Bug 194431

Summary: BBSwitch PCI - PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
Product: Drivers Reporter: Remy LABENE (remy.labene)
Component: PCIAssignee: drivers_pci (drivers_pci)
Status: REOPENED ---    
Severity: normal CC: jcubic, lv.zheng, mike, rui.zhang, yu.c.chen
Priority: P1    
Hardware: Intel   
OS: Linux   
Kernel Version: Linux PRT-MSIGP72 4.9.0-1-amd64 #1 SMP Debian 4.9.2-2 (2017-01-12) x86_64 GNU/Linux Tree: Mainline
Regression: No
Attachments: dsdt table
acpidump.out
dmesg kernel build 4.10.5
another dmesg
dmesg with grub options acpi_osi=! acpi_osi="Windows 2009"
dmesg with the new daemon irqbalance

Description Remy LABENE 2017-02-07 14:27:24 UTC
Hello,

I install a Debian linux 9 on my laptop MSI GP72 6QE but I have a bug with ACPI. When I use acpi=off to the grub boot the problem is solved but I lost many fonctionality (touchpad, battery informations, Fn + specific key ...). 

The major problem is bbswitch for optimus technologie (with nouveau driver or nvidia driver). The laptop can't boot without acpi=off option in grub.

see my dmesg error below (nouveau + i915 driver without bbswitch)  :

at boot

[ 1672.999612] pcieport 0000:00:1c.0:   device [8086:a110] error status/mask=00000001/00002000
[ 1672.999617] pcieport 0000:00:1c.0:    [ 0] Receiver Error         (First)
[ 1739.684166] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 1739.684175] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[ 1739.684182] pcieport 0000:00:1c.0:   device [8086:a110] error status/mask=00000001/00002000
[ 1739.684187] pcieport 0000:00:1c.0:    [ 0] Receiver Error         (First)

later ...

5.181423] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[    5.181433] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[    5.181439] pcieport 0000:00:1c.0:   device [8086:a110] error status/mask=00000001/00002000
[    5.181443] pcieport 0000:00:1c.0:    [ 0] Receiver Error         (First)
[    5.188629] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Comment 1 Remy LABENE 2017-02-07 21:56:31 UTC
root@PRT-MSIGP72:/home/remy# acpixtract -a acpidump.out

Intel ACPI Component Architecture
ACPI Binary Table Extraction Utility version 20160831-64
Copyright (c) 2000 - 2016 Intel Corporation

Acpi table [SSDT] -   21867 bytes written to ssdt1.dat
Acpi table [MCFG] -      60 bytes written to mcfg.dat
Acpi table [SSDT] -    1187 bytes written to ssdt2.dat
Acpi table [ASF!] -     165 bytes written to asf!.dat
Acpi table [APIC] -     188 bytes written to apic.dat
Acpi table [SSDT] -    1514 bytes written to ssdt3.dat
Acpi table [SLIC] -     374 bytes written to slic.dat
Acpi table [SSDT] -   11182 bytes written to ssdt4.dat
Acpi table [SSDT] -    5051 bytes written to ssdt5.dat
Acpi table [UEFI] -      66 bytes written to uefi.dat
Acpi table [DSDT] -  153247 bytes written to dsdt.dat
Acpi table [LPIT] -     148 bytes written to lpit.dat
Acpi table [SSDT] -    3699 bytes written to ssdt6.dat
Acpi table [DBG2] -      84 bytes written to dbg2.dat
Acpi table [SSDT] -    1586 bytes written to ssdt7.dat
Acpi table [FACP] -     268 bytes written to facp.dat
Acpi table [FPDT] -      68 bytes written to fpdt.dat
Acpi table [SSDT] -    3043 bytes written to ssdt8.dat
Acpi table [SSDT] -     584 bytes written to ssdt9.dat
Acpi table [DBGP] -      52 bytes written to dbgp.dat
Acpi table [SSDT] -     159 bytes written to ssdt10.dat
Acpi table [HPET] -      56 bytes written to hpet.dat
Acpi table [FIDT] -     156 bytes written to fidt.dat
Acpi table [FACS] -      64 bytes written to facs.dat

24 binary ACPI tables extracted
root@PRT-MSIGP72:/home/remy# acpixtract -a acpidump.out > TABLE.dat
root@PRT-MSIGP72:/home/remy# iasl -d TABLE.dat  

Intel ACPI Component Architecture
ASL+ Optimizing Compiler version 20160831-64
Copyright (c) 2000 - 2016 Intel Corporation

Input file TABLE.dat, Length 0x5C5 (1477) bytes
    TABLE.dat: File does not appear to contain a valid AML table
Could not get ACPI tables from TABLE.dat, AE_TYPE
Comment 2 Remy LABENE 2017-02-07 22:02:52 UTC
/*
 * Intel ACPI Component Architecture
 * AML/ASL+ Disassembler version 20160831-64
 * Copyright (c) 2000 - 2016 Intel Corporation
 * 
 * Disassembly of apic.dat, Tue Feb  7 23:00:06 2017
 *
 * ACPI Data Table [APIC]
 *
 * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
 */

[000h 0000   4]                    Signature : "APIC"    [Multiple APIC Description Table (MADT)]
[004h 0004   4]                 Table Length : 000000BC
[008h 0008   1]                     Revision : 03
[009h 0009   1]                     Checksum : BA
[00Ah 0010   6]                       Oem ID : "MSI_NB"
[010h 0016   8]                 Oem Table ID : "MEGABOOK"
[018h 0024   4]                 Oem Revision : 01072009
[01Ch 0028   4]              Asl Compiler ID : "AMI "
[020h 0032   4]        Asl Compiler Revision : 00010013

[024h 0036   4]           Local Apic Address : FEE00000
[028h 0040   4]        Flags (decoded below) : 00000001
                         PC-AT Compatibility : 1

[02Ch 0044   1]                Subtable Type : 00 [Processor Local APIC]
[02Dh 0045   1]                       Length : 08
[02Eh 0046   1]                 Processor ID : 01
[02Fh 0047   1]                Local Apic ID : 00
[030h 0048   4]        Flags (decoded below) : 00000001
                           Processor Enabled : 1

[034h 0052   1]                Subtable Type : 04 [Local APIC NMI]
[035h 0053   1]                       Length : 06
[036h 0054   1]                 Processor ID : 01
[037h 0055   2]        Flags (decoded below) : 0005
                                    Polarity : 1
                                Trigger Mode : 1
[039h 0057   1]         Interrupt Input LINT : 01

[03Ah 0058   1]                Subtable Type : 00 [Processor Local APIC]
[03Bh 0059   1]                       Length : 08
[03Ch 0060   1]                 Processor ID : 02
[03Dh 0061   1]                Local Apic ID : 02
[03Eh 0062   4]        Flags (decoded below) : 00000001
                           Processor Enabled : 1

[042h 0066   1]                Subtable Type : 04 [Local APIC NMI]
[043h 0067   1]                       Length : 06
[044h 0068   1]                 Processor ID : 02
[045h 0069   2]        Flags (decoded below) : 0005
                                    Polarity : 1
                                Trigger Mode : 1
[047h 0071   1]         Interrupt Input LINT : 01

[048h 0072   1]                Subtable Type : 00 [Processor Local APIC]
[049h 0073   1]                       Length : 08
[04Ah 0074   1]                 Processor ID : 03
[04Bh 0075   1]                Local Apic ID : 04
[04Ch 0076   4]        Flags (decoded below) : 00000001
                           Processor Enabled : 1

[050h 0080   1]                Subtable Type : 04 [Local APIC NMI]
[051h 0081   1]                       Length : 06
[052h 0082   1]                 Processor ID : 03
[053h 0083   2]        Flags (decoded below) : 0005
                                    Polarity : 1
                                Trigger Mode : 1
[055h 0085   1]         Interrupt Input LINT : 01

[056h 0086   1]                Subtable Type : 00 [Processor Local APIC]
[057h 0087   1]                       Length : 08
[058h 0088   1]                 Processor ID : 04
[059h 0089   1]                Local Apic ID : 06
[05Ah 0090   4]        Flags (decoded below) : 00000001
                           Processor Enabled : 1

[05Eh 0094   1]                Subtable Type : 04 [Local APIC NMI]
[05Fh 0095   1]                       Length : 06
[060h 0096   1]                 Processor ID : 04
[061h 0097   2]        Flags (decoded below) : 0005
                                    Polarity : 1
                                Trigger Mode : 1
[063h 0099   1]         Interrupt Input LINT : 01

[064h 0100   1]                Subtable Type : 00 [Processor Local APIC]
[065h 0101   1]                       Length : 08
[066h 0102   1]                 Processor ID : 05
[067h 0103   1]                Local Apic ID : 01
[068h 0104   4]        Flags (decoded below) : 00000001
                           Processor Enabled : 1

[06Ch 0108   1]                Subtable Type : 04 [Local APIC NMI]
[06Dh 0109   1]                       Length : 06
[06Eh 0110   1]                 Processor ID : 05
[06Fh 0111   2]        Flags (decoded below) : 0005
                                    Polarity : 1
                                Trigger Mode : 1
[071h 0113   1]         Interrupt Input LINT : 01

[072h 0114   1]                Subtable Type : 00 [Processor Local APIC]
[073h 0115   1]                       Length : 08
[074h 0116   1]                 Processor ID : 06
[075h 0117   1]                Local Apic ID : 03
[076h 0118   4]        Flags (decoded below) : 00000001
                           Processor Enabled : 1

[07Ah 0122   1]                Subtable Type : 04 [Local APIC NMI]
[07Bh 0123   1]                       Length : 06
[07Ch 0124   1]                 Processor ID : 06
[07Dh 0125   2]        Flags (decoded below) : 0005
                                    Polarity : 1
                                Trigger Mode : 1
[07Fh 0127   1]         Interrupt Input LINT : 01

[080h 0128   1]                Subtable Type : 00 [Processor Local APIC]
[081h 0129   1]                       Length : 08
[082h 0130   1]                 Processor ID : 07
[083h 0131   1]                Local Apic ID : 05
[084h 0132   4]        Flags (decoded below) : 00000001
                           Processor Enabled : 1

[088h 0136   1]                Subtable Type : 04 [Local APIC NMI]
[089h 0137   1]                       Length : 06
[08Ah 0138   1]                 Processor ID : 07
[08Bh 0139   2]        Flags (decoded below) : 0005
                                    Polarity : 1
                                Trigger Mode : 1
[08Dh 0141   1]         Interrupt Input LINT : 01

[08Eh 0142   1]                Subtable Type : 00 [Processor Local APIC]
[08Fh 0143   1]                       Length : 08
[090h 0144   1]                 Processor ID : 08
[091h 0145   1]                Local Apic ID : 07
[092h 0146   4]        Flags (decoded below) : 00000001
                           Processor Enabled : 1

[096h 0150   1]                Subtable Type : 04 [Local APIC NMI]
[097h 0151   1]                       Length : 06
[098h 0152   1]                 Processor ID : 08
[099h 0153   2]        Flags (decoded below) : 0005
                                    Polarity : 1
                                Trigger Mode : 1
[09Bh 0155   1]         Interrupt Input LINT : 01

[09Ch 0156   1]                Subtable Type : 01 [I/O APIC]
[09Dh 0157   1]                       Length : 0C
[09Eh 0158   1]                  I/O Apic ID : 02
[09Fh 0159   1]                     Reserved : 00
[0A0h 0160   4]                      Address : FEC00000
[0A4h 0164   4]                    Interrupt : 00000000

[0A8h 0168   1]                Subtable Type : 02 [Interrupt Source Override]
[0A9h 0169   1]                       Length : 0A
[0AAh 0170   1]                          Bus : 00
[0ABh 0171   1]                       Source : 00
[0ACh 0172   4]                    Interrupt : 00000002
[0B0h 0176   2]        Flags (decoded below) : 0000
                                    Polarity : 0
                                Trigger Mode : 0

[0B2h 0178   1]                Subtable Type : 02 [Interrupt Source Override]
[0B3h 0179   1]                       Length : 0A
[0B4h 0180   1]                          Bus : 00
[0B5h 0181   1]                       Source : 09
[0B6h 0182   4]                    Interrupt : 00000009
[0BAh 0186   2]        Flags (decoded below) : 000D
                                    Polarity : 1
                                Trigger Mode : 3

Raw Table Data: Length 188 (0xBC)

  0000: 41 50 49 43 BC 00 00 00 03 BA 4D 53 49 5F 4E 42  // APIC......MSI_NB
  0010: 4D 45 47 41 42 4F 4F 4B 09 20 07 01 41 4D 49 20  // MEGABOOK. ..AMI 
  0020: 13 00 01 00 00 00 E0 FE 01 00 00 00 00 08 01 00  // ................
  0030: 01 00 00 00 04 06 01 05 00 01 00 08 02 02 01 00  // ................
  0040: 00 00 04 06 02 05 00 01 00 08 03 04 01 00 00 00  // ................
  0050: 04 06 03 05 00 01 00 08 04 06 01 00 00 00 04 06  // ................
  0060: 04 05 00 01 00 08 05 01 01 00 00 00 04 06 05 05  // ................
  0070: 00 01 00 08 06 03 01 00 00 00 04 06 06 05 00 01  // ................
  0080: 00 08 07 05 01 00 00 00 04 06 07 05 00 01 00 08  // ................
  0090: 08 07 01 00 00 00 04 06 08 05 00 01 01 0C 02 00  // ................
  00A0: 00 00 C0 FE 00 00 00 00 02 0A 00 00 02 00 00 00  // ................
  00B0: 00 00 02 0A 00 09 09 00 00 00 0D 00              // ............
Comment 3 Remy LABENE 2017-02-08 11:56:58 UTC
Result of lspci -nn (acpi=off)

00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:1910] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:191b] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] [8086:a103] (rev 31)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1)
00:1c.3 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #4 [8086:a113] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a14e] (rev 31)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 950M] [10de:139a] (rev a2)
02:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 81)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller [1969:e0a1] (rev 10)
Comment 4 Remy LABENE 2017-02-10 23:46:22 UTC
journalctl -r -p err

-- Logs begin at Sat 2017-02-11 00:31:09 CET, end at Sat 2017-02-11 00:42:48 CET. --
févr. 11 00:31:23 PRT-MSIGP72 bluetoothd[3656]: sap-server: Operation not permitted (1)
févr. 11 00:31:23 PRT-MSIGP72 bluetoothd[3656]: Sap driver initialization failed.
févr. 11 00:31:23 PRT-MSIGP72 bluetoothd[3656]: Failed to obtain handles for "Service Changed" characteristic
févr. 11 00:31:22 PRT-MSIGP72 pulseaudio[3652]: [pulseaudio] pid.c: Daemon already running.
févr. 11 00:31:22 PRT-MSIGP72 pulseaudio[3650]: [pulseaudio] pid.c: Daemon already running.
févr. 11 00:31:11 PRT-MSIGP72 laptop-mode[3124]: Failed to re-set power saving mode for wireless card
févr. 11 00:31:11 PRT-MSIGP72 laptop-mode[2517]: Failed to re-set power saving mode for wireless card
févr. 11 00:31:11 PRT-MSIGP72 avahi-daemon[2231]: chroot.c: open() failed: No such file or directory
févr. 11 00:31:10 PRT-MSIGP72 laptop-mode[1809]: Failed to re-set power saving mode for wireless card
févr. 11 00:31:09 PRT-MSIGP72 kernel: iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-23.ucode (-2)
févr. 11 00:31:09 PRT-MSIGP72 kernel: iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-24.ucode (-2)
févr. 11 00:31:09 PRT-MSIGP72 kernel: iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-25.ucode (-2)
févr. 11 00:31:09 PRT-MSIGP72 kernel: iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-26.ucode (-2)
févr. 11 00:31:09 PRT-MSIGP72 kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff89fe360e8528), AE_NOT_EXIST (20160831/psparse-543)
févr. 11 00:31:09 PRT-MSIGP72 kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
févr. 11 00:31:09 PRT-MSIGP72 kernel: ACPI Error: No handler for Region [EC__] (ffff89fe360e7ca8) [EmbeddedControl] (20160831/evregion-166)
Comment 5 Chen Yu 2017-02-13 02:14:15 UTC
Adding @Lv Zheng for help, seems EC._REG failed and no handler for EC has been installed.
Comment 6 Remy LABENE 2017-02-14 22:00:44 UTC
Created attachment 254755 [details]
dsdt table
Comment 7 Remy LABENE 2017-02-14 22:02:12 UTC
May be the warning in dsdt table can help you ?
Comment 8 Remy LABENE 2017-02-14 22:24:29 UTC
See the warning  in many table : 
External (*, MethodObj)    // Warning: Unknown method, guessing 2 arguments

What is the MethoObj argument ?
Comment 9 Lv Zheng 2017-02-28 01:25:36 UTC
(In reply to Remy LABENE from comment #1)
> root@PRT-MSIGP72:/home/remy# acpixtract -a acpidump.out

Could you also upload a copy of the acpidump.out here?

Thanks
Lv
Comment 10 Lv Zheng 2017-02-28 01:29:29 UTC
(In reply to Remy LABENE from comment #4)
> journalctl -r -p err
> 
> févr. 11 00:31:09 PRT-MSIGP72 kernel: ACPI Error: Method parse/execution
> failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff89fe360e8528), AE_NOT_EXIST
> (20160831/psparse-543)
> févr. 11 00:31:09 PRT-MSIGP72 kernel: ACPI Error: Region EmbeddedControl
> (ID=3) has no handler (20160831/exfldio-299)
> févr. 11 00:31:09 PRT-MSIGP72 kernel: ACPI Error: No handler for Region
> [EC__] (ffff89fe360e7ca8) [EmbeddedControl] (20160831/evregion-166)

Could you upload a post-boot full dmesg output here.
Unfortunately the useful information should just be in several lines prior than these ones.

Thanks
Lv
Comment 11 Remy LABENE 2017-02-28 09:26:24 UTC
Created attachment 254975 [details]
acpidump.out

acpidump.out file
Comment 12 Remy LABENE 2017-02-28 10:57:12 UTC
[    0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22
[    0.000000] Linux version 4.9.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170124 (Debian 6.3.0-5) ) #1 SMP Debian 4.9.6-3 (2017-01-28)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-1-amd64 root=UUID=38a76b1f-08a3-4060-a43e-af63f2a2c01c ro pcie_aspm=off quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000764b1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000764b2000-0x00000000764b2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000764b3000-0x00000000764fcfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000764fd000-0x0000000079a5efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079a5f000-0x000000007a4f0fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a4f1000-0x000000007a6b6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a6b7000-0x000000007ae86fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ae87000-0x000000007b2fefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b2ff000-0x000000007b2fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b300000-0x000000007b3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. GP72 6QE/MS-1795, BIOS E1795IMS.118 12/06/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7b300 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc30-0x000fcc3f] mapped at [ffff8917000fcc30]
[    0.000000] Base memory trampoline at [ffff891700096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x12234c000, 0x12234cfff] PGTABLE
[    0.000000] BRK [0x12234d000, 0x12234dfff] PGTABLE
[    0.000000] BRK [0x12234e000, 0x12234efff] PGTABLE
[    0.000000] BRK [0x12234f000, 0x12234ffff] PGTABLE
[    0.000000] BRK [0x122350000, 0x122350fff] PGTABLE
[    0.000000] BRK [0x122351000, 0x122351fff] PGTABLE
[    0.000000] BRK [0x122352000, 0x122352fff] PGTABLE
[    0.000000] BRK [0x122353000, 0x122353fff] PGTABLE
[    0.000000] BRK [0x122354000, 0x122354fff] PGTABLE
[    0.000000] BRK [0x122355000, 0x122355fff] PGTABLE
[    0.000000] BRK [0x122356000, 0x122356fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35b0f000-0x36d7efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x000000007A8BF0A8 0000CC (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007A8E48A8 00010C (v05 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007A8BF208 02569F (v02 MSI_NB MEGABOOK 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000007AE86F80 000040
[    0.000000] ACPI: APIC 0x000000007A8E49B8 0000BC (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007A8E4A78 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007A8E4AC0 00009C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007A8E4B60 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007A8E4BA0 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 0005000B)
[    0.000000] ACPI: LPIT 0x000000007A8E4BD8 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A8E4C70 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007A8E4EB8 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007A8E7A68 000BE3 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007A8E8650 0004A3 (v02 INTEL  zpodd    00001000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x000000007A8E8AF8 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000007A8E8B30 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A8E8B88 000632 (v02 INTEL  xh_rvp11 00000000 INTL 20120913)
[    0.000000] ACPI: SLIC 0x000000007A8E91C0 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007A8E9338 00556B (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x000000007A8EE8A8 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x000000007A8EE8F0 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007A8EF768 00009F (v02 SgRef  SgPeg    00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007A8EF808 0013BB (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.000000] ACPI: ASF! 0x000000007A8F0BC8 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27effb000-0x27effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000764b1fff]
[    0.000000]   node   0: [mem 0x00000000764fd000-0x0000000079a5efff]
[    0.000000]   node   0: [mem 0x000000007a4f1000-0x000000007a6b6fff]
[    0.000000]   node   0: [mem 0x000000007b2ff000-0x000000007b2fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.000000] On node 0 totalpages: 2067318
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7728 pages used for memmap
[    0.000000]   DMA32 zone: 494555 pages, LIFO batch:31
[    0.000000]   Normal zone: 24512 pages used for memmap
[    0.000000]   Normal zone: 1568768 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x764b2000-0x764b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x764b3000-0x764fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x79a5f000-0x7a4f0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a6b7000-0x7ae86fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ae87000-0x7b2fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b300000-0x7b3fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b400000-0x7bffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff89197ec00000 s103768 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s103768 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2034993
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-1-amd64 root=UUID=38a76b1f-08a3-4060-a43e-af63f2a2c01c ro pcie_aspm=off quiet
[    0.000000] PCIe ASPM is disabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8036368K/8269272K available (6146K kernel code, 1134K rwdata, 2844K rodata, 1392K init, 812K bss, 232904K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:2048 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2600.000 MHz processor
[    0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000)
[    0.000018] pid_max: default: 32768 minimum: 301
[    0.000030] ACPI: Core revision 20160831
[    0.028984] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.029021] Security Framework initialized
[    0.029022] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.029025] AppArmor: AppArmor disabled by boot time parameter
[    0.029317] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.030555] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031115] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031120] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031319] CPU: Physical Processor ID: 0
[    0.031319] CPU: Processor Core ID: 0
[    0.031322] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.031323] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.031326] mce: CPU supports 10 MCE banks
[    0.031334] CPU0: Thermal monitoring enabled (TM1)
[    0.031349] process: using mwait in idle threads
[    0.031350] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.031351] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.031927] Freeing SMP alternatives memory: 24K (ffffffff8d679000 - ffffffff8d67f000)
[    0.033677] ftrace: allocating 24999 entries in 98 pages
[    0.041375] smpboot: Max logical packages: 2
[    0.042575] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.045589] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.085276] TSC deadline timer enabled
[    0.085281] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.085283] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.085307] ... version:                4
[    0.085307] ... bit width:              48
[    0.085308] ... generic registers:      4
[    0.085308] ... value mask:             0000ffffffffffff
[    0.085309] ... max period:             00007fffffffffff
[    0.085309] ... fixed-purpose events:   3
[    0.085309] ... event mask:             000000070000000f
[    0.085740] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.085802] x86: Booting SMP configuration:
[    0.085803] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.647451] x86: Booted up 1 node, 8 CPUs
[    0.647453] smpboot: Total of 8 processors activated (41478.14 BogoMIPS)
[    0.653237] devtmpfs: initialized
[    0.653278] x86/mm: Memory block size: 128MB
[    0.654758] PM: Registering ACPI NVS region [mem 0x764b2000-0x764b2fff] (4096 bytes)
[    0.654759] PM: Registering ACPI NVS region [mem 0x7a6b7000-0x7ae86fff] (8192000 bytes)
[    0.654898] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.654929] pinctrl core: initialized pinctrl subsystem
[    0.655002] NET: Registered protocol family 16
[    0.668965] cpuidle: using governor ladder
[    0.684968] cpuidle: using governor menu
[    0.684992] ACPI: bus type PCI registered
[    0.684993] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.685043] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.685044] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.685053] PCI: Using configuration type 1 for base access
[    0.697041] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.697042] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.697205] ACPI: Added _OSI(Module Device)
[    0.697205] ACPI: Added _OSI(Processor Device)
[    0.697206] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.697206] ACPI: Added _OSI(Processor Aggregator Device)
[    0.698372] ACPI: Executed 27 blocks of module-level executable AML code
[    0.704964] ACPI Error: No handler for Region [EC__] (ffff8919760e7828) [EmbeddedControl] (20160831/evregion-166)
[    0.705106] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
[    0.705238] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff8919760e8000), AE_NOT_EXIST (20160831/psparse-543)
[    0.706633] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.709941] ACPI: Dynamic OEM Table Load:
[    0.709945] ACPI: SSDT 0xFFFF891974F72000 0005EA (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.710122] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.711683] ACPI: Dynamic OEM Table Load:
[    0.711687] ACPI: SSDT 0xFFFF891974C48800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.715303] ACPI : EC: EC started
[    0.809678] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.809679] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.809680] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.809680] ACPI: Interpreter enabled
[    0.809718] ACPI: (supports S0 S3 S4 S5)
[    0.809718] ACPI: Using IOAPIC for interrupt routing
[    0.809752] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.811936] ACPI: Power Resource [PG00] (on)
[    0.812642] ACPI: Power Resource [PG01] (on)
[    0.812999] ACPI: Power Resource [PG02] (on)
[    0.909749] ACPI: Power Resource [WRST] (on)
[    0.910069] ACPI: Power Resource [WRST] (on)
[    0.910387] ACPI: Power Resource [WRST] (on)
[    0.910705] ACPI: Power Resource [WRST] (on)
[    0.911022] ACPI: Power Resource [WRST] (on)
[    0.911342] ACPI: Power Resource [WRST] (on)
[    0.911658] ACPI: Power Resource [WRST] (on)
[    0.911975] ACPI: Power Resource [WRST] (on)
[    0.912293] ACPI: Power Resource [WRST] (on)
[    0.912608] ACPI: Power Resource [WRST] (on)
[    0.912924] ACPI: Power Resource [WRST] (on)
[    0.913245] ACPI: Power Resource [WRST] (on)
[    0.913563] ACPI: Power Resource [WRST] (on)
[    0.913879] ACPI: Power Resource [WRST] (on)
[    0.914195] ACPI: Power Resource [WRST] (on)
[    0.914511] ACPI: Power Resource [WRST] (on)
[    0.914826] ACPI: Power Resource [WRST] (on)
[    0.915142] ACPI: Power Resource [WRST] (on)
[    0.915458] ACPI: Power Resource [WRST] (on)
[    0.915773] ACPI: Power Resource [WRST] (on)
[    0.923077] ACPI: Power Resource [FN00] (off)
[    0.923160] ACPI: Power Resource [FN01] (off)
[    0.923243] ACPI: Power Resource [FN02] (off)
[    0.923324] ACPI: Power Resource [FN03] (off)
[    0.923404] ACPI: Power Resource [FN04] (off)
[    0.924479] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.924483] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[    0.924567] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.925193] PCI host bridge to bus 0000:00
[    0.925195] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.925196] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.925197] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.925197] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.925198] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window]
[    0.925199] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.925200] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.925207] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    0.925520] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.925554] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.925676] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.925729] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    0.925736] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.925740] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.925744] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.925926] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.925942] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[    0.926002] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.926164] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.926200] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.926215] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[    0.926372] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.926385] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[    0.926434] pci 0000:00:16.0: PME# supported from D3hot
[    0.926574] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.926586] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[    0.926592] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[    0.926598] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.926604] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.926610] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.926617] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[    0.926652] pci 0000:00:17.0: PME# supported from D3hot
[    0.926785] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.926837] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.926955] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.926991] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.927044] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.927159] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.927208] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[    0.927420] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.927430] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[    0.927597] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.927617] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[    0.927647] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[    0.927693] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.927849] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.927885] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.927931] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[    0.928000] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.928225] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200
[    0.928233] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.928240] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.928246] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.928251] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.928255] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.928333] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.928358] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.928359] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.928361] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.928363] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.928477] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[    0.928510] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[    0.928678] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.928765] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.928786] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.928789] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.928876] pci 0000:03:00.0: [1969:e0a1] type 00 class 0x020000
[    0.928898] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff 64bit]
[    0.928907] pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.929005] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.929067] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.929088] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.929090] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.929092] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.978646] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.978693] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.978737] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.978780] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.978823] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.978866] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.978909] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.978952] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.979370] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.979478] ACPI : EC: event unblocked
[    0.979489] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.979490] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.979672] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.979672] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.979674] vgaarb: loaded
[    0.979675] vgaarb: bridge control possible 0000:00:02.0
[    0.979722] PCI: Using ACPI for IRQ routing
[    1.007746] PCI: pci_cache_line_size set to 64 bytes
[    1.007791] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[    1.007792] e820: reserve RAM buffer [mem 0x764b2000-0x77ffffff]
[    1.007793] e820: reserve RAM buffer [mem 0x79a5f000-0x7bffffff]
[    1.007794] e820: reserve RAM buffer [mem 0x7a6b7000-0x7bffffff]
[    1.007794] e820: reserve RAM buffer [mem 0x7b300000-0x7bffffff]
[    1.007795] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    1.007941] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.007944] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    1.009985] clocksource: Switched to clocksource hpet
[    1.014334] VFS: Disk quotas dquot_6.6.0
[    1.014351] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.014403] pnp: PnP ACPI init
[    1.014488] pnp 00:00: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
[    1.014519] pnp 00:01: Plug and Play ACPI device, IDs SYN1507 SYN1500 SYN0002 PNP0f13 (active)
[    1.014615] system 00:02: [io  0x0680-0x069f] has been reserved
[    1.014616] system 00:02: [io  0xffff] has been reserved
[    1.014617] system 00:02: [io  0xffff] has been reserved
[    1.014618] system 00:02: [io  0xffff] has been reserved
[    1.014619] system 00:02: [io  0x1800-0x18fe] has been reserved
[    1.014620] system 00:02: [io  0x164e-0x164f] has been reserved
[    1.014621] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.014690] system 00:03: [io  0x0800-0x087f] has been reserved
[    1.014692] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.014706] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.014732] system 00:05: [io  0x1854-0x1857] has been reserved
[    1.014733] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.015295] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.015297] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.015297] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.015298] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    1.015299] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.015300] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.015301] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.015302] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    1.015303] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.015304] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[    1.015306] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.015336] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    1.015338] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    1.015339] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    1.015340] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    1.015341] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    1.015342] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    1.015342] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    1.015344] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.015577] system 00:08: [io  0xff00-0xfffe] has been reserved
[    1.015578] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.016453] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    1.016453] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    1.016454] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    1.016455] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.017123] pnp: PnP ACPI: found 10 devices
[    1.023739] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.023754] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.023756] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.023758] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    1.023759] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.023762] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.023764] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    1.023769] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.023770] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    1.023772] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    1.023777] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.023778] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.023779] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.023779] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    1.023780] pci_bus 0000:00: resource 8 [mem 0xfc000000-0xfc00ffff window]
[    1.023781] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
[    1.023781] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    1.023782] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    1.023783] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.023783] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[    1.023784] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    1.023785] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[    1.023921] NET: Registered protocol family 2
[    1.024037] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.024121] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.024253] TCP: Hash tables configured (established 65536 bind 65536)
[    1.024268] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.024287] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.024328] NET: Registered protocol family 1
[    1.024337] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.024536] PCI: CLS 0 bytes, default 64
[    1.024562] Unpacking initramfs...
[    1.265659] Freeing initrd memory: 18880K (ffff891735b0f000 - ffff891736d7f000)
[    1.265662] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.265663] software IO TLB [mem 0x724b2000-0x764b2000] (64MB) mapped at [ffff8917724b2000-ffff8917764b1fff]
[    1.265976] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.266072] audit: initializing netlink subsys (disabled)
[    1.266084] audit: type=2000 audit(1488268115.264:1): initialized
[    1.266318] Initialise system trusted keyrings
[    1.266431] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.266542] zbud: loaded
[    1.293733] Key type asymmetric registered
[    1.293734] Asymmetric key parser 'x509' registered
[    1.293752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.293794] io scheduler noop registered
[    1.293794] io scheduler deadline registered
[    1.293798] io scheduler cfq registered (default)
[    1.294217] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.294220] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.294230] intel_idle: MWAIT substates: 0x11142120
[    1.294230] intel_idle: v0.4.1 model 0x5E
[    1.294524] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.294666] GHES: HEST is not enabled!
[    1.294702] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.295032] Linux agpgart interface v0.103
[    1.295058] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.295059] AMD IOMMUv2 functionality not available on this system
[    1.295539] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.299495] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.299497] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.299581] mousedev: PS/2 mouse device common for all mice
[    1.299616] rtc_cmos 00:04: RTC can wake from S4
[    1.299979] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.300057] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.300061] intel_pstate: Intel P-state driver initializing
[    1.300476] intel_pstate: HWP enabled
[    1.300761] ledtrig-cpu: registered to indicate activity on CPUs
[    1.301415] NET: Registered protocol family 10
[    1.301729] mip6: Mobile IPv6
[    1.301733] NET: Registered protocol family 17
[    1.301735] mpls_gso: MPLS GSO support
[    1.301939] microcode: sig=0x506e3, pf=0x20, revision=0x9e
[    1.302330] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.302613] registered taskstats version 1
[    1.302614] Loading compiled-in X.509 certificates
[    1.304057] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.304305] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.304316] zswap: loaded using pool lzo/zbud
[    1.305322] rtc_cmos 00:04: setting system clock to 2017-02-28 07:48:36 UTC (1488268116)
[    1.305391] PM: Hibernation image not present or could not be loaded.
[    1.306345] Freeing unused kernel memory: 1392K (ffffffff8d51d000 - ffffffff8d679000)
[    1.306346] Write protecting the kernel read-only data: 12288k
[    1.306774] Freeing unused kernel memory: 2028K (ffff891821a05000 - ffff891821c00000)
[    1.308363] Freeing unused kernel memory: 1252K (ffff891821ec7000 - ffff891822000000)
[    1.309937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.311459] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.320251] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.320326] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.320331] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.320857] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.320872] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.321601] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.321631] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.321638] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.321795] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.321822] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.334694] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.338368] hidraw: raw HID events driver (C) Jiri Kosina
[    1.351086] thermal LNXTHERM:00: registered as thermal_zone0
[    1.351086] ACPI: Thermal Zone [THRM] (35 C)
[    1.351286] thermal LNXTHERM:01: registered as thermal_zone1
[    1.351287] ACPI: Thermal Zone [TZ00] (28 C)
[    1.351382] thermal LNXTHERM:02: registered as thermal_zone2
[    1.351383] ACPI: Thermal Zone [TZ01] (30 C)
[    1.355197] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.356326] SCSI subsystem initialized
[    1.356346] ACPI: bus type USB registered
[    1.356364] usbcore: registered new interface driver usbfs
[    1.356372] usbcore: registered new interface driver hub
[    1.356398] usbcore: registered new device driver usb
[    1.360239] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.360244] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.361495] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.361499] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.361592] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.361593] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.361594] usb usb1: Product: xHCI Host Controller
[    1.361595] usb usb1: Manufacturer: Linux 4.9.0-1-amd64 xhci-hcd
[    1.361596] usb usb1: SerialNumber: 0000:00:14.0
[    1.361714] hub 1-0:1.0: USB hub found
[    1.361731] hub 1-0:1.0: 16 ports detected
[    1.363508] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:f4:1a:31]
[    1.364248] libata version 3.00 loaded.
[    1.365152] AVX2 version of gcm_enc/dec engaged.
[    1.365152] AES CTR mode by8 optimization enabled
[    1.374942] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.374946] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.374982] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.374982] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.374983] usb usb2: Product: xHCI Host Controller
[    1.374984] usb usb2: Manufacturer: Linux 4.9.0-1-amd64 xhci-hcd
[    1.374984] usb usb2: SerialNumber: 0000:00:14.0
[    1.375100] hub 2-0:1.0: USB hub found
[    1.375155] hub 2-0:1.0: 8 ports detected
[    1.381164] alx 0000:03:00.0 enp3s0: renamed from eth0
[    1.382301] ahci 0000:00:17.0: version 3.0
[    1.392681] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.392682] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    1.426601] scsi host0: ahci
[    1.426933] scsi host1: ahci
[    1.427290] scsi host2: ahci
[    1.427412] scsi host3: ahci
[    1.427458] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 122
[    1.427459] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 122
[    1.427460] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 122
[    1.427461] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 122
[    1.702076] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[    1.742301] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.742332] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.742362] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.742391] ata2: SATA link down (SStatus 4 SControl 300)
[    1.742733] ata1.00: supports DRM functions and may not be fully accessible
[    1.743065] ata4.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[    1.743068] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.743635] ata1.00: ATA-10: Crucial_CT525MX300SSD4,  M0CR031, max UDMA/133
[    1.743640] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.743889] ata4.00: configured for UDMA/133
[    1.744403] ata1.00: supports DRM functions and may not be fully accessible
[    1.744974] ata3.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[    1.745894] ata1.00: configured for UDMA/133
[    1.746567] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT525MX3 R031 PQ: 0 ANSI: 5
[    1.748533] ata3.00: configured for UDMA/133
[    1.782109] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUD0N     1.00 PQ: 0 ANSI: 5
[    1.796223] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[    1.845002] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00
[    1.845007] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[    1.845011] usb 1-7: Product: MSI EPF USB
[    1.845014] usb 1-7: Manufacturer: MSI EPF USB
[    1.845017] usb 1-7: SerialNumber: MSI EPF USB
[    1.847381] ata1.00: Enabling discard_zeroes_data
[    1.847487] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[    1.847489] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.847508] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.847525] sd 3:0:0:0: [sdb] Write Protect is off
[    1.847526] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.847533] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.847665] sd 0:0:0:0: [sda] Write Protect is off
[    1.847667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.847713] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.847825] ata1.00: Enabling discard_zeroes_data
[    1.848622]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.848915] ata1.00: Enabling discard_zeroes_data
[    1.849209] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.850052] usbcore: registered new interface driver usbhid
[    1.850052] usbhid: USB HID core driver
[    1.865711] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.865713] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.866100] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.966098] usb 1-8: new low-speed USB device number 3 using xhci_hcd
[    2.051897] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[    2.086103] random: fast init done
[    2.108989] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400/0x0, board id: 1474, fw id: 793787
[    2.109943] usb 1-8: New USB device found, idVendor=046d, idProduct=c06c
[    2.109946] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.109948] usb 1-8: Product: USB Optical Mouse
[    2.109950] usb 1-8: Manufacturer: Logitech
[    2.115707] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C06C.0002/input/input3
[    2.115956] hid-generic 0003:046D:C06C.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-8/input0
[    2.144551] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.230090] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    2.248644]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[    2.250632] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.270033] tsc: Refined TSC clocksource calibration: 2592.009 MHz
[    2.270047] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cbf51843, max_idle_ns: 440795283469 ns
[    2.371454] usb 1-10: New USB device found, idVendor=8087, idProduct=0a2a
[    2.371458] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.490083] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[    2.630331] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129
[    2.630334] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.630337] usb 1-12: Product: USB2.0-CRW
[    2.630339] usb 1-12: Manufacturer: Generic
[    2.630341] usb 1-12: SerialNumber: 20100201396000000
[    2.637519] usbcore: registered new interface driver rtsx_usb
[    3.170960] PM: Starting manual resume from disk
[    3.170965] PM: Hibernation image partition 8:3 present
[    3.170966] PM: Looking for hibernation image.
[    3.171512] PM: Image not found (code -22)
[    3.171515] PM: Hibernation image not present or could not be loaded.
[    3.278727] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.294210] clocksource: Switched to clocksource tsc
[    3.380047] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.390988] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.391398] systemd[1]: Detected architecture x86-64.
[    3.391698] systemd[1]: Set hostname to <PRT-MSIGP72>.
[    3.459296] systemd[1]: acpi-fakekey.socket: Cannot add dependency job, ignoring: Unit acpi-fakekey.socket is masked.
[    3.459299] systemd[1]: acpid.socket: Cannot add dependency job, ignoring: Unit acpid.socket is masked.
[    3.459305] systemd[1]: acpid.path: Cannot add dependency job, ignoring: Unit acpid.path is masked.
[    3.459366] systemd[1]: bumblebeed.service: Cannot add dependency job, ignoring: Unit bumblebeed.service is masked.
[    3.459727] systemd[1]: Listening on udev Control Socket.
[    3.459840] systemd[1]: Created slice System Slice.
[    3.459872] systemd[1]: Listening on Journal Socket.
[    3.474330] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    3.476451] lp: driver loaded but no devices found
[    3.477747] ppdev: user-space parallel port driver
[    3.489353] systemd-journald[267]: Received request to flush runtime journal from PID 1
[    3.548356] random: crng init done
[    3.551205] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:01/PNP0C0D:00/input/input4
[    3.551394] ACPI: Lid Switch [LID0]
[    3.551470] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    3.551473] ACPI: Sleep Button [SLPB]
[    3.551518] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    3.551520] ACPI: Power Button [PWRB]
[    3.551550] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    3.551551] ACPI: Power Button [PWRF]
[    3.575602] Bluetooth: Core ver 2.22
[    3.575611] NET: Registered protocol family 31
[    3.575612] Bluetooth: HCI device and connection manager initialized
[    3.575614] Bluetooth: HCI socket layer initialized
[    3.575615] Bluetooth: L2CAP socket layer initialized
[    3.575622] Bluetooth: SCO socket layer initialized
[    3.578948] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.582493] Bluetooth: HCI UART driver ver 2.3
[    3.582494] Bluetooth: HCI UART protocol H4 registered
[    3.582494] Bluetooth: HCI UART protocol BCSP registered
[    3.582494] Bluetooth: HCI UART protocol LL registered
[    3.582495] Bluetooth: HCI UART protocol ATH3K registered
[    3.582495] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.582513] Bluetooth: HCI UART protocol Intel registered
[    3.582522] Bluetooth: HCI UART protocol Broadcom registered
[    3.582522] Bluetooth: HCI UART protocol QCA registered
[    3.582523] Bluetooth: HCI UART protocol AG6XX registered
[    3.582523] Bluetooth: HCI UART protocol Marvell registered
[    3.584178] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.585374] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.585396] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    3.585415] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    3.586373] iTCO_vendor_support: vendor-support=0
[    3.587763] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.587877] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.587969] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.592493] [drm] Initialized
[    3.632476] Adding 7812092k swap on /dev/sda3.  Priority:-1 extents:1 across:7812092k SSFS
[    3.646315] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    3.653386] [drm] Memory usable by graphics device = 4096M
[    3.653387] [drm] Replacing VGA console driver
[    3.654372] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.654372] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.654373] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.654373] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.654373] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.654373] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.654376] Console: switching to colour dummy device 80x25
[    3.656139] Intel(R) Wireless WiFi driver for Linux
[    3.656139] Copyright(c) 2003- 2015 Intel Corporation
[    3.659478] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-26.ucode (-2)
[    3.659484] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[    3.659496] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-25.ucode (-2)
[    3.659499] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[    3.659507] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-24.ucode (-2)
[    3.659510] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[    3.659518] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-23.ucode (-2)
[    3.659521] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[    3.661635] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.661636] [drm] Driver supports precise vblank timestamp query.
[    3.664071] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-22.ucode
[    3.664360] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[    3.670097] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.672482] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[    3.672883] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[    3.675451] [drm] GuC firmware load skipped
[    3.678495] ACPI: Battery Slot [BAT1] (battery present)
[    3.679651] ACPI: AC Adapter [ADP1] (on-line)
[    3.681246] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.681525] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.681607] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    3.681640] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input10
[    3.681658] wmi: Mapper loaded
[    3.681688] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    3.690408] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.690712] fbcon: inteldrmfb (fb0) is primary device
[    3.704192] ahci 0000:00:17.0: port does not support device sleep
[    3.710650] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[    3.712685] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[    3.712845] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[    3.742240] MXM: GUID detected in BIOS
[    3.742281] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    3.742337] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    3.742387] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    3.742575] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    3.742578] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    3.742578] nouveau: detected PR support, will not use DSM
[    3.751430] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=3 (0x15/0x1b/0x1a/0x0/0x0) type:speaker
[    3.751431] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.751433] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    3.751433] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.751434] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    3.751435] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.751437] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    3.751438] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.767830] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.767877] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.767915] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.767954] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.767993] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.769809] intel_rapl: Found RAPL domain package
[    3.769810] intel_rapl: Found RAPL domain core
[    3.769811] intel_rapl: Found RAPL domain uncore
[    3.769812] intel_rapl: Found RAPL domain dram
[    3.773716] input: MSI WMI hotkeys as /devices/virtual/input/input16
[    3.789350] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.820670] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    4.462488] Adding 7811068k swap on /dev/sdb6.  Priority:-2 extents:1 across:7811068k FS
[    4.780109] Console: switching to colour frame buffer device 240x67
[    4.798359] [drm] RC6 on
[    4.804078] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.804394] nouveau 0000:01:00.0: NVIDIA GM107 (1171a0a2)
[    4.871733] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    4.876471] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    4.888010] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.958180] nouveau 0000:01:00.0: bios: version 82.07.88.00.06
[    5.062832] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[    5.062885] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1b40822c)
[    5.116676] vga_switcheroo: enabled
[    5.116946] [TTM] Zone  kernel: Available graphics memory: 4029972 kiB
[    5.116947] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    5.116947] [TTM] Initializing pool allocator
[    5.116950] [TTM] Initializing DMA pool allocator
[    5.116965] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    5.116965] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    5.116967] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    5.116986] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    5.116987] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    5.254252] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    5.254256] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    5.513122] usbcore: registered new interface driver btusb
[    5.523503] vboxdrv: loading out-of-tree module taints kernel.
[    5.523838] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    5.526620] Bluetooth: hci0: read Intel version: 370810011003110e00
[    5.527836] vboxdrv: Found 8 processor cores
[    5.528660] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    5.528663] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    5.546209] vboxdrv: TSC mode is Invariant, tentative frequency 2592009434 Hz
[    5.546211] vboxdrv: Successfully loaded version 5.1.14 (interface 0x00280000)
[    5.617055] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.617056] Bluetooth: BNEP filters: protocol multicast
[    5.617058] Bluetooth: BNEP socket layer initialized
[    5.746641] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    5.758253] VBoxNetFlt: Successfully started.
[    5.766133] VBoxNetAdp: Successfully started.
[    5.773461] VBoxPciLinuxInit
[    5.775416] vboxpci: IOMMU not found (not registered)
[    5.780780] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    5.781163] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    5.785539] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  299.033813] alx 0000:03:00.0 enp3s0: NIC Up: 100 Mbps Full
[  299.034019] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
Comment 13 Lv Zheng 2017-03-14 04:17:09 UTC
I'm not sure if the _REG problem is related to your functional issues.
In _OSI invocations, there is an EC operation region accessed:
            OperationRegion (EC, EmbeddedControl, Zero, 0x0100)
            Field (EC, ByteAcc, NoLock, Preserve)
            {
                ...
                Offset (0x34), 
                    ,   4, 
                OSVR,   4, 
                ...
            }
And it is invoked in _SB.PCI0.LPCB
    Scope (_SB.PCI0.LPCB)
    {
        Device (EC)
        {
            Name (MYEC, One)
            Method (_REG, 2, NotSerialized)  // _REG: Region Availability
            {
                If ((Arg0 == 0x03))
                {
                    MYEC = Arg1
                    If ((Arg1 == One))
                    {
                        If (_OSI ("Windows 2015"))
                        {
                            OSVR = 0x05
                        }
                        ElseIf (_OSI ("Windows 2013"))
                        {
                            OSVR = 0x05
                        }
                        ElseIf (_OSI ("Windows 2012"))
                        {
                            OSVR = 0x04
                        }
                        ElseIf (_OSI ("Windows 2009"))
                        {
                            OSVR = 0x03
                        }
                        ElseIf (_OSI ("Windows 2006"))
                        {
                            OSVR = 0x02
                        }
                        ElseIf (_OSI ("Windows 2001"))
                        {
                            OSVR = One
                        }
                        ElseIf (_OSI ("Windows 2001 SP1"))
                        {
                            OSVR = One
                        }
                        ElseIf (_OSI ("Windows 2001 SP2"))
                        {
                            OSVR = One
                        }
                        ElseIf (_OSI ("Windows 2001 SP3"))
                        {
                            OSVR = One
                        }
                    }
                }
                ...
            }
        }
    }
It looks like, the issue is in _REG, OSVR (EC region) cannot be accessed.
While AFAICR, this is quite an old issue and there should be no such a problem in upstream.
The code now is:
acpi_install_address_space_handler
  acpi_ev_install_space_handler
  acpi_ev_execute_reg_method
Could you download a latest upstream kernel, enable CONFIG_ACPI_DEBUG and rebuild the kernel.
Boot the kernel with "acpi.trace_state=enable log_buf_len=16M".
Try to save the whole boot log and upload it here.

Thanks
Lv
Comment 14 Remy LABENE 2017-03-22 16:51:18 UTC
Created attachment 255431 [details]
dmesg kernel build 4.10.5

see line 390 pci informations ?
Comment 15 Remy LABENE 2017-03-22 17:07:10 UTC
Created attachment 255433 [details]
another dmesg

Another possible instructive dmesg when the laptop is only battery.
Comment 16 Lv Zheng 2017-03-23 05:37:02 UTC
Are you willing to help us validate the _REG problem?

If you mean the bbswitch problem.
As far as I know, it is a bug in bbswitch code.

See this ACPICA error:
[    3.205159] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[    3.205267] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[    3.205394] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)

And in the spec:

9.1.1 _DSM (Device Specific Method)
This optional object is a control method that enables devices to provide device specific control functions that are consumed by the device driver.
Arguments: (4)
Arg0 – A Buffer containing a UUID
Arg1 – An Integer containing the Revision ID
Arg2 – An Integer containing the Function Index
Arg3 – A Package that contains function-specific arguments

I've seen the bbswitch source, the code invoking _DSM looks wrong.
It's not an upstream module, so why don't you ask a fix in bbswitch first?
Comment 17 Lv Zheng 2017-03-23 05:39:31 UTC
*** Bug 194889 has been marked as a duplicate of this bug. ***
Comment 18 Remy LABENE 2017-03-23 07:33:13 UTC
You're right, it's probably a bbswitch bug. The system crashes when I run a 3D application
Comment 19 Zhang Rui 2017-03-29 02:15:16 UTC
Lv,
https://bugzilla.kernel.org/show_bug.cgi?id=156341
is this one also a duplicate?
Comment 20 Remy LABENE 2017-03-29 09:32:03 UTC
It will appear that yes, when I boot with grub option acpi_osi=! acpi_osi="Windows 2009" the system don't freeze on battery.
Comment 21 Remy LABENE 2017-03-29 09:34:03 UTC
Created attachment 255625 [details]
dmesg with grub options acpi_osi=! acpi_osi="Windows 2009"
Comment 22 Lv Zheng 2017-03-30 02:58:41 UTC
Does acpi_rev_override=5 work for you.

I could remember a fixed issue reported by Peter Wu
https://github.com/Bumblebee-Project/bbswitch/issues/142

Let me check with him if the 2 bugs are bugs caused by the same reason.

Thanks
Lv
Comment 23 Remy LABENE 2017-04-04 19:55:05 UTC
"Does acpi_rev_override=5 work for you."

No, the system freeze when I boot with the battery only.
Comment 24 Lv Zheng 2017-07-04 01:32:16 UTC
Since you are still concerned, let me re-open.
Comment 25 Lv Zheng 2017-07-04 05:56:04 UTC
Reset to Drivers/Pci as ACPI problems are not related to the main issue.
Comment 26 Remy LABENE 2017-10-27 19:08:48 UTC
The new debian 9.1 kernel adds the "irqbalance" package. The system seems more stable.
Comment 27 Remy LABENE 2017-10-27 19:13:16 UTC
Created attachment 260419 [details]
dmesg with the new daemon irqbalance

The new debian 9.1 kernel adds the "irqbalance" package. The system seems more stable. See my last dmesg.