2004 Intel Corporation ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 4 (level, low) -> IRQ 4 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003269993] ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Thermal Zone [THRM] (59 C) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) NET: Registered protocol family 17 ieee80211_crypt: registered algorithm 'WEP' ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 4 (level, low) -> IRQ 4 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49356 usecs intel8x0: clocking to 48000 Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.6 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.3 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized NET: Registered protocol family 10 Disabled Privacy Extensions on device c03348a0(lo) IPv6 over IPv4 tunneling driver [fglrx:firegl_mmap] *ERROR* No map found! eth3: no IPv6 routers present eth0: no IPv6 routers present ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c14ec1c0), AE_AML_NO_RETURN_VALUE cat /proc/interrupts CPU0 0: 2252964 XT-PIC timer 1: 5447 XT-PIC i8042 2: 0 XT-PIC cascade 4: 57891 XT-PIC ipw2200, eth0, Intel 82801DB-ICH4 5: 0 XT-PIC uhci_hcd 9: 460 XT-PIC acpi 10: 2 XT-PIC uhci_hcd, ehci_hcd, ohci1394 11: 0 XT-PIC uhci_hcd 12: 365318 XT-PIC i8042 14: 12665 XT-PIC ide0 15: 19702 XT-PIC ide1 NMI: 0 LOC: 2252925 ERR: 0 MIS: 0 OEMB @ 0x1ff50040 0000: 4f 45 4d 42 53 00 00 00 01 54 41 20 4d 20 49 20 OEMBS....TA M I 0010: 4f 45 4d 42 49 4f 53 20 07 04 00 09 4d 53 46 54 OEMBIOS ....MSFT 0020: 97 00 00 00 0c 06 14 2e 00 00 04 80 40 05 10 80 ............@... 0030: 04 10 00 05 40 00 00 00 20 00 00 f8 ff 00 00 c0 ....@... ....... 0040: fe 00 10 00 00 00 00 00 00 00 00 00 00 00 20 00 .............. . 0050: 00 00 e0 ... lspci -vv