Bug 203843
| Summary: | e1000e crash when ethernet is plugged in | ||
|---|---|---|---|
| Product: | Networking | Reporter: | justin (justinvangog) |
| Component: | Other | Assignee: | Stephen Hemminger (stephen) |
| Status: | NEW --- | ||
| Severity: | normal | CC: | justinvangog |
| Priority: | P1 | ||
| Hardware: | Intel | ||
| OS: | Linux | ||
| Kernel Version: | 5.1.7 | Subsystem: | |
| Regression: | No | Bisected commit-id: | |
| Attachments: | log of the crash | ||
The issue occurs when plugging in the cable or unplugging and plugging the cable. Systems tested: Dell PowerEdge T30 server with 1.0.15 firmware Dell PowerEdge T20 server with 1.0.18 firmware Lenovo ThinkPad P52 laptop with 02.25 firmware On both systems the Intel Management Engine is enabled. The problem occurs on both the Gentoo Sources and the Vanilla Soures. Kernels tried: 5.1.5, 5.1.7 and 4.19.48. - Tried different cabling; - Tried using a managed Cisco Catalyst 3650 Compact switch; - Tried using an unmanaged switch; - Tried with Cisco ASA 5506 - Tried appending pcie_aspm=off to the kernel - Tried disabling various options using ethtool -K enp0s31f6 gso off gro off tso off - Tried both compiling it in the kernel and as a module - Tried using the in-kernel e1000e driver initially and tried using the driver from the Intel website (version 3.4.2.) after with the various kernels to see whether it'd make a difference. All of the above done to exclude options. The problem occurs on the I218 and I219-LM, both of them being onboard adapters on the devices. The problem does not occur on a Intel 82574L PCI-Express Card, using the e1000e driver too. |
Created attachment 283143 [details] log of the crash I get a crash when i plug in a network cable after the system has booted. Im on kernel version 5.1.7 e1000e driver version 3.4.2.4 T30 ~ # [ 20.027123] e1000e: enp0s31f6 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None [ 20.027151] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 20.027211] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 25.212764] ------------[ cut here ]------------ [ 25.212824] NETDEV WATCHDOG: enp0s31f6 (e1000e): transmit queue 0 timed out [ 25.212909] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x1ee/0x200 [ 25.212977] Modules linked in: snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core e1000e(O) snd_pcm tpm_tis tpm_tis_core efivarfs [ 25.213107] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 5.1.7-gentoo #1 [ 25.213171] Hardware name: Dell Inc. PowerEdge T30/07T4MC, BIOS 1.0.15 07/12/2018 [ 25.213236] RIP: 0010:dev_watchdog+0x1ee/0x200 [ 25.213277] Code: 00 48 63 4d e0 eb 93 4c 89 e7 c6 05 bf 98 ad 00 01 e8 26 d4 fc ff 89 d9 4c 89 e6 48 c7 c7 b0 85 68 84 48 89 c2 e8 79 96 83 ff <0f> 0b eb c0 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 c7 47 08 [ 25.213421] RSP: 0018:ffff9eefddb83ea0 EFLAGS: 00010286 [ 25.213466] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 25.213525] RDX: 0000000000040400 RSI: 00000000000000f6 RDI: 0000000000000300 [ 25.213584] RBP: ffff9eefcaa9c440 R08: 000000000000039c R09: 0000000000aaaaaa [ 25.213643] R10: 0000000000000000 R11: ffffb691f01c0220 R12: ffff9eefcaa9c000 [ 25.213702] R13: 0000000000000003 R14: ffff9eefddb83ef0 R15: 0000000000000000 [ 25.213762] FS: 0000000000000000(0000) GS:ffff9eefddb80000(0000) knlGS:0000000000000000 [ 25.213828] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.213877] CR2: 00007f6a77a0c680 CR3: 00000001b820e003 CR4: 00000000003606e0 [ 25.213936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 25.213994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 25.214053] Call Trace: [ 25.214080] <IRQ> [ 25.214107] ? qdisc_put_unlocked+0x30/0x30 [ 25.214148] call_timer_fn+0x26/0x120 [ 25.214185] run_timer_softirq+0x390/0x3c0 [ 25.214225] ? tick_sched_timer+0x32/0x70 [ 25.214266] ? __hrtimer_run_queues+0x10b/0x280 [ 25.214310] ? recalibrate_cpu_khz+0x10/0x10 [ 25.214352] __do_softirq+0xd3/0x2ec [ 25.214390] irq_exit+0xa0/0xb0 [ 25.214422] smp_apic_timer_interrupt+0x67/0x130 [ 25.214466] apic_timer_interrupt+0xf/0x20 [ 25.214504] </IRQ> [ 25.214530] RIP: 0010:cpuidle_enter_state+0xac/0x420 [ 25.214574] Code: 89 04 24 0f 1f 44 00 00 31 ff e8 ff 66 8f ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 3e 03 00 00 31 ff e8 58 ca 93 ff fb 45 85 e4 <0f> 88 7c 02 00 00 49 63 cc 48 8b 34 24 48 2b 74 24 08 48 8d 04 49 [ 25.214717] RSP: 0018:ffffb691c00bbe98 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 25.214787] RAX: ffff9eefddba0d00 RBX: ffffffff8489b260 RCX: 000000000000001f [ 25.214846] RDX: 00000005decbd37a RSI: 0000000026a5b845 RDI: 0000000000000000 [ 25.214905] RBP: ffff9eefddba8200 R08: 0000000000000002 R09: 00000000000205c0 [ 25.214964] R10: 00000017dec25626 R11: ffff9eefddb9fe44 R12: 0000000000000006 [ 25.215023] R13: ffffffff8489b4b8 R14: ffffffff8489b4a0 R15: 0000000000000000 [ 25.215086] ? cpuidle_enter_state+0x91/0x420 [ 25.215128] do_idle+0x1a6/0x1e0 [ 25.215164] cpu_startup_entry+0x14/0x20 [ 25.215202] start_secondary+0x159/0x180 [ 25.215240] secondary_startup_64+0xa4/0xb0 [ 25.215279] ---[ end trace 7e6afe981485542a ]--- [ 25.215346] e1000e 0000:00:1f.6 enp0s31f6: Reset adapter unexpectedly [ 29.186751] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None