Bug 198839
Summary: | Backport of the Linux MegaRAID driver for SAS based RAID controllers | ||
---|---|---|---|
Product: | SCSI Drivers | Reporter: | doru iorgulescu (doru.iorgulescu1) |
Component: | Other | Assignee: | scsi_drivers-other |
Status: | NEW --- | ||
Severity: | high | CC: | sumit.saxena |
Priority: | P1 | ||
Hardware: | Intel | ||
OS: | Linux | ||
Kernel Version: | 4.9.82 4.14.20 | Subsystem: | |
Regression: | No | Bisected commit-id: | |
Attachments: |
Backport of the Linux MegaRAID driver for SAS based RAID controllers
attachment-17443-0.html attachment-9893-0.html attachment-22179-0.html |
(In reply to doru iorgulescu from comment #0) > Created attachment 274257 [details] > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > backport of the megaraid_sas driver from kernel 4.14.20 to kernel 4.9.82 > > Hi, > > Hardware: > DMI: Intel Corporation S2600WFT/S2600WFT, BIOS > SE5C620.86B.00.01.0009.101920170742 10/19/2017 > > I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to > /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel 4.9.82 > and is OK ! > I send dmesg atached. > > > The problem for original linux kernel 4.9.82 is : > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode > SAS3508 (rev 01) > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 (Integrated > RAID Module RMSP3CD080F) > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0 > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > I/O ports at 8000 [size=256] > Expansion ROM at <ignored> [disabled] > Capabilities: [40] Power Management version 3 > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > Capabilities: [70] Express Endpoint, MSI 00 > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > Capabilities: [d0] Vital Product Data > Capabilities: [100] Advanced Error Reporting > Capabilities: [148] Power Budgeting <?>Regards, > Capabilities: [158] Alternative Routing-ID Interpretation (ARI) > Capabilities: [168] #19 > Capabilities: [254] #16 > Capabilities: [284] Vendor Specific Information: ID=0002 Rev=1 > Len=100 <?> > Capabilities: [384] Vendor Specific Information: ID=0001 Rev=1 > Len=038 <?> > Capabilities: [3bc] #15 > Kernel driver in use: megaraid_sas > Kernel modules: megaraid_sas > > Regards, > Doru Iorgulescu Hi Doru, I have gone through the attached logs and observed some prints about hibernation failure. -- [ 3.788370] PM: Starting manual resume from disk [ 3.788375] PM: Hibernation image partition 8:9 present [ 3.788377] PM: Looking for hibernation image. [ 3.788638] PM: Image not found (code -22) [ 3.788640] PM: Hibernation image not present or could not be loaded. -- Is it the problem you are trying to point ? Please clarify. Is it regression from 4.14.20 to 4.9.82 due to megaraid_sas driver backporting ? Thanks, Sumit Created attachment 274275 [details] attachment-17443-0.html Hi, The problem is in kernel 4.9.82 #define MEGASAS_VERSION "06.811.02.00-rc1" For kernel 4.14.20 is OK #define MEGASAS_VERSION "07.702.06.00-rc1" 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3508 (rev 01) Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 (Integrated RAID Module RMSP3CD080F) Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0 Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] Memory at b8800000 (32-bit, non-prefetchable) [size=1M] I/O ports at 8000 [size=256] Expansion ROM at <ignored> [disabled] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [148] Power Budgeting <?>Regards, Capabilities: [158] Alternative Routing-ID Interpretation (ARI) Capabilities: [168] #19 Capabilities: [254] #16 Capabilities: [284] Vendor Specific Information: ID=0002 Rev=1 Len=100 <?> Capabilities: [384] Vendor Specific Information: ID=0001 Rev=1 Len=038 <?> Capabilities: [3bc] #15 Kernel driver in use: megaraid_sas Kernel modules: megaraid_sas Regards, Doru Iorgulescu On Tue, Feb 20, 2018 at 9:07 AM, <bugzilla-daemon@bugzilla.kernel.org> wrote: > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > Sumit Saxena (sumit.saxena@broadcom.com) changed: > > What |Removed |Added > ------------------------------------------------------------ > ---------------- > CC| |sumit.saxena@broadcom.com > > --- Comment #1 from Sumit Saxena (sumit.saxena@broadcom.com) --- > (In reply to doru iorgulescu from comment #0) > > Created attachment 274257 [details] > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > > > backport of the megaraid_sas driver from kernel 4.14.20 to kernel 4.9.82 > > > > Hi, > > > > Hardware: > > DMI: Intel Corporation S2600WFT/S2600WFT, BIOS > > SE5C620.86B.00.01.0009.101920170742 10/19/2017 > > > > I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to > > /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel > 4.9.82 > > and is OK ! > > I send dmesg atached. > > > > > > The problem for original linux kernel 4.9.82 is : > > > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode > > SAS3508 (rev 01) > > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 > (Integrated > > RAID Module RMSP3CD080F) > > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0 > > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > > I/O ports at 8000 [size=256] > > Expansion ROM at <ignored> [disabled] > > Capabilities: [40] Power Management version 3 > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > > Capabilities: [70] Express Endpoint, MSI 00 > > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > > Capabilities: [d0] Vital Product Data > > Capabilities: [100] Advanced Error Reporting > > Capabilities: [148] Power Budgeting <?>Regards, > > Capabilities: [158] Alternative Routing-ID Interpretation (ARI) > > Capabilities: [168] #19 > > Capabilities: [254] #16 > > Capabilities: [284] Vendor Specific Information: ID=0002 Rev=1 > > Len=100 <?> > > Capabilities: [384] Vendor Specific Information: ID=0001 Rev=1 > > Len=038 <?> > > Capabilities: [3bc] #15 > > Kernel driver in use: megaraid_sas > > Kernel modules: megaraid_sas > > > > Regards, > > Doru Iorgulescu > > Hi Doru, > > I have gone through the attached logs and observed some prints about > hibernation failure. > -- > [ 3.788370] PM: Starting manual resume from disk > [ 3.788375] PM: Hibernation image partition 8:9 present > [ 3.788377] PM: Looking for hibernation image. > [ 3.788638] PM: Image not found (code -22) > [ 3.788640] PM: Hibernation image not present or could not be loaded. > -- > > Is it the problem you are trying to point ? Please clarify. > Is it regression from 4.14.20 to 4.9.82 due to megaraid_sas driver > backporting > ? > > > Thanks, > Sumit > > -- > You are receiving this mail because: > You reported the bug. (In reply to doru iorgulescu from comment #2) > Created attachment 274275 [details] > attachment-17443-0.html > > Hi, > The problem is in kernel 4.9.82 > #define MEGASAS_VERSION "06.811.02.00-rc1" > For kernel 4.14.20 is OK > #define MEGASAS_VERSION "07.702.06.00-rc1" ok, now with #define MEGASAS_VERSION "07.702.06.00-rc1" backported to kernel 4.9.82, issue is resolved in kernel 4.9.82, right ? Thanks, Sumit > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode > SAS3508 (rev 01) > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 (Integrated > RAID Module RMSP3CD080F) > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0 > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > I/O ports at 8000 [size=256] > Expansion ROM at <ignored> [disabled] > Capabilities: [40] Power Management version 3 > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > Capabilities: [70] Express Endpoint, MSI 00 > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > Capabilities: [d0] Vital Product Data > Capabilities: [100] Advanced Error Reporting > Capabilities: [148] Power Budgeting <?>Regards, > Capabilities: [158] Alternative Routing-ID Interpretation (ARI) > Capabilities: [168] #19 > Capabilities: [254] #16 > Capabilities: [284] Vendor Specific Information: ID=0002 Rev=1 > Len=100 <?> > Capabilities: [384] Vendor Specific Information: ID=0001 Rev=1 > Len=038 <?> > Capabilities: [3bc] #15 > Kernel driver in use: megaraid_sas > Kernel modules: megaraid_sas > > Regards, > Doru Iorgulescu > > > > > > On Tue, Feb 20, 2018 at 9:07 AM, <bugzilla-daemon@bugzilla.kernel.org> > wrote: > > > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > > > Sumit Saxena (sumit.saxena@broadcom.com) changed: > > > > What |Removed |Added > > ------------------------------------------------------------ > > ---------------- > > CC| |sumit.saxena@broadcom.com > > > > --- Comment #1 from Sumit Saxena (sumit.saxena@broadcom.com) --- > > (In reply to doru iorgulescu from comment #0) > > > Created attachment 274257 [details] > > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > > > > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > > > > > backport of the megaraid_sas driver from kernel 4.14.20 to kernel 4.9.82 > > > > > > Hi, > > > > > > Hardware: > > > DMI: Intel Corporation S2600WFT/S2600WFT, BIOS > > > SE5C620.86B.00.01.0009.101920170742 10/19/2017 > > > > > > I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to > > > /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel > > 4.9.82 > > > and is OK ! > > > I send dmesg atached. > > > > > > > > > The problem for original linux kernel 4.9.82 is : > > > > > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode > > > SAS3508 (rev 01) > > > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 > > (Integrated > > > RAID Module RMSP3CD080F) > > > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0 > > > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > > > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > > > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > > > I/O ports at 8000 [size=256] > > > Expansion ROM at <ignored> [disabled] > > > Capabilities: [40] Power Management version 3 > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > > > Capabilities: [70] Express Endpoint, MSI 00 > > > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > > > Capabilities: [d0] Vital Product Data > > > Capabilities: [100] Advanced Error Reporting > > > Capabilities: [148] Power Budgeting <?>Regards, > > > Capabilities: [158] Alternative Routing-ID Interpretation (ARI) > > > Capabilities: [168] #19 > > > Capabilities: [254] #16 > > > Capabilities: [284] Vendor Specific Information: ID=0002 Rev=1 > > > Len=100 <?> > > > Capabilities: [384] Vendor Specific Information: ID=0001 Rev=1 > > > Len=038 <?> > > > Capabilities: [3bc] #15 > > > Kernel driver in use: megaraid_sas > > > Kernel modules: megaraid_sas > > > > > > Regards, > > > Doru Iorgulescu > > > > Hi Doru, > > > > I have gone through the attached logs and observed some prints about > > hibernation failure. > > -- > > [ 3.788370] PM: Starting manual resume from disk > > [ 3.788375] PM: Hibernation image partition 8:9 present > > [ 3.788377] PM: Looking for hibernation image. > > [ 3.788638] PM: Image not found (code -22) > > [ 3.788640] PM: Hibernation image not present or could not be loaded. > > -- > > > > Is it the problem you are trying to point ? Please clarify. > > Is it regression from 4.14.20 to 4.9.82 due to megaraid_sas driver > > backporting > > ? > > > > > > Thanks, > > Sumit > > > > -- > > You are receiving this mail because: > > You reported the bug. Created attachment 274279 [details] attachment-9893-0.html Not oficial, I have tested : I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel 4.9.82 and is OK ! You have the dmesg Regards, Doru Iorgulescu On Tue, Feb 20, 2018 at 11:38 AM, <bugzilla-daemon@bugzilla.kernel.org> wrote: > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > --- Comment #3 from Sumit Saxena (sumit.saxena@broadcom.com) --- > (In reply to doru iorgulescu from comment #2) > > Created attachment 274275 [details] > > attachment-17443-0.html > > > > Hi, > > The problem is in kernel 4.9.82 > > #define MEGASAS_VERSION "06.811.02.00-rc1" > > For kernel 4.14.20 is OK > > #define MEGASAS_VERSION "07.702.06.00-rc1" > > ok, now with > #define MEGASAS_VERSION "07.702.06.00-rc1" > backported to kernel 4.9.82, issue is resolved in kernel 4.9.82, right ? > > > Thanks, > Sumit > > > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode > > SAS3508 (rev 01) > > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 > (Integrated > > RAID Module RMSP3CD080F) > > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0 > > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > > I/O ports at 8000 [size=256] > > Expansion ROM at <ignored> [disabled] > > Capabilities: [40] Power Management version 3 > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > > Capabilities: [70] Express Endpoint, MSI 00 > > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > > Capabilities: [d0] Vital Product Data > > Capabilities: [100] Advanced Error Reporting > > Capabilities: [148] Power Budgeting <?>Regards, > > Capabilities: [158] Alternative Routing-ID Interpretation (ARI) > > Capabilities: [168] #19 > > Capabilities: [254] #16 > > Capabilities: [284] Vendor Specific Information: ID=0002 Rev=1 > > Len=100 <?> > > Capabilities: [384] Vendor Specific Information: ID=0001 Rev=1 > > Len=038 <?> > > Capabilities: [3bc] #15 > > Kernel driver in use: megaraid_sas > > Kernel modules: megaraid_sas > > > > Regards, > > Doru Iorgulescu > > > > > > > > > > > > On Tue, Feb 20, 2018 at 9:07 AM, <bugzilla-daemon@bugzilla.kernel.org> > > wrote: > > > > > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > > > > > Sumit Saxena (sumit.saxena@broadcom.com) changed: > > > > > > What |Removed |Added > > > ------------------------------------------------------------ > > > ---------------- > > > CC| | > sumit.saxena@broadcom.com > > > > > > --- Comment #1 from Sumit Saxena (sumit.saxena@broadcom.com) --- > > > (In reply to doru iorgulescu from comment #0) > > > > Created attachment 274257 [details] > > > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > > > > > > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > > > > > > > backport of the megaraid_sas driver from kernel 4.14.20 to kernel > 4.9.82 > > > > > > > > Hi, > > > > > > > > Hardware: > > > > DMI: Intel Corporation S2600WFT/S2600WFT, BIOS > > > > SE5C620.86B.00.01.0009.101920170742 10/19/2017 > > > > > > > > I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to > > > > /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel > > > 4.9.82 > > > > and is OK ! > > > > I send dmesg atached. > > > > > > > > > > > > The problem for original linux kernel 4.9.82 is : > > > > > > > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID > Tri-Mode > > > > SAS3508 (rev 01) > > > > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 > > > (Integrated > > > > RAID Module RMSP3CD080F) > > > > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node > 0 > > > > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > > > > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > > > > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > > > > I/O ports at 8000 [size=256] > > > > Expansion ROM at <ignored> [disabled] > > > > Capabilities: [40] Power Management version 3 > > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > > > > Capabilities: [70] Express Endpoint, MSI 00 > > > > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > > > > Capabilities: [d0] Vital Product Data > > > > Capabilities: [100] Advanced Error Reporting > > > > Capabilities: [148] Power Budgeting <?>Regards, > > > > Capabilities: [158] Alternative Routing-ID Interpretation > (ARI) > > > > Capabilities: [168] #19 > > > > Capabilities: [254] #16 > > > > Capabilities: [284] Vendor Specific Information: ID=0002 > Rev=1 > > > > Len=100 <?> > > > > Capabilities: [384] Vendor Specific Information: ID=0001 > Rev=1 > > > > Len=038 <?> > > > > Capabilities: [3bc] #15 > > > > Kernel driver in use: megaraid_sas > > > > Kernel modules: megaraid_sas > > > > > > > > Regards, > > > > Doru Iorgulescu > > > > > > Hi Doru, > > > > > > I have gone through the attached logs and observed some prints about > > > hibernation failure. > > > -- > > > [ 3.788370] PM: Starting manual resume from disk > > > [ 3.788375] PM: Hibernation image partition 8:9 present > > > [ 3.788377] PM: Looking for hibernation image. > > > [ 3.788638] PM: Image not found (code -22) > > > [ 3.788640] PM: Hibernation image not present or could not be > loaded. > > > -- > > > > > > Is it the problem you are trying to point ? Please clarify. > > > Is it regression from 4.14.20 to 4.9.82 due to megaraid_sas driver > > > backporting > > > ? > > > > > > > > > Thanks, > > > Sumit > > > > > > -- > > > You are receiving this mail because: > > > You reported the bug. > > -- > You are receiving this mail because: > You reported the bug. > (In reply to doru iorgulescu from comment #4) > Created attachment 274279 [details] > attachment-9893-0.html > > Not oficial, > I have tested : > I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to > /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel 4.9.82 > and is OK ! > You have the dmesg > Regards, > Doru Iorgulescu Ok, I don't see anything wrong in dmesg. MegaRAID adapter is successfully initialized. If you run into any issue due to megaraid_sas driver, let me know. Thanks, Sumit > > > On Tue, Feb 20, 2018 at 11:38 AM, <bugzilla-daemon@bugzilla.kernel.org> > wrote: > > > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > > > --- Comment #3 from Sumit Saxena (sumit.saxena@broadcom.com) --- > > (In reply to doru iorgulescu from comment #2) > > > Created attachment 274275 [details] > > > attachment-17443-0.html > > > > > > Hi, > > > The problem is in kernel 4.9.82 > > > #define MEGASAS_VERSION "06.811.02.00-rc1" > > > For kernel 4.14.20 is OK > > > #define MEGASAS_VERSION "07.702.06.00-rc1" > > > > ok, now with > > #define MEGASAS_VERSION "07.702.06.00-rc1" > > backported to kernel 4.9.82, issue is resolved in kernel 4.9.82, right ? > > > > > > Thanks, > > Sumit > > > > > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode > > > SAS3508 (rev 01) > > > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 > > (Integrated > > > RAID Module RMSP3CD080F) > > > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0 > > > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > > > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > > > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > > > I/O ports at 8000 [size=256] > > > Expansion ROM at <ignored> [disabled] > > > Capabilities: [40] Power Management version 3 > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > > > Capabilities: [70] Express Endpoint, MSI 00 > > > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > > > Capabilities: [d0] Vital Product Data > > > Capabilities: [100] Advanced Error Reporting > > > Capabilities: [148] Power Budgeting <?>Regards, > > > Capabilities: [158] Alternative Routing-ID Interpretation (ARI) > > > Capabilities: [168] #19 > > > Capabilities: [254] #16 > > > Capabilities: [284] Vendor Specific Information: ID=0002 Rev=1 > > > Len=100 <?> > > > Capabilities: [384] Vendor Specific Information: ID=0001 Rev=1 > > > Len=038 <?> > > > Capabilities: [3bc] #15 > > > Kernel driver in use: megaraid_sas > > > Kernel modules: megaraid_sas > > > > > > Regards, > > > Doru Iorgulescu > > > > > > > > > > > > > > > > > > On Tue, Feb 20, 2018 at 9:07 AM, <bugzilla-daemon@bugzilla.kernel.org> > > > wrote: > > > > > > > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > > > > > > > Sumit Saxena (sumit.saxena@broadcom.com) changed: > > > > > > > > What |Removed |Added > > > > ------------------------------------------------------------ > > > > ---------------- > > > > CC| | > > sumit.saxena@broadcom.com > > > > > > > > --- Comment #1 from Sumit Saxena (sumit.saxena@broadcom.com) --- > > > > (In reply to doru iorgulescu from comment #0) > > > > > Created attachment 274257 [details] > > > > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > > > > > > > > > Backport of the Linux MegaRAID driver for SAS based RAID controllers > > > > > > > > > > backport of the megaraid_sas driver from kernel 4.14.20 to kernel > > 4.9.82 > > > > > > > > > > Hi, > > > > > > > > > > Hardware: > > > > > DMI: Intel Corporation S2600WFT/S2600WFT, BIOS > > > > > SE5C620.86B.00.01.0009.101920170742 10/19/2017 > > > > > > > > > > I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to > > > > > /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel > > > > 4.9.82 > > > > > and is OK ! > > > > > I send dmesg atached. > > > > > > > > > > > > > > > The problem for original linux kernel 4.9.82 is : > > > > > > > > > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID > > Tri-Mode > > > > > SAS3508 (rev 01) > > > > > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 > > > > (Integrated > > > > > RAID Module RMSP3CD080F) > > > > > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node > > 0 > > > > > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > > > > > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > > > > > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > > > > > I/O ports at 8000 [size=256] > > > > > Expansion ROM at <ignored> [disabled] > > > > > Capabilities: [40] Power Management version 3 > > > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > > > > > Capabilities: [70] Express Endpoint, MSI 00 > > > > > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > > > > > Capabilities: [d0] Vital Product Data > > > > > Capabilities: [100] Advanced Error Reporting > > > > > Capabilities: [148] Power Budgeting <?>Regards, > > > > > Capabilities: [158] Alternative Routing-ID Interpretation > > (ARI) > > > > > Capabilities: [168] #19 > > > > > Capabilities: [254] #16 > > > > > Capabilities: [284] Vendor Specific Information: ID=0002 > > Rev=1 > > > > > Len=100 <?> > > > > > Capabilities: [384] Vendor Specific Information: ID=0001 > > Rev=1 > > > > > Len=038 <?> > > > > > Capabilities: [3bc] #15 > > > > > Kernel driver in use: megaraid_sas > > > > > Kernel modules: megaraid_sas > > > > > > > > > > Regards, > > > > > Doru Iorgulescu > > > > > > > > Hi Doru, > > > > > > > > I have gone through the attached logs and observed some prints about > > > > hibernation failure. > > > > -- > > > > [ 3.788370] PM: Starting manual resume from disk > > > > [ 3.788375] PM: Hibernation image partition 8:9 present > > > > [ 3.788377] PM: Looking for hibernation image. > > > > [ 3.788638] PM: Image not found (code -22) > > > > [ 3.788640] PM: Hibernation image not present or could not be > > loaded. > > > > -- > > > > > > > > Is it the problem you are trying to point ? Please clarify. > > > > Is it regression from 4.14.20 to 4.9.82 due to megaraid_sas driver > > > > backporting > > > > ? > > > > > > > > > > > > Thanks, > > > > Sumit > > > > > > > > -- > > > > You are receiving this mail because: > > > > You reported the bug. > > > > -- > > You are receiving this mail because: > > You reported the bug. > > Created attachment 274281 [details] attachment-22179-0.html Hi, It must be in oficial kernel 4.9.82 Regards, Doru Iorgulescu On Tue, Feb 20, 2018 at 11:54 AM, <bugzilla-daemon@bugzilla.kernel.org> wrote: > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > --- Comment #5 from Sumit Saxena (sumit.saxena@broadcom.com) --- > (In reply to doru iorgulescu from comment #4) > > Created attachment 274279 [details] > > attachment-9893-0.html > > > > Not oficial, > > I have tested : > > I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to > > /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel > 4.9.82 > > and is OK ! > > You have the dmesg > > Regards, > > Doru Iorgulescu > > Ok, I don't see anything wrong in dmesg. MegaRAID adapter is successfully > initialized. If you run into any issue due to megaraid_sas driver, let me > know. > > Thanks, > Sumit > > > > > > On Tue, Feb 20, 2018 at 11:38 AM, <bugzilla-daemon@bugzilla.kernel.org> > > wrote: > > > > > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > > > > > --- Comment #3 from Sumit Saxena (sumit.saxena@broadcom.com) --- > > > (In reply to doru iorgulescu from comment #2) > > > > Created attachment 274275 [details] > > > > attachment-17443-0.html > > > > > > > > Hi, > > > > The problem is in kernel 4.9.82 > > > > #define MEGASAS_VERSION "06.811.02.00-rc1" > > > > For kernel 4.14.20 is OK > > > > #define MEGASAS_VERSION "07.702.06.00-rc1" > > > > > > ok, now with > > > #define MEGASAS_VERSION "07.702.06.00-rc1" > > > backported to kernel 4.9.82, issue is resolved in kernel 4.9.82, right > ? > > > > > > > > > Thanks, > > > Sumit > > > > > > > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID > Tri-Mode > > > > SAS3508 (rev 01) > > > > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 > > > (Integrated > > > > RAID Module RMSP3CD080F) > > > > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node > 0 > > > > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > > > > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > > > > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > > > > I/O ports at 8000 [size=256] > > > > Expansion ROM at <ignored> [disabled] > > > > Capabilities: [40] Power Management version 3 > > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > > > > Capabilities: [70] Express Endpoint, MSI 00 > > > > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > > > > Capabilities: [d0] Vital Product Data > > > > Capabilities: [100] Advanced Error Reporting > > > > Capabilities: [148] Power Budgeting <?>Regards, > > > > Capabilities: [158] Alternative Routing-ID Interpretation > (ARI) > > > > Capabilities: [168] #19 > > > > Capabilities: [254] #16 > > > > Capabilities: [284] Vendor Specific Information: ID=0002 > Rev=1 > > > > Len=100 <?> > > > > Capabilities: [384] Vendor Specific Information: ID=0001 > Rev=1 > > > > Len=038 <?> > > > > Capabilities: [3bc] #15 > > > > Kernel driver in use: megaraid_sas > > > > Kernel modules: megaraid_sas > > > > > > > > Regards, > > > > Doru Iorgulescu > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Feb 20, 2018 at 9:07 AM, <bugzilla-daemon@bugzilla. > kernel.org> > > > > wrote: > > > > > > > > > https://bugzilla.kernel.org/show_bug.cgi?id=198839 > > > > > > > > > > Sumit Saxena (sumit.saxena@broadcom.com) changed: > > > > > > > > > > What |Removed |Added > > > > > ------------------------------------------------------------ > > > > > ---------------- > > > > > CC| | > > > sumit.saxena@broadcom.com > > > > > > > > > > --- Comment #1 from Sumit Saxena (sumit.saxena@broadcom.com) --- > > > > > (In reply to doru iorgulescu from comment #0) > > > > > > Created attachment 274257 [details] > > > > > > Backport of the Linux MegaRAID driver for SAS based RAID > controllers > > > > > > > > > > > > Backport of the Linux MegaRAID driver for SAS based RAID > controllers > > > > > > > > > > > > backport of the megaraid_sas driver from kernel 4.14.20 to kernel > > > 4.9.82 > > > > > > > > > > > > Hi, > > > > > > > > > > > > Hardware: > > > > > > DMI: Intel Corporation S2600WFT/S2600WFT, BIOS > > > > > > SE5C620.86B.00.01.0009.101920170742 10/19/2017 > > > > > > > > > > > > I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to > > > > > > /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the > kernel > > > > > 4.9.82 > > > > > > and is OK ! > > > > > > I send dmesg atached. > > > > > > > > > > > > > > > > > > The problem for original linux kernel 4.9.82 is : > > > > > > > > > > > > 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID > > > Tri-Mode > > > > > > SAS3508 (rev 01) > > > > > > Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 > > > > > (Integrated > > > > > > RAID Module RMSP3CD080F) > > > > > > Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA > node > > > 0 > > > > > > Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] > > > > > > Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] > > > > > > Memory at b8800000 (32-bit, non-prefetchable) [size=1M] > > > > > > I/O ports at 8000 [size=256] > > > > > > Expansion ROM at <ignored> [disabled] > > > > > > Capabilities: [40] Power Management version 3 > > > > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ > 64bit+ > > > > > > Capabilities: [70] Express Endpoint, MSI 00 > > > > > > Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- > > > > > > Capabilities: [d0] Vital Product Data > > > > > > Capabilities: [100] Advanced Error Reporting > > > > > > Capabilities: [148] Power Budgeting <?>Regards, > > > > > > Capabilities: [158] Alternative Routing-ID Interpretation > > > (ARI) > > > > > > Capabilities: [168] #19 > > > > > > Capabilities: [254] #16 > > > > > > Capabilities: [284] Vendor Specific Information: ID=0002 > > > Rev=1 > > > > > > Len=100 <?> > > > > > > Capabilities: [384] Vendor Specific Information: ID=0001 > > > Rev=1 > > > > > > Len=038 <?> > > > > > > Capabilities: [3bc] #15 > > > > > > Kernel driver in use: megaraid_sas > > > > > > Kernel modules: megaraid_sas > > > > > > > > > > > > Regards, > > > > > > Doru Iorgulescu > > > > > > > > > > Hi Doru, > > > > > > > > > > I have gone through the attached logs and observed some prints > about > > > > > hibernation failure. > > > > > -- > > > > > [ 3.788370] PM: Starting manual resume from disk > > > > > [ 3.788375] PM: Hibernation image partition 8:9 present > > > > > [ 3.788377] PM: Looking for hibernation image. > > > > > [ 3.788638] PM: Image not found (code -22) > > > > > [ 3.788640] PM: Hibernation image not present or could not be > > > loaded. > > > > > -- > > > > > > > > > > Is it the problem you are trying to point ? Please clarify. > > > > > Is it regression from 4.14.20 to 4.9.82 due to megaraid_sas driver > > > > > backporting > > > > > ? > > > > > > > > > > > > > > > Thanks, > > > > > Sumit > > > > > > > > > > -- > > > > > You are receiving this mail because: > > > > > You reported the bug. > > > > > > -- > > > You are receiving this mail because: > > > You reported the bug. > > > > > -- > You are receiving this mail because: > You reported the bug. > |
Created attachment 274257 [details] Backport of the Linux MegaRAID driver for SAS based RAID controllers Backport of the Linux MegaRAID driver for SAS based RAID controllers backport of the megaraid_sas driver from kernel 4.14.20 to kernel 4.9.82 Hi, Hardware: DMI: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0009.101920170742 10/19/2017 I copy /usr/src/linux-4.14.20/drivers/scsi/megaraid to /usr/src/linux-4.9.82/drivers/scsi/megaraid . I compile the kernel 4.9.82 and is OK ! I send dmesg atached. The problem for original linux kernel 4.9.82 is : 5e:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3508 (rev 01) Subsystem: Intel Corporation MegaRAID Tri-Mode SAS3508 (Integrated RAID Module RMSP3CD080F) Flags: bus master, fast devsel, latency 0, IRQ 36, NUMA node 0 Memory at 38fffff00000 (64-bit, prefetchable) [size=1M] Memory at 38ffffe00000 (64-bit, prefetchable) [size=1M] Memory at b8800000 (32-bit, non-prefetchable) [size=1M] I/O ports at 8000 [size=256] Expansion ROM at <ignored> [disabled] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [148] Power Budgeting <?>Regards, Capabilities: [158] Alternative Routing-ID Interpretation (ARI) Capabilities: [168] #19 Capabilities: [254] #16 Capabilities: [284] Vendor Specific Information: ID=0002 Rev=1 Len=100 <?> Capabilities: [384] Vendor Specific Information: ID=0001 Rev=1 Len=038 <?> Capabilities: [3bc] #15 Kernel driver in use: megaraid_sas Kernel modules: megaraid_sas Regards, Doru Iorgulescu