Bug 2228

Summary: system crash - PCI/USB related
Product: Drivers Reporter: Martin Mokrejs (mmokrejs)
Component: IEEE1394Assignee: Ben Collins (bcollins)
Status: CLOSED CODE_FIX    
Severity: normal    
Priority: P2    
Hardware: i386   
OS: Linux   
Kernel Version: 2.6.4-rc1 Subsystem:
Regression: --- Bisected commit-id:

Description Martin Mokrejs 2004-02-29 12:44:12 UTC 
Distribution: gentoo
Hardware Environment: ASUS 3800C laptop with usb 1.1, PCMCIA contained for a
while Kouwell KW-7004 usb 2.0/ieee1394 card + USB 2.0 card reader (re-plugging
this card locked the computer), or at least it seemed so. Needles to say, I've
unloaded the card at the very end (the kernel crash seems to relate to the
unloading procedure).

Software Environment:

Problem Description:

I use acpi with patch for bug 2068. Alt+SysRq+S and B worked. Just before
replugging in the card, I saw very weird lpsci message (see attached image
file). Here is the system log which continues to the lockup (I have full kernel
debug option enabled):


Feb 29 20:17:24 vrapenec hub 1-0:1.0: individual port over-current protection
Feb 29 20:17:24 vrapenec hub 1-0:1.0: Port indicators are not supported
Feb 29 20:17:24 vrapenec hub 1-0:1.0: power on to power good time: 2ms
Feb 29 20:17:24 vrapenec hub 1-0:1.0: hub controller current requirement: 0mA
Feb 29 20:17:24 vrapenec hub 1-0:1.0: local power source is good
Feb 29 20:17:24 vrapenec hub 1-0:1.0: no over-current condition exists
Feb 29 20:17:24 vrapenec hub 1-0:1.0: enabling power on all ports
Feb 29 20:17:24 vrapenec uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 29 20:17:24 vrapenec PCI: Setting latency timer of device 0000:00:1d.1 to 64
Feb 29 20:17:24 vrapenec uhci_hcd 0000:00:1d.1: irq 9, io base 0000b400
Feb 29 20:17:24 vrapenec uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
Feb 29 20:17:24 vrapenec uhci_hcd 0000:00:1d.1: detected 2 ports
Feb 29 20:17:24 vrapenec uhci_hcd 0000:00:1d.1: root hub device address 1
Feb 29 20:17:24 vrapenec usb usb2: new device strings: Mfr=3, Product=2,
SerialNumber=1
Feb 29 20:17:24 vrapenec drivers/usb/core/message.c: USB device number 1 default
language ID 0x409
Feb 29 20:17:24 vrapenec usb usb2: Product: UHCI Host Controller
Feb 29 20:17:24 vrapenec usb usb2: Manufacturer: Linux 2.6.4-rc1 uhci_hcd
Feb 29 20:17:24 vrapenec usb usb2: SerialNumber: 0000:00:1d.1
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:17:24 vrapenec usb usb2: registering 2-0:1.0 (config #1, interface 0)
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:17:24 vrapenec hub 2-0:1.0: usb_probe_interface
Feb 29 20:17:24 vrapenec hub 2-0:1.0: usb_probe_interface - got id
Feb 29 20:17:24 vrapenec hub 2-0:1.0: USB hub found
Feb 29 20:17:24 vrapenec hub 2-0:1.0: 2 ports detected
Feb 29 20:17:24 vrapenec hub 2-0:1.0: standalone hub
Feb 29 20:17:24 vrapenec hub 2-0:1.0: unknown reserved power switching mode
Feb 29 20:17:24 vrapenec hub 2-0:1.0: individual port over-current protection
Feb 29 20:17:24 vrapenec hub 2-0:1.0: Port indicators are not supported
Feb 29 20:17:24 vrapenec hub 2-0:1.0: power on to power good time: 2ms
Feb 29 20:17:24 vrapenec hub 2-0:1.0: hub controller current requirement: 0mA
Feb 29 20:17:24 vrapenec hub 2-0:1.0: local power source is good
Feb 29 20:17:24 vrapenec hub 2-0:1.0: no over-current condition exists
Feb 29 20:17:24 vrapenec hub 2-0:1.0: enabling power on all ports
Feb 29 20:17:24 vrapenec Initializing USB Mass Storage driver...
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: registered new driver usb-storage
Feb 29 20:17:24 vrapenec USB Mass Storage support registered.
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: registered new driver hiddev
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: registered new driver hid
Feb 29 20:17:24 vrapenec drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: registered new mber 3
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: root hub device address 1
Feb 29 20:17:24 vrapenec usb usb3: new device strings: Mfr=3, Product=2,
SerialNumber=1
Feb 29 20:17:24 vrapenec drivers/usb/core/message.c: USB device number 1 default
language ID 0x409
Feb 29 20:17:24 vrapenec usb usb3: Product: OHCI Host Controller
Feb 29 20:17:24 vrapenec usb usb3: Manufacturer: Linux 2.6.4-rc1 ohci_hcd
Feb 29 20:17:24 vrapenec usb usb3: SerialNumber: 0000:07:00.0
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:17:24 vrapenec usb usb3: registering 3-0:1.0 (config #1, interface 0)
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:17:24 vrapenec hub 3-0:1.0: usb_probe_interface
Feb 29 20:17:24 vrapenec hub 3-0:1.0: usb_probe_interface - got id
Feb 29 20:17:24 vrapenec hub 3-0:1.0: USB hub found
Feb 29 20:17:24 vrapenec hub 3-0:1.0: 2 ports detected
Feb 29 20:17:24 vrapenec hub 3-0:1.0: standalone hub
Feb 29 20:17:24 vrapenec hub 3-0:1.0: unknown reserved power switching mode
Feb 29 20:17:24 vrapenec hub 3-0:1.0: global over-current protection
Feb 29 20:17:24 vrapenec hub 3-0:1.0: Port indicators are not supported
Feb 29 20:17:24 vrapenec hub 3-0:1.0: power on to power good time: 2ms
Feb 29 20:17:24 vrapenec hub 3-0:1.0: hub controller current requirement: 0mA
Feb 29 20:17:24 vrapenec hub 3-0:1.0: local power source is good
Feb 29 20:17:24 vrapenec hub 3-0:1.0: no over-current condition exists
Feb 29 20:17:24 vrapenec hub 3-0:1.0: enabling power on all ports
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: created debug files
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: OHCI controller state
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: OHCI 1.0, with legacy support
registers
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: control 0x083 HCFS=operational
CBSR=3
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: cmdstatus 0x00000 SOC=0
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: intrstatus 0x00000004 SF
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: intrenable 0x80000002 MIE WDH
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: hcca frame #004e
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: roothub.a 01000202 POTPGT=1 NPS
NDP=2
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: roothub.b 00000000 PPCM=0000 DR=0000
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: roothub.status 00000000
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: roothub.portstatus [0]
0x00000100 PPS
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.0: roothub.portstatus [1]
0x00000100 PPS
Feb 29 20:17:24 vrapenec ALSA device list:
Feb 29 20:17:24 vrapenec #0: Intel 82801CA-ICH3 at 0xe000, irq 11
Feb 29 20:17:24 vrapenec uhci_hcd 0000:00:1d.1: suspend_hc
Feb 29 20:17:24 vrapenec NET: Registered protocol family 26
Feb 29 20:17:24 vrapenec NET: Registered protocol family 2
Feb 29 20:17:24 vrapenec PCI: Enabling device 0000:07:00.1 (0000 -> 0002)
Feb 29 20:17:24 vrapenec ohcegacy support registers
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: control 0x083 HCFS=operational
CBSR=3
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: cmdstatus 0x00000 SOC=0
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: intrstatus 0x00000044 RHSC SF
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: intrenable 0x80000002 MIE WDH
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: hcca frame #0059
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: roothub.a 01000202 POTPGT=1 NPS
NDP=2
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: roothub.b 00000000 PPCM=0000 DR=0000
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: roothub.status 00000000
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: roothub.portstatus [0]
0x00010101 CSC PPS CCS
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.1: roothub.portstatus [1]
0x00000100 PPS
Feb 29 20:17:24 vrapenec PCI: Enabling device 0000:07:00.2 (0000 -> 0002)
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.2: OHCI Host Controller
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.2: reset, control = 0x0
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.2: irq 11, pci mem f9869000
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.2: new USB bus registered, assigned
bus number 5
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.2: root hub device address 1
Feb 29 20:17:24 vrapenec usb usb5: new device strings: Mfr=3, Product=2,
SerialNumber=1
Feb 29 20:17:24 vrapenec drivers/usb/core/message.c: USB device number 1 default
language ID 0x409
Feb 29 20:17:24 vrapenec usb usb5: Product: OHCI Host Controller
Feb 29 20:17:24 vrapenec usb usb5: Manufacturer: Linux 2.6.4-rc1 ohci_hcd
Feb 29 20:17:24 vrapenec usb usb5: SerialNumber: 0000:07:00.2
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:17:24 vrapenec usb usb5: registering 5-0:1.0 (config #1, interface 0)
Feb 29 20:17:24 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:17:24 vrapenec hub 5-0:1.0: usb_probe_interface
Feb 29 20:17:24 vrapenec hub 5-0:1.0: usb_probe_interface - got id
Feb 29 20:17:24 vrapenec hub 5-0:1.0: USB hub found
Feb 29 20:17:24 vrapenec hub 5-0:1.0: 2 ports detected
Feb 29 20:17:24 vrapenec hub 5-0:1.0: standalone hub
Feb 29 20:17:24 vrapenec hub 5-0:1.0: unknown reserved power switching mode
Feb 29 20:17:24 vrapenec hub 5-0:1.0: global over-current protection
Feb 29 20:17:24 vrapenec hub 5-0:1.0: Port indicators are not supported
Feb 29 20:17:24 vrapenec hub 5-0:1.0: power on to power good time: 2ms
Feb 29 20:17:24 vrapenec hub 5-0:1.0: hub controller current requirement: 0mA
Feb 29 20:17:24 vrapenec hub 5-0:1.0: local power source is good
Feb 29 20:17:24 vrapenec hub 5-0:1.0: no over-current condition exists
Feb 29 20:17:24 vrapenec hub 5-0:1.0: enabling power on all ports
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.2: created debug files
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.2: OHCI controller state
Feb 29 20:17:24 vrapenec ohci_hcd 0000:07:00.2: OHCI 1.0, withusb.c: usb_hotplug
Feb 29 20:17:24 vrapenec hub 6-0:1.0: usb_probe_interface
Feb 29 20:17:24 vrapenec hub 6-0:1.0: usb_probe_interface - got id
Feb 29 20:17:24 vrapenec hub 6-0:1.0: USB hub found
Feb 29 20:17:24 vrapenec hub 6-0:1.0: 6 ports detected
Feb 29 20:17:24 vrapenec hub 6-0:1.0: standalone hub
Feb 29 20:17:24 vrapenec hub 6-0:1.0: individual port power switching
Feb 29 20:17:24 vrapenec hub 6-0:1.0: individual port over-current protection
Feb 29 20:17:24 vrapenec hub 6-0:1.0: Single TT
Feb 29 20:17:24 vrapenec hub 6-0:1.0: TT requires at most 8 FS bit times
Feb 29 20:17:24 vrapenec hub 6-0:1.0: Port indicators are not supported
Feb 29 20:17:24 vrapenec hub 6-0:1.0: power on to power good time: 20ms
Feb 29 20:17:24 vrapenec hub 6-0:1.0: hub controller current requirement: 0mA
Feb 29 20:17:24 vrapenec hub 6-0:1.0: local power source is good
Feb 29 20:17:24 vrapenec hub 6-0:1.0: no over-current condition exists
Feb 29 20:17:24 vrapenec hub 6-0:1.0: enabling power on all ports
Feb 29 20:17:24 vrapenec PCI: Enabling device 0000:07:00.4 (0000 -> 0002)
Feb 29 20:17:24 vrapenec PCI: Setting latency timer of device 0000:07:00.4 to 64
Feb 29 20:17:24 vrapenec ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[11] 
MMIO=[41003000-410037ff]  Max Packet=[2048]
Feb 29 20:17:24 vrapenec ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host1)
Feb 29 20:17:24 vrapenec hub 4-0:1.0: debounce: port 1: delay 400ms stable 0
status 0x100
Feb 29 20:17:24 vrapenec hub 4-0:1.0: connect-debounce failed, port 1 disabled
Feb 29 20:17:24 vrapenec ehci_hcd 0000:07:00.3: GetStatus port 3 status 001803
POWER sig=j  CSC CONNECT
Feb 29 20:17:24 vrapenec hub 6-0:1.0: port 3, status 501, change 1, 480 Mb/s
Feb 29 20:17:24 vrapenec hub 6-0:1.0: debounce: port 3: delay 100ms stable 4
status 0x501
Feb 29 20:17:24 vrapenec ehci_hcd 0000:07:00.3: port 3 high speed
Feb 29 20:17:24 vrapenec ehci_hcd 0000:07:00.3: GetStatus port 3 status 001005
POWER sig=se0  PE CONNECT
Feb 29 20:17:24 vrapenec usb 6-3: new high speed USB device using address 2
Feb 29 20:17:24 vrapenec drivers/usb/core/config.c: unable to get descriptor
Feb 29 20:17:24 vrapenec usb 6-3: can't read configurations, error -32
Feb 29 20:17:24 vrapenec ehci_hcd 0000:07:00.3: port 3 high speed
Feb 29 20:17:24 vrapenec ehci_hcd 0000:07:00.3: GetStatus port 3 status 001005
POWER sig=se0  PE CONNECT
Feb 29 20:17:24 vrapenec usb 6-3: new high speed USB device using address 3
Feb 29 20:17:24 vrapenec ehci_hcd 0000:07:00.3: devpath 3 ep0in 3strikes
Feb 29 20:17:24 vrapenec usb 6-3: new device strings: Mfr=0, Product=3,
SerialNumber=4
Feb 29 20:17:24 vrapenec drivers/usb/core/message.c: USB device number 3 default
language ID 0x409
Feb 29 20:17:24 vrapenec usb 6-3: Product: Flash Reader
Feb 29 20:17:24 vrapenec usb 6-3: SerialNumber: 03457
Feb 29 20:17:25 vrapenec drivers/usb/<7>ehci_hcd 0000:07:00.3: devpath 3 ep0in
3strikes
Feb 29 20:17:25 vrapenec ehci_hcd 0000:07:00.3: devpath 3 ep0in 3strikes
Feb 29 20:17:25 vrapenec ehci_hcd 0000:07:00.3: devpath 3 ep0in 3strikes
Feb 29 20:17:25 vrapenec ehci_hcd 0000:07:00.3: devpath 3 ep0in 3strikes
Feb 29 20:17:26 vrapenec lp0: using parport0 (polling).
Feb 29 20:17:27 vrapenec eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Feb 29 20:17:41 vrapenec atkbd.c: Unknown key released (translated set 2, code
0x7a on isa0060/serio0).
Feb 29 20:17:41 vrapenec atkbd.c: This is an XFree86 bug. It shouldn't access
hardware directly.
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: device removed!
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: HC died; cleaning up
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.1: device removed!
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.1: HC died; cleaning up
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: device removed!
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: HC died; cleaning up
Feb 29 20:33:30 vrapenec ehci_hcd 0000:07:00.3: device removed
Feb 29 20:33:30 vrapenec ehci_hcd 0000:07:00.3: reset command ffffffff park=3
ithresh=63 LReset IAAD Async Periodic period=?? R
Feb 29 20:33:30 vrapenec ehci_hcd 0000:07:00.3: HC died; cleaning up
Feb 29 20:33:30 vrapenec usb 6-3: USB disconnect, address 3
Feb 29 20:33:30 vrapenec usb 6-3: usb_disable_device nuking all URBs
Feb 29 20:33:30 vrapenec usb 6-3: unregistering interface 6-3:1.0
Feb 29 20:33:30 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:33:30 vrapenec usb 6-3: unregistering device
Feb 29 20:33:30 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: roothub graceful disconnect
Feb 29 20:33:30 vrapenec usb usb3: usb_disable_device nuking all URBs
Feb 29 20:33:30 vrapenec usb usb3: unregistering interface 3-0:1.0
Feb 29 20:33:30 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:33:30 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: OHCI controller state
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: control 0xffffffff RWE RWC IR
HCFS=suspend BLE CLE IE PLE CBSR=3
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: intrstatus 0xffffffff MIE OC
RHSC FNO UE RD SF WDH SO
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: ed_periodcurrent ffffffff
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: ed_controlcurrent ffffffff
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: ed_bulkcurrent ffffffff
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.0: hcca frame #1add
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.1: remove, state 0
Feb 29 20:33:30 vrapenec usb usb4: USB disconnect, address 1
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.1: shutdown urb f7a77938 pipe
40408180 ep1in-intr
Feb 29 20:33:30 vrapenec usb usb4: hcd_unlink_urb f7a77938 fail -22
Feb 29 20:33:30 vrapenec usb usb4: unregistering device
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.1: stop operational controller
(state 0x00)
Feb 29 20:33:30 vrapenec usb usb5: unregistering device
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: stop operational controller
(state 0x00)
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: OHCI 3.15, with legacy support
registers
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: cmdstatus 0xffffffff SOC=3 OCR
BLF CLF HCR
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: intrenable 0xffffffff MIE OC
RHSC FNO UE RD SF WDH SO
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: ed_controlhead ffffffff
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: ed_bulkhead ffffffff
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: donehead ffffffff
Feb 29 20:33:30 vrapenec ohci_hcd 0000:07:00.2: USB bus 5 deregistered
Feb 29 20:33:30 vrapenec ehci_hcd 0000:07:00.3: roothub graceful disconnect
Feb 29 20:33:30 vrapenec usb usb6: usb_disable_device nuking all URBs
Feb 29 20:33:30 vrapenec usb usb6: unregistering interface 6-0:1.0
Feb 29 20:33:30 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:33:30 vrapenec drivers/usb/core/usb.c: usb_hotplug
Feb 29 20:33:30 vrapenec ehci_hcd 0000:07:00.3: reset command ffffffff park=3
ithresh=63 LReset IAAD Async Periodic period=?? R
Feb 29 20:33:30 vrapenec ehci_hcd 0000:07:00.3: dma_pool_destroy ehci_qh,
f7997000 busy
Feb 29 20:33:30 vrapenec ehci_hcd 0000:07:00.3: complete 45 unlink 0
Feb 29 20:33:30 vrapenec ehci_hcd 0000:07:00.3: USB bus 6 deregistered
Feb 29 20:33:30 vrapenec Unable to handle kernel NULL pointer dereference at
virtual address 00000000
Feb 29 20:33:30 vrapenec printing eip:
Feb 29 20:33:30 vrapenec c032747b
Feb 29 20:33:30 vrapenec *pde = 00000000
Feb 29 20:33:30 vrapenec Oops: 0000 [#1]
Feb 29 20:33:30 vrapenec PREEMPT 
Feb 29 20:33:30 vrapenec CPU:    0
Feb 29 20:33:30 vrapenec EIP:    0060:[<c032747b>]    Not tainted
Feb 29 20:33:30 vrapenec EFLAGS: 00010296
Feb 29 20:33:30 vrapenec EIP is at dv1394_remove_host+0x1b/0xcf
Feb 29 20:33:30 vrapenec eax: c056aa00   ebx: c0579660   ecx: f7b54000   edx:
f7b08000
Feb 29 20:33:30 vrapenec esi: 00000000   edi: c04c266a   ebp: 00000000   esp:
f7b55e5c
Feb 29 20:33:30 vrapenec ds: 007b   es: 007b   ss: 0068
Feb 29 20:33:30 vrapenec Process pccardd (pid: 16, threadinfo=f7b54000
task=f7b57880)
Feb 29 20:33:30 vrapenec Stack: f799d4c8 f795381c c0579660 c056aa24 f7b08000
f7b6956c c031069a f7b08000 
Feb 29 20:33:30 vrapenec f7953820 c05793a0 00000000 c0579660 c0579660 c056aa24
f7b08000 f7b6956c 
Feb 29 20:33:30 vrapenec c0311089 c0579660 f7b08000 00000000 f7b08000 f7b09d28
f7b54000 c0310072 
Feb 29 20:33:30 vrapenec Call Trace:
Feb 29 20:33:30 vrapenec [<c031069a>] __unregister_host+0xdc/0xe1
Feb 29 20:33:30 vrapenec [<c0311089>] highlevel_remove_host+0x45/0x73
Feb 29 20:33:30 vrapenec [<c0310072>] hpsb_remove_host+0x24/0x48
Feb 29 20:33:30 vrapenec [<c031cca5>] ohci1394_pci_remove+0x57/0x249
Feb 29 20:33:30 vrapenec [<c02351c1>] pci_device_remove+0x3b/0x3d
Feb 29 20:33:30 vrapenec [<c02b4d4d>] device_release_driver+0x64/0x66
Feb 29 20:33:30 vrapenec [<c02b4e71>] bus_remove_device+0x55/0x96
Feb 29 20:33:30 vrapenec [<c02b3f3e>] device_del+0x5d/0x9b
Feb 29 20:33:30 vrapenec [<c02b3f8f>] device_unregister+0x13/0x23
Feb 29 20:33:30 vrapenec [<c02331bb>] pci_destroy_dev+0x1c/0x89
Feb 29 20:33:30 vrapenec [<c0233301>] pci_remove_behind_bridge+0x27/0x3e
Feb 29 20:33:30 vrapenec [<c034adb0>] shutdown_socket+0x75/0x128
Feb 29 20:33:30 vrapenec [<c034af92>] socket_shutdown+0x4a/0x5e
Feb 29 20:33:30 vrapenec [<c034b507>] socket_remove+0x13/0x68
Feb 29 20:33:30 vrapenec [<c034b5ba>] socket_detect_change+0x5e/0x7e
Feb 29 20:33:30 vrapenec [<c034b771>] pccardd+0x197/0x214
Feb 29 20:33:30 vrapenec [<c011e849>] preempt_schedule+0x2a/0x43
Feb 29 20:33:30 vrapenec [<c011e862>] default_wake_function+0x0/0x12
Feb 29 20:33:30 vrapenec [<c01090d2>] ret_from_fork+0x6/0x14
Feb 29 20:33:30 vrapenec [<c011e862>] default_wake_function+0x0/0x12
Feb 29 20:33:30 vrapenec [<c034b5da>] pccardd+0x0/0x214
Feb 29 20:33:30 vrapenec [<c0107255>] kernel_thread_helper+0x5/0xb
Feb 29 20:33:30 vrapenec 
Feb 29 20:33:30 vrapenec Code: ac ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01
85 c0 0f 85 


The computer has been booted up with the PCMCIA card plugged in. Once I have
unplugged the card. The computer fan went on max rpm when the PCMCIA card has
been replugged in again. The card was unloaded once, then sys magic keys and reboot.




Steps to reproduce: