Bug 206923
| Summary: | ath10k qca6174 failed to receive scan abortion completion: timed out, restarts hardware, then freezes up the system | ||
|---|---|---|---|
| Product: | Drivers | Reporter: | Mike Lothian (mike) |
| Component: | network-wireless | Assignee: | drivers_network-wireless (drivers_network-wireless) |
| Status: | NEW --- | ||
| Severity: | normal | ||
| Priority: | P1 | ||
| Hardware: | All | ||
| OS: | Linux | ||
| Kernel Version: | 5.6.0-rc5 | Subsystem: | |
| Regression: | No | Bisected commit-id: | |
| Attachments: | dmesg | ||
Created attachment 288011 [details] dmesg Key messages: [ 0.798721] ath10k_pci 0000:3c:00.0: Using iommu dma mapping [ 0.798724] ath10k_pci 0000:3c:00.0: DMAR: 32bit DMA uses non-identity mapping [ 0.798891] ath10k_pci 0000:3c:00.0: enabling device (0000 -> 0002) [ 0.802044] ath10k_pci 0000:3c:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 1.020644] ath10k_pci 0000:3c:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [ 1.025096] ath10k_pci 0000:3c:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 1.032111] ath10k_pci 0000:3c:00.0: firmware ver WLAN.RM.4.4.1-00140-QCARMSWPZ-1 api 6 features wowlan,ignore-otp,mfp crc32 29eb8ca1 [ 1.102145] ath10k_pci 0000:3c:00.0: board_file api 2 bmi_id N/A crc32 4ac0889b [ 1.199203] ath10k_pci 0000:3c:00.0: htt-ver 3.60 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [86441.174256] ath10k_pci 0000:3c:00.0: failed to receive scan abortion completion: timed out [86441.174265] ath10k_pci 0000:3c:00.0: failed to stop scan: -110 [86441.174268] ath10k_pci 0000:3c:00.0: failed to start hw scan: -110 [87233.376227] ath10k_pci 0000:3c:00.0: wmi command 12289 timeout, restarting hardware [87233.376232] ath10k_pci 0000:3c:00.0: failed to start hw scan: -11 [87236.416323] ath10k_pci 0000:3c:00.0: failed to receive initialized event from target: 00000000 [87239.448376] ath10k_pci 0000:3c:00.0: failed to receive initialized event from target: 00000000 [87239.448379] ath10k_pci 0000:3c:00.0: failed to wait for target init: -110 [87239.449823] ath10k_pci 0000:3c:00.0: failed to set inactivity time for vdev 0: -108 [87239.449825] ath10k_pci 0000:3c:00.0: failed to setup powersave: -108 [87239.449841] ath10k_pci 0000:3c:00.0: failed to set PS Mode 0 for vdev 0: -108 [87239.449842] ath10k_pci 0000:3c:00.0: failed to setup powersave: -108 [87239.449843] ath10k_pci 0000:3c:00.0: failed to setup ps on vdev 0: -108 [87239.449860] ath10k_pci 0000:3c:00.0: failed to flush transmit queue (skip 1 ar-state 2): 5000 [87239.449915] ath10k_pci 0000:3c:00.0: failed to delete peer a0:63:91:a7:3c:9f for vdev 0: -108 [87239.450437] ath10k_pci 0000:3c:00.0: failed to recalculate rts/cts prot for vdev 0: -108 [87239.450438] ath10k_pci 0000:3c:00.0: failed to set cts protection for vdev 0: -108 Full dmesg attached