Bug 14117
Summary: | Kernel boot crash on m/b ASROCK P4i65GV, in "intel_agp" module | ||
---|---|---|---|
Product: | Drivers | Reporter: | IvankoB (brefi) |
Component: | Video(AGP) | Assignee: | Dave Airlie (airlied) |
Status: | RESOLVED OBSOLETE | ||
Severity: | blocking | CC: | akpm, alan, gisalfa, platform_i386 |
Priority: | P1 | ||
Hardware: | All | ||
OS: | Linux | ||
Kernel Version: | 2.6.30 | Subsystem: | |
Regression: | No | Bisected commit-id: | |
Attachments: | The crash sreen shot |
The crash is actually in smp_apic_timer_interrupt() so let's cc the x86 guys. Have You done the CC by yourself ? I can confirm this bug with Asrock P4i65GV. It happens only if i use the legacy video card. I have a nvidia 6200 agp card. Blacklisting intel_agp module in etc/modprobe.d/blacklist.conf give me a workaround. Using the integrated graphics the system boots fine. >> Blacklisting intel_agp module in
>> etc/modprobe.d/blacklist.conf give me a
>> workaround.
Not a solution since the lack of AGP support fully disables any graphics accelaration & limits max resolution to 800x600 :(
Closing as obsolete, if this is still seen with modern kernels please re-open and update |
Created attachment 23006 [details] The crash sreen shot Removing the module from "/lib/modules/*" fixes booting but for the price of absenting APG fucntionality ( screen resolution > 800x600 etc ). The crash occurs on "udev" initalization procedures. See the attachment for details. Also, there's "kernel.log" of the last successful boot: //------------------------------ Aug 30 08:54:10 vano-linux kernel: imklog 3.18.6, log source = /proc/kmsg started. Aug 30 08:54:10 vano-linux kernel: I 0-23 Aug 30 08:54:10 vano-linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Aug 30 08:54:10 vano-linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Aug 30 08:54:10 vano-linux kernel: ACPI: IRQ0 used by override. Aug 30 08:54:10 vano-linux kernel: ACPI: IRQ2 used by override. Aug 30 08:54:10 vano-linux kernel: ACPI: IRQ9 used by override. Aug 30 08:54:10 vano-linux kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Aug 30 08:54:10 vano-linux kernel: Using ACPI (MADT) for SMP configuration information Aug 30 08:54:10 vano-linux kernel: SMP: Allowing 2 CPUs, 1 hotplug CPUs Aug 30 08:54:10 vano-linux kernel: nr_irqs_gsi: 24 Aug 30 08:54:10 vano-linux kernel: Allocating PCI resources starting at 30000000 (gap: 20000000:dfbc0000) Aug 30 08:54:10 vano-linux kernel: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 Aug 30 08:54:10 vano-linux kernel: PERCPU: Embedded 11 pages at c1402000, static data 20828 bytes Aug 30 08:54:10 vano-linux kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129744 Aug 30 08:54:10 vano-linux kernel: Kernel command line: root=/dev/sda3 ro quiet Aug 30 08:54:10 vano-linux kernel: Enabling fast FPU save and restore... done. Aug 30 08:54:10 vano-linux kernel: Enabling unmasked SIMD FPU exception support... done. Aug 30 08:54:10 vano-linux kernel: Initializing CPU#0 Aug 30 08:54:10 vano-linux kernel: NR_IRQS:320 Aug 30 08:54:10 vano-linux kernel: PID hash table entries: 2048 (order: 11, 8192 bytes) Aug 30 08:54:10 vano-linux kernel: Fast TSC calibration using PIT Aug 30 08:54:10 vano-linux kernel: Detected 2396.738 MHz processor. Aug 30 08:54:10 vano-linux kernel: Console: colour VGA+ 80x25 Aug 30 08:54:10 vano-linux kernel: console [tty0] enabled Aug 30 08:54:10 vano-linux kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Aug 30 08:54:10 vano-linux kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Aug 30 08:54:10 vano-linux kernel: Initializing HighMem for node 0 (00000000:00000000) Aug 30 08:54:10 vano-linux kernel: Memory: 514348k/523520k available (2370k kernel code, 8576k reserved, 1077k data, 268k init, 0k highmem) Aug 30 08:54:10 vano-linux kernel: virtual kernel memory layout: Aug 30 08:54:10 vano-linux kernel: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) Aug 30 08:54:10 vano-linux kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB) Aug 30 08:54:10 vano-linux kernel: vmalloc : 0xe0740000 - 0xff7fe000 ( 496 MB) Aug 30 08:54:10 vano-linux kernel: lowmem : 0xc0000000 - 0xdff40000 ( 511 MB) Aug 30 08:54:10 vano-linux kernel: .init : 0xc0466000 - 0xc04a9000 ( 268 kB) Aug 30 08:54:10 vano-linux kernel: .data : 0xc0350ae5 - 0xc045e1a0 (1077 kB) Aug 30 08:54:10 vano-linux kernel: .text : 0xc0100000 - 0xc0350ae5 (2370 kB) Aug 30 08:54:10 vano-linux kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok. Aug 30 08:54:10 vano-linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4793.47 BogoMIPS (lpj=9586952) Aug 30 08:54:10 vano-linux kernel: Security Framework initialized Aug 30 08:54:10 vano-linux kernel: Mount-cache hash table entries: 512 Aug 30 08:54:10 vano-linux kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K Aug 30 08:54:10 vano-linux kernel: CPU: L2 cache: 1024K Aug 30 08:54:10 vano-linux kernel: CPU: Hyper-Threading is disabled Aug 30 08:54:10 vano-linux kernel: Intel machine check architecture supported. Aug 30 08:54:10 vano-linux kernel: Intel machine check reporting enabled on CPU#0. Aug 30 08:54:10 vano-linux kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Aug 30 08:54:10 vano-linux kernel: CPU0: Thermal monitoring enabled Aug 30 08:54:10 vano-linux kernel: using mwait in idle threads. Aug 30 08:54:10 vano-linux kernel: Checking 'hlt' instruction... OK. Aug 30 08:54:10 vano-linux kernel: SMP alternatives: switching to UP code Aug 30 08:54:10 vano-linux kernel: ACPI: Core revision 20090320 Aug 30 08:54:10 vano-linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Aug 30 08:54:10 vano-linux kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 01 Aug 30 08:54:10 vano-linux kernel: Brought up 1 CPUs Aug 30 08:54:10 vano-linux kernel: Total of 1 processors activated (4793.47 BogoMIPS). Aug 30 08:54:10 vano-linux kernel: CPU0 attaching NULL sched-domain. Aug 30 08:54:10 vano-linux kernel: net_namespace: 732 bytes Aug 30 08:54:10 vano-linux kernel: NET: Registered protocol family 16 Aug 30 08:54:10 vano-linux kernel: ACPI: bus type pci registered Aug 30 08:54:10 vano-linux kernel: dca service started, version 1.8 Aug 30 08:54:10 vano-linux kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 Aug 30 08:54:10 vano-linux kernel: PCI: Using configuration type 1 for base access Aug 30 08:54:10 vano-linux kernel: bio: create slab <bio-0> at 0 Aug 30 08:54:10 vano-linux kernel: ACPI: EC: Look up EC in DSDT Aug 30 08:54:10 vano-linux kernel: ACPI: Interpreter enabled Aug 30 08:54:10 vano-linux kernel: ACPI: (supports S0 S1 S3 S5) Aug 30 08:54:10 vano-linux kernel: ACPI: Using IOAPIC for interrupt routing Aug 30 08:54:10 vano-linux kernel: ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 1A, should be 0D [20090320] Aug 30 08:54:10 vano-linux kernel: ACPI: No dock devices found. Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Aug 30 08:54:10 vano-linux kernel: pci 0000:00:00.0: reg 10 32bit mmio: [0xfe800000-0xfebfffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:02.0: reg 14 32bit mmio: [0xfe780000-0xfe7fffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:02.0: reg 18 io port: [0xec00-0xec07] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1d.1: reg 20 io port: [0xe000-0xe01f] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1d.3: reg 20 io port: [0xe800-0xe81f] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe77fc00-0xfe77ffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1d.7: PME# disabled Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.5: reg 14 io port: [0xd400-0xd43f] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.5: reg 18 32bit mmio: [0xfe77f800-0xfe77f9ff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfe77f400-0xfe77f4ff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1f.5: PME# disabled Aug 30 08:54:10 vano-linux kernel: pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xe7ffffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:01:00.0: reg 30 32bit mmio: [0xfe5f0000-0xfe5fffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:01:02.0: reg 10 io port: [0xc800-0xc8ff] Aug 30 08:54:10 vano-linux kernel: pci 0000:01:02.0: reg 14 32bit mmio: [0xfe5efc00-0xfe5efcff] Aug 30 08:54:10 vano-linux kernel: pci 0000:01:02.0: reg 30 32bit mmio: [0xfffc0000-0xffffffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:01:02.0: PME# supported from D3hot D3cold Aug 30 08:54:10 vano-linux kernel: pci 0000:01:02.0: PME# disabled Aug 30 08:54:10 vano-linux kernel: pci 0000:01:05.0: reg 10 io port: [0xc400-0xc4ff] Aug 30 08:54:10 vano-linux kernel: pci 0000:01:05.0: reg 14 32bit mmio: [0xfe5ef800-0xfe5ef8ff] Aug 30 08:54:10 vano-linux kernel: pci 0000:01:05.0: supports D1 D2 Aug 30 08:54:10 vano-linux kernel: pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold Aug 30 08:54:10 vano-linux kernel: pci 0000:01:05.0: PME# disabled Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: transparent bridge Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: bridge 32bit mmio: [0xfc500000-0xfe5fffff] Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: bridge 32bit mmio pref: [0xdc400000-0xec3fffff] Aug 30 08:54:10 vano-linux kernel: pci_bus 0000:00: on NUMA node 0 Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) Aug 30 08:54:10 vano-linux kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) Aug 30 08:54:10 vano-linux kernel: SCSI subsystem initialized Aug 30 08:54:10 vano-linux kernel: libata version 3.00 loaded. Aug 30 08:54:10 vano-linux kernel: PCI: Using ACPI for IRQ routing Aug 30 08:54:10 vano-linux kernel: hpet clockevent registered Aug 30 08:54:10 vano-linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Aug 30 08:54:10 vano-linux kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter Aug 30 08:54:10 vano-linux kernel: pnp: PnP ACPI init Aug 30 08:54:10 vano-linux kernel: ACPI: bus type pnp registered Aug 30 08:54:10 vano-linux kernel: pnp: PnP ACPI: found 14 devices Aug 30 08:54:10 vano-linux kernel: ACPI: ACPI bus type pnp unregistered Aug 30 08:54:10 vano-linux kernel: PnPBIOS: Disabled by ACPI PNP Aug 30 08:54:10 vano-linux kernel: system 00:07: ioport range 0x4d0-0x4d1 has been reserved Aug 30 08:54:10 vano-linux kernel: system 00:07: ioport range 0x800-0x87f has been reserved Aug 30 08:54:10 vano-linux kernel: system 00:07: ioport range 0x480-0x4bf has been reserved Aug 30 08:54:10 vano-linux kernel: system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved Aug 30 08:54:10 vano-linux kernel: system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved Aug 30 08:54:10 vano-linux kernel: system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved Aug 30 08:54:10 vano-linux kernel: system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved Aug 30 08:54:10 vano-linux kernel: system 00:0c: ioport range 0x680-0x6ff has been reserved Aug 30 08:54:10 vano-linux kernel: system 00:0c: ioport range 0x295-0x296 has been reserved Aug 30 08:54:10 vano-linux kernel: system 00:0d: iomem range 0x0-0x9ffff could not be reserved Aug 30 08:54:10 vano-linux kernel: system 00:0d: iomem range 0xc0000-0xdffff could not be reserved Aug 30 08:54:10 vano-linux kernel: system 00:0d: iomem range 0xe0000-0xfffff could not be reserved Aug 30 08:54:10 vano-linux kernel: system 00:0d: iomem range 0x100000-0x1fffffff could not be reserved Aug 30 08:54:10 vano-linux kernel: system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: IO window: 0xc000-0xcfff Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: MEM window: 0xfc500000-0xfe5fffff Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: PREFETCH window: 0x000000dc400000-0x000000ec3fffff Aug 30 08:54:10 vano-linux kernel: pci 0000:00:1e.0: setting latency timer to 64 Aug 30 08:54:10 vano-linux kernel: pci_bus 0000:00: resource 0 io: [0x00-0xffff] Aug 30 08:54:10 vano-linux kernel: pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Aug 30 08:54:10 vano-linux kernel: pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] Aug 30 08:54:10 vano-linux kernel: pci_bus 0000:01: resource 1 mem: [0xfc500000-0xfe5fffff] Aug 30 08:54:10 vano-linux kernel: pci_bus 0000:01: resource 2 pref mem [0xdc400000-0xec3fffff] Aug 30 08:54:10 vano-linux kernel: pci_bus 0000:01: resource 3 io: [0x00-0xffff] Aug 30 08:54:10 vano-linux kernel: pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] Aug 30 08:54:10 vano-linux kernel: NET: Registered protocol family 2 Aug 30 08:54:10 vano-linux kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes) Aug 30 08:54:10 vano-linux kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes) Aug 30 08:54:10 vano-linux kernel: TCP bind hash table entries: 16384 (order: 5, 131072 bytes) Aug 30 08:54:10 vano-linux kernel: TCP: Hash tables configured (established 16384 bind 16384) Aug 30 08:54:10 vano-linux kernel: TCP reno registered Aug 30 08:54:10 vano-linux kernel: NET: Registered protocol family 1 Aug 30 08:54:10 vano-linux kernel: msgmni has been set to 1004 Aug 30 08:54:10 vano-linux kernel: alg: No test for stdrng (krng) Aug 30 08:54:10 vano-linux kernel: io scheduler noop registered Aug 30 08:54:10 vano-linux kernel: io scheduler anticipatory registered Aug 30 08:54:10 vano-linux kernel: io scheduler deadline registered Aug 30 08:54:10 vano-linux kernel: io scheduler cfq registered (default) Aug 30 08:54:10 vano-linux kernel: pci 0000:01:00.0: Boot video device Aug 30 08:54:10 vano-linux kernel: input: Power Button as /class/input/input0 Aug 30 08:54:10 vano-linux kernel: ACPI: Power Button [PWRF] Aug 30 08:54:10 vano-linux kernel: input: Power Button as /class/input/input1 Aug 30 08:54:10 vano-linux kernel: ACPI: Power Button [PWRB] Aug 30 08:54:10 vano-linux kernel: processor ACPI_CPU:00: registered as cooling_device0 Aug 30 08:54:10 vano-linux kernel: isapnp: Scanning for PnP cards... Aug 30 08:54:10 vano-linux kernel: isapnp: No Plug & Play device found Aug 30 08:54:10 vano-linux kernel: Switched to high resolution mode on CPU 0 Aug 30 08:54:10 vano-linux kernel: lp: driver loaded but no devices found Aug 30 08:54:10 vano-linux kernel: Real Time Clock Driver v1.12b Aug 30 08:54:10 vano-linux kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Aug 30 08:54:10 vano-linux kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Aug 30 08:54:10 vano-linux kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Aug 30 08:54:10 vano-linux kernel: parport_pc 00:06: reported by Plug and Play ACPI Aug 30 08:54:10 vano-linux kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] Aug 30 08:54:10 vano-linux kernel: lp0: using parport0 (interrupt-driven). Aug 30 08:54:10 vano-linux kernel: Floppy drive(s): fd0 is 1.44M Aug 30 08:54:10 vano-linux kernel: FDC 0 is a post-1991 82077 Aug 30 08:54:10 vano-linux kernel: loop: module loaded Aug 30 08:54:10 vano-linux kernel: Driver 'sd' needs updating - please use bus_type methods Aug 30 08:54:10 vano-linux kernel: Driver 'sr' needs updating - please use bus_type methods Aug 30 08:54:10 vano-linux kernel: ata_piix 0000:00:1f.2: version 2.13 Aug 30 08:54:10 vano-linux kernel: ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Aug 30 08:54:10 vano-linux kernel: ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ] Aug 30 08:54:10 vano-linux kernel: ata_piix 0000:00:1f.2: setting latency timer to 64 Aug 30 08:54:10 vano-linux kernel: scsi0 : ata_piix Aug 30 08:54:10 vano-linux kernel: scsi1 : ata_piix Aug 30 08:54:10 vano-linux kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 Aug 30 08:54:10 vano-linux kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 Aug 30 08:54:10 vano-linux kernel: PPP generic driver version 2.4.2 Aug 30 08:54:10 vano-linux kernel: PPP Deflate Compression module registered Aug 30 08:54:10 vano-linux kernel: PPP BSD Compression module registered Aug 30 08:54:10 vano-linux kernel: PPP MPPE Compression module registered Aug 30 08:54:10 vano-linux kernel: NET: Registered protocol family 24 Aug 30 08:54:10 vano-linux kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Aug 30 08:54:10 vano-linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 30 08:54:10 vano-linux kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Aug 30 08:54:10 vano-linux kernel: mice: PS/2 mouse device common for all mice Aug 30 08:54:10 vano-linux kernel: cpuidle: using governor ladder Aug 30 08:54:10 vano-linux kernel: cpuidle: using governor menu Aug 30 08:54:10 vano-linux kernel: Advanced Linux Sound Architecture Driver Version 1.0.20. Aug 30 08:54:10 vano-linux kernel: ALSA device list: Aug 30 08:54:10 vano-linux kernel: No soundcards found. Aug 30 08:54:10 vano-linux kernel: TCP cubic registered Aug 30 08:54:10 vano-linux kernel: NET: Registered protocol family 17 Aug 30 08:54:10 vano-linux kernel: Using IPI No-Shortcut mode Aug 30 08:54:10 vano-linux kernel: input: AT Translated Set 2 keyboard as /class/input/input2 Aug 30 08:54:10 vano-linux kernel: ata1.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133 Aug 30 08:54:10 vano-linux kernel: ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) Aug 30 08:54:10 vano-linux kernel: ata1.00: configured for UDMA/133 Aug 30 08:54:10 vano-linux kernel: scsi 0:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5 Aug 30 08:54:10 vano-linux kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) Aug 30 08:54:10 vano-linux kernel: sd 0:0:0:0: [sda] Write Protect is off Aug 30 08:54:10 vano-linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Aug 30 08:54:10 vano-linux kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 30 08:54:10 vano-linux kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 > Aug 30 08:54:10 vano-linux kernel: sd 0:0:0:0: [sda] Attached SCSI disk Aug 30 08:54:10 vano-linux kernel: ata2.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL05, max UDMA/66 Aug 30 08:54:10 vano-linux kernel: ata2.00: configured for UDMA/66 Aug 30 08:54:10 vano-linux kernel: scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1P KL05 PQ: 0 ANSI: 5 Aug 30 08:54:10 vano-linux kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Aug 30 08:54:10 vano-linux kernel: Uniform CD-ROM driver Revision: 3.20 Aug 30 08:54:10 vano-linux kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0 Aug 30 08:54:10 vano-linux kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input3 Aug 30 08:54:10 vano-linux kernel: kjournald starting. Commit interval 5 seconds Aug 30 08:54:10 vano-linux kernel: EXT3-fs: mounted filesystem with writeback data mode. Aug 30 08:54:10 vano-linux kernel: VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Aug 30 08:54:10 vano-linux kernel: Freeing unused kernel memory: 268k freed Aug 30 08:54:10 vano-linux kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Aug 30 08:54:10 vano-linux kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5 Aug 30 08:54:10 vano-linux kernel: Linux agpgart interface v0.103 Aug 30 08:54:10 vano-linux kernel: usbcore: registered new interface driver usbfs Aug 30 08:54:10 vano-linux kernel: usbcore: registered new interface driver hub Aug 30 08:54:10 vano-linux kernel: usbcore: registered new device driver usb Aug 30 08:54:10 vano-linux kernel: uhci_hcd: USB Universal Host Controller Interface driver Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00 Aug 30 08:54:10 vano-linux kernel: usb usb1: configuration #1 chosen from 1 choice Aug 30 08:54:10 vano-linux kernel: hub 1-0:1.0: USB hub found Aug 30 08:54:10 vano-linux kernel: hub 1-0:1.0: 2 ports detected Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000 Aug 30 08:54:10 vano-linux kernel: usb usb2: configuration #1 chosen from 1 choice Aug 30 08:54:10 vano-linux kernel: hub 2-0:1.0: USB hub found Aug 30 08:54:10 vano-linux kernel: hub 2-0:1.0: 2 ports detected Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400 Aug 30 08:54:10 vano-linux kernel: usb usb3: configuration #1 chosen from 1 choice Aug 30 08:54:10 vano-linux kernel: hub 3-0:1.0: USB hub found Aug 30 08:54:10 vano-linux kernel: hub 3-0:1.0: 2 ports detected Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 Aug 30 08:54:10 vano-linux kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800 Aug 30 08:54:10 vano-linux kernel: usb usb4: configuration #1 chosen from 1 choice Aug 30 08:54:10 vano-linux kernel: hub 4-0:1.0: USB hub found Aug 30 08:54:10 vano-linux kernel: hub 4-0:1.0: 2 ports detected Aug 30 08:54:10 vano-linux kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 30 08:54:10 vano-linux kernel: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after Aug 30 08:54:10 vano-linux kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 Aug 30 08:54:10 vano-linux kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64 Aug 30 08:54:10 vano-linux kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 30 08:54:10 vano-linux kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 Aug 30 08:54:10 vano-linux kernel: ehci_hcd 0000:00:1d.7: debug port 1 Aug 30 08:54:10 vano-linux kernel: ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported Aug 30 08:54:10 vano-linux kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe77fc00 Aug 30 08:54:10 vano-linux kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 30 08:54:10 vano-linux kernel: usb usb5: configuration #1 chosen from 1 choice Aug 30 08:54:10 vano-linux kernel: hub 5-0:1.0: USB hub found Aug 30 08:54:10 vano-linux kernel: hub 5-0:1.0: 8 ports detected Aug 30 08:54:10 vano-linux kernel: intel_rng: FWH not detected Aug 30 08:54:10 vano-linux kernel: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Aug 30 08:54:10 vano-linux kernel: Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Aug 30 08:54:10 vano-linux kernel: Intel ICH 0000:00:1f.5: setting latency timer to 64 Aug 30 08:54:10 vano-linux kernel: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Aug 30 08:54:10 vano-linux kernel: 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too Aug 30 08:54:10 vano-linux kernel: 8139too Fast Ethernet driver 0.9.28 Aug 30 08:54:10 vano-linux kernel: 8139too 0000:01:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Aug 30 08:54:10 vano-linux kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) Aug 30 08:54:10 vano-linux kernel: eth0: RealTek RTL8139 at 0xc400, 00:0b:6a:e5:bf:54, IRQ 22 Aug 30 08:54:10 vano-linux kernel: eth0: Identified 8139 chip type 'RTL-8101' Aug 30 08:54:10 vano-linux kernel: dmfe 0000:01:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 30 08:54:10 vano-linux kernel: eth1: Davicom DM9102 at pci0000:01:02.0, 00:80:ad:0b:1c:d8, irq 23. Aug 30 08:54:10 vano-linux kernel: Linux Tulip driver version 1.1.15 (Feb 27, 2007) Aug 30 08:54:10 vano-linux kernel: udev: renamed network interface eth1 to eth0 Aug 30 08:54:10 vano-linux kernel: udev: renamed network interface eth0_rename to eth1 Aug 30 08:54:10 vano-linux kernel: intel8x0_measure_ac97_clock: measured 55725 usecs (2685 samples) Aug 30 08:54:10 vano-linux kernel: intel8x0: clocking to 48000 Aug 30 08:54:10 vano-linux kernel: Adding 409648k swap on /dev/sda2. Priority:-1 extents:1 across:409648k Aug 30 08:54:10 vano-linux kernel: EXT3 FS on sda3, internal journal Aug 30 08:54:10 vano-linux kernel: Initializing USB Mass Storage driver... Aug 30 08:54:10 vano-linux kernel: usbcore: registered new interface driver usb-storage Aug 30 08:54:10 vano-linux kernel: USB Mass Storage support registered. Aug 30 08:54:10 vano-linux kernel: NTFS driver 2.1.29 [Flags: R/W MODULE]. Aug 30 08:54:10 vano-linux kernel: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Aug 30 08:54:10 vano-linux kernel: NTFS volume version 3.1. Aug 30 08:54:10 vano-linux kernel: NTFS volume version 3.1. Aug 30 08:54:10 vano-linux kernel: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 //------------------------------