Bug 14551
| Summary: | FM Radio tuner of WinTV PCI (Conexant CX23881-19 chip) doesn't work | ||
|---|---|---|---|
| Product: | v4l-dvb | Reporter: | Jens Kager (jens.kager) |
| Component: | radio | Assignee: | radio (v4l-dvb_radio) |
| Status: | CLOSED OBSOLETE | ||
| Severity: | normal | CC: | akpm, alan, mchehab |
| Priority: | P1 | ||
| Hardware: | All | ||
| OS: | Linux | ||
| Kernel Version: | 2.6.31-14 Ubuntu | Subsystem: | |
| Regression: | No | Bisected commit-id: | |
Reassigned to v4l-dvb Probably, the tuner were miss-detected or the tuner entry has a wrong switch for the FM frequency range. In the case of Hauppauge devices, the tuner is selected based on the info stored at the device eeprom. Please put: options tveeprom debug=1 on your /etc/modprobe.conf (or equivalent file) and reboot. After reboot, get the entire output of dmesg and post here. OK, this is my dmesg output with tveeprom debug=1: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d40ac (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable) [ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f7f8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f7f8000 - 000000003f800000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3f7f0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03F800000 mask FFF800000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000cc000 - 00000000000d40ac (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f7f0000 (usable) [ 0.000000] modified: 000000003f7f0000 - 000000003f7f8000 (ACPI data) [ 0.000000] modified: 000000003f7f8000 - 000000003f800000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f26e000 - 2fa33427 [ 0.000000] ACPI: RSDP 000fa280 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 3f7f0000 0002C (v01 AMIINT INTEL845 00000010 MSFT 00000097) [ 0.000000] ACPI: FACP 3f7f0030 00081 (v01 AMIINT INTEL845 00000011 MSFT 00000097) [ 0.000000] ACPI: DSDT 3f7f0120 038B6 (v01 INTEL P4I45GL 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 3f7f8000 00040 [ 0.000000] ACPI: APIC 3f7f00c0 0005C (v01 AMIINT INTEL845 00000009 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [002f26e000 - 002fa33427] RAMDISK ==> [002f26e000 - 002fa33427] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac0ad] BRK ==> [00008a9000 - 00008ac0ad] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00fbb10] fbb10 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f7f0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f7f0 [ 0.000000] On node 0 totalpages: 259967 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 256 pages used for memmap [ 0.000000] HighMem zone: 32498 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf400000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c17f4000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257935 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-14-generic root=/dev/mapper/kabinett-root ro nomodeset [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5201280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7f0) [ 0.000000] Memory: 1009448k/1040320k available (4565k kernel code, 29968k reserved, 2143k data, 540k init, 131016k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2421.460 MHz processor. [ 0.001306] Console: colour VGA+ 80x25 [ 0.001314] console [tty0] enabled [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4842.92 BogoMIPS (lpj=9685840) [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004000] CPU: L2 cache: 128K [ 0.004000] CPU: Hyper-Threading is disabled [ 0.004000] mce: CPU supports 4 MCE banks [ 0.004000] CPU0: Thermal monitoring enabled (TM1) [ 0.004000] Performance Counters: no PMU driver, software counters only. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.017100] SMP alternatives: switching to UP code [ 0.028027] ACPI: Core revision 20090521 [ 0.040478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082170] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (4842.92 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] Booting paravirtualized kernel on bare hardware [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 16:12:03 Date: 11/12/09 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.095624] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3 [ 0.095684] PCI: Using configuration type 1 for base access [ 0.098246] bio: create slab <bio-0> at 0 [ 0.099325] ACPI: EC: Look up EC in DSDT [ 0.106795] ACPI: Interpreter enabled [ 0.106859] ACPI: (supports S0 S1 S4 S5) [ 0.107080] ACPI: Using IOAPIC for interrupt routing [ 0.115628] ACPI: Power Resource [URP1] (off) [ 0.116093] ACPI: Power Resource [URP2] (off) [ 0.116222] ACPI: Power Resource [FDDP] (off) [ 0.116350] ACPI: Power Resource [LPTP] (off) [ 0.116680] ACPI: No dock devices found. [ 0.117014] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.117171] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.117268] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.117279] pci 0000:00:02.0: reg 14 32bit mmio: [0xdff80000-0xdfffffff] [ 0.117408] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f] [ 0.117477] pci 0000:00:1d.1: reg 20 io port: [0xe800-0xe81f] [ 0.117544] pci 0000:00:1d.2: reg 20 io port: [0xec00-0xec1f] [ 0.117620] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff7bc00-0xdff7bfff] [ 0.117688] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.117747] pci 0000:00:1d.7: PME# disabled [ 0.117855] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.117857] * this clock source is slow. If you are sure your timer does not have [ 0.117859] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.118072] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.118135] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO [ 0.118218] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.118229] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.118238] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.118248] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.118258] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.118268] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.118325] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff] [ 0.118335] pci 0000:00:1f.5: reg 14 io port: [0xdc00-0xdc3f] [ 0.118344] pci 0000:00:1f.5: reg 18 32bit mmio: [0xdff7ba00-0xdff7bbff] [ 0.118354] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xdff7b900-0xdff7b9ff] [ 0.118391] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.118446] pci 0000:00:1f.5: PME# disabled [ 0.118560] pci 0000:03:06.0: reg 10 32bit mmio: [0xdd000000-0xddffffff] [ 0.118654] pci 0000:03:06.1: reg 10 32bit mmio: [0xde000000-0xdeffffff] [ 0.118755] pci 0000:03:0a.0: reg 10 io port: [0xcc00-0xccff] [ 0.118765] pci 0000:03:0a.0: reg 14 32bit mmio: [0xdfdfff00-0xdfdfffff] [ 0.118812] pci 0000:03:0a.0: supports D1 D2 [ 0.118817] pci 0000:03:0a.0: PME# supported from D1 D2 D3hot D3cold [ 0.118872] pci 0000:03:0a.0: PME# disabled [ 0.118954] pci 0000:00:1e.0: transparent bridge [ 0.119007] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.119014] pci 0000:00:1e.0: bridge 32bit mmio: [0xdbd00000-0xdfdfffff] [ 0.119031] pci_bus 0000:00: on NUMA node 0 [ 0.119043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.119243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT] [ 0.139050] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.139682] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.140340] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.141035] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.141672] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.142384] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.143083] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.143848] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.144737] SCSI subsystem initialized [ 0.144972] libata version 3.00 loaded. [ 0.145215] usbcore: registered new interface driver usbfs [ 0.145317] usbcore: registered new interface driver hub [ 0.145477] usbcore: registered new device driver usb [ 0.145963] ACPI: WMI: Mapper loaded [ 0.146019] PCI: Using ACPI for IRQ routing [ 0.146423] Bluetooth: Core ver 2.15 [ 0.146623] NET: Registered protocol family 31 [ 0.146676] Bluetooth: HCI device and connection manager initialized [ 0.146730] Bluetooth: HCI socket layer initialized [ 0.146780] NetLabel: Initializing [ 0.146827] NetLabel: domain hash size = 128 [ 0.146874] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.146949] NetLabel: unlabeled traffic allowed by default [ 0.150020] pnp: PnP ACPI init [ 0.150112] ACPI: bus type pnp registered [ 0.156254] pnp: PnP ACPI: found 12 devices [ 0.156311] ACPI: ACPI bus type pnp unregistered [ 0.156363] PnPBIOS: Disabled by ACPI PNP [ 0.156441] system 00:01: ioport range 0x290-0x297 has been reserved [ 0.156497] system 00:01: ioport range 0x3f0-0x3f1 has been reserved [ 0.156551] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.156604] system 00:01: ioport range 0x400-0x43f has been reserved [ 0.156658] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.156711] system 00:01: ioport range 0xc00-0xc1f has been reserved [ 0.156768] system 00:01: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.156823] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.156878] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.191857] AppArmor: AppArmor Filesystem Enabled [ 0.191963] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.192046] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.192102] pci 0000:00:1e.0: MEM window: 0xdbd00000-0xdfdfffff [ 0.192156] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.192223] pci 0000:00:1e.0: setting latency timer to 64 [ 0.192233] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.192238] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.192243] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.192248] pci_bus 0000:03: resource 1 mem: [0xdbd00000-0xdfdfffff] [ 0.192253] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.192258] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.192325] NET: Registered protocol family 2 [ 0.192533] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.193186] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.194935] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.195889] TCP: Hash tables configured (established 131072 bind 65536) [ 0.195956] TCP reno registered [ 0.196264] NET: Registered protocol family 1 [ 0.196431] Trying to unpack rootfs image as initramfs... [ 0.556697] Freeing initrd memory: 7957k freed [ 0.573154] cpufreq-nforce2: No nForce2 chipset. [ 0.573277] Scanning for low memory corruption every 60 seconds [ 0.573576] audit: initializing netlink socket (disabled) [ 0.573658] type=2000 audit(1258042322.572:1): initialized [ 0.583340] highmem bounce pool size: 64 pages [ 0.583407] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.586022] VFS: Disk quotas dquot_6.5.2 [ 0.586209] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.587567] fuse init (API version 7.12) [ 0.587864] msgmni has been set to 1732 [ 0.588586] alg: No test for stdrng (krng) [ 0.588695] io scheduler noop registered [ 0.588747] io scheduler anticipatory registered [ 0.588797] io scheduler deadline registered [ 0.588971] io scheduler cfq registered (default) [ 0.589050] pci 0000:00:02.0: Boot video device [ 0.589312] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.589422] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.589723] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.589792] ACPI: Power Button [PWRF] [ 0.589936] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.590004] ACPI: Power Button [PWRB] [ 0.590510] processor LNXCPU:00: registered as cooling_device0 [ 0.590571] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.593909] isapnp: Scanning for PnP cards... [ 0.692099] Switched to high resolution mode on CPU 0 [ 0.948291] isapnp: No Plug & Play device found [ 0.951423] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.951650] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.951843] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.952452] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.954731] brd: module loaded [ 0.955868] loop: module loaded [ 0.956196] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.956493] ata_piix 0000:00:1f.1: version 2.13 [ 0.956523] alloc irq_desc for 18 on node -1 [ 0.956528] alloc kstat_irqs on node -1 [ 0.956540] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.956675] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.956875] scsi0 : ata_piix [ 0.957201] scsi1 : ata_piix [ 0.959979] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.960079] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.962559] Fixed MDIO Bus: probed [ 0.962712] PPP generic driver version 2.4.2 [ 0.963035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.963159] alloc irq_desc for 23 on node -1 [ 0.963165] alloc kstat_irqs on node -1 [ 0.963177] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.963258] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.963264] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.963455] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.967460] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.967521] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.967553] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff7bc00 [ 0.980030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.980274] usb usb1: configuration #1 chosen from 1 choice [ 0.980401] hub 1-0:1.0: USB hub found [ 0.980473] hub 1-0:1.0: 6 ports detected [ 0.980684] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.980795] uhci_hcd: USB Universal Host Controller Interface driver [ 0.980950] alloc irq_desc for 16 on node -1 [ 0.980956] alloc kstat_irqs on node -1 [ 0.980970] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.981039] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.981046] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.981222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.981340] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400 [ 0.981576] usb usb2: configuration #1 chosen from 1 choice [ 0.981710] hub 2-0:1.0: USB hub found [ 0.981783] hub 2-0:1.0: 2 ports detected [ 0.981951] alloc irq_desc for 19 on node -1 [ 0.981956] alloc kstat_irqs on node -1 [ 0.981968] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.982037] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.982044] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.982205] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.982329] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 0.982569] usb usb3: configuration #1 chosen from 1 choice [ 0.982718] hub 3-0:1.0: USB hub found [ 0.982789] hub 3-0:1.0: 2 ports detected [ 0.982967] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.983043] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.983049] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.983231] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.983350] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 0.983608] usb usb4: configuration #1 chosen from 1 choice [ 0.983738] hub 4-0:1.0: USB hub found [ 0.983810] hub 4-0:1.0: 2 ports detected [ 0.984143] PNP: No PS/2 controller found. Probing ports directly. [ 0.986750] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.986818] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.987059] mice: PS/2 mouse device common for all mice [ 0.987345] rtc_cmos 00:03: RTC can wake from S4 [ 0.987504] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.987594] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.987899] device-mapper: uevent: version 1.0.3 [ 0.988268] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.988637] device-mapper: multipath: version 1.1.0 loaded [ 0.988696] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.989130] EISA: Probing bus 0 at eisa.0 [ 0.989224] EISA: Detected 0 cards. [ 0.989458] cpuidle: using governor ladder [ 0.989513] cpuidle: using governor menu [ 0.990397] TCP cubic registered [ 0.990772] NET: Registered protocol family 10 [ 0.991620] lo: Disabled Privacy Extensions [ 0.992158] NET: Registered protocol family 17 [ 0.992274] Bluetooth: L2CAP ver 2.13 [ 0.992324] Bluetooth: L2CAP socket layer initialized [ 0.992375] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.992424] Bluetooth: SCO socket layer initialized [ 0.992584] Bluetooth: RFCOMM TTY layer initialized [ 0.992642] Bluetooth: RFCOMM socket layer initialized [ 0.992691] Bluetooth: RFCOMM ver 1.11 [ 0.993644] Using IPI No-Shortcut mode [ 0.993885] PM: Resume from disk failed. [ 0.993916] registered taskstats version 1 [ 0.994142] Magic number: 1:796:236 [ 0.994313] rtc_cmos 00:03: setting system clock to 2009-11-12 16:12:04 UTC (1258042324) [ 0.994381] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.994432] EDD information not available. [ 1.132444] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-08, max UDMA/100 [ 1.132504] ata1.00: 78242976 sectors, multi 16: LBA48 [ 1.132818] ata1.01: ATA-7: Hitachi HDS721616PLAT80, P22OA8BA, max UDMA/133 [ 1.132876] ata1.01: 312581808 sectors, multi 16: LBA48 [ 1.140339] ata1.00: configured for UDMA/100 [ 1.156433] ata1.01: configured for UDMA/100 [ 1.156737] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5 [ 1.157101] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.157419] scsi 0:0:1:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 1.157759] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.157971] sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 1.158249] sd 0:0:0:0: [sda] Write Protect is off [ 1.158304] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.158413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.158989] sda: sda1 sda2 < sda5 > [ 1.197807] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.197892] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.198153] sd 0:0:1:0: [sdb] Write Protect is off [ 1.198209] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.198311] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.198891] sdb: sdb1 [ 1.213067] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.292036] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1.292832] ata2.00: ATAPI: JLMS XJ-HD166S, DS1A, max UDMA/33 [ 1.292933] ata2.01: ATAPI: LITE-ON LTR-52327S, QS0B, max UDMA/33 [ 1.293495] ata2.00: configured for UDMA/33 [ 1.308222] ata2.01: configured for UDMA/33 [ 1.309361] scsi 1:0:0:0: CD-ROM JLMS XJ-HD166S DS1A PQ: 0 ANSI: 5 [ 1.311445] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.311507] Uniform CD-ROM driver Revision: 3.20 [ 1.311755] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.311890] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.312992] scsi 1:0:1:0: CD-ROM LITE-ON LTR-52327S QS0B PQ: 0 ANSI: 5 [ 1.316771] sr1: scsi3-mmc drive: 150x/52x writer cd/rw xa/form2 cdda tray [ 1.317029] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.317183] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.317300] Freeing unused kernel memory: 540k freed [ 1.318413] Write protecting the kernel text: 4568k [ 1.318508] Write protecting the kernel read-only data: 1836k [ 1.478910] usb 1-2: configuration #1 chosen from 1 choice [ 1.481681] hub 1-2:1.0: USB hub found [ 1.484461] hub 1-2:1.0: 4 ports detected [ 1.680496] Floppy drive(s): fd0 is 1.44M [ 1.728976] FDC 0 is a post-1991 82077 [ 1.779366] Linux agpgart interface v0.103 [ 1.785122] agpgart-intel 0000:00:00.0: Intel 830M Chipset [ 1.785368] agpgart-intel 0000:00:00.0: detected 8060K stolen memory [ 1.787772] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 1.893638] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 2.077935] [drm] Initialized drm 1.1.0 20060810 [ 2.089989] usb 3-2: configuration #1 chosen from 1 choice [ 2.113750] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.113818] pci 0000:00:02.0: setting latency timer to 64 [ 2.125851] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.126135] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.126241] 8139cp 0000:03:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.131027] 8139too Fast Ethernet driver 0.9.28 [ 2.131159] alloc irq_desc for 17 on node -1 [ 2.131164] alloc kstat_irqs on node -1 [ 2.131178] 8139too 0000:03:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.141420] eth0: RealTek RTL8139 at 0xcc00, 00:0b:6a:20:24:6d, IRQ 17 [ 2.142298] usbcore: registered new interface driver hiddev [ 2.158388] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3 [ 2.158696] generic-usb 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-2/input0 [ 2.158809] usbcore: registered new interface driver usbhid [ 2.158877] usbhid: v2.6:USB HID core driver [ 2.172400] usb 1-2.3: new high speed USB device using ehci_hcd and address 4 [ 2.294455] usb 1-2.3: configuration #1 chosen from 1 choice [ 2.313073] Initializing USB Mass Storage driver... [ 2.313419] scsi2 : SCSI emulation for USB Mass Storage devices [ 2.313746] usbcore: registered new interface driver usb-storage [ 2.313809] USB Mass Storage support registered. [ 2.315782] usb-storage: device found at 4 [ 2.315788] usb-storage: waiting for device to settle before scanning [ 2.396107] usb 1-2.4: new high speed USB device using ehci_hcd and address 5 [ 2.501672] usb 1-2.4: configuration #1 chosen from 1 choice [ 2.505103] hub 1-2.4:1.0: USB hub found [ 2.506442] hub 1-2.4:1.0: 4 ports detected [ 2.784396] usb 1-2.4.2: new low speed USB device using ehci_hcd and address 6 [ 2.922243] usb 1-2.4.2: configuration #1 chosen from 1 choice [ 2.942381] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.0/input/input4 [ 2.942730] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.7-2.4.2/input0 [ 2.972253] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.1/input/input5 [ 2.972585] generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.7-2.4.2/input1 [ 3.381332] PM: Starting manual resume from disk [ 3.381395] PM: Resume from partition 252:1 [ 3.381398] PM: Checking hibernation image. [ 3.381712] PM: Resume from disk failed. [ 3.414475] EXT4-fs (dm-0): barriers enabled [ 3.434261] kjournald2 starting: pid 365, dev dm-0:8, commit interval 5 seconds [ 3.434369] EXT4-fs (dm-0): delayed allocation enabled [ 3.434487] EXT4-fs: file extents enabled [ 3.435768] EXT4-fs: mballoc enabled [ 3.435861] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 4.289046] type=1505 audit(1258042327.793:2): operation="profile_load" pid=391 name=/usr/share/gdm/guest-session/Xsession [ 4.328412] type=1505 audit(1258042327.833:3): operation="profile_load" pid=392 name=/sbin/dhclient3 [ 4.329265] type=1505 audit(1258042327.833:4): operation="profile_load" pid=392 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.329770] type=1505 audit(1258042327.833:5): operation="profile_load" pid=392 name=/usr/lib/connman/scripts/dhclient-script [ 4.358502] type=1505 audit(1258042327.861:6): operation="profile_load" pid=393 name=/usr/bin/evince [ 4.370336] type=1505 audit(1258042327.873:7): operation="profile_load" pid=393 name=/usr/bin/evince-previewer [ 4.377649] type=1505 audit(1258042327.881:8): operation="profile_load" pid=393 name=/usr/bin/evince-thumbnailer [ 4.434701] type=1505 audit(1258042327.937:9): operation="profile_load" pid=395 name=/usr/lib/cups/backend/cups-pdf [ 4.435715] type=1505 audit(1258042327.937:10): operation="profile_load" pid=395 name=/usr/sbin/cupsd [ 6.229743] Adding 1642488k swap on /dev/mapper/kabinett-swap_1. Priority:-1 extents:1 across:1642488k [ 6.564571] EXT4-fs (dm-0): internal journal on dm-0:8 [ 7.048723] udev: starting version 147 [ 7.320499] usb-storage: device scan complete [ 7.324173] scsi 2:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [ 7.325523] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 7.344500] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 7.456460] EXT4-fs (sdb1): barriers enabled [ 7.492090] kjournald2 starting: pid 520, dev sdb1:8, commit interval 5 seconds [ 7.493260] EXT4-fs (sdb1): internal journal on sdb1:8 [ 7.493270] EXT4-fs (sdb1): delayed allocation enabled [ 7.493276] EXT4-fs: file extents enabled [ 7.808877] EXT4-fs: mballoc enabled [ 7.808919] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 8.984925] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.165266] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.654480] parport_pc 00:09: reported by Plug and Play ACPI [ 9.654592] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 9.730126] lp: driver loaded but no devices found [ 9.744310] lp0: using parport0 (interrupt-driven). [ 9.779245] ppdev: user-space parallel port driver [ 10.048781] intel_rng: FWH not detected [ 10.068492] gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x200, speed 840kHz [ 10.767687] Linux video capture interface: v2.00 [ 12.005271] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded [ 12.005351] cx8800 0000:03:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 12.005853] cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected], frontend(s): 0 [ 12.005859] cx88[0]: TV tuner type -1, Radio tuner type -1 [ 12.011252] cx2388x alsa driver version 0.0.7 loaded [ 12.347688] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 12.347765] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 12.632392] tuner 0-0043: chip found @ 0x86 (cx88[0]) [ 12.676071] intel8x0_measure_ac97_clock: measured 59156 usecs (2849 samples) [ 12.676078] intel8x0: clocking to 48000 [ 12.686545] tda9887 0-0043: creating new instance [ 12.686552] tda9887 0-0043: tda988[5/6/7] found [ 12.695719] tuner 0-0061: chip found @ 0xc2 (cx88[0]) [ 12.734732] tveeprom 0-0050: full 256-byte eeprom dump: [ 12.734737] tveeprom 0-0050: 00: 03 00 00 00 70 00 01 34 84 12 00 00 05 50 15 7f [ 12.734762] tveeprom 0-0050: 10: 74 59 23 d7 86 19 16 a9 ff 00 00 00 05 84 0a 00 [ 12.734786] tveeprom 0-0050: 20: 01 01 20 77 00 40 55 23 78 00 74 02 01 1f 02 79 [ 12.734811] tveeprom 0-0050: 30: f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.734834] tveeprom 0-0050: 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.734858] tveeprom 0-0050: 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.734882] tveeprom 0-0050: 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.734905] tveeprom 0-0050: 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.734929] tveeprom 0-0050: 80: 00 00 00 00 84 12 00 00 05 50 15 7f 74 59 23 d7 [ 12.734953] tveeprom 0-0050: 90: 86 19 16 a9 ff 00 00 00 05 84 0a 00 01 01 20 77 [ 12.734978] tveeprom 0-0050: a0: 00 40 55 23 78 00 74 02 01 1f 02 79 f0 00 00 00 [ 12.735002] tveeprom 0-0050: b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.735026] tveeprom 0-0050: c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.735049] tveeprom 0-0050: d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.735073] tveeprom 0-0050: e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.735097] tveeprom 0-0050: f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.735122] tveeprom 0-0050: Tag [00] + 17 bytes: 05 50 15 7f 74 59 23 d7 86 19 16 a9 ff 00 00 00 05 [ 12.735149] tveeprom 0-0050: Tag [01] + 9 bytes: 01 20 77 00 40 55 23 78 00 [ 12.735166] tveeprom 0-0050: Tag [02] + 3 bytes: 01 1f 02 [ 12.735176] tveeprom 0-0050: Hauppauge model 34519, rev J189, serial# 7873365 [ 12.735181] tveeprom 0-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) [ 12.735187] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 12.735192] tveeprom 0-0050: audio processor is CX881 (idx 31) [ 12.735196] tveeprom 0-0050: has radio [ 12.735200] cx88[0]: hauppauge eeprom: model=34519 [ 12.853957] tuner-simple 0-0061: creating new instance [ 12.853966] tuner-simple 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 12.857387] input: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:1e.0/0000:03:06.0/input/input6 [ 12.857511] cx88[0]/0: found at 0000:03:06.0, rev: 5, irq: 19, latency: 32, mmio: 0xdd000000 [ 12.857538] IRQ 19/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 12.857668] cx88[0]/0: registered device video0 [v4l2] [ 12.857755] cx88[0]/0: registered device vbi0 [ 12.857865] cx88[0]/0: registered device radio0 [ 12.867463] cx88_audio 0000:03:06.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 12.867482] IRQ 19/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 12.867528] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 13.860196] __ratelimit: 12 callbacks suppressed [ 13.860204] type=1505 audit(1258042337.365:15): operation="profile_replace" pid=883 name=/usr/share/gdm/guest-session/Xsession [ 13.864807] type=1505 audit(1258042337.369:16): operation="profile_replace" pid=884 name=/sbin/dhclient3 [ 13.865582] type=1505 audit(1258042337.369:17): operation="profile_replace" pid=884 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 13.866049] type=1505 audit(1258042337.369:18): operation="profile_replace" pid=884 name=/usr/lib/connman/scripts/dhclient-script [ 13.879875] type=1505 audit(1258042337.381:19): operation="profile_replace" pid=885 name=/usr/bin/evince [ 13.892523] type=1505 audit(1258042337.397:20): operation="profile_replace" pid=885 name=/usr/bin/evince-previewer [ 13.899981] type=1505 audit(1258042337.401:21): operation="profile_replace" pid=885 name=/usr/bin/evince-thumbnailer [ 13.915340] type=1505 audit(1258042337.417:22): operation="profile_replace" pid=887 name=/usr/lib/cups/backend/cups-pdf [ 13.916366] type=1505 audit(1258042337.421:23): operation="profile_replace" pid=887 name=/usr/sbin/cupsd [ 13.922711] type=1505 audit(1258042337.425:24): operation="profile_replace" pid=888 name=/usr/sbin/mysqld [ 19.372532] __ratelimit: 15 callbacks suppressed [ 19.372540] type=1503 audit(1258042342.877:30): operation="open" pid=1306 parent=1194 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 20.081179] type=1503 audit(1258042343.585:31): operation="open" pid=1354 parent=1353 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 20.765873] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 21.143038] type=1503 audit(1258042344.645:32): operation="open" pid=1399 parent=1398 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 22.208733] type=1503 audit(1258042345.713:33): operation="open" pid=1416 parent=1415 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 23.328692] type=1503 audit(1258042346.833:34): operation="open" pid=1463 parent=1462 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 23.545353] type=1503 audit(1258042347.049:35): operation="open" pid=1479 parent=1478 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 31.656063] eth0: no IPv6 routers present Closing as obsolete, if this is still seen with a modern kernel please re-open |
The card (WinTV PCI, model 34519 Rev J189, using the Conexant CX23881-19 decoder chip) supports analog TV and FM radio, both of which I confirmed to be working in a Windows XP machine. TV also works on linux (Ubuntu 9.10, kernel version 2.6.31-14-generic), but the FM radio tuner doesn't work properly. The device file /dev/radio0 is there, but every radio application I tried produces only a hissing noise on every frequency and doesn't find any channels. When I start "radio -c /dev/radio0" (from the "radio" package), the tuner frequency shown initially is "2147.", whatever this is supposed to mean. In this setting, it is noticable that there is some radio signal there - it is very faint and unintelligible, but you can tell that there are people speaking. As soon as I try to change the frequency though, a hissing noise appears which sounds exactly the same on each and every frequency. Also, on no frequency I can set up there is anything resembling the unintelligible speech heard in the tool's initial setting. I suspect that the code to change the tuner frequency doesn't work correctly for this card: When I load the module cx88xx with option "radio=51", "radio=60" or "radio=78", I still hear the hissing noise in the initial setting of the radio app (with frequency display on "2147."), but when I change the frequency I get a working radio signal - rather clear and ok sounding - just that it's the same signal no matter which frequency I choose! When unloading the module and loading with another radio option (or none), the previous behavior reappears (only noise on all frequencies). The card's lspci output: 03:06.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. Device 3401 Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel driver in use: cx8800 Kernel modules: cx8800 03:06.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Hauppauge computer works Inc. Device 3401 Flags: medium devsel, IRQ 19 Memory at de000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Kernel modules: cx88-alsa