Bug 14188

Summary: conflicts with ACPI region
Product: ACPI Reporter: Stoner.Di (jekigure6)
Component: Config-OtherAssignee: acpi_config-other
Status: CLOSED DUPLICATE    
Severity: normal CC: lenb, rui.zhang
Priority: P1    
Hardware: All   
OS: Linux   
Kernel Version: 2.6.31 Subsystem:
Regression: No Bisected commit-id:
Attachments: kernel config with bug ACPI

Description Stoner.Di 2009-09-17 19:32:26 UTC 
After compiling the latest 2.6.31 to these messages appeared when loading the kernel! So far I have always done so. Problems arise for the first pat.Mislya that this is incorrect allocation of ram memory.

My hardware:
motherboard: msi dka790gx platynum
procesor: amd phenom 9950
ram 2x2gb  Kingmax KLEE88F-B8KO600000

report for bug in dmesg:

f71882fg: Found f71882fg chip at 0x600, revision 32
ACPI: I/O resource f71882fg [0x600-0x607] conflicts with ACPI region HMOR [0x605-0x606]
ACPI: Device needs an ACPI driver



this is full dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.31dobix7 (root@stoner-desktop) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #1 SMP Wed Sep 16 20:58:17 EEST 2009 ()
[    0.000000] Command line: root=UUID=b2b5a7c8-4f10-425c-abc5-afb9c1c4d800 ro quiet vga=0x0323  crashkernel=384M-2G:64M@16M,2G-:128M@16M
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[    0.000000]  BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cff90000 page 4k
[    0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000
[    0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ 12000-14000
[    0.000000] RAMDISK: 378fc000 - 37fef7ac
[    0.000000] ACPI: RSDP 00000000000fa3e0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cff90000 0003C (v01 7550MS A7550100 20090701 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cff90200 00084 (v01 7550MS A7550100 20090701 MSFT 00000097)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558
[    0.000000] ACPI: DSDT 00000000cff90450 098FE (v01  A7550 A7550100 00000100 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cff9e000 00040
[    0.000000] ACPI: APIC 00000000cff90390 0007C (v01 7550MS A7550100 20090701 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 7550MS OEMMCFG  20090701 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cff9e040 00072 (v01 7550MS A7550100 20090701 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cff99d50 00038 (v01 7550MS OEMHPET  20090701 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cff99d90 00544 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000120000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[    0.000000]   NODE_DATA [0000000000013000 - 0000000000046fff]
[    0.000000]   bootmap [0000000000047000 -  000000000006afff] pages 24
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 000189b008]    TEXT DATA BSS ==> [0001000000 - 000189b008]
[    0.000000]   #3 [00378fc000 - 0037fef7ac]          RAMDISK ==> [00378fc000 - 0037fef7ac]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [000189c000 - 000189c16f]              BRK ==> [000189c000 - 000189c16f]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cff90
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000] On node 0 totalpages: 982815
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 102 pages reserved
[    0.000000]   DMA zone: 3825 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833480 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 129280 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000)
[    0.000000] NR_CPUS:4096 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages at ffff88002801f000, static data 88416 bytes
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 966585
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=UUID=b2b5a7c8-4f10-425c-abc5-afb9c1c4d800 ro quiet vga=0x0323  crashkernel=384M-2G:64M@16M,2G-:128M@16M
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 20000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[    0.000000] Memory: 3793380k/4718592k available (3494k kernel code, 787332k absent, 137880k reserved, 2571k data, 1248k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:33024 nr_irqs:456
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2600.312 MHz processor.
[    0.000017] Console: colour dummy device 80x25
[    0.000019] console [tty0] enabled
[    0.000999] allocated 39321600 bytes of page_cgroup
[    0.000999] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000999] hpet clockevent registered
[    0.000999]   alloc irq_desc for 24 on node 0
[    0.000999]   alloc kstat_irqs on node 0
[    0.000999] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[    0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.61 BogoMIPS (lpj=2600309)
[    0.001037] Security Framework initialized
[    0.001043] SELinux:  Disabled at boot.
[    0.001045] AppArmor: AppArmor disabled by boot time parameter
[    0.001046] 
[    0.001347] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003035] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003701] Mount-cache hash table entries: 256
[    0.003825] Initializing cgroup subsys ns
[    0.003828] Initializing cgroup subsys cpuacct
[    0.003831] Initializing cgroup subsys memory
[    0.003840] Initializing cgroup subsys net_cls
[    0.003852] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.003853] CPU: L2 Cache: 512K (64 bytes/line)
[    0.003856] CPU 0/0x0 -> Node 0
[    0.003858] tseg: 0000000000
[    0.003867] CPU: Physical Processor ID: 0
[    0.003868] CPU: Processor Core ID: 0
[    0.003870] mce: CPU supports 6 MCE banks
[    0.003877] using C1E aware idle routine
[    0.003879] Performance Counters: AMD PMU driver.
[    0.003882] ... version:                 0
[    0.003883] ... bit width:               48
[    0.003884] ... generic counters:        4
[    0.003885] ... value mask:              0000ffffffffffff
[    0.003887] ... max period:              00007fffffffffff
[    0.003888] ... fixed-purpose counters:  0
[    0.003889] ... counter mask:            000000000000000f
[    0.003900] ACPI: Core revision 20090521
[    0.015054] Setting APIC routing to flat
[    0.015356] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.025568] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[    0.025996] Booting processor 1 APIC 0x1 ip 0x6000
[    0.000999] Initializing CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 5200.42 BogoMIPS (lpj=2600214)
[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[    0.000999] CPU 1/0x1 -> Node 0
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 1
[    0.000999] mce: CPU supports 6 MCE banks
[    0.096309] CPU1: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[    0.096315] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.097007] System has AMD C1E enabled
[    0.097019] Switch to broadcast mode on CPU1
[    0.097043] Booting processor 2 APIC 0x2 ip 0x6000
[    0.000999] Initializing CPU#2
[    0.000999] Calibrating delay using timer specific routine.. 5200.91 BogoMIPS (lpj=2600459)
[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[    0.000999] CPU 2/0x2 -> Node 0
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 2
[    0.000999] mce: CPU supports 6 MCE banks
[    0.168241] CPU2: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[    0.168247] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.168999] Switch to broadcast mode on CPU2
[    0.169030] Booting processor 3 APIC 0x3 ip 0x6000
[    0.000999] Initializing CPU#3
[    0.000999] Calibrating delay using timer specific routine.. 5200.49 BogoMIPS (lpj=2600247)
[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[    0.000999] CPU 3/0x3 -> Node 0
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 3
[    0.000999] mce: CPU supports 6 MCE banks
[    0.240272] CPU3: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[    0.240278] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.240974] Brought up 4 CPUs
[    0.240976] Total of 4 processors activated (20802.45 BogoMIPS).
[    0.240986] Switch to broadcast mode on CPU3
[    0.241051] CPU0 attaching sched-domain:
[    0.241053]  domain 0: span 0-3 level MC
[    0.241055]   groups: 0 1 2 3
[    0.241060] CPU1 attaching sched-domain:
[    0.241062]  domain 0: span 0-3 level MC
[    0.241063]   groups: 1 2 3 0
[    0.241067] CPU2 attaching sched-domain:
[    0.241068]  domain 0: span 0-3 level MC
[    0.241070]   groups: 2 3 0 1
[    0.241073] CPU3 attaching sched-domain:
[    0.241074]  domain 0: span 0-3 level MC
[    0.241076]   groups: 3 0 1 2
[    0.241153] Switch to broadcast mode on CPU0
[    0.241153] Time: 19:19:33  Date: 09/17/09
[    0.241153] NET: Registered protocol family 16
[    0.241993] node 0 link 0: io port [1000, ffffff]
[    0.241993] TOM: 00000000d0000000 aka 3328M
[    0.241993] Fam 10h mmconf [e0000000, efffffff]
[    0.241993] node 0 link 0: mmio [a0000, bffff]
[    0.241993] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[    0.241993] node 0 link 0: mmio [f0000000, fe7fffff]
[    0.241993] node 0 link 0: mmio [fe800000, fe9fffff]
[    0.241993] node 0 link 0: mmio [fea00000, ffefffff]
[    0.241993] TOM2: 0000000130000000 aka 4864M
[    0.241993] bus: [00,07] on node 0 link 0
[    0.241993] bus: 00 index 0 io port: [0, ffff]
[    0.241993] bus: 00 index 1 mmio: [a0000, bffff]
[    0.241993] bus: 00 index 2 mmio: [d0000000, dfffffff]
[    0.241993] bus: 00 index 3 mmio: [f0000000, ffffffff]
[    0.241993] bus: 00 index 4 mmio: [130000000, fcffffffff]
[    0.242004] ACPI: bus type pci registered
[    0.242011] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.242011] PCI: Not using MMCONFIG.
[    0.242011] PCI: Using configuration type 1 for base access
[    0.242011] PCI: Using configuration type 1 for extended access
[    0.243984] bio: create slab <bio-0> at 0
[    0.244393] ACPI: EC: Look up EC in DSDT
[    0.254045] ACPI: Interpreter enabled
[    0.254048] ACPI: (supports S0 S1 S3 S5)
[    0.254063] ACPI: Using IOAPIC for interrupt routing
[    0.254110] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.258247] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.259801] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.266047] ACPI Warning: Incorrect checksum in table [OEMB] - B8, should be AF 20090521 tbutils-246
[    0.267046] ACPI: No dock devices found.
[    0.267185] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.267227] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.267227] pci 0000:00:05.0: PME# disabled
[    0.267227] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.267227] pci 0000:00:09.0: PME# disabled
[    0.267227] pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007]
[    0.267227] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003]
[    0.267227] pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007]
[    0.267227] pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003]
[    0.267227] pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f]
[    0.267227] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe7ffc00-0xfe7fffff]
[    0.267227] pci 0000:00:11.0: set SATA to AHCI mode
[    0.267227] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe7fe000-0xfe7fefff]
[    0.267261] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe7fd000-0xfe7fdfff]
[    0.267326] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe7ff800-0xfe7ff8ff]
[    0.267374] pci 0000:00:12.2: supports D1 D2
[    0.267375] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.267378] pci 0000:00:12.2: PME# disabled
[    0.267407] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe7fc000-0xfe7fcfff]
[    0.267456] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe7fb000-0xfe7fbfff]
[    0.267522] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe7ff400-0xfe7ff4ff]
[    0.267569] pci 0000:00:13.2: supports D1 D2
[    0.267570] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.267574] pci 0000:00:13.2: PME# disabled
[    0.267679] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[    0.267963] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[    0.267968] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[    0.267974] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[    0.267980] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[    0.268039] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe7f4000-0xfe7f7fff]
[    0.268078] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.268082] pci 0000:00:14.2: PME# disabled
[    0.268175] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe7fa000-0xfe7fafff]
[    0.268293] pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[    0.268297] pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff]
[    0.268299] pci 0000:01:05.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff]
[    0.268305] pci 0000:01:05.0: reg 24 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.268315] pci 0000:01:05.0: supports D1 D2
[    0.268329] pci 0000:01:05.1: reg 10 32bit mmio: [0xfe9e8000-0xfe9ebfff]
[    0.268345] pci 0000:01:05.1: supports D1 D2
[    0.268381] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.268384] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff]
[    0.268387] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.268425] pci 0000:02:00.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
[    0.268433] pci 0000:02:00.0: reg 14 32bit mmio: [0xfeaff400-0xfeaff47f]
[    0.268454] pci 0000:02:00.0: reg 20 32bit mmio: [0xfeaff000-0xfeaff07f]
[    0.268463] pci 0000:02:00.0: reg 24 32bit mmio: [0xfeafec00-0xfeafec7f]
[    0.268549] pci 0000:00:05.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.268580] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff]
[    0.268593] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[    0.268603] pci 0000:03:00.0: reg 20 64bit mmio: [0xfdff0000-0xfdffffff]
[    0.268608] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[    0.268634] pci 0000:03:00.0: supports D1 D2
[    0.268636] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.268639] pci 0000:03:00.0: PME# disabled
[    0.268690] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
[    0.268692] pci 0000:00:09.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.268695] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[    0.268752] pci 0000:00:14.4: transparent bridge
[    0.268772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.268974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.269062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.274036] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[    0.274135] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[    0.274237] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[    0.274336] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[    0.274441] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.274542] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.274650] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11 12 14 15)
[    0.274755] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.274995] PCI: Using ACPI for IRQ routing
[    0.278964] NET: Registered protocol family 8
[    0.278966] NET: Registered protocol family 20
[    0.278998] NetLabel: Initializing
[    0.278998] NetLabel:  domain hash size = 128
[    0.278998] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.278998] NetLabel:  unlabeled traffic allowed by default
[    0.279052] PCI-DMA: Disabling AGP.
[    0.279125] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    0.279125] PCI-DMA: using GART IOMMU.
[    0.279125] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.280664] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[    0.280670] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.282988] hpet: hpet2 irq 24 for MSI
[    0.290075] pnp: PnP ACPI init
[    0.290090] ACPI: bus type pnp registered
[    0.294293] pnp: PnP ACPI: found 14 devices
[    0.294294] ACPI: ACPI bus type pnp unregistered
[    0.294306] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.294309] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.294313] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.294315] system 00:0a: ioport range 0x40b-0x40b has been reserved
[    0.294317] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
[    0.294319] system 00:0a: ioport range 0xc00-0xc01 has been reserved
[    0.294321] system 00:0a: ioport range 0xc14-0xc14 has been reserved
[    0.294323] system 00:0a: ioport range 0xc50-0xc51 has been reserved
[    0.294325] system 00:0a: ioport range 0xc52-0xc52 has been reserved
[    0.294327] system 00:0a: ioport range 0xc6c-0xc6c has been reserved
[    0.294329] system 00:0a: ioport range 0xc6f-0xc6f has been reserved
[    0.294331] system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
[    0.294333] system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
[    0.294335] system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
[    0.294337] system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
[    0.294339] system 00:0a: ioport range 0xcd8-0xcdf has been reserved
[    0.294341] system 00:0a: ioport range 0x800-0x89f has been reserved
[    0.294343] system 00:0a: ioport range 0xb00-0xb0f has been reserved
[    0.294345] system 00:0a: ioport range 0xb20-0xb3f has been reserved
[    0.294347] system 00:0a: ioport range 0x900-0x90f has been reserved
[    0.294349] system 00:0a: ioport range 0x910-0x91f has been reserved
[    0.294351] system 00:0a: ioport range 0xfe00-0xfefe has been reserved
[    0.294353] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.294359] system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
[    0.294363] system 00:0b: ioport range 0x600-0x6df has been reserved
[    0.294364] system 00:0b: ioport range 0xae0-0xaef has been reserved
[    0.294372] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[    0.294376] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.294378] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[    0.294380] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.294382] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved
[    0.294384] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.299389] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.299391] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.299394] pci 0000:00:01.0:   MEM window: 0xfe800000-0xfe9fffff
[    0.299396] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.299400] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[    0.299401] pci 0000:00:05.0:   IO window: disabled
[    0.299404] pci 0000:00:05.0:   MEM window: 0xfea00000-0xfeafffff
[    0.299406] pci 0000:00:05.0:   PREFETCH window: disabled
[    0.299408] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[    0.299410] pci 0000:00:09.0:   IO window: 0xe000-0xefff
[    0.299412] pci 0000:00:09.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.299414] pci 0000:00:09.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[    0.299417] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
[    0.299419] pci 0000:00:14.4:   IO window: disabled
[    0.299423] pci 0000:00:14.4:   MEM window: disabled
[    0.299426] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.299436]   alloc irq_desc for 17 on node 0
[    0.299438]   alloc kstat_irqs on node 0
[    0.299443] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.299445] pci 0000:00:05.0: setting latency timer to 64
[    0.299449] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.299451] pci 0000:00:09.0: setting latency timer to 64
[    0.299459] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.299461] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.299463] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.299464] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe9fffff]
[    0.299466] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.299468] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.299470] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.299472] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.299473] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff]
[    0.299475] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.299477] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.299510] NET: Registered protocol family 2
[    0.299645] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.300653] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.303343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.303674] TCP: Hash tables configured (established 524288 bind 65536)
[    0.303676] TCP reno registered
[    0.303776] NET: Registered protocol family 1
[    0.303827] Trying to unpack rootfs image as initramfs...
[    0.436737] Freeing initrd memory: 7117k freed
[    0.440600] audit: initializing netlink socket (disabled)
[    0.440612] type=2000 audit(1253215172.439:1): initialized
[    0.445618] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.448331] VFS: Disk quotas dquot_6.5.2
[    0.448409] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.448501] msgmni has been set to 7422
[    0.448738] alg: No test for stdrng (krng)
[    0.448842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.448844] io scheduler noop registered
[    0.448846] io scheduler anticipatory registered
[    0.448847] io scheduler deadline registered
[    0.448906] io scheduler cfq registered (default)
[    0.568904] Switched to high resolution mode on CPU 3
[    0.568934] Switched to high resolution mode on CPU 1
[    0.568937] Switched to high resolution mode on CPU 2
[    0.568956] Switched to high resolution mode on CPU 0
[    0.570095] pci 0000:01:05.0: Boot video device
[    0.570276]   alloc irq_desc for 25 on node 0
[    0.570278]   alloc kstat_irqs on node 0
[    0.570286] pcieport-driver 0000:00:05.0: irq 25 for MSI/MSI-X
[    0.570291] pcieport-driver 0000:00:05.0: setting latency timer to 64
[    0.570428]   alloc irq_desc for 26 on node 0
[    0.570429]   alloc kstat_irqs on node 0
[    0.570434] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[    0.570437] pcieport-driver 0000:00:09.0: setting latency timer to 64
[    0.570822] uvesafb: failed to execute /sbin/v86d
[    0.570826] uvesafb: make sure that the v86d helper is installed and executable
[    0.570829] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    0.570832] uvesafb: vbe_init() failed with -22
[    0.570835] uvesafb: probe of uvesafb.0 failed with error -22
[    0.570956] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 6144k, total 16384k
[    0.570958] vesafb: mode is 1024x768x32, linelength=4096, pages=4
[    0.570959] vesafb: scrolling: redraw
[    0.570962] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.666269] Console: switching to colour frame buffer device 128x48
[    0.755013] fb0: VESA VGA frame buffer device
[    0.755224] processor LNXCPU:00: registered as cooling_device0
[    0.755226] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.755282] processor LNXCPU:01: registered as cooling_device1
[    0.755336] processor LNXCPU:02: registered as cooling_device2
[    0.755389] processor LNXCPU:03: registered as cooling_device3
[    0.790125] Linux agpgart interface v0.103
[    0.790129] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.790302] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.790876] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.792849] brd: module loaded
[    0.792910] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.792922] Uniform Multi-Platform E-IDE driver
[    0.793121] ide-gd driver 1.18
[    0.793374] PNP: No PS/2 controller found. Probing ports directly.
[    0.795625] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.795637] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.795849] mice: PS/2 mouse device common for all mice
[    0.795915] rtc_cmos 00:03: RTC can wake from S4
[    0.795980] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.796004] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.796075] f71882fg: Found f71882fg chip at 0x600, revision 32
[    0.796119] ACPI: I/O resource f71882fg [0x600-0x607] conflicts with ACPI region HMOR [0x605-0x606]
[    0.797730] ACPI: Device needs an ACPI driver
[    0.797816] cpuidle: using governor ladder
[    0.797818] cpuidle: using governor menu
[    0.798229] TCP cubic registered
[    0.798430] registered taskstats version 1
[    0.798555]   Magic number: 9:582:344
[    0.798612] tty tty61: hash matches
[    0.798672] rtc_cmos 00:03: setting system clock to 2009-09-17 19:19:33 UTC (1253215173)
[    0.798674] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.798676] EDD information not available.
[    0.798732] Freeing unused kernel memory: 1248k freed
[    0.799132] Write protecting the kernel read-only data: 5000k
[    0.986779] fuse init (API version 7.12)
[    1.067156] SCSI subsystem initialized
[    1.085519] libata version 3.00 loaded.
[    1.113175] ohci1394 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.113185] ohci1394 0000:02:00.0: setting latency timer to 64
[    1.114454] usbcore: registered new interface driver usbfs
[    1.114477] usbcore: registered new interface driver hub
[    1.114512] usbcore: registered new device driver usb
[    1.116341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.117377] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.118461] Floppy drive(s): fd0 is 1.44M
[    1.123768] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.123787] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.123819] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.123846] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    1.123862] ehci_hcd 0000:00:12.2: debug port 1
[    1.123882] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
[    1.125519] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.125543] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.125578] r8169 0000:03:00.0: setting latency timer to 64
[    1.125609]   alloc irq_desc for 27 on node 0
[    1.125611]   alloc kstat_irqs on node 0
[    1.125624] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[    1.125842] eth0: RTL8168c/8111c at 0xffffc90000664000, 00:21:85:9d:fc:04, XID 3c4000c0 IRQ 27
[    1.129173] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.129309] usb usb1: configuration #1 chosen from 1 choice
[    1.129338] hub 1-0:1.0: USB hub found
[    1.129346] hub 1-0:1.0: 6 ports detected
[    1.131098]   alloc irq_desc for 16 on node 0
[    1.131102]   alloc kstat_irqs on node 0
[    1.131111] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.131134] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.131153] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[    1.131192] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
[    1.132920] FDC 0 is a post-1991 82077
[    1.166090] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.186197] usb usb2: configuration #1 chosen from 1 choice
[    1.186226] hub 2-0:1.0: USB hub found
[    1.186237] hub 2-0:1.0: 3 ports detected
[    1.186362] ahci 0000:00:11.0: version 3.0
[    1.186381]   alloc irq_desc for 22 on node 0
[    1.186382]   alloc kstat_irqs on node 0
[    1.186392] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.186498] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.186502] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.186779] scsi0 : ahci
[    1.187623] scsi1 : ahci
[    1.187964] scsi2 : ahci
[    1.188015] scsi3 : ahci
[    1.188095] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
[    1.188099] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
[    1.188101] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
[    1.188104] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
[    1.188202] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.188229] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    1.188305] scsi4 : pata_atiixp
[    1.188353] scsi5 : pata_atiixp
[    1.189409] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.189411] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.189613]   alloc irq_desc for 19 on node 0
[    1.189615]   alloc kstat_irqs on node 0
[    1.189621] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.189638] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.189653] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[    1.189678] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    1.189695] ehci_hcd 0000:00:13.2: debug port 1
[    1.189709] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400
[    1.195019] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.195158] usb usb3: configuration #1 chosen from 1 choice
[    1.195186] hub 3-0:1.0: USB hub found
[    1.195195] hub 3-0:1.0: 6 ports detected
[    1.195350] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.195372] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    1.195390] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.195409] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
[    1.250168] usb usb4: configuration #1 chosen from 1 choice
[    1.250194] hub 4-0:1.0: USB hub found
[    1.250204] hub 4-0:1.0: 3 ports detected
[    1.250315]   alloc irq_desc for 18 on node 0
[    1.250316]   alloc kstat_irqs on node 0
[    1.250324] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.250346] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.250357] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.250383] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
[    1.305174] usb usb5: configuration #1 chosen from 1 choice
[    1.305195] hub 5-0:1.0: USB hub found
[    1.305202] hub 5-0:1.0: 3 ports detected
[    1.305279] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.305288] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.305296] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.305309] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
[    1.354830] ata5.01: ATA-7: HDT722520DLAT80, V44OA96A, max UDMA/133
[    1.354833] ata5.01: 390721968 sectors, multi 16: LBA48 
[    1.360855] ata5.01: configured for UDMA/100
[    1.361164] usb usb6: configuration #1 chosen from 1 choice
[    1.361182] hub 6-0:1.0: USB hub found
[    1.361190] hub 6-0:1.0: 3 ports detected
[    1.361274] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.361284] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.361292] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.361310] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000
[    1.417166] usb usb7: configuration #1 chosen from 1 choice
[    1.417184] hub 7-0:1.0: USB hub found
[    1.417191] hub 7-0:1.0: 2 ports detected
[    1.482100] usb 1-2: new high speed USB device using ehci_hcd and address 3
[    1.493116] ata4: SATA link down (SStatus 0 SControl 300)
[    1.493120] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.493157] ata1: SATA link down (SStatus 0 SControl 300)
[    1.493159] ata3: SATA link down (SStatus 0 SControl 300)
[    1.493409] ata2.00: ATAPI: ASUS    DRW-20B1LT, 1.01, max UDMA/100
[    1.494294] ata2.00: configured for UDMA/100
[    1.507184] scsi 1:0:0:0: CD-ROM            ASUS     DRW-20B1LT       1.01 PQ: 0 ANSI: 5
[    1.507391] scsi 4:0:1:0: Direct-Access     ATA      HDT722520DLAT80  V44O PQ: 0 ANSI: 5
[    1.621400] usb 1-2: configuration #1 chosen from 1 choice
[    1.685436] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.685439] Uniform CD-ROM driver Revision: 3.20
[    1.685525] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.685649] sd 4:0:1:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    1.685679] sd 4:0:1:0: [sda] Write Protect is off
[    1.685681] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.685695] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.685783]  sda:
[    1.689583] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.689614] sd 4:0:1:0: Attached scsi generic sg1 type 0
[    1.699601]  sda1 sda2
[    1.699785] sd 4:0:1:0: [sda] Attached SCSI disk
[    1.851268] usb 2-1: new low speed USB device using ohci_hcd and address 2
[    2.002057] usb 2-1: configuration #1 chosen from 1 choice
[    2.015626] usbcore: registered new interface driver hiddev
[    2.021234] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.0/input/input1
[    2.021325] generic-usb 0003:09DA:024F.0001: input,hidraw0: USB HID v1.11 Keyboard [A4Tech RF USB Receiver] on usb-0000:00:12.0-1/input0
[    2.029305] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.1/input/input2
[    2.029371] generic-usb 0003:09DA:024F.0002: input,hidraw1: USB HID v1.11 Mouse [A4Tech RF USB Receiver] on usb-0000:00:12.0-1/input1
[    2.029384] usbcore: registered new interface driver usbhid
[    2.029387] usbhid: v2.6:USB HID core driver
[    2.031585] EXT4-fs (sda1): barriers enabled
[    2.049392] kjournald2 starting: pid 2468, dev sda1:8, commit interval 5 seconds
[    2.049404] EXT4-fs (sda1): delayed allocation enabled
[    2.049407] EXT4-fs: file extents enabled
[    2.050527] EXT4-fs: mballoc enabled
[    2.050539] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    2.430239] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc00016e5d3f]
[    6.083818] udev: starting version 141
[    6.460899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.460906] ACPI: Power Button [PWRF]
[    6.460963] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    6.460969] ACPI: Power Button [PWRB]
[    6.677608] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.763053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.778310] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[    6.778314] shpchp 0000:00:01.0: Cannot reserve MMIO region
[    6.779382] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.978195] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    6.978200] Disabling lock debugging due to kernel taint
[    6.995612] [fglrx] Maximum main memory to use for locked dma buffers: 3554 MBytes.
[    6.995636] [fglrx]   vendor: 1002 device: 9614 count: 1
[    6.995838] [fglrx] ioport: bar 1, base 0xd000, size: 0x100
[    6.995851] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.995854] pci 0000:01:05.0: setting latency timer to 64
[    6.997039] [fglrx] Driver built-in PAT support is enabled successfully
[    6.997071] [fglrx] module loaded - fglrx 8.66.10 [Sep  3 2009] with 1 minors
[    7.114311] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.139256] 3:3:1: cannot get freq at ep 0x84
[    7.148934] usbcore: registered new interface driver snd-usb-audio
[    7.161997] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS...
[    7.162181] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[    7.166615] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    7.166640] HDA Intel 0000:01:05.1: setting latency timer to 64
[    7.457470] EXT4-fs (sda1): internal journal on sda1:8
[   10.805928] Bluetooth: Core ver 2.15
[   10.805981] NET: Registered protocol family 31
[   10.805982] Bluetooth: HCI device and connection manager initialized
[   10.805985] Bluetooth: HCI socket layer initialized
[   10.819007] Bluetooth: L2CAP ver 2.13
[   10.819009] Bluetooth: L2CAP socket layer initialized
[   10.822673] Bluetooth: SCO (Voice Link) ver 0.6
[   10.822674] Bluetooth: SCO socket layer initialized
[   10.826452] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.826454] Bluetooth: BNEP filters: protocol multicast
[   10.861345] Bridge firewalling registered
[   11.046553] Bluetooth: RFCOMM TTY layer initialized
[   11.046561] Bluetooth: RFCOMM socket layer initialized
[   11.046562] Bluetooth: RFCOMM ver 1.11
[   12.314986] [fglrx] GART Table is not in FRAME_BUFFER range 
[   12.315139]   alloc irq_desc for 28 on node 0
[   12.315142]   alloc kstat_irqs on node 0
[   12.315152] fglrx_pci 0000:01:05.0: irq 28 for MSI/MSI-X
[   12.315528] [fglrx] Firegl kernel thread PID: 5210
[   12.415430] NET: Registered protocol family 10
[   12.415777] lo: Disabled Privacy Extensions

and i atach my kernel .config
Comment 1 Stoner.Di 2009-09-17 19:36:08 UTC 
Created attachment 23114 [details]
kernel config with bug ACPI
Comment 2 Zhang Rui 2009-09-18 02:17:37 UTC 

*** This bug has been marked as a duplicate of bug 13939 ***