Bug 16112
| Summary: | sis190 driver 'hangs' randomly on data spikes; NETDEV WATCHER dump in dmesg | ||
|---|---|---|---|
| Product: | Drivers | Reporter: | Pawel Jasnos (pawel.jasnos) |
| Component: | Network | Assignee: | Francois Romieu (romieu) |
| Status: | NEW --- | ||
| Severity: | normal | CC: | akpm, alan, arutemus, brandon, szg00000 |
| Priority: | P1 | ||
| Hardware: | i386 | ||
| OS: | Linux | ||
| Kernel Version: | 3.5.4 | Subsystem: | |
| Regression: | No | Bisected commit-id: | |
| Attachments: |
Dmesg after a 'hang'
dmesg info(part with info of card loading and crashing) lspci info of my sis191 card |
||
I have the same problem on the same card sis191. Easy way to reprosuce this problem to do something like this: "iperf -c $IP -i 5 -t 100000 -d -P 2" 5-10 sec and network is hangs. After i just need to make reup interface(ifconfig down && ifconfig up) even without reloading driver. Any advices to solve this problem? Created attachment 81741 [details]
dmesg info(part with info of card loading and crashing)
adding dmesg info and also forgot to say, my curret kernel is
Linux art 3.5.4-3-ARCH #1 SMP PREEMPT x86_64 GNU/Linux
Created attachment 81751 [details]
lspci info of my sis191 card
also adding lspci info
|
Created attachment 26629 [details] Dmesg after a 'hang' the driver seems to 'freeze' by not transmitting any further packets - pings or any connection attempts fail, wireshark is not able to capture any passing packets. Bringing the interface down and then up doesn't work, but reloading the driver (modprobe -r sis190; modprobe sis190 ) resolves the problem. Steps to Reproduce: 1.Use a network card serviced by the driver 2.Download a lot of data in short period of time (few Gigabytes) Actual Results: Driver stops servicing any further packets. Expected Results: Driver works as normal. Card details: lspci -vvv (edited): 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) Subsystem: Elitegroup Computer Systems Device 5a00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at d4307000 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at 1000 [size=128] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sis190 dmesg |grep sis190: (fresh boot) [ 8.183248] sis190 Gigabit Ethernet driver 1.3 loaded. [ 8.183395] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8.183506] sis190 0000:00:04.0: setting latency timer to 64 Dmesg after a 'hang' is attached - I removed some MAC addresses/serial numbers for privacy.