Bug 14114

Summary: Tuning a saa7134 based card is broken in kernel 2.6.31-rc7
Product: v4l-dvb Reporter: Tsvety Petrov (Tsvetoslav.Petrov)
Component: saa7134Assignee: v4l-dvb_saa7134 (v4l-dvb_saa7134)
Status: CLOSED CODE_FIX    
Severity: normal CC: bugzilla.kernel.org, florian, matthias, mchehab, pavel, pd_leth, rjw, vaka
Priority: P1    
Hardware: All   
OS: Linux   
Kernel Version: 2.6.31-rc7 Subsystem:
Regression: Yes Bisected commit-id:
Bug Depends on:    
Bug Blocks: 13615    
Attachments: Full dmesg output 2.6.31-6
Full dmesg output 2.6.31-9 (not working)
see comments

Description Tsvety Petrov 2009-09-03 21:06:51 UTC
I have "PixelView PlayTV Pro 3" TV/radio tuner card, and it worked fine with the 2.6.31-6 kernel and the previous versions.
The kernel module is loaded with the following options:
options saa7134 card=42 tuner=38
given in /etc/modprobe.d/options.conf file.
After the system upgrade to kernel 2.6.31-7 a week or two ago, the card stopped working. Namely, if for example I start gnome-radio program, there is a noise coming from the card like of not tuned radio, but changing the station/frequency does not seem to work at all. If I restart the system and select the old kernel 2.6.31-6, it works again.
Yesterday the system was upgraded to kernel 2.6.31-9, but the problem still exists with it.
I found in patch-2.6.31-rc6-git8.log log file that there are changes in the i2c* and saa7134 drivers and I suppose some of this changes caused the problem.
FYI, I'm using Ubuntu Karmic (development branch) with all recent upgrades.
Comment 1 Mauro Carvalho Chehab 2009-09-07 04:44:28 UTC
Could you please provide the dmesg output for both 2.6.31-6 and the latest -git?
Comment 2 Tsvety Petrov 2009-09-07 06:14:29 UTC
Created attachment 23027 [details]
Full dmesg output 2.6.31-6
Comment 3 Tsvety Petrov 2009-09-07 06:15:59 UTC
Created attachment 23028 [details]
Full dmesg output 2.6.31-9 (not working)
Comment 4 Tsvety Petrov 2009-09-07 06:18:59 UTC
And here is a part of the dmesg output for both 2.6.31-6 and 2.6.31-9 where saa7134 is mentioned

Kerenel 2.6.31-6  (Working)
.....
[    5.742837] saa7130/34: v4l2 driver version 0.2.15 loaded
[    5.743158] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[    5.743163]   alloc irq_desc for 18 on node -1
[    5.743165]   alloc kstat_irqs on node -1
[    5.743174] saa7134 0000:01:08.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
[    5.743180] saa7130[0]: found at 0000:01:08.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffffc00
[    5.743186] saa7130[0]: subsystem: 1131:0000, board: Sabrent SBT-TVFM (saa7130) [card=42,insmod option]
[    5.743208] saa7130[0]: board init: gpio is 60c000
[    5.743213] IRQ 18/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    5.844345] saa7130[0]: Huh, no eeprom present (err=-5)?
[    5.844350] i2c-adapter i2c-2: Invalid 7-bit address 0x7a
[    6.244021] All bytes are equal. It is not a TEA5767
[    6.244093] tuner 2-0060: chip found @ 0xc0 (saa7130[0])
[    6.268030] tuner-simple 2-0060: creating new instance
[    6.268035] tuner-simple 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[    6.276134] saa7130[0]: registered device video0 [v4l2]
[    6.276153] saa7130[0]: registered device vbi0
[    6.276172] saa7130[0]: registered device radio0
[    6.546914] saa7134 ALSA driver for DMA sound loaded
[    6.546919] saa7130[0]/alsa: Sabrent SBT-TVFM (saa7130) doesn't support digital audio
.....



Kerenel 2.6.31-9   (Not working)
.....
[    6.306747] saa7130/34: v4l2 driver version 0.2.15 loaded
[    6.307069] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[    6.307074]   alloc irq_desc for 18 on node -1
[    6.307076]   alloc kstat_irqs on node -1
[    6.307086] saa7134 0000:01:08.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
[    6.307092] saa7130[0]: found at 0000:01:08.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffffc00
[    6.307098] saa7130[0]: subsystem: 1131:0000, board: Sabrent SBT-TVFM (saa7130) [card=42,insmod option]
[    6.307116] saa7130[0]: board init: gpio is 60c000
[    6.307121] IRQ 18/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    6.408165] saa7130[0]: Huh, no eeprom present (err=-5)?
[    6.408170] i2c-adapter i2c-2: Invalid 7-bit address 0x7a
[    6.812410] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    6.872018] Chip ID is not zero. It is not a TEA5767
[    6.872106] tuner 2-0060: chip found @ 0xc0 (saa7130[0])
[    6.882449] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[    6.882456] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[    6.882486] HDA Intel 0000:00:05.0: setting latency timer to 64
[    6.892024] tuner-simple 2-0060: creating new instance
[    6.892028] tuner-simple 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[    6.900092] saa7130[0]: registered device video0 [v4l2]
[    6.900109] saa7130[0]: registered device vbi0
[    6.900125] saa7130[0]: registered device radio0
[    6.910217] saa7134 ALSA driver for DMA sound loaded
[    6.910221] saa7130[0]/alsa: Sabrent SBT-TVFM (saa7130) doesn't support digital audio
.....
Comment 5 landgraf 2009-09-14 03:13:35 UTC
I have Beholder FM 407,

$ cat /etc/modprobe.d/saa7134.conf 
options saa7134 card=124 tuner=38 secam=d gbuffers=4

It work properly in 2.6.30, but in 2.6.31 tvtuner (tvtime) work properly (with sound), radio (gqradio) doen't work (Error: Invalid argument). Device /dev/radio0 is exist.
Comment 6 Simon Arlott 2009-10-12 11:36:22 UTC
My SAA7134 cards are still working ok with 2.6.29, 2.6.31-rc8, 2.6.31, 2.6.32-rc3 (all from git, so version is not entirely accurate).

When tuning has stopped working in the past, it usually outputs some sort of success/error message at the time the device is tuned. It would be useful if you could compare the logs for this from each kernel.

e.g.
[95921.634031] tuner 2-0060: tv freq set to 682.12
[95925.854461] tuner 2-0043: tv freq set to 826.00
Comment 7 Tsvety Petrov 2009-10-13 18:40:42 UTC
Just tested again with current Ubuntu Karmic kernel 2.6.31-13 (as of Oct 13). The TV tuner works well, but the radio tuner still does not work (as described before - tuning is broken and only noise is heard). 
Is there an SAA7134 / tuner module option which I can use to obtain more detailed log information?
Comment 8 Vasiliy Temnikov 2009-10-22 18:27:59 UTC
Use this patch, Luke!
^_^

/* Patch for FM-tuners to fix problem "white noise/Secam DK" on radio */
/* for kernel 2.6.31-rc6-git1 */
/* Vasiliy Temnikov <vaka@newmail.ru> */

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1091,4 +1091,2 @@ static long __video_do_ioctl(struct file *file,
 			*id = vfd->current_norm;
-		else
-			ret = -EINVAL;
 
 		if (!ret)
 			dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
Comment 9 Tsvety Petrov 2009-11-05 19:08:41 UTC
I received the following message from James Henstridge in response to bug #422822 in Ubuntu bug tracker (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/422822):

"I ran into a similar issue with different hardware that might be the same bug (my report is bug 475165).

I found that my radio card could be tuned correctly if the video4linux 2 API was used, but failed if you tried to tune it using video4linux 1. Now the v4l1 support is handled through a module that translates the v4l1 calls to equivalent v4l2 calls, so if a bug exists in that code it would affect us both even though we have different hardware.

I wrote a patch for gnomeradio to get it to use v4l2, but the way it has been integrated means that it will use v4l1 in preference to v4l2. You can force it to use the v4l2 API by changing a gconf key though.

If you want to test my hypothesis, do the following:

1. Boot into a kernel that exhibits the tuning problem.
2. run gconf-editor, browse to /apps/gnomeradio and change the driver key from "any" to "v4l2".
3. Start gnomeradio and see if it can tune the radio."

I tested as suggested and now gnomeradio works again and can tune the radio!
So, most probably the problem is in v4l1 module, not in "saa7134" or "tuner" modules as I thought before.
Comment 10 matthias 2009-12-31 02:46:36 UTC
*** Bug 14966 has been marked as a duplicate of this bug. ***
Comment 11 pdleth 2010-06-06 05:58:44 UTC
 I have been using ubuntu 9.04 successfully since its inception. I usec the following commands to get tvtime to work.

sudo nano /etc/modprobe.d/saa7134        hit enter
next you will be asked for your password enter and press the enter key.

now in the nano editor, type the following lines pressing enter at the end of each one.

alias chr-major-81 videodev       enter
alias chr-major-81-0 saa7134      enter
options saa7134 card=42 tuner=43 oss=1       enter


now press the control key (ctrl) and the "x" key at the same time
you will be asked if you want to save file: saa7134 
say yes by pressing "y" key on the keyboard.
When I upgraded to 9.10 and most recently 10.04, I was unable to get tvtime working. I was told that it could be a kernel problem but as a newbe, I've been unable to go back to a working kernel.
Comment 12 pdleth 2010-06-06 06:12:43 UTC
here is more info.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: linux-image-2.6.32-22-generic 2.6.32-22.33
Regression: No
Reproducible: Yes
ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-22-generic i686
NonfreeKernelModules: nvidia
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Architecture: i386
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: pdleth 1146 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'ICH5'/'Intel ICH5 with ALC655 at irq 17'
   Mixer name : 'Realtek ALC655 rev 0'
   Components : 'AC97a:414c4760'
   Controls : 41
   Simple ctrls : 26
Date: Thu May 20 17:17:38 2010
HibernationDevice: RESUME=UUID=69dca19b-c71a-46ee-955a-efb5d628d2c9
InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429)
IwConfig:
 lo no wireless extensions.

 eth0 no wireless extensions.
MachineType: MICRO-STAR INC. MS-6728
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=34cf22d4-30c0-4f0b-aca0-11fd6a8add27 ro quiet splash
ProcEnviron:
 PATH=(custom, no user)
 LANG=en_US.utf8
 SHELL=/bin/bash
RelatedPackageVersions: linux-firmware 1.34
RfKill:

SourcePackage: linux
dmi.bios.date: 09/29/2004
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: V3.A
dmi.board.name: MS-6728
dmi.board.vendor: MICRO-STAR INC.
dmi.board.version: 2.00
dmi.chassis.asset.tag: 0123ABC
dmi.chassis.type: 3
dmi.chassis.vendor: Uknown Chassis Manufacture
dmi.chassis.version: Version 1.00
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV3.A:bd09/29/2004:svnMICRO-STARINC.:pnMS-6728:pvr2.00:rvnMICRO-STARINC.:rnMS-6728:rvr2.00:cvnUknownChassisManufacture:ct3:cvrVersion1.00:
dmi.product.name: MS-6728
dmi.product.version: 2.00
dmi.sys.vendor: MICRO-STAR INC.
    *   AlsaDevices.txt  (589 bytes, text/plain; charset="utf-8")
    * AplayDevices.txt (275 bytes, text/plain; charset="utf-8")
    * ArecordDevices.txt (526 bytes, text/plain; charset="utf-8")
    * BootDmesg.txt (50.4 KiB, text/plain; charset="utf-8")
    * Card0.Amixer.values.txt (5.4 KiB, text/plain; charset="utf-8")
    * Card0.Codecs.codec97.0.ac97.0.0.txt (701 bytes, text/plain; charset="utf-8")
    * Card0.Codecs.codec97.0.ac97.0.0.regs.txt (767 bytes, text/plain; charset="utf-8")
    * CurrentDmesg.txt (4.0 KiB, text/plain; charset="utf-8")
    * Dependencies.txt (1.3 KiB, text/plain; charset="utf-8")
    * Lspci.txt (11.0 KiB, text/plain; charset="utf-8")
    * Lsusb.txt (374 bytes, text/plain; charset="utf-8")
    * PciMultimedia.txt (1.6 KiB, text/plain; charset="utf-8")
    * ProcCpuinfo.txt (1.2 KiB, text/plain; charset="utf-8")
    * ProcInterrupts.txt (1.6 KiB, text/plain; charset="utf-8")
    * ProcModules.txt (2.2 KiB, text/plain; charset="utf-8")
    * UdevDb.txt (88.1 KiB, text/plain; charset="utf-8")
    * UdevLog.txt (190.1 KiB, text/plain; charset="utf-8")
    * WifiSyslog.txt (208.3 KiB, text/plain; charset="utf-8")
Comment 13 pdleth 2010-06-06 06:15:01 UTC
total 0
drwxr-xr-x  2 root root       60 2010-05-20 17:10 by-path
crw-rw----+ 1 root audio 116, 10 2010-05-20 17:10 controlC0
crw-rw----+ 1 root audio 116,  9 2010-05-20 17:11 pcmC0D0c
crw-rw----+ 1 root audio 116,  8 2010-05-20 17:17 pcmC0D0p
crw-rw----+ 1 root audio 116,  7 2010-05-20 17:10 pcmC0D1c
crw-rw----+ 1 root audio 116,  6 2010-05-20 17:10 pcmC0D2c
crw-rw----+ 1 root audio 116,  5 2010-05-20 17:10 pcmC0D3c
crw-rw----+ 1 root audio 116,  4 2010-05-20 17:11 pcmC0D4p
crw-rw----+ 1 root audio 116,  3 2010-05-20 17:10 seq
crw-rw----+ 1 root audio 116,  2 2010-05-20 17:10 timer
**** List of PLAYBACK Hardware Devices ****
card 0: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: ICH5 [Intel ICH5], device 4: Intel ICH - IEC958 [Intel ICH5 - IEC958]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
**** List of CAPTURE Hardware Devices ****
card 0: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: ICH5 [Intel ICH5], device 1: Intel ICH - MIC ADC [Intel ICH5 - MIC ADC]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: ICH5 [Intel ICH5], device 2: Intel ICH - MIC2 ADC [Intel ICH5 - MIC2 ADC]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: ICH5 [Intel ICH5], device 3: Intel ICH - ADC2 [Intel ICH5 - ADC2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  modified: 000000003fff0000 - 000000003fff8000 (ACPI data)
[    0.000000]  modified: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 2f89a000 - 300331ef
[    0.000000] ACPI: RSDP 000fa3a0 00014 (v00 AMI   )
[    0.000000] ACPI: RSDT 3fff0000 0002C (v01 AMIINT INTEL865 00000010 MSFT 00000097)
[    0.000000] ACPI: FACP 3fff0030 00081 (v01 AMIINT INTEL865 00000011 MSFT 00000097)
[    0.000000] ACPI: DSDT 3fff0120 037D5 (v01  INTEL    I865G 00001000 MSFT 0100000D)
[    0.000000] ACPI: FACS 3fff8000 00040
[    0.000000] ACPI: APIC 3fff00c0 0005C (v01 AMIINT INTEL865 00000009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [002f89a000 - 00300331ef]          RAMDISK ==> [002f89a000 - 00300331ef]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00008da000 - 00008dd124]              BRK ==> [00008da000 - 00008dd124]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00fc0f0] fc0f0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34530 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u2097152
[    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=34cf22d4-30c0-4f0b-aca0-11fd6a8add27 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5242240 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[    0.000000] Memory: 1017304k/1048512k available (4673k kernel code, 30104k reserved, 2121k data, 656k init, 139208k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590653 - 0xc07a2e48   (2121 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590653   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2600.112 MHz processor.
[    0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.22 BogoMIPS (lpj=10400448)
[    0.008032] Security Framework initialized
[    0.008067] AppArmor: AppArmor initialized
[    0.008077] Mount-cache hash table entries: 512
[    0.008281] Initializing cgroup subsys ns
[    0.008288] Initializing cgroup subsys cpuacct
[    0.008295] Initializing cgroup subsys memory
[    0.008306] Initializing cgroup subsys devices
[    0.008310] Initializing cgroup subsys freezer
[    0.008314] Initializing cgroup subsys net_cls
[    0.008347] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.008352] CPU: L2 cache: 512K
[    0.008356] CPU: Physical Processor ID: 0
[    0.008358] CPU: Processor Core ID: 0
[    0.008363] mce: CPU supports 4 MCE banks
[    0.008377] CPU0: Thermal monitoring enabled (TM1)
[    0.008393] Performance Events: no PMU driver, software events only.
[    0.008403] Checking 'hlt' instruction... OK.
[    0.027770] ACPI: Core revision 20090903
[    0.036674] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.036681] ftrace: allocating 21771 entries in 43 pages
[    0.040114] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.040418] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.083618] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
[    0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.012000] Initializing CPU#1
[    0.012000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.012000] CPU: L2 cache: 512K
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 0
[    0.012000] CPU1: Thermal monitoring enabled (TM1)
[    0.168072] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
[    0.168092] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.172033] Brought up 2 CPUs
[    0.172039] Total of 2 processors activated (10400.75 BogoMIPS).
[    0.172273] CPU0 attaching sched-domain:
[    0.172280]  domain 0: span 0-1 level SIBLING
[    0.172284]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.172294]   domain 1: span 0-1 level MC
[    0.172298]    groups: 0-1 (cpu_power = 1178)
[    0.172309] CPU1 attaching sched-domain:
[    0.172312]  domain 0: span 0-1 level SIBLING
[    0.172316]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.172326]   domain 1: span 0-1 level MC
[    0.172330]    groups: 0-1 (cpu_power = 1178)
[    0.172504] devtmpfs: initialized
[    0.172504] regulator: core version 0.5
[    0.172504] Time: 21:10:44  Date: 05/20/10
[    0.172504] NET: Registered protocol family 16
[    0.172504] Trying to unpack rootfs image as initramfs...
[    0.172504] EISA bus registered
[    0.172504] ACPI: bus type pci registered
[    0.176942] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
[    0.176949] PCI: Using configuration type 1 for base access
[    0.179490] bio: create slab <bio-0> at 0
[    0.181160] ACPI: EC: Look up EC in DSDT
[    0.191463] ACPI: Interpreter enabled
[    0.191482] ACPI: (supports S0 S1 S4 S5)
[    0.191526] ACPI: Using IOAPIC for interrupt routing
[    0.200441] ACPI: Power Resource [URP1] (off)
[    0.200517] ACPI: Power Resource [URP2] (off)
[    0.200576] ACPI: Power Resource [FDDP] (off)
[    0.200633] ACPI: Power Resource [LPTP] (off)
[    0.200917] ACPI: No dock devices found.
[    0.201168] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.201250] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.201266] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
[    0.201393] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[    0.201516] pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
[    0.201609] pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f]
[    0.201682] pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
[    0.201755] pci 0000:00:1d.3: reg 20 io port: [0xd800-0xd81f]
[    0.201835] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7fff800-0xf7fffbff]
[    0.201911] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.201920] pci 0000:00:1d.7: PME# disabled
[    0.202040] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.202057] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[    0.202070] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO
[    0.202110] pci 0000:00:1f.1: reg 10 io port: [0xec00-0xec07]
[    0.202123] pci 0000:00:1f.1: reg 14 io port: [0xe800-0xe803]
[    0.202134] pci 0000:00:1f.1: reg 18 io port: [0xe400-0xe407]
[    0.202145] pci 0000:00:1f.1: reg 1c io port: [0xe000-0xe003]
[    0.202158] pci 0000:00:1f.1: reg 20 io port: [0xdc00-0xdc0f]
[    0.202173] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.202222] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[    0.202234] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[    0.202245] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[    0.202255] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[    0.202265] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[    0.202337] pci 0000:00:1f.3: reg 20 io port: [0xc00-0xc1f]
[    0.202404] pci 0000:00:1f.5: reg 10 io port: [0xc800-0xc8ff]
[    0.202416] pci 0000:00:1f.5: reg 14 io port: [0xc400-0xc43f]
[    0.202427] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf7fff600-0xf7fff7ff]
[    0.202438] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf7fff500-0xf7fff5ff]
[    0.202479] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.202487] pci 0000:00:1f.5: PME# disabled
[    0.202556] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff]
[    0.202569] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff]
[    0.202582] pci 0000:01:00.0: reg 18 32bit mmio: [0xf6000000-0xf6ffffff]
[    0.202610] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7de0000-0xf7dfffff]
[    0.202700] pci 0000:00:01.0: bridge 32bit mmio: [0xf3d00000-0xf7dfffff]
[    0.202709] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd3c00000-0xf3bfffff]
[    0.202766] pci 0000:02:02.0: reg 10 32bit mmio: [0xf7effc00-0xf7efffff]
[    0.202827] pci 0000:02:02.0: supports D1 D2
[    0.202877] pci 0000:02:06.0: reg 10 io port: [0xbc00-0xbcff]
[    0.202889] pci 0000:02:06.0: reg 14 32bit mmio: [0xf7effb00-0xf7effbff]
[    0.202922] pci 0000:02:06.0: reg 30 32bit mmio pref: [0xf7ec0000-0xf7edffff]
[    0.202948] pci 0000:02:06.0: supports D1 D2
[    0.202953] pci 0000:02:06.0: PME# supported from D1 D2 D3hot D3cold
[    0.202960] pci 0000:02:06.0: PME# disabled
[    0.203009] pci 0000:00:1e.0: transparent bridge
[    0.203018] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[    0.203026] pci 0000:00:1e.0: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
[    0.203047] pci_bus 0000:00: on NUMA node 0
[    0.203062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.203298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[    0.209604] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.209797] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.209974] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.210270] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.210449] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.210637] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.210844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.211110] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12 14 15)
[    0.211389] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.211400] vgaarb: loaded
[    0.211661] SCSI subsystem initialized
[    0.211910] libata version 3.00 loaded.
[    0.212126] usbcore: registered new interface driver usbfs
[    0.212156] usbcore: registered new interface driver hub
[    0.212222] usbcore: registered new device driver usb
[    0.212622] ACPI: WMI: Mapper loaded
[    0.212628] PCI: Using ACPI for IRQ routing
[    0.212966] NetLabel: Initializing
[    0.212972] NetLabel:  domain hash size = 128
[    0.212976] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.213012] NetLabel:  unlabeled traffic allowed by default
[    0.213198] hpet clockevent registered
[    0.213206] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.213215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.213228] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.216055] Switching to clocksource tsc
[    0.220575] AppArmor: AppArmor Filesystem Enabled
[    0.220609] pnp: PnP ACPI init
[    0.220642] ACPI: bus type pnp registered
[    0.226723] pnp: PnP ACPI: found 13 devices
[    0.226731] ACPI: ACPI bus type pnp unregistered
[    0.226739] PnPBIOS: Disabled by ACPI PNP
[    0.226769] system 00:01: ioport range 0x290-0x297 has been reserved
[    0.226777] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[    0.226784] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.226790] system 00:01: ioport range 0x400-0x43f has been reserved
[    0.226799] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.226806] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.261813] pci 0000:02:06.0: BAR 6: address space collision on of device [0xf7ec0000-0xf7edffff]
[    0.261853] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.261858] pci 0000:00:01.0:   IO window: disabled
[    0.261867] pci 0000:00:01.0:   MEM window: 0xf3d00000-0xf7dfffff
[    0.261875] pci 0000:00:01.0:   PREFETCH window: 0xd3c00000-0xf3bfffff
[    0.261888] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.261902] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
[    0.261917] pci 0000:00:1e.0:   MEM window: 0xf7e00000-0xf7efffff
[    0.261926] pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x400fffff
[    0.261955] pci 0000:00:1e.0: setting latency timer to 64
[    0.261964] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.261970] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.261976] pci_bus 0000:01: resource 1 mem: [0xf3d00000-0xf7dfffff]
[    0.261982] pci_bus 0000:01: resource 2 pref mem [0xd3c00000-0xf3bfffff]
[    0.261988] pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff]
[    0.261993] pci_bus 0000:02: resource 1 mem: [0xf7e00000-0xf7efffff]
[    0.261999] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x400fffff]
[    0.262005] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.262011] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.262091] NET: Registered protocol family 2
[    0.262306] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.263121] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.264570] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.265399] TCP: Hash tables configured (established 131072 bind 65536)
[    0.265410] TCP reno registered
[    0.265633] NET: Registered protocol family 1
[    0.265830] pci 0000:01:00.0: Boot video device
[    0.266108] cpufreq-nforce2: No nForce2 chipset.
[    0.266167] Scanning for low memory corruption every 60 seconds
[    0.266393] audit: initializing netlink socket (disabled)
[    0.266415] type=2000 audit(1274389843.263:1): initialized
[    0.278581] highmem bounce pool size: 64 pages
[    0.278592] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.282256] VFS: Disk quotas dquot_6.5.2
[    0.282432] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.283878] fuse init (API version 7.13)
[    0.284099] msgmni has been set to 1716
[    0.284631] alg: No test for stdrng (krng)
[    0.284799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.284806] io scheduler noop registered
[    0.284810] io scheduler anticipatory registered
[    0.284815] io scheduler deadline registered
[    0.284906] io scheduler cfq registered (default)
[    0.285173] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.285239] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.285435] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.285443] ACPI: Power Button [PWRB]
[    0.285580] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.285586] ACPI: Power Button [PWRF]
[    0.286007] processor LNXCPU:00: registered as cooling_device0
[    0.286254] processor LNXCPU:01: registered as cooling_device1
[    0.293184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.293316] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.293534] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    0.294116] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.294339] 00:0b: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    0.296933] brd: module loaded
[    0.298078] loop: module loaded
[    0.298380] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.298610] ata_piix 0000:00:1f.1: version 2.13
[    0.298634] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.298650]   alloc irq_desc for 18 on node -1
[    0.298655]   alloc kstat_irqs on node -1
[    0.298668] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.298750] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.298913] isapnp: Scanning for PnP cards...
[    0.348062] scsi0 : ata_piix
[    0.391904] scsi1 : ata_piix
[    0.392068] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[    0.392075] ata2: PATA max UDMA/100 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[    0.392129] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.392139] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.392223] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.435947] scsi2 : ata_piix
[    0.436146] scsi3 : ata_piix
[    0.438922] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.438931] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    0.439879] Fixed MDIO Bus: probed
[    0.439962] PPP generic driver version 2.4.2
[    0.440086] tun: Universal TUN/TAP device driver, 1.6
[    0.440090] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.440318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.440370]   alloc irq_desc for 23 on node -1
[    0.440376]   alloc kstat_irqs on node -1
[    0.440389] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.440417] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.440424] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.440497] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.440549] ehci_hcd 0000:00:1d.7: debug port 1
[    0.444448] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[    0.444503] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
[    0.492070] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.492328] usb usb1: configuration #1 chosen from 1 choice
[    0.492394] hub 1-0:1.0: USB hub found
[    0.492414] hub 1-0:1.0: 8 ports detected
[    0.492579] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.492619] uhci_hcd: USB Universal Host Controller Interface driver
[    0.492700]   alloc irq_desc for 16 on node -1
[    0.492705]   alloc kstat_irqs on node -1
[    0.492718] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.492732] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.492739] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.492834] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.492882] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[    0.493095] usb usb2: configuration #1 chosen from 1 choice
[    0.493162] hub 2-0:1.0: USB hub found
[    0.493186] hub 2-0:1.0: 2 ports detected
[    0.493294]   alloc irq_desc for 19 on node -1
[    0.493299]   alloc kstat_irqs on node -1
[    0.493311] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.493323] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.493330] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.493428] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.493470] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[    0.493662] usb usb3: configuration #1 chosen from 1 choice
[    0.493723] hub 3-0:1.0: USB hub found
[    0.493737] hub 3-0:1.0: 2 ports detected
[    0.493832] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.493845] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.493852] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.493955] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.493986] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    0.494189] usb usb4: configuration #1 chosen from 1 choice
[    0.494250] hub 4-0:1.0: USB hub found
[    0.494265] hub 4-0:1.0: 2 ports detected
[    0.494364] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.494376] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.494383] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.494458] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.494488] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[    0.494708] usb usb5: configuration #1 chosen from 1 choice
[    0.494770] hub 5-0:1.0: USB hub found
[    0.494787] hub 5-0:1.0: 2 ports detected
[    0.494999] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.504482] Freeing initrd memory: 7780k freed
[    0.516265] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.516286] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.516548] mice: PS/2 mouse device common for all mice
[    0.516758] rtc_cmos 00:04: RTC can wake from S4
[    0.516837] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.516869] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.517111] device-mapper: uevent: version 1.0.3
[    0.517386] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.517518] device-mapper: multipath: version 1.1.0 loaded
[    0.517523] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.517738] EISA: Probing bus 0 at eisa.0
[    0.517785] EISA: Detected 0 cards.
[    0.517930] cpuidle: using governor ladder
[    0.517934] cpuidle: using governor menu
[    0.518898] TCP cubic registered
[    0.519150] NET: Registered protocol family 10
[    0.520191] lo: Disabled Privacy Extensions
[    0.520921] NET: Registered protocol family 17
[    0.521015] Using IPI No-Shortcut mode
[    0.521179] PM: Resume from disk failed.
[    0.521202] registered taskstats version 1
[    0.521535]   Magic number: 10:341:197
[    0.521614] acpi PNP0100:00: hash matches
[    0.521654] rtc_cmos 00:04: setting system clock to 2010-05-20 21:10:44 UTC (1274389844)
[    0.521660] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.521663] EDD information not available.
[    0.534852] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.614738] ata1.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS04, max UDMA/66
[    0.614798] ata1.01: ATAPI: Hewlett-Packard CD-Writer Plus 9500b, 1.04, max MWDMA2
[    0.663883] ata4.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133
[    0.663889] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.670818] isapnp: No Plug & Play device found
[    0.671137] ata1.00: configured for UDMA/66
[    0.671956] ata4.00: configured for UDMA/133
[    0.683773] ata1.01: configured for MWDMA2
[    0.685384] scsi 0:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-1693S KS04 PQ: 0 ANSI: 5
[    0.689454] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    0.689459] Uniform CD-ROM driver Revision: 3.20
[    0.689626] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.689723] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.693312] scsi 0:0:1:0: CD-ROM            HP       CD-Writer+ 9500b 1.04 PQ: 0 ANSI: 5
[    0.699108] sr1: scsi3-mmc drive: 24x/32x writer cd/rw xa/form2 cdda tray
[    0.699244] sr 0:0:1:0: Attached scsi CD-ROM sr1
[    0.699329] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    0.699560] scsi 3:0:0:0: Direct-Access     ATA      WDC WD800JD-55MU 10.0 PQ: 0 ANSI: 5
[    0.699793] sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    0.699820] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    0.699932] sd 3:0:0:0: [sda] Write Protect is off
[    0.699937] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.699979] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.700203]  sda: sda1 sda2 sda3 < sda5 > sda4
[    0.744391] sd 3:0:0:0: [sda] Attached SCSI disk
[    0.744414] Freeing unused kernel memory: 656k freed
[    0.745398] Write protecting the kernel text: 4676k
[    0.745475] Write protecting the kernel read-only data: 1840k
[    0.779170] udev: starting version 151
[    1.036405] Floppy drive(s): fd0 is 1.44M
[    1.047406] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.047445]   alloc irq_desc for 20 on node -1
[    1.047451]   alloc kstat_irqs on node -1
[    1.047464] r8169 0000:02:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.047531] r8169 0000:02:06.0: no PCI Express capability
[    1.053536] eth0: RTL8110s at 0xf8068b00, 00:13:d3:64:9e:a7, XID 04000000 IRQ 20
[    1.055344] FDC 0 is a post-1991 82077
[    1.139545] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    1.313765] usb 5-1: configuration #1 chosen from 1 choice
[    1.568591] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.033783] Adding 2867560k swap on /dev/sda5.  Priority:-1 extents:1 across:2867560k 
[    3.333530] udev: starting version 151
[    4.187686] lp: driver loaded but no devices found
[    4.199129] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.369564] parport_pc 00:0c: reported by Plug and Play ACPI
[    4.369701] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    4.469057] lp0: using parport0 (interrupt-driven).
[    4.491032] ppdev: user-space parallel port driver
[    4.529840] psmouse serio1: ID: 10 00 64
[    4.696978] type=1505 audit(1274389848.674:2):  operation="profile_load" pid=426 name="/sbin/dhclient3"
[    4.697740] type=1505 audit(1274389848.674:3):  operation="profile_load" pid=426 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    4.698067] type=1505 audit(1274389848.674:4):  operation="profile_load" pid=426 name="/usr/lib/connman/scripts/dhclient-script"
[    4.871344] Linux agpgart interface v0.103
[    4.893450] intel_rng: FWH not detected
[    5.062406] vga16fb: initializing
[    5.062416] vga16fb: mapped to 0xc00a0000
[    5.062869] fb0: VGA16 VGA frame buffer device
[    5.149204] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    5.697496] nvidia: module license 'NVIDIA' taints kernel.
[    5.697503] Disabling lock debugging due to kernel taint
[    6.147168] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    6.153622] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    6.171093] Linux video capture interface: v2.00
[    6.389794] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.393483] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.22  Sun Nov  8 20:26:31 PST 2009
[    6.821715] Console: switching to colour frame buffer device 80x30
[    6.869168] saa7130/34: v4l2 driver version 0.2.15 loaded
[    6.869275] saa7134 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.869288] saa7130[0]: found at 0000:02:02.0, rev: 1, irq: 18, latency: 32, mmio: 0xf7effc00
[    6.869300] saa7134: <rant>
[    6.869302] saa7134:  Congratulations!  Your TV card vendor saved a few
[    6.869304] saa7134:  cents for a eeprom, thus your pci board has no
[    6.869307] saa7134:  subsystem ID and I can't identify it automatically
[    6.869309] saa7134: </rant>
[    6.869311] saa7134: I feel better now.  Ok, here are the good news:
[    6.869313] saa7134: You can use the card=<nr> insmod option to specify
[    6.869316] saa7134: which board do you have.  The list:
[    6.869323] saa7134:   card=0 -> UNKNOWN/GENERIC                         
[    6.869331] saa7134:   card=1 -> Proteus Pro [philips reference design]   1131:2001 1131:2001
[    6.869341] saa7134:   card=2 -> LifeView FlyVIDEO3000                    5168:0138 4e42:0138
[    6.869352] saa7134:   card=3 -> LifeView/Typhoon FlyVIDEO2000            5168:0138 4e42:0138
[    6.869363] saa7134:   card=4 -> EMPRESS                                  1131:6752
[    6.869371] saa7134:   card=5 -> SKNet Monster TV                         1131:4e85
[    6.869379] saa7134:   card=6 -> Tevion MD 9717                          
[    6.869386] saa7134:   card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01
[    6.869397] saa7134:   card=8 -> Terratec Cinergy 400 TV                  153b:1142
[    6.869406] saa7134:   card=9 -> Medion 5044                             
[    6.869413] saa7134:   card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI      
[    6.869420] saa7134:   card=11 -> Terratec Cinergy 600 TV                  153b:1143
[    6.869519] saa7134:   card=12 -> Medion 7134                              16be:0003 16be:5000
[    6.869528] saa7134:   card=13 -> Typhoon TV+Radio 90031                  
[    6.869532] saa7134:   card=14 -> ELSA EX-VISION 300TV                     1048:226b
[    6.869538] saa7134:   card=15 -> ELSA EX-VISION 500TV                     1048:226a
[    6.869544] saa7134:   card=16 -> ASUS TV-FM 7134                          1043:4842 1043:4830 1043:4840
[    6.869554] saa7134:   card=17 -> AOPEN VA1000 POWER                       1131:7133
[    6.869560] saa7134:   card=18 -> BMK MPEX No Tuner                       
[    6.869564] saa7134:   card=19 -> Compro VideoMate TV                      185b:c100
[    6.869570] saa7134:   card=20 -> Matrox CronosPlus                        102b:48d0
[    6.869576] saa7134:   card=21 -> 10MOONS PCI TV CAPTURE CARD              1131:2001
[    6.869583] saa7134:   card=22 -> AverMedia M156 / Medion 2819             1461:a70b
[    6.869589] saa7134:   card=23 -> BMK MPEX Tuner                          
[    6.869593] saa7134:   card=24 -> KNC One TV-Station DVR                   1894:a006
[    6.869599] saa7134:   card=25 -> ASUS TV-FM 7133                          1043:4843
[    6.869606] saa7134:   card=26 -> Pinnacle PCTV Stereo (saa7134)           11bd:002b
[    6.869612] saa7134:   card=27 -> Manli MuchTV M-TV002                    
[    6.869616] saa7134:   card=28 -> Manli MuchTV M-TV001                    
[    6.869621] saa7134:   card=29 -> Nagase Sangyo TransGear 3000TV           1461:050c
[    6.869627] saa7134:   card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4
[    6.869633] saa7134:   card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card  1019:4cb5
[    6.869639] saa7134:   card=32 -> AVACS SmartTV                           
[    6.869644] saa7134:   card=33 -> AVerMedia DVD EZMaker                    1461:10ff
[    6.869650] saa7134:   card=34 -> Noval Prime TV 7133                     
[    6.869654] saa7134:   card=35 -> AverMedia AverTV Studio 305              1461:2115
[    6.869660] saa7134:   card=36 -> UPMOST PURPLE TV                         12ab:0800
[    6.869666] saa7134:   card=37 -> Items MuchTV Plus / IT-005              
[    6.869671] saa7134:   card=38 -> Terratec Cinergy 200 TV                  153b:1152
[    6.869677] saa7134:   card=39 -> LifeView FlyTV Platinum Mini             5168:0212 4e42:0212 5169:1502
[    6.869686] saa7134:   card=40 -> Compro VideoMate TV PVR/FM               185b:c100
[    6.869692] saa7134:   card=41 -> Compro VideoMate TV Gold+                185b:c100
[    6.869698] saa7134:   card=42 -> Sabrent SBT-TVFM (saa7130)              
[    6.869702] saa7134:   card=43 -> :Zolid Xpert TV7134                     
[    6.869707] saa7134:   card=44 -> Empire PCI TV-Radio LE                  
[    6.869712] saa7134:   card=45 -> Avermedia AVerTV Studio 307              1461:9715
[    6.869718] saa7134:   card=46 -> AVerMedia Cardbus TV/Radio (E500)        1461:d6ee
[    6.869724] saa7134:   card=47 -> Terratec Cinergy 400 mobile              153b:1162
[    6.869730] saa7134:   card=48 -> Terratec Cinergy 600 TV MK3              153b:1158
[    6.869736] saa7134:   card=49 -> Compro VideoMate Gold+ Pal               185b:c200
[    6.869742] saa7134:   card=50 -> Pinnacle PCTV 300i DVB-T + PAL           11bd:002d
[    6.869748] saa7134:   card=51 -> ProVideo PV952                           1540:9524
[    6.869754] saa7134:   card=52 -> AverMedia AverTV/305                     1461:2108
[    6.869760] saa7134:   card=53 -> ASUS TV-FM 7135                          1043:4845
[    6.869766] saa7134:   card=54 -> LifeView FlyTV Platinum FM / Gold        5168:0214 5168:5214 1489:0214 5168:0304
[    6.869776] saa7134:   card=55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere D 5168:0306 4e42:0306
[    6.869784] saa7134:   card=56 -> Avermedia AVerTV 307                     1461:a70a
[    6.869790] saa7134:   card=57 -> Avermedia AVerTV GO 007 FM               1461:f31f
[    6.869796] saa7134:   card=58 -> ADS Tech Instant TV (saa7135)            1421:0350 1421:0351 1421:0370 1421:1370
[    6.869806] saa7134:   card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 
[    6.869811] saa7134:   card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502
[    6.869820] saa7134:   card=61 -> Philips TOUGH DVB-T reference design     1131:2004
[    6.869826] saa7134:   card=62 -> Compro VideoMate TV Gold+II             
[    6.869830] saa7134:   card=63 -> Kworld Xpert TV PVR7134                 
[    6.869835] saa7134:   card=64 -> FlyTV mini Asus Digimatrix               1043:0210
[    6.869841] saa7134:   card=65 -> V-Stream Studio TV Terminator           
[    6.869845] saa7134:   card=66 -> Yuan TUN-900 (saa7135)                  
[    6.869850] saa7134:   card=67 -> Beholder BeholdTV 409 FM                 0000:4091
[    6.869856] saa7134:   card=68 -> GoTView 7135 PCI                         5456:7135
[    6.869862] saa7134:   card=69 -> Philips EUROPA V3 reference design       1131:2004
[    6.869868] saa7134:   card=70 -> Compro Videomate DVB-T300                185b:c900
[    6.869874] saa7134:   card=71 -> Compro Videomate DVB-T200                185b:c901
[    6.869880] saa7134:   card=72 -> RTD Embedded Technologies VFG7350        1435:7350
[    6.869886] saa7134:   card=73 -> RTD Embedded Technologies VFG7330        1435:7330
[    6.869892] saa7134:   card=74 -> LifeView FlyTV Platinum Mini2            14c0:1212
[    6.869898] saa7134:   card=75 -> AVerMedia AVerTVHD MCE A180              1461:1044
[    6.869904] saa7134:   card=76 -> SKNet MonsterTV Mobile                   1131:4ee9
[    6.869910] saa7134:   card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133)     11bd:002e
[    6.869916] saa7134:   card=78 -> ASUSTeK P7131 Dual                       1043:4862
[    6.869922] saa7134:   card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO
[    6.869927] saa7134:   card=80 -> ASUS Digimatrix TV                       1043:0210
[    6.869933] saa7134:   card=81 -> Philips Tiger reference design           1131:2018
[    6.869939] saa7134:   card=82 -> MSI TV@Anywhere plus                     1462:6231 1462:8624
[    6.869946] saa7134:   card=83 -> Terratec Cinergy 250 PCI TV              153b:1160
[    6.869952] saa7134:   card=84 -> LifeView FlyDVB Trio                     5168:0319
[    6.869958] saa7134:   card=85 -> AverTV DVB-T 777                         1461:2c05 1461:2c05
[    6.869966] saa7134:   card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301
[    6.869973] saa7134:   card=87 -> ADS Instant TV Duo Cardbus PTV331        0331:1421
[    6.869980] saa7134:   card=88 -> Tevion/KWorld DVB-T 220RF                17de:7201
[    6.869986] saa7134:   card=89 -> ELSA EX-VISION 700TV                     1048:226c
[    6.869992] saa7134:   card=90 -> Kworld ATSC110/115                       17de:7350 17de:7352
[    6.869999] saa7134:   card=91 -> AVerMedia A169 B                         1461:7360
[    6.870005] saa7134:   card=92 -> AVerMedia A169 B1                        1461:6360
[    6.870011] saa7134:   card=93 -> Medion 7134 Bridge #2                    16be:0005
[    6.870017] saa7134:   card=94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV  5168:3306 5168:3502 5168:3307 4e42:3502
[    6.870028] saa7134:   card=95 -> LifeView FlyVIDEO3000 (NTSC)             5169:0138
[    6.870034] saa7134:   card=96 -> Medion Md8800 Quadro                     16be:0007 16be:0008 16be:000d
[    6.870043] saa7134:   card=97 -> LifeView FlyDVB-S /Acorp TV134DS         5168:0300 4e42:0300
[    6.870050] saa7134:   card=98 -> Proteus Pro 2309                         0919:2003
[    6.870056] saa7134:   card=99 -> AVerMedia TV Hybrid A16AR                1461:2c00
[    6.870064] saa7134:   card=100 -> Asus Europa2 OEM                         1043:4860
[    6.870070] saa7134:   card=101 -> Pinnacle PCTV 310i                       11bd:002f
[    6.870076] saa7134:   card=102 -> Avermedia AVerTV Studio 507              1461:9715
[    6.870082] saa7134:   card=103 -> Compro Videomate DVB-T200A              
[    6.870087] saa7134:   card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid     0070:6700 0070:6701 0070:6702 0070:6703 0070:6704 0070:6705
[    6.870100] saa7134:   card=105 -> Terratec Cinergy HT PCMCIA               153b:1172
[    6.870106] saa7134:   card=106 -> Encore ENLTV                             1131:2342 1131:2341 3016:2344
[    6.870115] saa7134:   card=107 -> Encore ENLTV-FM                          1131:230f
[    6.870121] saa7134:   card=108 -> Terratec Cinergy HT PCI                  153b:1175
[    6.870127] saa7134:   card=109 -> Philips Tiger - S Reference design      
[    6.870131] saa7134:   card=110 -> Avermedia M102                           1461:f31e
[    6.870137] saa7134:   card=111 -> ASUS P7131 4871                          1043:4871
[    6.870143] saa7134:   card=112 -> ASUSTeK P7131 Hybrid                     1043:4876
[    6.870149] saa7134:   card=113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card  1019:4cb6
[    6.870156] saa7134:   card=114 -> KWorld DVB-T 210                         17de:7250
[    6.870162] saa7134:   card=115 -> Sabrent PCMCIA TV-PCB05                  0919:2003
[    6.870168] saa7134:   card=116 -> 10MOONS TM300 TV Card                    1131:2304
[    6.870174] saa7134:   card=117 -> Avermedia Super 007                      1461:f01d
[    6.870180] saa7134:   card=118 -> Beholder BeholdTV 401                    0000:4016
[    6.870186] saa7134:   card=119 -> Beholder BeholdTV 403                    0000:4036
[    6.870192] saa7134:   card=120 -> Beholder BeholdTV 403 FM                 0000:4037
[    6.870198] saa7134:   card=121 -> Beholder BeholdTV 405                    0000:4050
[    6.870204] saa7134:   card=122 -> Beholder BeholdTV 405 FM                 0000:4051
[    6.870210] saa7134:   card=123 -> Beholder BeholdTV 407                    0000:4070
[    6.870216] saa7134:   card=124 -> Beholder BeholdTV 407 FM                 0000:4071
[    6.870222] saa7134:   card=125 -> Beholder BeholdTV 409                    0000:4090
[    6.870228] saa7134:   card=126 -> Beholder BeholdTV 505 FM                 5ace:5050
[    6.870234] saa7134:   card=127 -> Beholder BeholdTV 507 FM / BeholdTV 509  5ace:5070 5ace:5090
[    6.870241] saa7134:   card=128 -> Beholder BeholdTV Columbus TVFM          0000:5201
[    6.870247] saa7134:   card=129 -> Beholder BeholdTV 607 FM                 5ace:6070
[    6.870253] saa7134:   card=130 -> Beholder BeholdTV M6                     5ace:6190
[    6.870259] saa7134:   card=131 -> Twinhan Hybrid DTV-DVB 3056 PCI          1822:0022
[    6.870265] saa7134:   card=132 -> Genius TVGO AM11MCE                     
[    6.870270] saa7134:   card=133 -> NXP Snake DVB-S reference design        
[    6.870274] saa7134:   card=134 -> Medion/Creatix CTX953 Hybrid             16be:0010
[    6.870280] saa7134:   card=135 -> MSI TV@nywhere A/D v1.1                  1462:8625
[    6.870286] saa7134:   card=136 -> AVerMedia Cardbus TV/Radio (E506R)       1461:f436
[    6.870292] saa7134:   card=137 -> AVerMedia Hybrid TV/Radio (A16D)         1461:f936
[    6.870298] saa7134:   card=138 -> Avermedia M115                           1461:a836
[    6.870304] saa7134:   card=139 -> Compro VideoMate T750                    185b:c900
[    6.870311] saa7134:   card=140 -> Avermedia DVB-S Pro A700                 1461:a7a1
[    6.870317] saa7134:   card=141 -> Avermedia DVB-S Hybrid+FM A700           1461:a7a2
[    6.870323] saa7134:   card=142 -> Beholder BeholdTV H6                     5ace:6290
[    6.870329] saa7134:   card=143 -> Beholder BeholdTV M63                    5ace:6191
[    6.870335] saa7134:   card=144 -> Beholder BeholdTV M6 Extra               5ace:6193
[    6.870341] saa7134:   card=145 -> AVerMedia MiniPCI DVB-T Hybrid M103      1461:f636 1461:f736
[    6.870348] saa7134:   card=146 -> ASUSTeK P7131 Analog                    
[    6.870353] saa7134:   card=147 -> Asus Tiger 3in1                          1043:4878
[    6.870359] saa7134:   card=148 -> Encore ENLTV-FM v5.3                     1a7f:2008
[    6.870365] saa7134:   card=149 -> Avermedia PCI pure analog (M135A)        1461:f11d
[    6.870371] saa7134:   card=150 -> Zogis Real Angel 220                    
[    6.870375] saa7134:   card=151 -> ADS Tech Instant HDTV                    1421:0380
[    6.870381] saa7134:   card=152 -> Asus Tiger Rev:1.00                      1043:4857
[    6.870388] saa7134:   card=153 -> Kworld Plus TV Analog Lite PCI           17de:7128
[    6.870394] saa7134:   card=154 -> Avermedia AVerTV GO 007 FM Plus          1461:f31d
[    6.870400] saa7134:   card=155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid  0070:6706 0070:6708
[    6.870407] saa7134:   card=156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid     0070:6707 0070:6709 0070:670a
[    6.870416] saa7134:   card=157 -> Avermedia AVerTV Studio 507UA            1461:a11b
[    6.870422] saa7134:   card=158 -> AVerMedia Cardbus TV/Radio (E501R)       1461:b7e9
[    6.870428] saa7134:   card=159 -> Beholder BeholdTV 505 RDS                0000:505b
[    6.870434] saa7134:   card=160 -> Beholder BeholdTV 507 RDS                0000:5071
[    6.870440] saa7134:   card=161 -> Beholder BeholdTV 507 RDS                0000:507b
[    6.870446] saa7134:   card=162 -> Beholder BeholdTV 607 FM                 5ace:6071
[    6.870452] saa7134:   card=163 -> Beholder BeholdTV 609 FM                 5ace:6090
[    6.870458] saa7134:   card=164 -> Beholder BeholdTV 609 FM                 5ace:6091
[    6.870464] saa7134:   card=165 -> Beholder BeholdTV 607 RDS                5ace:6072
[    6.870470] saa7134:   card=166 -> Beholder BeholdTV 607 RDS                5ace:6073
[    6.870476] saa7134:   card=167 -> Beholder BeholdTV 609 RDS                5ace:6092
[    6.870482] saa7134:   card=168 -> Beholder BeholdTV 609 RDS                5ace:6093
[    6.870488] saa7134:   card=169 -> Compro VideoMate S350/S300               185b:c900
[    6.870494] saa7134:   card=170 -> AverMedia AverTV Studio 505              1461:a115
[    6.870500] saa7134:   card=171 -> Beholder BeholdTV X7                     5ace:7595
[    6.870506] saa7134:   card=172 -> RoverMedia TV Link Pro FM                19d1:0138
[    6.870512] saa7134:   card=173 -> Zolid Hybrid TV Tuner PCI                1131:2004
[    6.870518] saa7134:   card=174 -> Asus Europa Hybrid OEM                   1043:4847
[    6.870525] saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
[    6.871895] saa7130[0]: board init: gpio is c04000
[    6.871906] IRQ 18/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    6.972256] saa7130[0]: Huh, no eeprom present (err=-5)?
[    6.972265] i2c i2c-0: Invalid 7-bit address 0x7a
[    6.972922] saa7130[0]: registered device video0 [v4l2]
[    6.973018] saa7130[0]: registered device vbi0
[    7.223706] saa7134 ALSA driver for DMA sound loaded
[    7.223715] saa7130[0]/alsa: UNKNOWN/GENERIC doesn't support digital audio
[    7.875494]   alloc irq_desc for 17 on node -1
[    7.875501]   alloc kstat_irqs on node -1
[    7.875519] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.875574] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    8.196025] intel8x0_measure_ac97_clock: measured 54615 usecs (2632 samples)
[    8.196031] intel8x0: clocking to 48000
[   10.416337] kjournald starting.  Commit interval 5 seconds
[   10.416590] EXT3 FS on sda2, internal journal
[   10.416600] EXT3-fs: mounted filesystem with ordered data mode.
[   11.746131] type=1505 audit(1274389855.723:5):  operation="profile_load" pid=712 name="/usr/share/gdm/guest-session/Xsession"
[   11.755157] type=1505 audit(1274389855.731:6):  operation="profile_replace" pid=713 name="/sbin/dhclient3"
[   11.763766] type=1505 audit(1274389855.739:7):  operation="profile_replace" pid=713 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.771042] type=1505 audit(1274389855.747:8):  operation="profile_replace" pid=713 name="/usr/lib/connman/scripts/dhclient-script"
[   12.091992] r8169: eth0: link up
[   12.104089] type=1505 audit(1274389856.079:9):  operation="profile_load" pid=714 name="/usr/bin/evince"
[   12.120792] type=1505 audit(1274389856.095:10):  operation="profile_load" pid=714 name="/usr/bin/evince-previewer"
[   12.127260] type=1505 audit(1274389856.103:11):  operation="profile_load" pid=714 name="/usr/bin/evince-thumbnailer"
[   12.289117] type=1505 audit(1274389856.266:12):  operation="profile_load" pid=721 name="/usr/lib/cups/backend/cups-pdf"
[   12.289841] type=1505 audit(1274389856.266:13):  operation="profile_load" pid=721 name="/usr/sbin/cupsd"
[   12.351719] type=1505 audit(1274389856.326:14):  operation="profile_load" pid=789 name="/usr/sbin/tcpdump"
Comment 15 Florian Mickler 2010-12-17 22:02:34 UTC
References: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/475165

Above comments suggest that this is fixed in 2.6.32-rc1 by:

commit 707ca1e30f087f9a6d144693dafc4b67880678c2
Author: Hans Verkuil <hverkuil@xs4all.nl>
Date:   Tue Sep 15 08:08:20 2009 -0300

    V4L/DVB (12948): v4l1-compat: fix VIDIOC_G_STD handling